OJFLITENNA0009110In-Building RF Distribution System

FCC ID: OJFLITENNA0009110 EXHIBIT 3. Page 1 EXHIBIT 3. INSTALLATION AND OPERATING INSTRUCTIONS. FCC ID: OJFLITENNA0009110 EXHIBIT 3. Page 2 The following is a copy of Installation and Operating Instructions of Litenna™ Model 9110.

Installation and User’s Guide Copyright 1998 Preliminary Document Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D2 Installation and User’s Guide Corporate Headquarters: Foxcom Wireless Ofek One Center Building B Lod, Israel 71293 Tel: +972-8-918-3888 Fax: +972-8-918-3844 US Office: 8150 Leesburg Pike, Suite 600 Vienna, VA 22182 Tel: 703-848-0200 Fax: 703-848-0280 website: www.foxcomwireless.com email: [email protected] This manual contains PROPRIETARY and CONFIDENTIAL information of Foxcom Wireless. Reproduction, release to any third party, or any other unauthorized use, of any information contained herein is expressly prohibited. Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D3 Table of Contents 1. Front Chapter.................................................................................................................5 1. 1. Warranty and Repair Policy.......................................................................................5 1. 2. Reporting Defects......................................................................................................7 1. 3. Conventions..............................................................................................................7 1. 4. Precautions................................................................................................................7 2. Introduction to Litenna..................................................................................................9 2. 1. Litenna TM Models......................................................................................................9 2. 2. Features.....................................................................................................................9 2. 3. Product Drawings....................................................................................................10 2. 4. Block Diagram........................................................................................................13 3. Installation.....................................................................................................................15 3. 1. Fiber Installation Parts List......................................................................................15 3. 2. Set Up.....................................................................................................................15 3. 3. Panel Descriptions...................................................................................................18 3. 4. Performance Verification.........................................................................................19 3. 5. Alarm......................................................................................................................20 4. Product Specifications...................................................................................................21 5. Appendix I Path Loss Estimate....................................................................................25 List of Figures Figure 1 - Base Unit 4 ports...............................................................................................10 Figure 2 - Base Unit 8 ports...............................................................................................10 Figure 3 - Base Unit Front Panels........................................................................................11 Figure 4 - Base Unit Back Panels........................................................................................11 Figure 5 - Remote Hub Unit................................................................................................12 Figure 6 - Remote Hub Unit Front Panel.............................................................................12 Figure 7 - Litenna TM Block Diagram for 8 Remote Hub Unit Set Up....................................13 Figure 8 - Accessory Plate on Remote Hub Unit..................................................................17 Figure 9 - Base Unit Front Panel.........................................................................................18 Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D4 List of Tables Table 1 - Fiber Installation Parts List...................................................................................15 Table 2 - Base Unit.............................................................................................................18 Table 3 - Remote Hub Unit.................................................................................................19 Table 4 - Optical LED States...............................................................................................20 Table 5 - Products Specifications TDMA(IS-136)/AMPS(IS-54).........................................21 Table 6 - Products Specifications GSM 900.........................................................................21 Table 7 - Products Specifications LMR 800.........................................................................22 Table 8 - Cable Specifications..............................................................................................22 Table 9 - General Technical Specifications...........................................................................22 Table 10 - Environmental Conditions...................................................................................23 Table 11 - Physical Specifications........................................................................................23 Table 12 - 25 Pin Alarm Pinouts..........................................................................................24 Table 13 - Path Loss Estimates............................................................................................25 Litenna Installation and User’s GuideFront Chapter Foxcom Wirele…

Text truncated - open the document above for the full version.

