OIWMCSR318916W80DUAL BAND IDEN REPEATER

June 4, 2007 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint NEMKO Canada Inc. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Dekolink Wireless, 12 Bazel St. petach-Tikva Israel, 49001. Dated this 04 Day of June 20 07 Agency agreement expiration date: December 31 st 2008 By: Shmuel Bleichman Signature Printed Title: Director of Engineering On behalf of : Dekolink Wireless Ltd. Telephone: +972-3-918-0180

Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-190-9180 e-mail: [email protected] web www.dekolink.com June 4, 2007 Equipment Authorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 CONFIDENTIALITY REQUEST FOR: FCC ID: OIWMCSR318916W80 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational description • Photos of circuits and amplifiers • User manual This dual band IDEN repeater is installed in an area, which is not readily accessible to the public and is strictly maintained by factory trained personnel only. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, June 4, 2007 Shmuel Bleichman, Director of Engineering Dekolink Wireless Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49001 Tel- 972-3-9180173 Fax-972-3-9180190

38.10 76.20 1 0-RELEASE 06.06.07 HE 19.06.07 19.06.07 1 1 NONE 0.1 LABEL 9713000096 HAIMEHAIM E 0.1 SPRINT 3189 9713000096 NOTE:1. MATERIAL: LABEL, SILVER METALIZED POLYESTER WITH 3M 467MP + PERMANENT ACRYLIC BACK ADHESIVE. 2. PRINTING: BLACK. 2.1 TEXT: HELVETICA MEDIUM.3. USE RIBBON ACCORDING TO LABEL MANUFACTURER RECOMMENDATION.4. FOR SERIAL NUMBER SEE LABEL INFORMATION.5. BAR CODE TYPE ACCORDING TO CODE-1286. THE LABELS MUST BE SUPPLIED ON ROLL. DO NOT SCALE DRAWING 1 2 3 4 5 6 A B C D C B A D DESCRIPTION 1 2 3 5 6 4 REV ECO # DATE APPROVED PART REV. DRAWN ALL DIMENSIONS ARE IN MM. SHARP EDGES 0.1-0.3mm DATE NAME CHECK. DESIGN SIGNTUR SHEET SCALE OF A3 BREAK SHARP CORNERS & MANGR TITLE BURR & FLASH Max. PROJCT Max. LINEAR MM HOLE + MMBETWEEN HOLES MM ANGULAR DRAFTANGLE/SIDE UNLESS OTHERWISE SPECIFIED PART No. This Document and Any Attachments Thereto Contain PropietaryConfidential and Privileged Information and Is for the Sole Use of theIntended Recipient(s). Any Unauthorized Review, Use, Reproduction,Disclosure or Distribution Is Strictly Prohibited. 9713000096.SLDDRW6/28/2007Page 1 of 1

Editor : M. Bard Deko3189 Date : 01.07.07 FCC Label FCC Label 3189DEKO FCC Label location Page 0 of 1

12/06/2007 Tune up procedure for DEKO3189 1. General 1.1. This Procedure is conducted by the customer using NMS, on “Controls and Params “ screen. 2. Procedure 2.1. Connect to unit using NMS (see Manual). 2.2. Chose “Controls and Params “ screen (see figure 1). Figure 1: NMS – Controls and Parameters Screen To setup the Control and operational Parameters of the Repeater, proceed as follows: Set the parameters that determine the Link in both Downlink or Uplink path by selecting the value for each checkbox from its adjacent dropdown list. 1 First, click on the box to enable RF Transmission: 1. Click on the LBDA Panel Mask checkbox if you want to determine manually the gain with the Power selector in the Repeater front panel. This feature disables the Max Power box selection, at left. 2. Click on RF Transmission Enable checkbox if you want to setup the Power and the Gain in this screen 3. Select the Max Power. 4. Select the Max Gain 5. Select the Delta Gain between the Downlink and Uplink 6. Click on Smart ALC On/Off box to enable the Smart ALC operation. The values of its operational parameters are set as fixed, and are displayed for information. 7. You can increase the Auto Gain per time Interval 8. Determine the time lapse in the Auto Gain increase by setting a Change Interval timeout in the checkbox (in hours) 2 3

