OJFMA2KPSRemote hub unit of distributed antenna system

MA 2000 Solution with 700/800 Public Safety Support Installation and Configuration Guide P/N: 709C00120x REV: A0 Date: JAN-2010 Preface MA 2000 Installation and Configuration Guide II MobileAccess 8391 Old Courthouse Road, Suite 300, Vienna, VA 22182 Tel: +1(866)436-9266, +1(703)848-0200 TAC: +1(800)787-1266, Fax: +1(703)848-0280 http://www.MobileAccess.com © COPYRIGHT 2009, MOBILEACCESS NETWORKS INC. ALL RIGHTS RESERVED. M OBILEACCESS™ IS A REGISTERED TRADEMARK OF MOBILEACCESS. THIS DOCUMENT CONTAINS OTHER TRADEMARKS, TRADE NAMES AND SERVICE MARKS OF MOBILEACCESS AND OTHER ORGANIZATIONS, ALL OF WHICH ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. T HIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF MOBILEACCESS AND MAY NOT BE COPIED, TRANSMITTED, STORED IN A RETRIEVAL SYSTEM OR REPRODUCED IN ANY FORMAT OR MEDIA , IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF MOBILEACCESS. INFORMATION CONTAINED IN THIS DOCUMENT SUPERSEDES ANY PREVIOUS MANUALS, GUIDES, SPECIFICATIONS, DATA SHEETS OR OTHER INFORMATION THAT MAY HAVE BEEN PROVIDED OR MADE AVAILABLE TO THE USER . T HIS DOCUMENT IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY, AND MOBILEACCESS DOES NOT WARRANT OR GUARANTEE THE ACCURACY, ADEQUACY , QUALITY, VALIDITY, COMPLETENESS OR SUITABILITY FOR ANY PURPOSE OF THE INFORMATION CONTAINED IN THIS DOCUMENT. MOBILEACCESS RESERVES THE RIGHT TO MAKE UPDATES, IMPROVEMENTS AND ENHANCEMENTS TO THIS DOCUMENT AND THE PRODUCTS TO WHICH IT RELATES AT ANY TIME WITHOUT PRIOR NOTICE TO THE USER . MOBILEACCESS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN. Preface MA 2000 Installation and Configuration Guide III Policy for Warrantee and Repair MOBILEACCESS TESTS AND INSPECTS ALL ITS PRODUCTS TO VERIFY THEIR QUALITY AND RELIABILITY. MOBILEACCESS USES EVERY REASONABLE PRECAUTION TO ENSURE THAT EACH UNIT MEETS THEIR DECLARED SPECIFICATIONS BEFORE SHIPMENT . CUSTOMERS SHOULD ADVISE THEIR INCOMING INSPECTION , ASSEMBLY, AND TEST PERSONNEL ABOUT THE PRECAUTIONS REQUIRED IN HANDLING AND TESTING OUR PRODUCTS. MANY OF THESE PRECAUTIONS CAN BE FOUND IN THIS MANUAL . T HE PRODUCTS ARE COVERED BY THE FOLLOWING WARRANTIES: General Warranty MOBILEACCESS WARRANTS TO THE ORIGINAL PURCHASER ALL STANDARD PRODUCTS SOLD BY MOBILEACCESS TO BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP FOR ONE (1) YEAR FROM DATE OF SHIPMENT FROM MOBILEACCESS. DURING THE WARRANTY PERIOD, MOBILEACCESS WILL REPAIR OR REPLACE ANY PRODUCT THAT MOBILEACCESS PROVES TO BE DEFECTIVE. THIS WARRANTY DOES NOT APPLY TO ANY PRODUCT THAT HAS BEEN SUBJECT TO ALTERATION , ABUSE, IMPROPER INSTALLATION OR APPLICATION, ACCIDENT, ELECTRICAL OR ENVIRONMENTAL OVER -STRESS, NEGLIGENCE IN USE, STORAGE, TRANSPORTATION OR HANDLING. Specific Product Warranty Instructions ALL MOBILEACCESS PRODUCTS ARE WARRANTED AGAINST DEFECTS IN WORKMANSHIP, MATERIALS AND CONSTRUCTION, AND