P9M-STRATOTTLPhottix Strato TTL Flash Trigger Transmitter

Phottix Strato TTL Instructions Parts Transmitter 1.Power Switch 2.Test Button 3.USB Port 4.Shutter Button 5.Status LED 6.Lanyard Slot 7.LCD 8.EV -/+ Adjustment Buttons 9.Channel Selection Button 10.HSS / SCS Mode Button / Key Lock button 11.Battery Compartment 12.Hot Shoe Connector 13.Locking Ring Receiver 1.Power Switch 2.Channel Selection Switch 3.Test Button 4.USB Port 5.Shutter Button 6.Status LED 7.Lanyard Slot 8.Hot Shoe Port 9.Sync Cable Port 10.Shutter Cable Port 11.DC 5V Power Port 12.Battery Compartment 13.Cold Shoe / 1/4 x20 mount 14.Locking Ring The Transmitter LCD Battery Level Indicator EV Adjustment Level Channel HSS, SCS, Standard Mode Key Lock Mode Tip: Turn off all devices – flashes/strobes, cameras, and Phottix Strato TTL transmitters and receivers - when connecting and disconnecting devices. Compatibility The Strato TTL Transmitter is compatible with other Phottix triggers in the following manner: 1. The Strato TTL Transmitter will trigger Strato and Strato II Receivers and Atlas II Transceivers (in RX mode) set to the same channel. 2. The Strato TTL Transmitter will trigger Strato II receivers set to any group. All Strato II Receiver groups will fire if set to the same channel as the Strato TTL transmitter. 3. The Strato TTL Transmitter will not trigger Phottix Odin or Ares. 4. Phottix Odin TCU or Atlas II (in Tx mode) or Ares Transmitter will not trigger Strato TTL Receivers. 5. Using the Strato TTL Transmitter in HSS mode may cause issues with flash sync when using Strato and Strato II Multi receivers or Atlas II Transceivers (in RX mode). Inserting batteries 1. Press the battery cover in while pushing it away from the Strato TTL transmitter or receiver. The battery cover will snap open and slide away from the device. 2. Remove the battery cover from the Strato TTL. 3. Insert AA batteries. 4. Replace the battery cover and push back into the locked position. Battery Level Indicator When the battery voltage is higher than 2.4V, the battery level indicator icon will display four bars. As power in the batteries is depleted the bars displayed in the battery level indicator icon will disappear. When the batteries are exhausted the battery level indicator will display an empty with battery icon. LCD Backlight on the transmitter Pressing any button on the transmitter will illuminate the LCD Backlight for approximately 10 seconds. If no buttons on the transmitter are pressed, the backlight will go off. Auto-idle function The transmitter will enter Auto Idle Mode with “IDLE” displaying on the LCD after 30 minutes of inactivity. Key Lock Mode 1. Pressing and holding the HSS / SCS Mode Button / Key Lock button for 2 seconds will display a lock icon. Transmitter Buttons will be locked, pressing buttons will not make changes. 2. While in Key Lock Mode, pressing and holding the HSS / SCS Mode Button / Key Lock button for 2 seconds will unlock the transmitter and the lock icon will disappear. 1Dx mode The Strato TTL Trigger comes with a 1Dx mode for better compatibility with this model of camera. To Enable/Disable1Dx mode: 1. Press and hold the “EV+” and “"HI/SCS" buttons to enable 1Dx mode. 2. Press and hold the “EV+” and “"HI/SCS" buttons again to disable 1Dx mode. Please note： -When the 1Dx mode is enabled, the flash sync mode will not support Second Curtain Sync (SCS) functions. -If not using a 1Dx camera ensure this mode is disabled for best results. Turning transmitter and receiver on/off 1. To turn on the Phottix Strato TTL transmitter or receiver– move the power switch to the “ON” position. 2. To turn off the Phottix Strato TTL transmitter or receiver - move the power switch to the “OFF” position. Test Button 1. The Test Button will test fire flashes/strobes. 2. To Test: Press the transmitter Test Button. Flashes connected to Phottix Strato TTL receivers on the same channel will fire when the transmitter test button is pressed. 3. Pressing the receiver Test Button will test fire flashes or strobes connected to that receiver. For Wireless Shutter Release: See Using the Strato TTL as a wireless shutter release below Status LED 1. The Status LED on the Strato TTL transmitter will turn solid green upon a half-press of the shutter button (on camera or the Strato TTL transmitter being used as a wireless shutter release) and turn red when sending a signal or taking a photo. When idle, the Status LED will flash green once every 2 seconds. 2. The Status LED on the Strato TTL receiver will flash green once every 2 seconds while the power is on and idle. The LED will turn red when a signal is received from the transmitter and the connected flash or camera is fired. 3. When the battery level is low，the Status LED on the receiver will flash red once every 0.5 seconds. Channels 1. The Strato TTL System has 4 transmission channels: 1, 2, 3, 4. 2. Channels can be set on both the transmitter and receiver. Setting Channels on the Transmitter 1. Press the Channel Selection Button on the transmitter 2. Each press of the button will cycle through channels 1, 2, 3, 4 3. Make sure the transmitter channel is the same as the receivers 4. Channels are visible on the transmitter LCD Setting Channels on the Receiver 1. Move the Channel Selection Switch to settings 1, 2, 3, or 4 2. Make sure the receiver is set to the same channel as the transmitter. Connecting Strato TTL transmitter to the camera hot shoe 1. Turn off the camera and Strato TTL transmitter 2. Slide the Strato TTL transmitter into the camera’s hot shoe mount. 3. Turn the Strato TTL locking ring until tight. 4. Turn on the Strato TTL transmitter. 5. Turn on the camera and set the shooting mode. Connecting a flash to the Strato TTL receiver hot shoe 1. Turn off the flash and the Strato TTL Receiver. 2. Slide the flash into the receiver’s hot shoe mount. 3. Lock the flash with the flash’s locking mechanism. 4. Turn on the flash and the Strato TTL receiver. 5. Set the flash to ETTL mode. Please Note: It is not unusual for the flash to disc…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-1 9. PHOTOS OF THE EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-2 Figure 3 General Appearance of the EUT Figure 4 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-3 Figure 5 General Appearance of the EUT Figure 6 General Appearance of the EUT

