OW5BST801IDEN Booster/Amplifier (

User Instruction Manual Model BST801 Maximum Power Dual Band Glass Mount 15” Antenna AC/DC Power Supply (Optional)Allows Use of Booster In Home Or Office Adapter Cables (Order Separately) Specifications: Model:BST801 Frequency Range (Mhz) Uplink 805-821 Downlink 850-866 Output Power max 3 Watt Gain Uplink +13dB Downlink +13dB DC Input Power Stand By DC 12V/0.2A Max In Use DC12V/1.6A Max RFConnector MCT-Male Weight 535g Dimensions 222 x 82 x 25mm Mobile Communication Technologies Inc. Contact Us On The Internet At www.smoothtalker.com SmoothTalker SmoothTalker MCT Dual Band Mag Mount Antenna Maximum Power Dual Band Glass Mag Antenna (Optional) Dual Band Glass Mount 4” Antenna IDEN Booster Amplifier User Instructions Car Booster Instructions: 1 ) Instructions for m **This device should be installed with the antenna supplied. It is required that the antenna is mounted is a suitable location which is a minimum distance of 44cm(17.5 inches)away from the user or nearby persons in order to comply with FCC rules concerning MPE (Maximum Permissible Exposure) safety limits** ) Place the Booster in a suitable location under the dashboard and plug in power cord to cigarette lighter socket of vehicle. 2ounting antenna to vehicle: Magnetic Mount: Place centered, only on vehicle roof or 17.5 inches(44cm) away from any vehicle occupant or nearby persons. Glass mount: The antenna base should be placed on the front or rear windshield and centered as close to the vehicle roof as possible. It should be positioned to provide a minimum distance of 17.5 inches (44 cm) from any of the vehicle occupants or nearby persons. Run the co-ax cable along the head liner or along the floor under the carpet and bring up to the position of the booster. Connect co-ax cable to side of booster marked “Antenna”. Trunk mount: When mounting on trunk the antenna should be placed in the center of the trunk closest to the rear windshield of the vehicle.It should be positioned to provide a minimum distance of 17.5 inches (44 cm) from any of the vehicle occupants or nearby persons. 3) Connect the 100cm cable from cell phone to side of booster marked “Signal Adapter”. When using with Cell Phone:connect cell phone adapter cable from cell phone to 100cm cable. When using with Car Kit: connect Car Kit antenna out, to 100cm cable. PLEASE NOTE: It is normal for the booster to be quite warm while the phone is in use. NOTE: This equipment has been tested and found to comply with the limits for a Class AB digital devices, pursuant to Part 90 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Typical Car Installation "Changes or modifications not expressly approved by MCT, Inc., the party responsible for compliance, could void the user's authority to operate the equipment." www.smoothtalker.com Cellular Phone Hands Free In-car Kit Antenna Car Kit Ant Out Cellular Antenna Adapter Car Booster Car Antenna Must be centered on Roof , Windsheild or Trunk Antenna 4) Tighten all connections securely and move the switch located at the side of the booster to the “on” position. A green light will indicate that the unit is now ready for use.

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 41 of 62 APPENDIX B: CONFIDENTIALITY REQUEST LETTER MCT-- Iw.. Lilit Mobil, Comntunlcatlon Technologies Inc. ~, 360 Ind~a' Pkwr Soultl Unlt.,&Z Aurw8. Ont. c...Q L4G 3V7 Pftone:/90S1726.S444 "..:I'9OSJ7a6~S3 Emtlil mct(cyglobal~crvc.nct September 26/02 American TCe, Inc 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern The following information is to be held confidential pursuant of 47 CFR Part 0 §O.459 and Section 552(bX4) of the Freedom of Information Act, because the information provided contains trade secrets and is proprietary If made public, the information might be used to the disadvantage of the applicant in the mal1<et place. . Schematics . Block Diagram . Parts List Sincerely, ~ 6~c~~nas

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 40 of 62 APPENDIX A: AGENCY AUTHORIZATION LETTER MCT- - , .;:' f ~ -~.. CoIrun~,cIon TtCllltOlogiellnc, ~.. J6O Jnd.-rJaJ PkWJ ~ Unlc#1U AA.-ola, 0"'. can"- UG JV7 Phone:/9D5/7Z6.J444 F..:f90517Z6~~ EM'" [email protected] September 18102. American TCB. I"c. 8731 Whittier Avenue Suite C1 10 McLean, VA 22101 Re Agent Authorization To Whom It May Concern: Tom Vagenas hereby authorizes Rhein Tech LabOratories, Inc (RTL), 360 Herndon Parkw~y. Suite 1400, Herndon, VA 20170 to act as agent. APPLICANT ANTI-DRUG ABUSE CERTIFICATION: In signing this letter, Applicant cer1ifles thst. in the case of an individual applicant, he or she is not subject to ~ denial of federal benefits, that includes FCC benefits. pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 853(1), or, in the case of a I'lon-individual applicant. No party to the application IS subject to a denial of federal benefits that includes FCC benefits. pursuant to that section, For the definition of a .party. for these purposes, see 47 CFR 1.2002(b). Sincerely TO~' Director

