OSZ37704M5 GHz IEEE 802.11a WLAN MiniPCI card

Preliminary OEM installation manual FCC ID: OSZ37704M Page 1 of 11 Intersil ISL37704M Indigo MiniPCI 5GHz WLAN Card OEM installation Manual Version 0.1 Preliminary OEM installation manual FCC ID: OSZ37704M Page 2 of 11 Table of Contents 0-INTRODUCTION .................................................................................................... 3 1-OEM INSTALLATION PROCEDURE ................................................................ 3 1.1 H OST PC NOTEBOOK.......................................................................................... 3 1.2 INSTALLING THE MINIPCI CARD INTO THE HOST PC NOTEBOOK.................... 3 1.3 INSTALLING THE SOFTWARE DRIVERS................................................................ 3 1.4 W IRELESS LAN INSTALLATION GUIDE LINES AND AUTHORIZATION FOR USE.7 1.5 IEEE 802.11 FREQUENCY ASSIGNMENTS........................................................... 8 2-REGULATORY INFORMATION ........................................................................ 9 2.1 FCC I NFORMATION TO USER............................................................................. 9 2.2 AGENCY AND REGULATORY BODY APPROVALS................................................ 9 2.3 USA-FCC (F EDERAL COMMUNICATIONS COMMISSION) STATEMENT............ 9 2.4 FCC I NTERFERENCE STATEMENT..................................................................... 9 2.5 EXPORT RESTRICTIONS:................................................................................... 10 2.6 FCC GUIDELINES FOR HUMAN EXPOSURE...................................................... 10 2.7 EUROPE - EU R&TTE DECLARATION OF CONFORMITY............................... 10 3-TECHNICAL SPECIFICATIONS....................................................................... 11 Preliminary OEM installation manual FCC ID: OSZ37704M Page 3 of 11 0-Introduction The Intersil ISL37704M WLAN MiniPCI Card is a complete wireless high speed Network Interface Card (NIC) utilizing the Intersil PRISM® 5 chip set. It provides a complete PRISM 5 reference design evaluation platform of hardware and software to system providers or integrators requiring wireless data communications capability and is ideal for integration into computer platforms. It supports the IEEE 802.11a specification, providing data rates of 54, 48, 36, 24, 18, 12, 9, and 6 Mbps. Access Points are available from a number of suppliers, enabling a total wireless network solution. • FCC Certified Under Part 15 to Operate in 5GHz ISM Band • Support for 54, 48, 36, 24, 18, 12, 9, and 6 Megabit Per Second (Mbps) Data Rates • Supports the lEEE 802.11a Specification • Driver Supports Microsoft® Windows® 98/SE, ME, XP, 2000 (SR1) • Supports Dual Diversity Antennas • Provides Wireless Data Communications to support live video applications • Intelligent Power Control, Including 802.11 Power Save Mode 1-OEM Installation procedure 1.1 Host PC Notebook The Intersil ISL37704M WLAN MiniPCI Card is authorized to be installed into the following host PC notebooks: 1—IBM Thinkpad type 2652 series 1.2 Installing the miniPCI card into the host PC Notebook a-open miniPCI slot cover of host PC Notebook housing (take the necessary ESD precautions). b-insert miniPCI card into miniPCI slot c-connect the host PC notebook antennas to the miniPCI card antenna connectors (Hirose type UFL connector) d-close miniPCI slot cover of host PC Notebook housing 1.3 Installing the software drivers a-Start windows b-When windows detects new hardware and asks for drivers, point to directory where the Intersil device driver is located (for example floppy drive, cdrom , harddisk) to install. c-after drivers are installed, restart windows. Preliminary OEM installation manual FCC ID: OSZ37704M Page 4 of 11 d-the Intersil WLAN icon will appear in system tray on the bottom right of the screen (see yellow arrow in fig. 01) fig, 01: Intersil WLAN icon e-double click the Intersil WLAN icon to open the WLAN settings, the following window will appear (see fig.02) fig, 02: Intersil WLAN settings window Preliminary OEM installation manual FCC ID: OSZ37704M Page 5 of 11 f-click on configuration tab and select which type of network is required (access point or Peer-to-peer mode), see fig. 03. fig, 03: WLAN network type setting window g-select what TX rate is required (default setting is fully automatic) see fig. 04. fig, 04: WLAN tx rate setting window Preliminary OEM installation manual FCC ID: OSZ37704M Page 6 of 11 h-select what encryption type is required, 64 or 128 bit WEP (default setting is disabled) see fig. 05. fig, 05: WLAN encryption rate setting window i-click on the status tab to see the connection status (fig.06). fig, 06: WLAN network status Preliminary OEM installation manual FCC ID: OSZ37704M Page 7 of 11 j-click on the about tab to see the software drivers versions and MAC address (fig.07). fig, 07: WLAN driver and MAC addres information 1.4 Wireless LAN installation guide lines and Authorization for use Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by Intersil may void the user’s authority to operate the equipment. Intersil is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Intersil and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. The use of Wireless LAN devices may be restricted in some situations or environments for example: * On board of airplanes, or * In an explosive environment, or * In case …

