P5L-FWTG30Fixed Wireless Terminal

Ericsson G30 / G35 Fixed Wireless Terminal for GSM Mobile Networks User Guide E EN-LZT 151 233 FWT User ... page 1 Cyan Magenta Yellow Black Cyan Magenta Yellow Black Monday, May 21, 2007 16:48 EN/LZT 151 233 R1D © Ericsson AB 2006 – All Rights Reserved EN-LZT 151 233 FWT User ... page 2 Cyan Magenta Yellow Black Cyan Magenta Yellow Black Monday, May 21, 2007 16:48 Fixed Wireless Terminal: G30 & G35 3 Table of Contents Table of Contents ........................................ 3 Welcome ..................................................... 4 Fixed Wireless Terminal................................ 6 Installation ................................................... 9 Connecting Devices to the FWT ................. 15 Advanced Features.................................... 20 Troubleshooting......................................... 29 Technical Data........................................... 33 Accessories ............................................... 36 Product Care and Safety............................ 38 Warranty.................................................... 42 Glossary .................................................... 45 Index ......................................................... 47 4 Fixed Wireless Terminal: G30 & G35 Welcome Welcome to the User Guide for the G30 / G35 Fixed Wireless Terminal. Important information: Some of the services described in this guide might not be supported by all networks. Please, contact your network operator for information on different network ser- vices operational in your GSM network. The latest version of this user guide can be downloaded from: http://www.ericsson.com/enterprise/library/manual.shtml Disposal of the product Your product should not be placed in municipal waste. Please check local regulations for disposal of electronic products. Copyright No part of this document may be reproduced without the written per- mission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind result- ing from the use of this document. Fixed Wireless Terminal: G30 & G35 5 Warranty ERICSSON MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR- TICULAR PURPOSE. Ericsson shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance or use of this material. Declaration of Conformity Hereby, Ericsson Enterprise AB declares that this product is in confor- mity with the requirements and other relevant provisions of the European R&TTE directive 1999/5/EC. Details to be found at: http://ericsson.com/sdoc . FCC Statement This device complies with the limits for a Class B digital device, pursuant to part 15 and part 24 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par- ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Changes or modifications not expressly approved by Ericsson could void the user’s authority to operate the equipment ICES Statement This Class B digital device complies with Canadian ICES-003. 6 Fixed Wireless Terminal: G30 & G35 Fixed Wireless Terminal Product Description The FWT is a flexible and cost-effective solution for connection to the wireless GSM network when there is no fixed line infrastructure or if you need additional telephone lines. The G35 can also be connected to a PBX so you can benefit from the Least Cost Routing (LCR) capabilities offered by most PBX vendors to optimize your costs by routing outgoing calls to mobile phones through the GSM network. The FWT allows automatic network searching between GSM 850/1900 or GSM 900/1800 frequencies, ensuring world wide coverage in the GSM networks. The FWT features the latest technology, which makes it perfect for eve- ryday communication: • Available in 2 dual-band GSM models (GSM 850/1900 or GSM 900/1800. • Telephone line providing high quality speech. • Battery back-up (optional). • PBX connectivity (only on the G35 model). Fixed Wireless Terminal: G30 & G35 7 Supplied Parts After unpacking, please check that the following parts and list of compo- nents are included: List of Components 1. FWT unit 2. Antenna 3. 4 x mounting screws 4. Power cable (USA, UK, EU or AUS) 5. AC/DC adapter 6. Wall mount bracket 7. Telephone cable 8. Quick Guide and User Guide manuals 8 Fixed Wireless Terminal: G30 & G35 External Connector and Indicators Fixed Wireless Terminal: G30 & G35 9 Installation SIM Card Your network operator provides you with a SIM (Subscriber Identity Module) card. The SIM card contains information about your telephone number and the services included in your subscription. Preparing Your FWT You need to follow these steps before you install the FWT on the wall and finalize all connections. Warning: The FWT should be switched off before inserting or removing your SIM card or connecting any devices to the FWT. Assembly 1. Connect the antenna. 10 Fixed Wireless Terminal: G30 & G35 2. Remove the front cover, by pressing down and pushing the small tab that is in the cent…

Text truncated - open the document above for the full version.