FCC ID: OJFLITENNA0009110 EXHIBIT 1. Page 1 EXHIBIT 1. COVER LETTER. FCC ID: OJFLITENNA0009110 EXHIBIT 1. Page 2 TO: Federal Communications Commission ATTN: Jaunice Green, Application Processing Branch FROM: Foxcom Wireless Ltd. DATE: 20 May, 1999 ______________________________________________________________________ Reference Number: 7604 Subject: Litenna™ Model 9110, Form 731 Confirmation Number EA94021 . 1. Litenna™ Model 9110 is subject to FCC authorization by certification procedure pursuant 47CFR Sections 2.1031 through 2.1043. 2. Please find attached Exhibits 2 through 10 in accordance with the following list: EXHIBIT 2. IDENTIFICATION LABEL ----- Pursuant 47CFR 2.983(f) EXHIBIT 3. INSTALLATION AND OPERATING INSTRUCTIONS ----- Pursuant 47CFR 2.1033(3). EXHIBIT 4. DESCRIPTION OF THE CIRCUIT FUNCTIONS AND BLOCK DIAGRAM ----- Pursuant 47CFR 2.1033(b)(4).and 47CFR 2.1033(b)(5). EXHIBIT 5. SCHEMATIC DIAGRAMS AND ACTIVE PARTS LIST ----- Pursuant 47CFR 2.1033(4) and 2.983(d)(6). EXHIBIT 6. MEASURED DATA ON CONDUCTED AND RADIATED EMISSIONS ------ Pursuant 47CFR 2.1033(6). ........................................................................................ a) POWER LINE CONDUCTED EMISSIONS ------ Pursuant 47 CFR 15.107. b) RADIATED FIELD EMISSIONS ------ Pursuant 47 CFR 15.109. EXHIBIT 7. MEASURED DATA ON OCCUPIED BANDWIDTH ------ Pursuant 47 CFR 2.989, 22.917(b). and MEASURED DATA ON CONDUCTED SPURIOUS EMISSIONS ------ Pursuant 47 CFR 2.991, 22.917(e). EXHIBIT 8. MEASURED DATA ON RADIATED HARMONICS AND SPURIOUS EMISSIONS ------ Pursuant 47 CFR 2.993 EXHIBIT 9. PHOTOGRAPHS OF THE LITENNA™ MODEL 9110 - EXTERNAL VIEW ------ Pursuant 47 CFR 2.975(a)(5). FCC ID: OJFLITENNA0009110 EXHIBIT 1. Page 3 EXHIBIT 10. PHOTOGRAPHS OF THE LITENNA™ MODEL 9110.-INTERNAL VIEW. ------ Pursuant 47 CFR 2.975(a)(5). 3. Pursuant to 47CFR Sections 0.457 and 0.459, we hereby request for the confidentiality of the following exhibits: EXHIBIT 4. DESCRIPTION OF THE CIRCUIT FUNCTIONS AND BLOCK DIAGRAM EXHIBIT 5. SCHEMATIC DIAGRAMS AND ACTIVE PARTS LIST EXHIBIT 10. PHOTOGRAPHS OF THE LITENNA™ MODEL 9110.-INTERNAL VIEW. Sincerely yours, Shlomo Cohen, QA Manager

FCC ID: OJFLITENNA0009110 EHXIBIT 9 Page 1 EXHIBIT 9. PHOTOGRAPHS OF THE LITENNA™ MODEL 9110 – EXTERNAL VIEW FCC ID: OJFLITENNA0009110 EHXIBIT 9 Page 2 Base Unit FCC ID: OJFLITENNA0009110 EHXIBIT 9 Page 3 FCC ID: OJFLITENNA0009110 EHXIBIT 9 Page 4 Remote Hub Unit FCC ID: OJFLITENNA0009110 EHXIBIT 9 Page 5 Power Supply Unit

FCC ID: OJFLITENNA0009110 EXHIBIT 2. Page 1 EXHIBIT 2. IDENTIFICATION LABEL FCC ID: OJFLITENNA0009110 EXHIBIT 2. Page 2 Pursuant 47CFR Section 2.983(f) see the identification label of Litenna™ Model 9110. Litenna TM Base Unit Model #: 9110-B8U Serial #: 9903G13991 FCC ID #: OJFLITENNA0009110 This device complies with Part 15 Class A and Part 90 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Ofek One Center, Building B, northern Industrial Litenna TM Power Supply Unit Model #: 9110-PSU Serial #: 9903G13993 FCC ID #: OJFLITENNA0009110 This device complies with Part 15 Class A and Part 90 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Litenna TM Remote Hub Unit Model #: 9110-RHU Serial #: 9903G13992 FCC ID #: OJFLITENNA0009110 This device complies with Part 15 Class A and Part 90 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: OJFLITENNA0009110 EXHIBIT 3. Page 1 EXHIBIT 3. INSTALLATION AND OPERATING INSTRUCTIONS. FCC ID: OJFLITENNA0009110 EXHIBIT 3. Page 2 The following is a copy of Installation and Operating Instructions of Litenna™ Model 9110.