Text truncated - open the document above for the full version.

TNO Electronic Products & Services (EPS) B.V. Nederlandse Organisatie voor toegepast-natuurwetenschappelijk onderzoek / Netherlands Organisation for Applied Scientific Research Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.tno.nl T +31 594 505005 F +31 594 504804 E [email protected] Subject Cover letter Date February 26, 2003 Our reference 03K0201a Your reference - Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands Office of Engineering and Technology Laboratory Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 U.S.A. Dear Mr./Ms., On behalf of our customer Intersil Corporation, we hereby would like to apply for FCC certification of the following device: FCC ID : OSZ37704M Brand : Intersil Model number : ISL37704M Description : 5 GHz IEEE 802.11a WLAN MiniPCI card The usage of this transmitter will be limited to the following specific host (notebook PC): brand: IBM, model: 2652 (Thinkpad A30 series). This specific host contains a built-in antenna of brand Skycross, model 222-0908. The following PDF files (exhibits) are electronically submitted: 1. Cover letter containing the request for FCC certification 2. Request for confidentiality 3. Test report in conformity with 47 CFR Part 15 4. Bill of materials 5. Circuit diagram 6. Block diagram 7. Operational description 8. Interior photographs 9. Exterior photographs 10. Antenna information of PC host 11. Test setup photographs 12-15. SAR test report and calibration data (4 parts) 16. Authorization letter 17. OEM installation manual 18. Label information Best regards, TNO Electronic Products & Services (EPS) B.V. P.A.J.M. Robben, B.Sc.E.E. Marketing Manager

TNO Electronic Products & Services (EPS) B.V. Nederlandse Organisatie voor toegepast-natuurwetenschappelijk onderzoek / Netherlands Organisation for Applied Scientific Research Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.tno.nl T +31 594 505005 F +31 594 504804 E [email protected] Subject Request for confidentiality Date February 26, 2003 Our reference 03K0201b Your reference - Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands Office of Engineering and Technology Laboratory Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 U.S.A. Dear Mr./Ms., Pursuant to section 0.457 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID: OSZ37704M, to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than Intersil Corporation and TNO Electronic Products & Services (EPS) B.V.: 1. Bill of materials 2. Circuit diagram 3. Operational description 4. Block diagram The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, TNO Electronic Products & Services (EPS) B.V. P.A.J.M. Robben, B.Sc.E.E. Marketing Manager

www.intersil.com ING Bank: 65.02.63.049 Swift code: INGBNL2A VAT / BRW: NL8039.66.659.B.01 Chamber of Commerce Utrecht: 30139807 Date 11 February 2003 Your reference -- Our reference 2003-mansup-536c Subject Agent authorization letter for FCC ID: OSZ37704M To whom it may concern To whom it may concern, This letter confirms the agreement that; TNO Electronic Products & Services (EPS) B.V. Smidshornerweg 18 9822 TL Niekerk The Netherlands is authorized as an agent for Company Intersil Corp. The Netherlands Address, City Rembrandtlaan 1a, Bilthoven Country The Netherlands Phone number +31 30 2296060 Fax number +31 30 2296061 and is authorized to sign application forms and act on behalf of Intersil Corp. The Netherlands and is authorized to receive and exchange data between Intersil Corp. The Netherlands and European/non-European national authorities regarding the -certification of- and/or -arranging type approvals for the following product: Intersil model ISL37704M WLAN miniPCI Card with FCC ID: OSZ37704M This authorization will expire on September 1, 2003 or upon earlier written notice from Intersil Corp. The Netherlands. Yours sincerely, Derick Sariredjo ( [email protected] ) Intersil Corp. The Netherlands ( www.intersil.com ) Rembrandtlaan 1a, 3723 BG Bilthoven, The Netherlands Phone: +31.30.225.9742 Fax: +31.30.229.6061