External – front view External – back view External – bottom view

Limited Internal MARKING DRAWING 1 (2) Prepared (also subject responsible if other) No. EBC/FLEXSA (Titus Mavuso) 151 86-KRC 161 080/0 Uen Approved Checked Date Rev Reference EBC/FLEXSA (Bernd Kleyenstuber) 2007-02-20 D Type Label - KRC 161 080-083 Note 1 Note 2 Note 3 Note 4 Note 5 Note 6 Note 7 Note 8 Note 9 Note 10 G3xy 0168 INPUT: 7.5V = 0.8A TYPE: FWTG30 G H I J FCC ID: P5L-FWTG30 IC: 287X-FWTG30 KRC xxx xxxx/x Rzz S/N: xxxxxxxxxx IMEI: xxxxxx-xx-xxxxxx-x Made in XXXyyWww Listed I.T.E. E226262 Notes: 1. Ericsson logotype according to 190 89-EN/LZT 108 901 2. CE 0168 logotype according to 1424-SVF 930 52 Notified body number (0168), according to the TTE Annex III certificate for the production plant. UL Symbol according to UL60950-1. Overall diameter of the UL mark is 4mm. Registered trademark® letter: “Helvetica Condensed Medium”. Rest of the lettering: ”Helvetica Condensed Black” 3. The WEEE symbol of the crossed out wheeled bin according to EN 61429 Amd. Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 202/96/EC (WEEE). 4. TYPE: FWTG30 G H I J G = R-state identification of the software (CXP) module H = R-state identification of the hardware I = PCBA structure identification (ROA) J = R-state identification of the PCBA (ROA) Note: G, H, I and J fields according to 1/151 86-KRC 161 084 Limited Internal MARKING DRAWING 2 (2) Prepared (also subject responsible if other) No. EBC/FLEXSA (Titus Mavuso) 151 86-KRC 161 080/0 Uen Approved Checked Date Rev Reference EBC/FLEXSA (Bernd Kleyenstuber) 2007-02-20 D 5. FCC certification: FCC ID: P5L-FWTG30 6. Industry Canada: IC: 287X-FWTG30 7. Product number with revision state: KRC xxx xxx Rzz 8. Serial number xxxxxxxxxx 9. IMEI number: xxxxxx-xx-xxxxxx-x 10. Country of manufacture: Made in xxxxx Date of production: yyyy = year, ww = week All printing will be readable and permanent. Text should be centred. Material used for label marking is defined in product specification 1301-SVF 904 04 Printing dimensions: • Type size: min 1.1mm • Line spacing: min 1.0mm • Ericsson logo: min 2.25mm • CE symbol: min 5.0mm • Notified body (0168): same size as CE symbol