Installation and User’s Guide Copyright 1998 Preliminary Document Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D2 Installation and User’s Guide Corporate Headquarters: Foxcom Wireless Ofek One Center Building B Lod, Israel 71293 Tel: +972-8-918-3888 Fax: +972-8-918-3844 US Office: 8150 Leesburg Pike, Suite 600 Vienna, VA 22182 Tel: 703-848-0200 Fax: 703-848-0280 website: www.foxcomwireless.com email: [email protected] This manual contains PROPRIETARY and CONFIDENTIAL information of Foxcom Wireless. Reproduction, release to any third party, or any other unauthorized use, of any information contained herein is expressly prohibited. Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D3 Table of Contents 1. Front Chapter.................................................................................................................5 1. 1. Warranty and Repair Policy.......................................................................................5 1. 2. Reporting Defects......................................................................................................7 1. 3. Conventions..............................................................................................................7 1. 4. Precautions................................................................................................................7 2. Introduction to Litenna..................................................................................................9 2. 1. Litenna TM Models......................................................................................................9 2. 2. Features.....................................................................................................................9 2. 3. Product Drawings....................................................................................................10 2. 4. Block Diagram........................................................................................................13 3. Installation.....................................................................................................................15 3. 1. Fiber Installation Parts List......................................................................................15 3. 2. Set Up.....................................................................................................................15 3. 3. Panel Descriptions...................................................................................................18 3. 4. Performance Verification.........................................................................................19 3. 5. Alarm......................................................................................................................20 4. Product Specifications...................................................................................................21 5. Appendix I Path Loss Estimate....................................................................................25 List of Figures Figure 1 - Base Unit 4 ports...............................................................................................10 Figure 2 - Base Unit 8 ports...............................................................................................10 Figure 3 - Base Unit Front Panels........................................................................................11 Figure 4 - Base Unit Back Panels........................................................................................11 Figure 5 - Remote Hub Unit................................................................................................12 Figure 6 - Remote Hub Unit Front Panel.............................................................................12 Figure 7 - Litenna TM Block Diagram for 8 Remote Hub Unit Set Up....................................13 Figure 8 - Accessory Plate on Remote Hub Unit..................................................................17 Figure 9 - Base Unit Front Panel.........................................................................................18 Litenna TM Installation and User’s Guide Foxcom Wireless Proprietary Information Document No. 40-93-005-15D4 List of Tables Table 1 - Fiber Installation Parts List...................................................................................15 Table 2 - Base Unit.............................................................................................................18 Table 3 - Remote Hub Unit.................................................................................................19 Table 4 - Optical LED States...............................................................................................20 Table 5 - Products Specifications TDMA(IS-136)/AMPS(IS-54).........................................21 Table 6 - Products Specifications GSM 900.........................................................................21 Table 7 - Products Specifications LMR 800.........................................................................22 Table 8 - Cable Specifications..............................................................................................22 Table 9 - General Technical Specifications...........................................................................22 Table 10 - Environmental Conditions...................................................................................23 Table 11 - Physical Specifications........................................................................................23 Table 12 - 25 Pin Alarm Pinouts..........................................................................................24 Table 13 - Path Loss Estimates............................................................................................25 Litenna Installation and User’s GuideFront Chapter Foxcom Wirele…

Text truncated - open the document above for the full version.

EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 1 EXHIBIT 8. MEASURED DATA ON RADIATED HARMONICS AND SPURIOUS EMISSIONS. EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 2 The following is a measured data on radiated harmonics and spurious emissions per 47CFR 2.993, which is the subject of Technical Report No.9FOX049T. EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 3 ELECTROMAGNETIC COMPATIBILITY TEST REPORT Compliance with Radiated Harmonics and Spurious Emissions Requirements of 47CFR Parts 2 and 22 Company Name:Foxcom Wireless Ltd. Equipment Under Test: Report I.D.Number:9FOX049T.DOC Total number of pages (including this page): 24 Date:25 April, 1999 EMI TEST Ltd. EMC Test Laboratory Moshav Hanniel, D.N.Lev Hasharon, Israel, 42865 Phone:(972) 9-8987382 Fax:(972) 9-8987383 ____________________________________________________ This report must not be reproduced, except in full, without the written permission of EMI Test Ltd. This report relates only to the items tested. EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 4 Table of Content: Description Page 1. GENERAL INFORMATION.8 2. APPLICABLE DOCUMENTS.9 3. DETAILED APPLICABLE EMC REQUIREMENTS AND LIMITS.10 4. TEST PROCEDURE FOR MEASUREMENT OF RF EMISSIONS FROM EQUIPMENT UNDER TEST (EUT).11 5. DESCRIPTION OF EQUIPMENT UNDER TEST.11 5.1 DESCRIPTION OF THE TESTED EQUIPMENT.11 5.2 THE TESTED CONFIGURATION.12 5.3 CABLES USED DURING THE TESTS:13 5.4 MODIFICATIONS REQUIRED FOR COMPLIANCE.13 6. DESCRIPTION OF THE TEST SITE.14 7. LIST OF TEST EQUIPMENT USED.15 8. SUMMARY OF TEST RESULTS.16 9. DETAILS OF TEST RESULTS.16 10. SIGNATURES.20 APPENDIX A. DERIVATION OF STANDARD LIMIT FOR FCC, PART 22 IN THE FREQUENCY RANGE 0.8 TO 9.0 GHZ.21 EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 5 List of Figures. FIG. 1Test setup for the measurements of radiated emissions at frequencies up to the tenth harmonic of the carrier frequency 9 FIG.2Test setup for the test site calibration for FCC, Part 22 measurements 10 Fig.3The tested configuration12 FIG.A-1Setup for the test site calibration for FCC, Part 22 measurements21 List of Tables: Table 1aDown_Link Transmit Mode @ 869MHz. Test Results for Radiated Emission at Harmonics of the Carrier Frequency in TX Mode. 17 Table 1bDown_Link Transmit Mode @ 881.5MHz. Test Results for Radiated Emission at Harmonics of the Carrier Frequency in TX Mode 18 Table 1cDown_Link Transmit Mode @ 894MHz. Test Results for Radiated Emission at Harmonics of the Carrier Frequency in TX Mode. 19 Table A-1Derivation of Standard Limit for Measurement of Radiated Harmonics and Spurious (per FCC Part 22). 21 Table A-2aDerivation of Standard Limit for Measurement of Radiated Harmonics and Spurious (per FCC Part 22), Vertical Polarization. Down-Link Transmission at 881.5MHz. 23 Table A-2bDerivation of Standard Limit for Measurement of Radiated Harmonics and Spurious (per FCC Part 22), Horizontal Polarization. Down-Link Transmission at 881.5MHz. 26 EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 6 1. General Information. Applicant: Foxcom Wireless Ltd. Applicant Address: Ofek One Center Building B, Northern Industrial Zone Lod, Israel 71293 Telephone: 972-8-9183818 FAX: 972-8-9183844 The testing was observed by the following applicant's personnel: Mr.Shlomo Cohen Date of reception for testing: March 14, 1999 Dates of testing: April 6, 1999 Test Laboratory Location: EMI TEST Ltd, Moshav Hanniel, P.O.Box 65, D.N.Lev Hasharon, Israel 42865 Equipment Under Test: Litenna™ Model 9110 Serial Numbers: TBD Mode of Operation: Down-Link Transmitting mode of Remote Hub Unit Year of Manufacture: 1999 Applicable EMC Specification: Federal Communication Commission (FCC), Out of Band Emissions - Radiated Field Strength: CFR 47, Part 22, Section 22.917(e) and CFR 47, Part 2, Sections 2.993 and 2.997. EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 7 2. Applicable Documents. 2.1 Federal Communication Commission (FCC), Code of Federal Regulations 47, Ch.1, Parts 2 and 22. 2.2 American National Standard, "Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10KHz to 1 GHz", ANSI C63.2, 1987. 2.3 American National Standard, "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9KHz to 40GHz", ANSI C63.4, 1992. EMI Test Report 9FOX049T FCC ID: OJFLITENNA0009110 EHXIBIT 8 Page 8 3. Detailed Applicable EMC Requirements and Limits. Requirements of Federal Communications Commission (FCC), Parts 2 and 22 for cellular equipment are applicable for the Litenna™ Model 9110. Measurements must be made to detect spurious emissions that may be radiated directly from the cabinet, control circuits, power leads, or intermediate circuit elements under normal conditions of installation and operation. The radiated emissions must be measured in accordance with FCC measurement procedure. All tests must be performed in the operational mode, in which the input RF signal is unmodulated, and Up-Link and Down-Link transmitters were loaded by 50Ohm dummy loads. This mode is considered to be the worst case in a sense of radiated emission from the equipment circuits, cabinet, power and interconnect cables. In accordance with the requirements of 47CFR Part 2, Sections 2.993 and 2.997, radiated emission of the first 10 harmonics of the carrier frequency and any other internal oscillator or any spurious radiated emission, will not exceed the radiated field strength radiated from half-wave tuned dipole fed by substitution generator. The spectrum shall be investigated from the lowest radio frequency signal generated in the equipment, without going below 9kHz, up to at least the tenth harmonic of the highest fundamental frequency or to 40GHz, whichever is lower. For measurements of the field strength of spurious radiation, an open field test is required. The measurement antenna must be loc…