FCC ID: OSZ37704M Page 1 of 4 Photographs of Description: IEEE802.11a 5 GHz WLAN miniPCI Card FCC ID: OSZ37704M Brand name: Intersil Model number: ISL37704M FCC ID: OSZ37704M Page 2 of 4 ISL37704M PCB front with shield FCC ID: OSZ37704M Page 3 of 4 ISL37704M PCB front without shield FCC ID: OSZ37704M Page 4 of 4 ISL37704M PCB rear

FCC ID: OSZ37704M Page 1 of 4 Photographs of Description: IEEE802.11a 5 GHz WLAN miniPCI Card FCC ID: OSZ37704M Brand name: Intersil Model number: ISL37704M FCC ID: OSZ37704M Page 2 of 4 ISL37704M PCB front with shield FCC ID: OSZ37704M Page 3 of 4 ISL37704M PCB front without shield FCC ID: OSZ37704M Page 4 of 4 ISL37704M PCB rear

FCC ID: OSZ37704M Page 1 of 6 Photographs of IBM notebook PC with embedded WLAN antennas for Description: 5 GHz WLAN MiniPCI Card FCC ID: OSZ37704M Brand name: Intersil Model number: ISL37704M Notebook Host: IBM Thinkpad 2652 Notebook PC series Embedded 5 GHz antennas: Skycross model 222-0908 FCC ID: OSZ37704M Page 2 of 6 5GHz WLAN antenna locations of IBM Host PC for ISL37704M MiniPCI card 5GHz WLAN RX antenna 5GHz WLAN TX/ RX antenna FCC ID: OSZ37704M Page 3 of 6 Overview of ISL37704M MiniPCI card mounted in bottom of IBM host PC FCC ID: OSZ37704M Page 4 of 6 5 GHz antenna locations (IBM host PC with keyboard assembly removed) 5GHz WLAN RX antenna 5GHz WLAN TX/RX antenna FCC ID: OSZ37704M Page 5 of 6 Overview of 5 GHz antenna assembly FCC ID: OSZ37704M Page 6 of 6 Skycross 5GHz antenna mounted on left lower corner of PC housing Skycross 5GHz antenna mounted on right lower corner of PC housing