External – back view

Internal – top view Internal – bottom view

221 02-FGB 101 350 Uen Rev D G3x Series Fixed Wireless Terminals for GSM/EDGE Mobile Networks Technical Product Description The product description for the Fixed Wireless Access Terminals G3x Series offers a complete description of the product from a hardware and software perspective. Applications such as fixed line replacement and PBX Least Cost Routing for businesses are also briefly described. G3x Series 221 02-FGB 101 350 Uen Rev D © Ericsson Enterprise AB 2 (19) Contents 1 G3x Series Overview ............................................................................. 3 2 Features.................................................................................................. 4 3 Technical Specifications....................................................................... 7 4 Product Approvals .............................................................................. 12 5 Standard Product Kit........................................................................... 13 6 Accessories ......................................................................................... 13 7 Spare Parts........................................................................................... 15 8 Security ................................................................................................ 16 9 Applications ......................................................................................... 17 10 Acronyms ............................................................................................. 19 G3x Series 221 02-FGB 101 350 Uen Rev D © Ericsson Enterprise AB 3 (19) 1 G3x Series Overview The Fixed Wireless Access is a cost efficient solution for providing fixed voice, data and fax services to areas with no fixed infrastructure in a cost efficient way utilizing an existing GSM infrastructure. Data connectivity is provided either through circuit switched or packet switched GPRS/EDGE technology, offering an ideal solution for Internet access. Additionally the terminal can be connected to a PBX for LCR of outgoing mobile calls enabling increased traffic for the operator and cost savings for businesses. The G3x fixed wireless terminal series has the following main characteristics: • Four GSM bands available in two different models 850/1900 & 900/1800 • EDGE Multislot class 10 (4+1) alt (3+2) or GPRS Multislot class 10 (4+1) alt (3+2) packet switched data transmission, comparable to PSTN modem connections with ìalways-onî connectivity?? • Circuit switched data 9600 bps • GSM V.42bis data compression • Integrated V.90 analog modem • Single Telephony line interface with standard connection for voice, fax and modem that can facilitate up to 3 devices in parallel, though only 1 device can be used at a time. • Fax and data transmission using USB connection • The terminal can be powered from AC mains, DC power source or an internal battery • Integrated design for high quality and performance • PBX connectivity via analog trunk • Remote Management capability The G3x fixed wireless terminal series consist of the following models: • G30 ñ For voice only • G31 ñ For data only • G32 ñ Voice, data and fax • G35 ñ For PBXs and least cost routing • G35 ñ For PBXs, least cost routing, data and fax G3x Series 221 02-FGB 101 350 Uen Rev D © Ericsson Enterprise AB 4 (19) 2 Features G30 G31 G32 G35 G36 Voice Yes - Yes Yes Yes Data - Yes Yes - Yes SMS - Yes Yes - Yes Fax - PC fax Yes - Yes PBX - - - Yes Yes GSM suppl. services Yes - Yes Yes Yes Voice mail alert Yes - Yes Yes Yes Phone Book Yes - Yes Yes Yes Pre-paid services Yes Yes Yes Yes Yes Operator Name Yes - Yes Yes Yes DTMF - DTMF DTMF DTMF AT comm. AT comm. AT comm. AT comm. AT comm. Terminal administration - Web I/F Web I/F - Web I/F Remote Management Yes Yes Yes Yes Yes The table above is a summary of what features are available in each terminal. The features are described below. 2.1 Voice Standard voice service is provided by the RJ-11 connector by using a standard analogue phone. 2.2 Data Data connectivity is provided via the RJ-11 connector or the USB connector. Please note that the maximum transmission speed using the 2 wire line RJ-11 connector is limited by the V.90 analog modem in the PC, normally 56 kbps. 2.3 SMS The Terminal can send SMS:s by connecting a PC to the USB port. The PC needs to have a 3 rd party application. G3x Series 221 02-FGB 101 350 Uen Rev D © Ericsson Enterprise AB 5 (19) 2.4 Fax The data capable models of the Terminal can send faxes either through the 2-wire interface or by connecting a PC to the USB port. The PC needs to have a 3 rd party application. 2.5 PBX This feature allows connection to a PBX. It supports polarity reversal (only on G35 and G36) and loop-break. 2.6 GSM Supplementary Services The Terminal supports GSM supplementary services, in order to use the services; the operator network must support them. Offered supplementary services can only be used with a DTMF telephone connected to the Terminal. • Call Waiting • Call Divert (Forward) • Call Barring • Call Hold • Call Transfer • Multiparty call • Dual numbering The Terminal can handle alternate line service handle (2 voice lines) with a dual number SIM card. Alternative service handling can be managed from the telephone connected to the Terminal. You will receive all the incoming calls addressed to any of your numbers independently of the selected line but your outgoing calls will be charged to the line that you have selected (1 or 2) 2.7 Voice Mail alert The answering service of the GSM network (operator dependant) allows callers to leave a voice message when you cannot answer your calls. The Terminal gives a special acoustic indication to indicate the presence of voice mail. 2.8 Phone Book Telephone numbers can be stored for abbreviated dialing in either the SIM card memory or the Terminal memory (up to 99 numbers in each). G3x Series 221 02-FGB 101 350 Uen Rev D © Ericsson Enterprise AB 6 (19) 2.9 Pre-paid services The operator can offer …

Text truncated - open the document above for the full version.