TO NO FURTHER EXTENT . ANY CLAIM FOR REPAIR OR REPLACEMENT OF UNITS FOUND TO BE DEFECTIVE ON INCOMING INSPECTION BY A CUSTOMER MUST BE MADE WITHIN 30 DAYS OF RECEIPT OF SHIPMENT, OR WITHIN 30 DAYS OF DISCOVERY OF A DEFECT WITHIN THE WARRANTY PERIOD. THIS WARRANTY IS THE ONLY WARRANTY MADE BY MOBILEACCESS AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MOBILEACCESS SALES AGENTS OR REPRESENTATIVES ARE NOT AUTHORIZED TO MAKE COMMITMENTS ON WARRANTY RETURNS. Returns IN THE EVENT THAT IT IS NECESSARY TO RETURN ANY PRODUCT AGAINST ABOVE WARRANTY, THE FOLLOWING PROCEDURE SHALL BE FOLLOWED: 1. RETURN AUTHORIZATION IS TO BE RECEIVED FROM MOBILEACCESS PRIOR TO RETURNING ANY UNIT. ADVISE MOBILEACCESS OF THE MODEL, SERIAL NUMBER , AND DISCREPANCY. THE UNIT MAY THEN BE FORWARDED TO MOBILEACCESS, TRANSPORTATION PREPAID. DEVICES RETURNED COLLECT OR WITHOUT AUTHORIZATION MAY NOT BE ACCEPTED . 2. PRIOR TO REPAIR, MOBILEACCESS WILL ADVISE THE CUSTOMER OF OUR TEST RESULTS AND ANY CHARGES FOR REPAIRING CUSTOMER-CAUSED PROBLEMS OR OUT -OF-WARRANTY CONDITIONS ETC. 3. REPAIRED PRODUCTS ARE WARRANTED FOR THE BALANCE OF THE ORIGINAL WARRANTY PERIOD, OR AT LEAST 90 DAYS FROM DATE OF SHIPMENT . Limitations of Liabilities MOBILEACCESS'S LIABILITY ON ANY CLAIM, OF ANY KIND, INCLUDING NEGLIGENCE FOR ANY LOSS OR DAMAGE ARISING FROM, CONNECTED WITH, OR RESULTING FROM THE PURCHASE ORDER , CONTRACT, QUOTATION, OR FROM THE PERFORMANCE OR BREACH THEREOF, OR FROM THE DESIGN, MANUFACTURE , SALE, DELIVERY, INSTALLATION, INSPECTION, OPERATION OR USE OF ANY EQUIPMENT COVERED BY OR FURNISHED UNDER THIS CONTACT , SHALL IN NO CASE EXCEED THE PURCHASE PRICE OF THE DEVICE WHICH GIVES RISE TO THE CLAIM. EXCEPT AS EXPRESSLY PROVIDED HEREIN, MOBILEACCESS MAKES NO WARRANTY, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY GOODS, PARTS AND SERVICES PROVIDED IN CONNECTION WITH THIS AGREEMENT INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MOBILEACCESS SHALL NOT BE LIABLE FOR ANY OTHER DAMAGE INCLUDING, BUT NOT LIMITED TO, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH FURNISHING OF GOODS, PARTS AND SERVICE HEREUNDER, OR THE PERFORMANCE, USE OF, OR INABILITY TO USE THE GOODS, PARTS AND SERVICE. Preface MA 2000 Installation and Configuration Guide IV Reporting Defects THE UNITS WERE INSPECTED BEFORE SHIPMENT AND FOUND TO BE FREE OF MECHANICAL AND ELECTRICAL DEFECTS. E XAMINE THE UNITS FOR ANY DAMAGE THAT MAY HAVE BEEN CAUSED IN TRANSIT. IF DAMAGE IS DISCOVERED, FILE A CLAIM WITH THE FREIGHT CARRIER IMMEDIATELY . NOTIFY MOBILEACCESS AS SOON AS POSSIBLE. NOTE: KEEP ALL PACKING MATERIAL UNTIL YOU HAVE COMPLETED THE INSPECTION WARNING: TO COMPLY WITH FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, ANTENNAS USED FOR THIS PRODUCT MUST BE FIXED MOUNTED ON INDOOR PERMANENT STRUCTURES, PROVIDING A SEPARATION DISTANCE OF AT LEAST 20 CM FROM ALL PERSONS DURING NORMAL OPERATION. WARNING: ANTENNA GAIN SH…