PRISM INDIGO TM Model No.: ISL37704M Tested For Intersil Corporation Rembrandtlaan 1a 3723 BG Bilthoven P.O. Box 343 3720 AH Bilthoven The Netherlands In Accordance With SAR (Specific Absorption Rate) Requirements using guidelines established in IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) UltraTech's File No.: ITS-004-SAR This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: January 21, 2003 Report Prepared by: JaeWook Choi Tested by: JaeWook Choi Issued Date: January 21, 2003 Test Dates: January 09, 2003 The results in this Test Report apply only to the sample(s) tested, which has been randomly selected. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Telephone (905) 829-1570 Facsimile (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] SPECIFIC ABSORPTION RATIO (SAR) Page 1 IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) PRISM INDIGO TM (ISL37704M) FCC ID: OSZ37704M TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION................................................................................................................................................ 4 1.1. SCOPE............................................................................................................................................................................... 4 1.2. REFERENCES................................................................................................................................................................... 4 EXHIBIT 2. PERFORMANCE ASSESSMENT..................................................................................................................... 5 2.1. CLIENT AND MANUFACTURER INFORMATION...................................................................................................... 5 2.2. DEVICE UNDER TEST (D.U.T.) DESCRIPTION............................................................................................................. 5 2.3. LIST OF D.U.T.’S ACCESSORIES:................................................................................................................................. 6 2.4. SPECIAL CHANGES ON THE D.U.T.’S HARDWARE/SOFTWARE FOR TESTING PURPOSES............................. 6 2.5. ANCILLARY EQUIPMENT............................................................................................................................................. 6 2.6. GENERAL TEST CONFIGURATIONS........................................................................................................................... 6 2.6.1. Equipment Configuration........................................................................................................................................... 6 2.6.2. Exercising Equipment................................................................................................................................................ 6 2.7. SPECIFIC OPERATING CONDITIONS...................................................................................................................................... 6 2.8. BLOCK DIAGRAM OF TEST SETUP............................................................................................................................. 7 EXHIBIT 3. SUMMARY OF TEST RESULTS...................................................................................................................... 8 3.1. LOCATION OF TESTS..................................................................................................................................................... 8 3.2. APPLICABILITY & SUMMARY OF SAR RESULTS.................................................................................................... 8 EXHIBIT 4. MEASUREMENTS, EXAMINATIONS & TEST DATA................................................................................ 9 4.1. TEST SETUP..................................................................................................................................................................... 9 4.2. PHOTOGRAPH OF D.U.T. AND ALL ACCESORIES................................................................................................................ 10 4.3. PHOTOGRAPHS OF D.U.T. POSITION........................................................................................................................14 4.3.1. Body-Worn Configuration........................................................................................................................................ 14 4.3.1.1. Lap-top position (minimum distance to the antenna).............................................................................................................. 14 4.4. MAXIMUM PEAK SPATIAL-AVERAGE SAR........................................................................................................................ 16 4.4.1. Maximum Peak Spatial-average SAR Data.............................................................................................................. 16 4.4.2. Maximum Peak Spatial-Average SAR LOCATION.................................................................................................. 16 4.5. SAR MEASUREMENT DATA.............................................................................................................................................. 17 4.5.1. Body-Worn Configuration Result............................................................................................................................. 17 4.5.1.1. Lap-top position...............................................................................................................................…

Text truncated - open the document above for the full version.