UAA3537G Low power GSM/GPRS multi-band transceiver Rev. 0.09 — 6 January 2005Preliminary Specification c c 1.General description The UAA3537 is a fully-integrated GSM hand-held transceiver 2.Features n Multiple band application (850, 900, 1800 and 1900 MHz frequency bands). nLow noise and wide dynamic range low IF receiver nGPRS multi slot class 12 capable nMore than 3 dB on chip image rejection in receive nMore than 68 dB gain control range in receive nDirect-up conversion in transmit nFully-integrated fractional-N RF-synthesizer with AFC control possibility nFully-integrated RF VCO with integrated supply regulator nsemi-integrated reference oscillator with integrated supply regulator nFully differential design to minimize cross-talk and spurs nFunctional down to 2.4 V and up to 3.0 V nThree output to control RF frontend switches (pin diodes) n3-wire serial bus interface nHVQFN40 package 3.Applications n GSM 850 MHz, GSM 900 MHz, DCS 1800 MHz and PCS 1900 MHz hand-held transceiver. 4.Quick reference data [1]for V CC <2.7 V only functionality is guaranted, AC characteristics are not guaranted Table 1:Quick reference data SymbolParameterConditionsMinTypMaxUnit V CC Supply voltagenote12.43.0V T amb operating ambient temperature -3070°C Philips Semiconductors UAA3537G Low power GSM/GPRS multi-band transceiver Preliminary SpecificationRev. 0.09 — 6 January 20052 of 36 © Philips Electronics N.V. . All rights reserved. 5.Ordering information 6.Block diagram Table 2:Ordering information Type numberPackage NameDescriptionVersion UAA3537GHNHVQFN40micro leadframe package; 40 leads; body 6x 6x 0.85 mmSOT618-1 Fig 1.Block diagram. PFDCP PWR EN GND LBIA LBIB V CC(RF) V CC(CP) REFIN EN CLK DATA QA QB IA IB EXTRES V CC(SYN) FracN HBIA HBIB RFTUNE CLKFDBX CLKOUT V CC(REF) 26MHz V CC (RFLO) DIV DIV QUAD DIV VREG VREG CTRL LBOB LBOA HBOA HBOB V CC(RFVCO) VDD V CC(IF) SWBIA SWBIB FESW3 FESW2 SWON FESW1 3W BUS CTL Front end switches QUAD VDD Philips Semiconductors UAA3537G Low power GSM/GPRS multi-band transceiver Preliminary SpecificationRev. 0.09 — 6 January 20053 of 36 © Philips Electronics N.V. . All rights reserved. 7.Pinning information 7.1Pinning 7.2Pin description Fig 2.Pin configuration (Transparent top view)). SOT618-1 U AA3537GHN T ransparent top view 1021 922 823 724 625 526 427 328 229 130 11121314151617181920 40393837363534333231 t
erminal 1 index area CLK VCCREF VDD CLKOUT SWON EN DATA CLKFDBX REFIN REFGND LBOARFGND1 HBIB HBIA RFGND3 RFGND2 LBOBSWBIB VCCRF SWBIA CTRL RFTUNE VCCCP VCCRFLO VCCSYN VCCRFVCO T  UNEGND EXTRES LBIA LBIB QA IA FESW3 FESW1 VCCIF QB IB FESW2 HBOB HBOA Table 3:Pin description SymbolPinDescription HBOA1DCS1800 and PCS1900 bands RF output HBOB2DCS1800 and PCS1900 bands RF output FESW13front end switch control output FESW24front end switch control output FESW35front end switch control output IB6baseband input-output; I path Philips Semiconductors UAA3537G Low power GSM/GPRS multi-band transceiver Preliminary SpecificationRev. 