Text truncated - open the document above for the full version.

FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 1 EXHIBIT 6. MEASURED DATA ON CONDUCTED AND RADIATED EMISSIONS. FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 2 a) POWER LINE CONDUCTED EMISSIONS ------ Pursuant 47 CFR 15.107. Measured data on conducted emissions per 47CFR 15.107 on AC power lines is the subject of Technical Report No.9FOX049F, attached. b) RADIATED EMISSIONS ------ Pursuant 47 CFR 15.109. Measured data on radiated emissions per 47CFR 15.109 is the subject of Technical Report No.9FOX049F, attached. FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 3 ELECTROMAGNETIC COMPATIBILITY TEST REPORT Company Name: Foxcom Wireless Ltd. Equipment Under Test: Litenna™ Model 9110 Report I.D.Number: 9FOX049F.DOC Total number of pages (including this page) : 35 Date : 25 April, 1999 EMI TEST Ltd. EMC Test Laboratory Moshav Hanniel P.O.B.65, D.N.Lev Hasharon, Israel, 42865 Phone:(972) 9-8987382 Fax:(972) 9-8987383 ____________________________________________________ This report must not be reproduced, except in full, without the written permission of EMI Test Ltd. This report relates only to the items tested. FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 4 Table of Contents: DescriptionPage 1. General Information..................................................................................................5 2. Tests Summary. .......................................................................................................6 3. Applicable Documents..............................................................................................7 4. Detailed Applicable EMC Requirements and Limits. ................................................8 5. Procedures for Measuring RF Emissions from EUT.................................................9 5.1 AC Power line Conducted Emissions Measurements. ............................................9 5.2 Radiated Emissions Measurements. .....................................................................10 6. System Test Configuration. ....................................................................................11 6.1 Product Description. ..............................................................................................11 6.2 The Tested Configuration. .....................................................................................12 6.3 Clock frequencies. .................................................................................................13 6.4 Cables Used During the Tests:..............................................................................13 6.5 Modifications Required for Compliance. ................................................................13 7. Description of the Test Site. ...................................................................................14 8. List of Test Equipment Used. .................................................................................15 9. Conducted Emission Data. .....................................................................................16 10. Radiated Emission Data. .......................................................................................16 11. Results of Conducted Emissions Tests. ................................................................17 12. Results of Radiated Emission Tests......................................................................17 13. Signatures. ............................................................................................................18 14. Setup Photographs................................................................................................19 Appendix A. Conducted Emission Data .......................................................................21 Appendix B. Radiated Emission Data ..........................................................................34 List of Photographs Photo 1. Test setup, Conducted Emission Test........19 Photo 2. Test setup, Radiated Emission Test........20 FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 5 1. General Information. Applicant: Foxcom Wireless Ltd. Applicant Address: Ofek One Center Building B, Northern Industrial Zone Lod, Israel 71293 Telephone: 972-8-9183818 FAX: 972-8-9183844 The testing was observed by the following applicant's personnel: Mr.Shlomo Cohen Date of reception for testing: March 14, 1999 Dates of testing: March 14, 1999 Test Laboratory Location: EMI TEST Ltd, Moshav Hanniel, P.O.Box 65, D.N.Lev Hasharon, Israel 42865 Equipment Under Test: Litenna™ Model 9110 Serial Numbers: TBD Mode of Operation: Up-Link and Down-Link Receiving and Transmitting modes Year of Manufacture: 1999 Applicable EMC Specification: Federal Communication Commission (FCC), Code of Federal Regulations 47, Ch. 1 (10-1-97 Edition) Part 15: Radio Frequency Devices, Sections 15.107 & 15.109, Class A FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 6 2. Tests Summary. EMI Test Laboratory has completed testing of Litenna™ Model 9110 in accordance with the requirements of the FCC Part 15 Regulations for Class A equipment. The EUT has been found to comply with the conducted and radiated emission requirements of the FCC Part 15 Regulations for Class A equipment: Section 15.107:Limits of Mains Terminal Interference Voltage (Conducted Emission) in the 0.45MHz to 30MHz frequency range. Section 15.109:Limits of Radiated Interference Field Strength in the 30MHz to 9000MHz frequency range. FCC ID: OJFLITENNA0009110 EHXIBIT 6 Page 7 3. Applicable Documents. 3.1Federal Communication Commission (FCC), Code of Federal Regulations 47, Ch.1 (10-1-97 Edition), Part 15: Radio Frequency Devices, Sections 15.107 & 15.109. 3.2FCC/OET, Laboratory Measurement Procedures MP-4, July 1987, "FCC Procedures for Measuring RF Emissions from Computing Devices". 3.3FCC/Office of Science and Technology OST-55, August 1982, "Characteristics of Open Field Test Sites". 3.4FCC/OET, "FCC Procedure for Measuring Electromagnetic Emissions from Digital Devices", TP-5, March 1989. 3.5FCC/OET, "Understanding the FCC Regulations Conce…