SPECIFIC ABSORPTION RATIO (SAR) Page 30 IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) PRISM INDIGO TM (ISL37704M) FCC ID: OSZ37704M 5.6.3.2. Determination of Conversion Factor (γ) in the simulated tissue The sensitivity of the probe in the dielectric media compared to its sensitivity in the air, is different. Convers (γ) is defined to determine the degree of the enhanceme ion Factor nt of sensitivity in the different dielectric media and relate it to its sensitivity in the air. γ×≡ airtottissuetot POPO __ Thus, γη 1 _ 2 ×= tissuetot tissue PO E ,and 2E |E tissue | 2 RMS E-fiel PO tot_tissue Probe volta d level [(V/m) 2 ] induced within the exposed tissue easured in the simulated tissue [mV] ρ γη σ 1 2 _ ×× = E tissuetot tissue PO SAR where, ge output m PO tot_air Probe voltage output measured in the air (Z air = 377[Ω]) [mV] η E2 Sensor Factor to the |E| 2 , an arbitrary value 10.8/3,770 [mV/(V/m) 2 ] the dielectric media The contor (γ) c. It is the quotient of SAR t , the SAR determined output oltage o ained the sam γ Conversion factor; ratio of sensor response in air to response in vecan be used to scale the E-field in terms of the thermally-derived SARrsion fa from temperature measurements in the flat phantom, and PO tot_tissue , the E-field prove btate location in the phantom v = tissuet SARSAR ρ γη σ ρ 1 2 _ @ ×× = ∆ E tissuetot cal PO t SAR PO cal tissuetot cal × =× × = @ _ @ _ 2 8.10 770,3 ρ σ ρη σ γ (Eq. 3) σ 2 @ × = ∆⋅ tissuecal E Tc Thus, tT PO c tissuetot tE ∆∆ × ×× ULTRATECH GROUP OF LABS File #: ITS-004-SAR 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 January 21, 2003 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected], Website: http://www.ultratech-labs.com • Assessed by ITI (UK) Competent Body, NVLAP (USA) Accreditation Body & ACA/AUSTEL (Australia), VCCI (Japan) • Accredited by Industry Canada (Canada) under ACC-LAB (Europe/Canada MRA and APEC/Canada MRA) • Recognized/Listed by FCC (USA ) • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) SPECIFIC ABSORPTION RATIO (SAR) Page 31 IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) PRISM INDIGO TM (ISL37704M) FCC ID: OSZ37704M where, γ Conversion factor; ratio of sensor response in SAR Thermally-derived SAR [W/Kg] (Eq. 1) air to response in the dielectric media t |E tissue | 2 RMS E-field level [(V/m) 2 ] induced within the exposed tissue PO tot_tissue Probe voltage output measured in the simulated tissue [mV] η E2 Sensor Factor to the |E| 2 , an intermediately constant, 10.8/3,770 [mV/(V/m) 2 ] o g the calibration procedure [S/m] ∆ace [ o C /sec] The temature E-field coor an example in which the thermal quantities were, power input = .0 63 [ o C] 0 [J/Kg/ o C] The resu1) c Specific heat capacity of the simulated tissue [J/Kg/C] σ @cal Conductivity of the simulated tissue durin ρ Actual mass density of the simulated tissue [Kg/m 3 ] ∆T/ t Initial rate of tissue heating, before thermal diffusion takes pl perrrelation is illustrated below (for simulated brain tissue) f RF 0.5 [W] ∆T = 0 1 (from thermistor-base temperature probe) σ @cal = 0.97 [S/m] ρ = 1,200 [Kg/m 3 ] c = 2,70 ∆t = 30 [sec] lting SAR was (Eq. t SAR t = 30 = 1.467 [W/Kg] In this case the outd probe when at the same position as the thermistor probe was tot_tissue he calculation of conversion factor (γ) from (Eq. 3) follows: γ = 0163.0700,2× put of the E-fiel = 28.5 [mV] PO T 467.1 770,3 10 × = 5.482 5.6.4. 5.6.4.1. E-Field The probe cal before starting measurements. Instrumentation amplifier batteries must be charged. This can be monitored by observing DC offset voltages. A daily log of the DC offset voltages should be kept for this purpose. 5.2897.0 200,1 8. × Data Acquisition Methodology Measurement ibration must be current ULTRATECH GROUP OF LABS File #: ITS-004-SAR 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 January 21, 2003 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected], Website: http://www.ultratech-labs.com • Assessed by ITI (UK) Competent Body, NVLAP (USA) Accreditation Body & ACA/AUSTEL (Australia), VCCI (Japan) • Accredited by Industry Canada (Canada) under ACC-LAB (Europe/Canada MRA and APEC/Canada MRA) • Recognized/Listed by FCC (USA ) • All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) SPECIFIC ABSORPTION RATIO (SAR) Page 32 IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) PRISM INDIGO TM (ISL37704M) FCC ID: OSZ37704M Measurements in the phantom are automatically calculated for each location by summation of the three dipole outputs. Because each dipole produces an output voltage proportional to the square of the electric field component along the represents the RMS values for the total electric field. Thus, taking into consideration the amplifier settings and the DC offset voltages, the total electric field strength at a measurement location is as follows. re At each measurement point, the program records the output of the three channels: dipole, the sum of dipole voltages See Appendix C. PO tot is labeled by the software as measure of values (voltages). The SAR for calculations that a derived from the measure of values are discussed below. () 2 2 11111E EASDCVPOη×≡×−= () 2 2 22222E EASDCVPOη×≡×−= 2 () 233333E EASDCVPOη×≡×−= 321 212 POPOPO EEEEPO Etot ++≡ ++=×≡ η () 2 2 32 2 22 2 12 2 3 222 EEE EEEE ×+×+×=× ηηηη Where, easurement point C Ambient DC offset of channel i at a measurement point tot 5.6.4.2. S…

Text truncated - open the document above for the full version.