Text truncated - open the document above for the full version.

8391 Old Courthouse Road, Suite 300 Vienna, VA 22182 The final amplification cascade of EUT (FCCID: OJFMA2KPS) consists of 4 (four) amplifiers connected in parallel. Voltage: 5 Vdc Current : 640 mA in total (160mA per each amplifier). Thank you, Steve Blum Product Manager MobileAccess Networks Inc. Office 541 758-2880 Mobile 541 990-3470

8391 Old Courthouse Road, Suite 300 Vienna, VA 22182 January 13, 2010 Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Application for certification of a remote hub unit of distributed antenna system operating in 700/800 MHz bands, FCC ID:OJFMA2KPS Dear Sir, Please find attached our application for certification of a remote hub unit of distributed antenna system, model name 700/800 Public Safety Remote Hub Unit, FCC ID:OJFMA2KPS, prepared in accordance with FCC Rules, parts 2 and 90. The product testing and this application for certification were performed by Hermon Laboratories, which is listed by FCC (Registration Numbers 90623, 90624). Hermon Labs responsible person is Mr. Michael Nikishin, tel: 011 972 4626 8440, fax:011 972 4628 8277, e-mail: [email protected]. We hope this application satisfies your requirements. Please send an invoice to Hermon Labs. Sincerely, Steve Blum .......................... Product Manager

8391 Old Courthouse Road, Suite 300 Vienna, VA 22182 Declaration of Authorization We Name: MobileAccess Networks Address: 8391 Old Courthouse Rd, Suite 300 City: Vienna, VA 22182-3819 Country: USA............................................................................ Declare that: Name Representative of agent: ............. (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 30500 Country Israel is authorized to apply for Certification of the following product(s): Product description: Distributed Antenna System Type designation: RF booster Trademark EnCover 2000 on our behalf. Date: 20 th of December, 2009 Name: Steve Blum .......................... (2) Function: Product Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

8391 Old Courthouse Road, Suite 300 Vienna, VA 22182 To: Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: OJFMA2KPS Reference number: 20278 Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b), MobileAccess Networks hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID:OJFMA2KPS Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up procedure Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. MobileAccess Networks understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. January 26 th , 2010 Vienna, VA, USA Steve Blum

MobileAccess Networks FCC ID:OJFMA2KPS Page 1 of 5 EXTERNAL PHOTOGRAPHS This document contains 4 photographs MobileAccess Networks FCC ID:OJFMA2KPS Page 2 of 5 Photograph No.1 Remote Hub Unit general view MobileAccess Networks FCC ID:OJFMA2KPS Page 3 of 5 Photograph No.2 Remote Hub Unit front panel view MobileAccess Networks FCC ID:OJFMA2KPS Page 4 of 5 Photograph No.3 Remote Hub Unit rear side view MobileAccess Networks FCC ID:OJFMA2KPS Page 5 of 5 Photograph No.4 Remote Hub Unit bottom panel view

MobileAccess Networks FCC ID:OJFMA2KPS Page 1 of 2 LABEL The label is affixed on the side panel of RHU as shown below. The label material is PVC with a permanent adhesive. RHU side panel, label with FCC ID:OJFMA2KPS location This device complies with part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference. BOOSTERFCC ID:OJFMA2KPS Manufacturer: MobileAccess Inc.

MobileAccess Networks FCC ID:OJFMA2KPS Page 1 of 8 INTERNAL PHOTOGRAPHS This document contains 7 photographs MobileAccess Networks FCC ID:OJFMA2KPS Page 2 of 8 Photograph No.1 Remote Hub Unit internal view with bottom panel removed MobileAccess Networks FCC ID:OJFMA2KPS Page 3 of 8 Photograph No.2 Remote Hub Unit internal view MobileAccess Networks FCC ID:OJFMA2KPS Page 4 of 8 Photograph No.3 Remote Hub Unit internal view MobileAccess Networks FCC ID:OJFMA2KPS Page 5 of 8 Photograph No.4 Remote Hub Unit internal view without shields MobileAccess Networks FCC ID:OJFMA2KPS Page 6 of 8 Photograph No.5 Remote Hub Unit PCB front view MobileAccess Networks FCC ID:OJFMA2KPS Page 7 of 8 Photograph No.6 PCB close view MobileAccess Networks FCC ID:OJFMA2KPS Page 8 of 8 Photograph No.7 Remote Hub Unit PCB second side view

MobileAccess Networks FCC ID:OJFMA2KPS Page 1 of 1 Environmental evaluation and exposure limit according to FCC CFR 47 part 1, §1.1307, §1.1310; part 2, §2.1091 The transceiver is classified as mobile. Limit for power density for general population/uncontrolled exposure is f/1500 mW/cm 2 for 300 – 1500 MHz frequency range P = 763/1500 = 0.509 mW/cm 2 P = 851/1500 = 0.567 mW/cm 2 The transmitter maximum output power in low band is 37.8 mW, in high band – 38.4 mW, total 76.2 mW (18.8 dBm). The maximum antenna gain is 10 dBi (7.85 dBd). Maximum composite ERP is 18.8 dBm + 7.85 dBd = 26.65 dBm = 0.462 W (<1.5 W). Maximum composite EIRP is 18.8 dBm + 10 dBi = 28.8 dBm = 759 mW. The power density P (mW/cm 2 ) = P T / 4π r 2 , where P T is the maximum equivalent isotropically radiated power (EIRP). The power density P at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: P = 759 mW / 4π ππ π (20 cm) 2 = 0.15 mW/cm 2 < 0.509 mW/cm 2 General public cannot be exposed to dangerous RF level.