Text truncated - open the document above for the full version.

EMI Test Report 9FOX049S FCC ID: OJFLITENNA0009110 EHXIBIT 7 Page 1 EXHIBIT 7. MEASURED DATA ON OCCUPIED BANDWIDTH AND CONDUCTED SPURIOUS EMISSIONS. EMI Test Report 9FOX049S FCC ID: OJFLITENNA0009110 EHXIBIT 7 Page 2 a) OCCUPIED BANDWIDTH DATA ------ Pursuant 47 CFR 2.989 and 22.917(b). Measured data on occupied bandwidth per 47CFR 2.989 and 22.917(b).is the subject of Sections 7.1 and 8.1 of the following Technical Report No.9FOX049S. b) CONDUCTED SPURIOUS EMISSIONS DATA ------ Pursuant 47 CFR 2.991. Measured data on conducted spurious and harmonics emissions per 47CFR 2.991 is the subject of Sections 7.2 and 8.2 of the following Technical Report No.9FOX049S. EMI Test Report 9FOX049S FCC ID: OJFLITENNA0009110 EHXIBIT 7 Page 3 ELECTROMAGNETIC COMPATIBILITY TEST REPORT Compliance with Occupied Bandwidth and Conducted Harmonics and Spurious Emissions Requirements of 47CFR Parts 2 and 22 Company Name: Foxcom Wireless Ltd. Equipment Under Test: Litenna™ Model 9110 Report I.D.Number:9FOX049S.DOC Total number of pages (including this page): 47 Date:24 April, 1999 EMI TEST Ltd. EMC Test Laboratory Moshav Hanniel, D.N.Lev Hasharon, Israel, 42865 Phone:(972) 9-8987382 Fax:(972) 9-8987383 ____________________________________________________ This report must not be reproduced, except in full, without the written permission of EMI Test Ltd. This report relates only to the items tested. EMI Test Report 9FOX049S FCC ID: OJFLITENNA0009110 EHXIBIT 7 Page 4 Table of Content: Description Page 1. GENERAL INFORMATION.6 2. APPLICABLE DOCUMENTS.7 3. DETAILED APPLICABLE TECHNICAL REQUIREMENTS AND LIMITS.8 3.1 OCCUPIED BANDWIDTH REQUIR…

Text truncated - open the document above for the full version.