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 November 21, 2002 RE: FCC ID: OW5BST801 Attention: Kathy Grzovic I have a few comments on this Application. 1. The label states the maximum antenna gain that can be used is 13dBi. The test report says the maximum antenna tested was 5.6dBi. Documentation needs to be consistent. Please clarify 2. The Manual states that 40 cm separation needs to be kept from all persons. The calculation of the 5.6 dBi antenna comes to 44cm minimum separation. Also, using the 13dBi gain listed on the label the minimum distance would have to be 70 cm. Please revise the documentation to list the actual MPE using the maximum antenna for this system. Please correct the documentation and or test report to reflect this situation. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 51 of 62 APPENDIX J: EXTERNAL PHOTOGRAPHS PHOTOGRAPH 4: EUT TOP VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 52 of 62 PHOTOGRAPH 5: EUT BOTTOM VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 53 of 62 PHOTOGRAPH 6: EUT OUTPUT SIDE Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 54 of 62 PHOTOGRAPH 7: EUT SIDE VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 55 of 62 PHOTOGRAPH 8: EUT SIDE VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 56 of 62 PHOTOGRAPH 9: EUT END VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 57 of 62 PHOTOGRAPH 10: MAGNETIC MOUNT ANTENNA WITH CONNECTOR Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 58 of 62 PHOTOGRAPH 11: 0DB GLASS MOUNT ANTENNA WITH CABLES AND CONNECTORS

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 42 of 62 APPENDIX C: LABEL AND LOCATION INFORMATION PHOTOGRAPH 1: LABEL LOCATION ON EUT BOTTOM Please see the following page for a sample of the label. FCC ID LABEL HERE Maximum power Contact us at: www.smoothtalker.com Model BST801 Frequency:TX IDEN SYSTEM Output Power:Max 3 watt Structure: Full Duplex Gain: TX Max 13dB RX Max13dB RX IDEN SYSTEM Variable Gain R.F. Booster S/N#XXX123 FCC ID: OW5BST801 Smoothtalker Canada: XXXXXXXXXX TM

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 59 of 62 APPENDIX K: INTERNAL PHOTOGRAPHS PHOTOGRAPH 12: PCB FRONT VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 60 of 62 PHOTOGRAPH 13: PCB REAR VIEW

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 47 of 62 APPENDIX H: MAXIMUM PERMISSIBLE EXPOSURE FCC RULES AND REGULATIONS PART 1.1307, 1.1310, 2.1091, 2.1093: RF EXPOSURE COMPLIANCE 1. GENERAL INFORMATION: • FCC ID: OW5BST801 • Environment: General Population/Uncontrolled Exposure • Device category: Mobile per Part 2.1093 2. OPERATING CONFIGURATIONS AND TEST CONDITIONS: 2.1 ANTENNA TYPE(S): Antenna Type Gain (dBi) M OBILE C OMMUNICATIONS T ECHNOLOGIES , I NC . F LEXIBLE D UAL C OIL WIRE 5.6 M OBILE C OMMUNICATIONS T ECHNOLOGIES , I NC M AGNETIC M OUNT 1/8 W AVE W IRE 5.5 M OBILE C OMMUNICATIONS T ECHNOLOGIES , I NC G LASS M OUNT 1/8 W AVE W IRE -2 3. OPERATING CONDITIONS: The BST-800 Amplifier is a automobile cellular band amplifier for uplink frequencies 824-849 MHz, and the peak conducted and peak radiated (ERP) output power does not exceed 3 W. 4. TEST SIGNAL, TIME-AVERAGING, MAX. MEASURED OUTPUT POWER: Modulation Type/Modes: IDEN Frequency Range Freq. Tolerance (ppm) Emission Designator 806-821 MHz N/A AMP Output Power (Watt/dBm) High (Watt) High (dBm) Time averaging (__% Duty Cycle) Conducted 3.0 34.8 N/A Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 48 of 62 From FCC 1.1310 table 1A, the maximum permissible RF exposure for an uncontrolled environment is f/1500 mW/cm 2 =806 MHz to 821 MHz/1500= 0.54 –0.55 mW/cm 2 . The Electric field generated for a 0.57mW/cm 2 exposure (S) is calculated as follows: S = E 2 /Z where: S = Power density E = Electric field Z = Impedance. ZSE⋅= 0.55 mW/cm 2 = 5.5 W/m 2 The impedance of free space is 377 ohms, where E and H fields are perpendicular. Thus: 3775.5⋅=E = 45.5 V/m which is equivalent to 0.55mW/cm 2 Using the relationship between Electric field E, Power in watts P, and distance in meters d, the corresponding Antenna numeric gain G and the transmitter output power. d GP mVE ×× = 30 )/( Power density: 5.2073 )/( 2 2 E cmmWP d = MPE Calculation: The maximum distance, from the antenna at which MPE is met or exceeded, is calculated from the equation relating field strength E in V/m, transmit power P in Watts, transmit antenna numeric gain G, and separation distance in meters above and solving for d below: E GP d ×× = 30 5.45 6.37.330 44.0 ×× =m The limit for general population/uncontrolled exposure environment from 300 to 1500MHz is f/1500 2 /cmmW . SEPARATION DISTANCE: Highest Antenna Gain = 3.6 Power B (Watt) = 3.7 Separation Distance A (in) (m) 17.3 0.44 Notes: A = Distances are calculated for the largest (worst-case) separation distance as applicable B = Measured radiated output power ERP