January 21, 2003 File No.: ITS-004-SAR Intersil Corporation Rembrandtlaan 1a 3723 BG Bilthoven P.O. Box 343 3720 AH Bilthoven The Netherlands NOT TRANSFERABLE This Verification Certificate is hereby issued to the named GRANTEE and is VALID ONLY for the equipment identified hereon for use under the rules and regulations listed below: GRANTEE'S NAME: Intersil Corporation PRODUCT UNDER TEST: PRISM INDIGO TM MODEL NO.: ISL37704M FCC ID: OSZ37704M OPERATING FREQUENCY RANGE: 5180 ~ 5320 MHz RATED RF OUTPUT POWER: 18.75 dBm conducted EXPOSURE CATEGORY: General Population/Uncontrolled MAX. PEAK SPATIAL-AVERAGE SAR 1g : 0.009 W/Kg APPLICABLE STANDARDS: SAR (Specific Absorption Rate) requirements using guidelines established in IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102(Issue 1) and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) Approved by: Tri M. Luu, P.Eng. V.P. – Engineering UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected], Email: [email protected] 2 31040/SIT C-1376 46390-2049 200093-0 00-034

UltraTech Group of Labs January 21, 2003 Intersil Corporation Rembrandtlaan 1a 3723 BG Bilthoven P.O. Box 343 3720 AH Bilthoven The Netherlands Attn.: Derick Sariredjo Subject: Verification Testing in accordance with SAR (Specific Absorption Rate) requirements using guidelines established in: IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C) Industry Canada RSS-102 (Issue 1) ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1) Product: PRISM INDIGO TM Model: ISL37704M Dear Mr. Sariredjo The product sample has been tested in accordance with SAR (Specific Absorption Rate) requirements using guidelines established in IEEE C95.1-1991, FCC OET Bulletin 65 (Supplement C), Industry Canada RSS-102 (Issue 1)and ACA Radiocommunications (Electromagnetic Radiation – Human Exposure) Amendment Standard 2000 (No. 1), and the results and observation were recorded in the engineering report, Our File No.: ITS-004-SAR Enclosed you will find a copy of the engineering report. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering Encl. 31040/SIT A96/TH/0093 46390-2049 200093-0 2 00-034 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Telephone (905) 829-1570 Facsimile (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Testing and certification of, consultancy and research concerning, electronic and electric appliances, systems, installations and telecommunication systems TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Project number: 02111802.r01 Page 1 of 96 TEST REPORT OF A 5 GHZ IEEE 802.11a WLAN MINIPCI CARD, BRAND INTERSIL, MODEL ISL37704M, IN CONFORMITY WITH 47 CFR PART 15 (2002-08-23). FCC listed Industry Canada VCCI registered : : : 90828 IC3501 R-1518, C-1598 Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2002-08-23) 5 GHz IEEE 802.11a WLAN MiniPCI card Intersil Corporation Intersil ISL37704M OSZ37704M Project number: 02111802.r01 Page 2 of 96 MEASUREMENT/TECHNICAL REPORT Intersil Corporation Model : ISL37704M FCC ID: OSZ37704M March 5, 2003 This report concerns: Original grant/certification Class 2 change Verification Equipment type: Unlicensed U-NII Device Deferred grant requested per 47 CFR 0.457(d)(1)(ii) ? Yes No Report prepared by: Name : P.A.J.M. Robben, B.Sc.E.E. Company name : TNO Electronic Products & Services (EPS) B.V. Address : Smidshornerweg 18 Postal code/city : 9822 ZG Niekerk Mailing address : P.O. Box 15 Postal code/city : 9822 TL Niekerk Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : [email protected] The data taken for this test and report herein was done in accordance with 47 CFR Part 15 and the measurement procedures of ANSI C63.4-1992. TNO Electronic Products & Services (EPS) B.V. at Niekerk, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: March 5, 2003 Signature: P. de Beer TNO Electronic Products & Services (EPS) B.V. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2002-08-23) 5 GHz IEEE 802.11a WLAN MiniPCI card Intersil Corporation Intersil ISL37704M OSZ37704M Project number: 02111802.r01 Page 3 of 96 Description of test item Test item : 5 GHz IEEE 802.11a WLAN MiniPCI card Manufacturer : Intersil Corporation Brand : Intersil Model : ISL37704M Serial numbers : 0240 00027 Revision : C8 Receipt number : 1 Receipt date : December 2, 2002 Applicant information Applicant's representative : Mr. D. Sariredjo Company : Intersil Corporation Address : Rembrandtlaan 1a Postal code : 3723 BG City : Bilthoven PO-box : 343 Postal code : 3720 AH City : Bilt…

Text truncated - open the document above for the full version.