0.09 — 6 January 20054 of 36 © Philips Electronics N.V. . All rights reserved. IA7baseband input-output; I path QB8baseband input-output; Q path QA9baseband input-output; Q path V CC(IF) 10IF supply SWON11front end switch control input DATA123-wire bus; DATA input CLK133-wire bus; CLK input EN143-wire bus; ENABLE control pin VDD15digital supply CLKOUT16reference oscillator output V CC(REF) 17reference regulator output and reference supply CLKFDBX18reference oscillator feedback REFGND19GND for reference oscillator REFIN20reference oscillator input V CC(SYN) 21synthesizer and reference regulator supply CTRL22global enable control pin V CC(RFVCO) 23RFVCO regulator output and RF VCO supply RFTUNE24tuning input of RF VCO TUNEGND25ground for RF VCO tuning V CC(CP) 26RF charge pump supply EXTRES27reference resistor for RF PLL charge pump gains V CC(RFLO) 28RF LO and RFVCO regulator supply LBIA29receiver GSM850/900 RF input LBIB30receiver GSM850/900 RF input V CC(RF) 31RF front end and transmit part supply SWBIA32receiver DCS1800/PCS1900 or GSM850/900 switched RF input SWBIB33receiver DCS1800/PCS1900 or GSM850/900 switched RF input RFGND134ground for front end HBIA35receiver DCS1800 or PCS1900 bands RF input HBIB36receiver DCS1800 or PCS1900 bands RF input RFGND237ground for front end LBOA38GSM850 and GSM900 RF output LBOB39GSM850 and GSM900 RF output RFGND340ground for front end Table 3:Pin description...continued SymbolPinDescription Philips Semiconductors UAA3537G Low power GSM/GPRS multi-band transceiver Preliminary SpecificationRev. 0.09 — 6 January 20055 of 36 © Philips Electronics N.V. . All rights reserved. 8.Functional description 8.1Receiver The receiver consists of two distinct parts, the RF receiver front-end and the IF section. The RF receiver front-end amplifies the GSM850 (869-894) GSM900 (925-960 MHz), DCS1800 (1805-1880 MHz) or PCS1900 (1930-1990 MHz) aerial signal, converts the chosen channel down to a low IF of -100kHz, and provides in addition more than 35dB image suppression. Four LNAs are available on chip and can be configured to allow 3 bands (low, high and switched). The switched LNA will be used for roaming in different countries. Some selectivity is provided at this stage by an on-chip low-pass filter, and channel selectivity is provided by means of a high performance integrated band-pass filter. The IF section further amplifies the wanted channel, performs gain control to tune the output level to the desired value and rejectsDC. ThisDCrejectionis realisedwithanactive highpasscircuitandoperates eithercontinuouslyorkeepstheacquiredoffsetcorrectionduringtheburstdepending on the programming. 8.2Transmitter The transmitter is fully differential using a direct-up conversion architecture. It consists of a single side band power up mixer. Gain is set over 6 dB via the 3-wire serialprogrammingbus. Thefully-integratedVCOandthepowermixeraredesigned to achieve LO suppression, quadrature phase error, quadrature amplitude balance and low no…