Prediction of MPE limit at a given distance DEKO 3189 Down-link Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 31.30 (dBm) Maximum peak output power at antenna input terminal: 1348.962883 (mW) Antenna gain(typical): 0 (dBi) Maximum antenna gain: 1 (numeric) Prediction distance: 20 (cm) Prediction frequency: 860 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 0.573333333 (mW/cm^2) Power density at prediction frequency: 0.268368 (mW/cm^2) 2.683676 (W/m^2) Maximum allowable antenna gain: 3.296770475 (dBi) Margin of Compliance: 3.296770475 dB 2 4 R PG S π = Prediction of MPE limit at a given distance DEKO 3189 Up-link Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 22.15 (dBm) Maximum peak output power at antenna input terminal: 164.0589773 (mW) Antenna gain(typical): 0 (dBi) Maximum antenna gain: 1 (numeric) Prediction distance: 20 (cm) Prediction frequency: 898.5 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 0.599 (mW/cm^2) Power density at prediction frequency: 0.032638 (mW/cm^2) 0.326385 (W/m^2) Maximum allowable antenna gain: 12.63696678 (dBi) Margin of Compliance: 12.63696678 dB 2 4 R PG S π =

www.nemko.com Test Report: 87771-1TRFWL Applicant: Dekolink Wireless Ltd 16 Bazel St, Qiryat-Arieh, Petah-Tikva, 49510 Israel Apparatus: DEKO 3189 FCC ID: OIWMCSR318916W80 In Accordance With: FCC Part 90, Boosters Private Land Mobile Radio Services Tested By: Nemko Canada Inc. 303 River Road Ottawa, Ontario K1V 1H2 Authorized By: Xu Jin, Wireless Specialist Date: Total Number of Pages: 65 FCC Part 90 Boosters: October 2006 Nemko Canada Inc. REPORT SUMMARY Report Number: 87771-1TRFWL FCC ID: OIWMCSR318916W80 Specification: FCC Part 90 Report Summary These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 90. Conducted measurements were performed in accordance with ANSI TIA-603-B-2002. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. The assessment summary is as follows: Apparatus Assessed: DEKO 3189 Specification: FCC Part 90 Private Land Mobile Radio Services Compliance Status: Complies Exclusions: None Non-compliances: None Report Release History: Original Release Author: Roman Kuleba, EMC/Wireless Specialist Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Page 2 of 65 Nemko Canada Inc. REPORT SUMMARY Report Number: 87771-1TRFWL FCC ID: OIWMCSR318916W80 Specification: FCC Part 90 TABLE OF CONTENTS Report Summary.........................................................................................................................................2 Section 1: Equipment Under Test..............................................................................................................4 1.1 Product Identification.................................................................................................................................4 1.2 Samples Submitted for Assessment............................................................................................................4 1.3 Theory of Operation...................................................................................................................................4 1.4 Technical Specifications of the EUT..........................................................................................................5 Section 2: Test Conditions..........................................................................................................................6 2.1 Specifications.............................................................................................................................................6 2.2 Deviations From Laboratory Test Procedures ............................................................................................6 2.3 Test Environment.......................................................................................................................................6 2.4 Test Equipment...........................................................................................................................................6 Section 3: Observations..............................................................................................................................7 3.1 Modifications Performed During Assessment ............................................................................................7 3.2 Record Of Technical Judgements...............................................................................................................7 3.3 EUT Parameters Affecting Compliance.....................................................................................................7 3.4 Test Deleted................................................................................................................................................7 3.5 Additional Observations.............................................................................................................................7 Section 4: Results Summary......................................................................................................................8 4.1 FCC Part 90: Test Results..........................................................................................................................9 Appendix A: Test Results.........................................................................................................................10 Clause 90.205 Output Power ...............................................................................................................................10 Clause 90.210 Conducted Spurious Emissions....................................................................................................11 Clause 90.210 Radiated Spurious Emissions.......................................................................................................42 Clause 90.213 Frequency Stability......................................................................................................................43 Clause 2-11-04/EAB/RF Occupied Bandwidth...................................................................................................44 Clause 2-11-04/EAB/RF Out of Band Rejection...............................................................................................…

Text truncated - open the document above for the full version.