Engineering and Testing for EMC and Safety Compliance 360 Herndon Parkway, Suite 1400 Herndon, VA 20170 Phone: 703-689-0368; Fax: 703-689-2056; Metro: 703-471-6441 CERTIFICATION APPLICATION REPORT FCC PART 90 CERTIFICATION & INDUSTRY CANADA CERTIFICATION Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689-0368 360 Herndon Parkway Fax: 703-689-2056 Suite 1400 Web Site: www.rheintech.com Herndon, VA 20170 E-Mail : [email protected] Applicant Information: MCT Inc. Phone: 905-726-3444 ext. 202 Contact: John Vagas Fax: 905-726-4233 360 Industrial Pkwy South Unit 1 Aurora, Ontario L4G3V7 Canada E-Mail: s [email protected] FCC ID: OW5BST801 GRANTEE FRN NUMBER: 0007702509 PLAT FORM: N/A RTL WORK ORDER NUMBER: 2002165 MODEL(S): BST801 RTL QUOTE NUMBER: QRTL02-554 DATE OF TEST REPORT: November 18, 2002 American National Standard Institute: ANSI C63.4: Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI/TIA/EIA603- 1992 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards ANSI/TIA/EIA 603-1-1998 Addendum to ANSI/TIA/EIA 603-1992 TIA/EIA /IS-98-A Recommended Minimum Performance standards for Dual-Mode Wideband Spectrum Cellular Mobile Stations FCC Classification: AMP - Amplifier FCC Rule Part(s): Part 90: Private Land Mobile Radio Services Industry Canada Standard: RSS-119: Land Mobile and Fixed Radio Transmitters and Receivers 27.41 to 960.0 Digital Interface Information Digital Interface was found to be compliant Receiver Information Receiver was found to be compliant Frequency Range (MHz) Output Power (W) Frequency Tolerance Emission Designator 806-821 3 N/A AMP We, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from the FCC Part 2, FCC Part 90, Industry Canada RSS-119, and ANSI C63.4. Signature: Date: November 18, 2002 Typed/Printed Name: Desmond A. Fraser Position: President No part of this report may be reproduced without the full written approval of Rhein Tech Laboratories, Inc. Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 2 of 62 TABLE OF CONTENTS 1 GENERAL INFORMATION ................................................................................................................................................... 5 1.1 TEST FACILITY .............................................................................................................................................................. 5 1.2 RELATED SUBMITTAL(S)/GRANT(S) ........................................................................................................................... 5 2 TESTED SYSTEM DETAILS ................................................................................................................................................. 6 2.1 COMPONENTS .............................................................................................................................................................. 6 2.2 CONFIGURATION OF TESTED SYSTEM ..................................................................................................................... 6 3 FCC PART 2.1033(C)(8); DC VOLTAGES AND CURRENTS.............................................................................................. 7 3.1 TEST EQUIPMENT......................................................................................................................................................... 7 4 FCC RULES AND REGULATIONS PART 2.1046 (A): RF POWER OUTPUT: CONDUCTED ........................................... 8 4.1 TEST PROCEDURE ....................................................................................................................................................... 8 4.2 TEST DATA .................................................................................................................................................................... 8 4.3 TEST EQUIPMENT....................................................................................................................................................... 17 5 FCC RULES AND REGULATIONS PART 2.1046 (A); RF POWER OUTPUT.................................................................. 18 5.1 TEST PROCEDURE ..................................................................................................................................................... 18 5.2 TEST DATA .................................................................................................................................................................. 18 5.3 TEST EQUIPMENT....................................................................................................................................................... 19 6 FCC RULES AND REGULATIONS PART 2.1049 (C) (1): OCCUPIED BANDWIDTH ...................................................... 20 6.1 TEST PROCEDURE ..................................................................................................................................................... 20 6.2 TEST DATA .................................................................................................................................................................. 20 6.3 TEST EQUIPMENT....................................................................................................................................................... 22 7 FCC RULES AND REGULATIONS PART 2.1051: SPURIOUS EMISSIONS AT ANTENNA TERMINALS...................... 23 7.1 TEST PROCEDURE ..…

Text truncated - open the document above for the full version.

Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 49 of 62 APPENDIX I: TEST CONFIGURATION PHOTOGRAPHS PHOTOGRAPH 2: RADIATED EMISSIONS REAR VIEW Rhein Tech Laboratories Mobile Communication Technologies, Inc. 360 Herndon Parkway 3W Amplifier Suite 1400 FCC: Part 90 & Industry Canada RSS-119 Herndon, VA 20170 FCC ID: OW5BST801 http://www.rheintech.com RTL WO#: 2002165 Page 50 of 62 PHOTOGRAPH 3: RADIATED EMISSIONS FRONT VIEW