Text truncated - open the document above for the full version.

Fixed Wireless Terminal: G30 & G35 9 Installation SIM Card Your network operator provides you with a SIM (Subscriber Identity Module) card. The SIM card contains information about your telephone number and the services included in your subscription. Preparing Your FWT You need to follow these steps before you install the FWT on the wall and finalize all connections. Warning: The FWT should be switched off before inserting or removing your SIM card or connecting any devices to the FWT. Assembly 1. Connect the antenna.

REPORT ON Limited FCC CFR 47: Parts 22 and 24 and Industry Canada RSS-GEN, RSS-132 and RSS-133 Testing of an Ericsson AB Fixed Wireless Terminal COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 April 2007 Choose certatiny. Add value. COMMERCIAL-IN-CONFIDENCE TUV Product Service Ltd, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuvps.co.uk ; www.babt.com Doc Number 75900844 Report 01 Issue 1 Page 1 of 25 COMMERCIAL-IN-CONFIDENCE REPORT ON Limited FCC CFR 47: Parts 22 and 24 and Industry Canada RSS-GEN, RSS-132 and RSS-133 Testing of an Ericsson AB Fixed Wireless Terminal FCC ID: P5L-FWTG30 Industry Canada ID: 287X-FWTG30 Doc Number 75900844 Report 01 Issue 1 April 2007 PREPARED FOR SGS Telecommunications Europe Ltd Melbourn Science Park Cambridge Road Melbourn Herts SG8 6HB PREPARED BY J Plummer Technical Author APPROVED BY J Adams Authorised Signatory DATED 19 th April 2007 ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47: Parts 22 and 24 and RSS-GEN, RSS-132 and RSS-133. The sample tested was found to comply with the requirements defined in the applied rules. Test Engineers; J Holcombe A Hubbard G Lawler COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 Page 2 of COMMERCIAL-IN-CONFIDENCE CONTENTS Section Page No 1 REPORT SUMMARY 1.1 Status .................................................................................................................................. 4 1.2 Introduction.......................................................................................................................... 5 1.3 Brief Summary of Results ................................................................................................... 7 1.4 Product Information............................................................................................................. 9 1.5 Test Conditions ................................................................................................................... 10 1.6 Deviations from the Standard............................................................................................. 10 1.7 Modification Record ............................................................................................................ 10 2 TEST DETAILS FCC Part 22 and Industry Canada RSS-132 2.1 Effective Radiated Power (Radiated).................................................................................. 12 2.2 Radiated Spurious Emissions Block Edge.......................................................................... 13 FCC Part 24 and Industry Canada RSS-133 2.3 Maximum Peak Output Power (Radiated) .......................................................................... 15 2.4 Radiated Spurious Emissions ............................................................................................. 16 3 TEST EQUIPMENT 3.1 Test Equipment ................................................................................................................... 19 3.2 Measurement Uncertainty ................................................................................................... 21 4 PHOTOGRAPHS 4.1 Photographs of Equipment Under Test (EUT).................................................................... 23 5 ACCREDITATION, DISCLAIMERS AND COPYRIGHT 5.1 Accreditation, Disclaimers and Copyright ........................................................................... 