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 86 Report ID: MOBRAD_FCC.20278_rev1.doc Date of Issue: 12/28/2009 Electrical 839.01 TEST REPORT ACCORDING TO: FCC CFR 47 Part 90 subparts R&S FOR: MobileAccess Networks Distributed antenna system Model: 700/800 Public Safety Remote Hub Unit This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: MOBRAD_FCC.20278_rev1.doc Date of Issue: 12/28/2009 Page 2 of 86 Table of contents 1 Applicant information..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details.................................................................................................................................................................... 3 5 Tests summary.............................................................................................................................................................. 4 6 EUT description............................................................................................................................................................. 5 6.1 General information....................................................................................................................................................... 5 6.2 Ports and lines .............................................................................................................................................................. 5 6.3 Support and test equipment .......................................................................................................................................... 5 6.4 Operating frequencies ................................................................................................................................................... 5 6.5 Changes made in the EUT ............................................................................................................................................ 5 6.6 Test configuration.......................................................................................................................................................... 6 6.7 Transmitter characteristics ............................................................................................................................................ 7 7 Transmitter tests according to 47CFR part 90 requirements......................................................................................... 8 7.1 Peak output power test.................................................................................................................................................. 8 7.2 Occupied bandwidth test ............................................................................................................................................. 10 7.3 Emission mask test ..................................................................................................................................................... 18 7.4 Adjacent channel power (ACP) test ............................................................................................................................ 24 7.5 Radiated spurious emission measurements................................................................................................................ 39 7.6 Spurious emissions at RF antenna connector test ...................................................................................................... 48 7.7 Intermodulation ........................................................................................................................................................... 69 8 APPENDIX A Test equipment and ancillaries used for tests....................................................................................... 73 9 APPENDIX B Measurement uncertainties................................................................................................................... 74 10 APPENDIX C Test laboratory description ................................................................................................................... 75 11 APPENDIX D Specification references ....................................................................................................................... 75 12 APPENDIX E Test equipment correction factors......................................................................................................... 76 13 APPENDIX F Abbreviations and acronyms................................................................................................................. 86 Report ID: MOBRAD_FCC.20278_rev1.doc Date of Issue: 12/28/2009 Page 3 of 86 1 Applicant information Client name: MobileAccess Networks Inc. Address: 8391 Old Courthouse Rd., suite 300, Vienna, Virginia 22182, USA Telephone: 001 703 848 0200 Fax: 001 703 848 0280 E-mail: [email protected] Contact name: Mr. Steve Blum 2 Equipment under test attributes Product name: Distributed Antenna System Product type: Booster Model(s): 700/800 Public Safety Remote Hub Unit (RHU) RHU Serial number: 094215C RHU Hardware version: 01 BU Serial number: 0936046 with a module WB-B4U BU Ha…

Text truncated - open the document above for the full version.

MobileAccess Networks FCC ID:OJFMA2KPS Page 1 of 10 SETUP PHOTOGRAPHS This document contains 9 photographs MobileAccess Networks FCC ID:OJFMA2KPS Page 2 of 10 Photograph No.1 Peak output power measurement setup MobileAccess Networks FCC ID:OJFMA2KPS Page 3 of 10 Photograph No.2 Occupied bandwidth measurement setup MobileAccess Networks FCC ID:OJFMA2KPS Page 4 of 10 Photograph No.3 Emission mask, ACP measurement setup MobileAccess Networks FCC ID:OJFMA2KPS Page 5 of 10 Photograph No.4 Conducted spurious emissions measurement setup MobileAccess Networks FCC ID:OJFMA2KPS Page 6 of 10 Photograph No.5 Intermodulation measurement setup MobileAccess Networks FCC ID:OJFMA2KPS Page 7 of 10 Photograph No.6 Spurious emissions measurement setup in the anechoic chamber below 30 MHz MobileAccess Networks FCC ID:OJFMA2KPS Page 8 of 10 Photograph No.7 Spurious emissions measurement setup in the anechoic chamber in 30 -1000 MHz MobileAccess Networks FCC ID:OJFMA2KPS Page 9 of 10 Photograph No.8 Spurious emissions measurement setup in the anechoic chamber above 1000 MHz MobileAccess Networks FCC ID:OJFMA2KPS Page 10 of 10 Photograph No.9 Spurious emissions measurement setup in the anechoic chamber, EUT close view