
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Draft Operation Manual Opening and closing ñ from the outside Using the remote control The remote control makes unlocking and locling of the doors of your vehicle very convenient. In addition, it provides two additional functions that you can only execute via the remote control: • Switching on the interior lamps and illuminating the exterior door handles. With this function you can also ìsearchî for your vehicle, when parked in an underground garage, for example. • Panic Mode In case of danger, you can trigger an alarm. The antitheft system is also deacti- vated/activated simultaneously with the unlocking or locking of the vehicle, and the alarm system is disarmed/armed. For US owners only The transmitter and receiver units comply with part 15 of the FCC rules. operation is governed by the following: FCC ID P3OM400 Compliance statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
The P3OS4633B cease automatically deactivates at less then 5 seconds once the button is released in accordance with 15.231(a)(1). The fixture that holds the transmitter for the test is completely non metal.
Request for Confidentiality February 21, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: P3OS4633B Please be advised that the following information is to be held confidential on behalf of META System S.p.A.: • Theory of Operation • Block Diagram • Schematic Diagram The application contains technical information which META System S.p.A. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory Johann Roidt
FCC ID: P3OS4633B External Photos
FCC ID: P3OS4633B Label Information
FCC ID: P3OS4633B Internal Photos
FCC ID: P3OS4633B Internal Photos
EMV-Pr ̧fzentrum EMI/EMC-Testcenter Page 1 of 25 Pages Straubing, 31 January 2002 T E S T - R E P O R T No. 55166-20012 for S4633B Remote Control Transmitter Applicant: META System S.p.A. Purpose of testing: To show compliance with FCC Code of Federal Regulations, Part 15 Subpart C, Section ß15.231 Industry Canada Radio Standards Specification RSS-210 Issue 2, Section 6.1 (Category I Equipment) Note: The test data of this report relate only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 2 of 25 Pages Table of Contents 1. Administrative Data.................................................................................... 3 2. Identification of Test Laboratory................................................................. 4 3. Summary of Test Results........................................................................... 5 4. Operation Mode of EUT ............................................................................. 6 5. Configuration of EUT and Peripheral Devices ........................................... 7 6. Measuring Methods ................................................................................... 8 6.1. Bandwidth of Emission(FCC ß15.231.c / RSS-210 Section 6.1.1.c).................................................................................... 8 6.2. Radiated Emission 30 MHz - 1 GHz (FCC ß15.205.a,b, ß15.209, ß15.231.b / RSS-210 Sections 6.1.1.b, 6.3) ......................... 9 6.3. Radiated Emission 1 GHz - 10 GHz (FCC ß15.205.a,b, ß15.209, ß15.231.b / RSS-210 Sections 6.1.1.b, 6.3) ....................... 11 7. Equipment List ......................................................................................... 13 8. Photographs Taken During Testing ......................................................... 15 9. List of Measurements............................................................................... 19 9.1. List of Measurements According To FCC Part 15 Subpart C .......................................................................................... 20 9.2. List of Measurements According To Industry Canada RSS-210 ............................................................................................ 20 10. Referenced Regulations .......................................................................... 21 11. Test Results ............................................................................................. 22 EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 3 of 25 Pages 1. Administrative Data Equipment Under Test (EUT): S4633B Serial number(s): 0001 Type of equipment: Remote Control Transmitter Parts/accessories: --- FCC-ID: Applicant: (full address) META System S.p.A. Via Majakovskij 10b/c/d/e I-42100 Reggio Emilia Contract identification: --- Contact person: Mr. Giorgio Maldini Manufacturer: META System S.p.A. Receipt of EUT: 18 December 2002 Date of test: January 2002 Note: Responsible for testing: Johann Roidt Responsible for test report: Johann Roidt EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 4 of 25 Pages 2. Identification of Test Laboratory Test Laboratory: Senton GmbH EMI/EMC Test Center (full address): Aeussere Fruehlingstrasse 45 D-94315 Straubing Germany Contact person: Mr. Johann Roidt Communication: Telephone (+49) 0 94 21 / 55 22-0 Fax (+49) 0 94 21 / 55 22-99 eMail: [email protected] FCC registration number: 90926 Industry Canada file number: IC 3050 EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 5 of 25 Pages 3. Summary of Test Results The tested sample complies with the requirements set forth in the Code of Regulations Part 15 Subpart C, Section ß15.231 (intentional radiators) of the Federal Communication Commission (FCC) and the Radio Standards Specification RSS-210 Issue 2, Section 6.1 for Low Power Licence-Exempt Radiocommuniction Devices of Industry Canada. Johann Roidt Technical Manager EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 6 of 25 Pages 4. Operation Mode of EUT TX continously active with internal modulation EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 7 of 25 Pages 5. Configuration of EUT and Peripheral Devices Configuration of cables of EUT - Not applicable Configuration of peripheral devices connected to EUT - Not applicable EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 8 of 25 Pages 6. Measuring Methods 6.1. Bandwidth of Emission(FCC ß15.231.c / RSS-210 Section 6.1.1.c) The Bandwidth of Emission is measured with a spectrum analyzer connected to measuring antenna (radiated measurement) or test fixture while EUT is operating in transmit mode with modulation at the appropriate center frequency. To increase received signal level distance to EUT is reduced (appropriate level offset is included). The spectrum analyzer was set to: RBW = 10 kHz, VBW = 10 kHz, span = 1 MHz, sweep = 40 ms See figure 1 for the measurement setup. Test equipment used (see equipment list for details): 02, 55, 67 5 2 1 4 3 Figure 1: Measurement setup for bandwidth of emission test 1 Transmitter (EUT) 3 Test fixture 2 Wooden table 4 Test cable 5 Spectrum analyzer EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 9 of 25 Pages 6.2. Radiated Emission 30 MHz - 1 GHz (FCC ß15.205.a,b, ß15.209, ß15.231.b / RSS-210 Sections 6.1.1.b, 6.3) Radiated emissions are measured over the frequency range from 30 MHz to 1 GHz. The bandwidth of the EMI-receiver …
Text truncated - open the document above for the full version.
EMV-Pr ̧fzentrum EMI/EMC-Testcenter Test report for FCC Part 15, section 15.231 Test Report No. 55166-20012 Page 18 of 25 Pages EUT position: Upright
Aeussere Fruehlingstrasse 45 · Straubling · Germany
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 433.92 MHz - 433.92 MHz | - |

OBD device (On Board Diagnostic device) with Bluetooth 4.0 low energy
Equipment Class
DTS - Digital Transmission System
OBD device (On Board Diagnostic device) with Bluetooth 4.0 Low Energy
Equipment Class
DTS - Digital Transmission System
Microwave Sensor for intrusion and movement detection
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
TXBMWMR
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Telematic Tracking System
Equipment Class
PCB - PCS Licensed Transmitter