25 FCC ID: P5L-FWTG30 Industry Canada ID: 287X-FWTG30 COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 Page 3 of 25 COMMERCIAL-IN-CONFIDENCE SECTION 1 REPORT SUMMARY Limited FCC CFR 47: Parts 22 and 24 and Industry Canada RSS-Gen, RSS-132 and 133 Testing of a SGS Telecommunications Europe Ltd Fixed Wireless Terminal FCC ID: P5L-FWTG30 Industry Canada ID: 287X-FWTG30 COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 Page 4 of 25 COMMERCIAL-IN-CONFIDENCE 1.1 STATUS Equipment Under Test Fixed Wireless Terminal Objective To undertake measurements to determine the Equipment Under Test's (EUT's) compliance with the specification. Name and Address of Client SGS Telecommunications Europe Ltd Melbourn Science Park Cambridge Road Melbourn Herts SG8 6HB Manufacturer Ericsson AB Model Number G30a Part Number DPY 901 560/0 Serial Number TU8A115166 and IMEI 358211-00-033312-1 Build Status Pilot Software Version R1N (38430704) Declared Variants None Test Specification/Issue/Date FCC CFR 47: Part 22, Subpart H: 2004 FCC CFR 47: Part 24, Subpart D: 2004 RSS-Gen: Issue 1: 2005 RSS-132: Issue 1: 2002 RSS-133: Issue 3: 2005 Number of Items Tested One Security Classification of EUT Commercial-in-Confidence Incoming Release Declaration of Build Status Date 19 th March 2007 Disposal Held pending disposal Order Number 092/149170 Date 28 th February 2007 Start of Test 2 nd April 2007 Finish of Test 14 th April 2007 Related Documents ANSI C63.4: 2001 RSS-212, Issue 1: 1999 FCC ID: P5L-FWTG30 Industry Canada ID: 287X-FWTG30 COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 Page 5 of 25 COMMERCIAL-IN-CONFIDENCE 1.2 INTRODUCTION The information contained within this report is intended to show limited verification of compliance of the SGS Telecommunications Europe Ltd Fixed Wireless Terminal to the requirements of FCC Specification Parts 22 and 24 and Industry Canada Radio Specifications RSS-132 and RSS-133. Testing has been performed under the following site accreditations FCC Accreditation 90987 Octagon House, Fareham Test Laboratory. Industry Canada Accreditation IC5208 Octagon House, Fareham Test Laboratory FCC ID: P5L-FWTG30 Industry Canada ID: 287X-FWTG30 COMMERCIAL-IN-CONFIDENCE Doc Number 75900844 Report 01 Issue 1 Page 6 of 25 COMMERCIAL-IN-CONFIDENCE 1.2 INTRODUC…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: Ericsson Enterprise AB Fixed Wireless Terminal - G32a To: FCC Part 22: 2005 (Subpart H) and FCC Part 24: 2005 (Subpart E) Test Report Serial No: RFI/RPTE3/RP48122JD03A Supersedes Test Report Serial No: RFI/RPTE2/RP48122JD03A This Test Report Is Issued Under The Authority Of Andrew Brown, Operations Manager: Tested By: Steven Wong Checked By: Tony Henriques Report Copy No: PDF01 Issue Date: 12 July 2006 Test Dates: 28 April to 12 May & 10 July 2006 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may be copied in full. The results in this report apply only to the sample(s) tested. RFI GLOBAL SERVICES LTD TEST REPORT S.No. RFI/RPTE3/RP48122JD03A Page: 2 of 72 Issue Date: 12 July 2006 Test of: Ericsson Enterprise AB Fixed Wireless Terminal - G32a To: FCC Part 22: 2005 (Subpart H) and FCC Part 24: 2005 (Subpart E) This page has been left intentionally blank. RFI GLOBAL SERVICES LTD TEST REPORT S.No. RFI/RPTE3/RP48122JD03A Page: 3 of 72 Issue Date: 12 July 2006 Test of: Ericsson Enterprise AB Fixed Wireless Terminal - G32a To: FCC Part 22: 2005 (Subpart H) and FCC Part 24: 2005 (Subpart E) Table of Contents 1. Client Information .............................................................................................................................. 4 2. Equipment Under Test (EUT) ............................................................................................................ 5 3. Test Specification, Methods and Procedures ................................................................................. 8 4. Deviations from the Test Specification............................................................................................ 8 5. Operation of the EUT during Testing ............................................................................................... 9 6. Summary of Test Results .................................................................................................................. 10 7. Measurements, Examinations and Derived Results ....................................................................... 12 8. Measurement Uncertainty ................................................................................................................. 53 9. Measurement Methods ...................................................................................................................... 54 Appendix 1. Test Equipment Used ....................................................................................................... 67 Appendix 2. Test Configuration Drawings........................................................................................... 69 Test Report Serial No: RFI/RPTE3/RP48122JD03A Supersedes Test Report Serial No: RFI/RPTE2/RP48122JD03A RFI GLOBAL SERVICES LTD TEST REPORT S.No. RFI/RPTE3/RP48122JD03A Page: 4 of 72 Issue Date: 12 July 2006 Test of: Ericsson En…

Text truncated - open the document above for the full version.