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-4 Figure 7 Inside of the EUT Figure 8 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-5 Figure 9 Inside of the EUT Figure 10 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-6 Figure 11 Inside of the EUT Figure 12 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-7 Figure 13 Inside of the EUT Figure 14 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-8 Figure 15 Inside of the EUT Figure 16 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-9 Figure 17 Inside of the EUT Figure 18 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-10 Figure 19 Inside of the EUT Figure 20 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-11 Figure 21 Inside of the EUT Figure 22 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-12 Figure 23 Inside of the EUT Figure 24 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 9-13 Figure 25 Inside of the EUT

NO.Parts codeParts nameDescriptionsUnitQTYPosition 1 3.01.402-0001SMT resistor0402 0R ±1%PCS4.00R36,R52,L13,C125 2 3.01.402-1022SMT resistor0402 1KΩ ±1%PCS5.00R34,R35,R38,R39,R63 3 3.01.402-1032SMT resistor0402 10KΩ ±1%PCS17.00 R2,R9,R16,R17,R18,R19,R20 ,R21,R22,R23,R42,R43,R44, R45,R51,R61,R64 4 3.01.402-1042SMT resistor0402 100KΩ ±1%PCS5.00R1,R3,R5,R6,R7 5 3.01.402-1052SMT resistor0402 1MΩ ±1%PCS3.00R4,R8,R31 6 3.01.402-1232SMT resistor0402 12KΩ ±1%PCS1.00R47 7 3.01.402-2012SMT resistor0402 200Ω ±1%PCS3.00R37,R40,R62 8 3.01.402-2022SMT resistor0402 2KΩ ±1%PCS1.00R60 9 3.01.402-2042SMT resistor0402 200KΩ ±1%PCS1.00R65 10 3.01.402-2232SMT resistor0402 22KΩ ±1%PCS1.00R24 11 3.01.402-3001SMT resistor0402 30Ω ±1%PCS1.00R66 12 3.01.402-3313SMT resistor0402 330Ω ±1%PCS8.00R10,R11,R12,R13,R14,R15,R26,R27 13 3.01.402-3332SMT resistor0402 33KΩ ±1%PCS2.00R28,R29 14 3.01.402-4732SMT resistor0402 47KΩ ±1%PCS1.00R46 15 3.01.402-6822SMT resistor0402 6.8KΩ ±1%PCS2.00R48,R49 16 3.01.402-7522SMT resistor0402 7.5KΩ ±1%PCS1.00R30 17 3.02.003-2265SMT Tantalum capacitor22UF 6.3V A型/3216PCS1.00C19 18 3.02.003-4762SMT Tantalum capacitor47UF 6.3V ±20% B型/3528PCS3.00C32,C33,C34 19 3.02.402-0051SMT capacitor0402 50V 0.5PF ±0.1PF C0G(GRM1555C1HR50BA01D)PCS5.00C13,C113,C122,C124,C126 20 3.02.402-0101SMT capacitor0402 50V 1.0PF ±0.25PF C0G(GRM1555C1H1R0CA01D)PCS1.00C112 21 3.02.402-0151SMT capacitor0402 50V 1.5PF ±0.25PF C0G(GRM1555C1H1R5CA01D)PCS3.00C114,C115，C121 22 3.02.402-0201SMT capacitor0402 50V 2.0PF ±0.25PF C0G(GRM1555C1H2R0CA01D)PCS2.00C8，C116 23 3.02.402-0251SMT capacitor0402 50V 2.5PF ±0.25PF C0G(GRM1555C1H2R5CA01D)PCS1.00C123 24 3.02.402-1001SMT capacitor0402 50V 10PF ±5% C0G(GRM1555C1H100JA01D)PCS8.00 C1,C3,C5,C117,C119,C120,C 127,C128 25 3.02.402-1021SMT capacitor0402 50V 102 ±10% X7R(GRM155R71H102KA01D)PCS2.00C41,C35 26 3.02.402-1041SMT capacitor0402 16V 104 ±10% X7R(GRM155R71C104KA88D)PCS3.00C28,C29,C36 27 3.02.402-1501SMT capacitor0402 50V 15PF ±5% C0G(GRM1555C1H150JA01D)PCS3.00C20,C21,C25 28 3.02.402-1801SMT capacitor0402 50V 18PF ±5% C0G(GRM1555C1H180JA01D)PCS1.00C24 29 3.02.402-2221SMT capacitor0402 50V 222 ±10% X7R(GRM155R71H222KA01D)PCS2.00C39,C26 30 3.02.402-3331SMT capacitor0402 16V 333 ±10% X7R(GRM155R71C333KA01D)PCS1.00C6 31 3.02.402-4721SMT capacitor0402 50V 472 ±10% X7R(GRM155R71H472KA01D)PCS1.00C27 32 3.02.603-1055SMT capacitor0603 16V 105 -20%+80% Y5VPCS11.00 C2,C4,C37,C38,C45,C46,C47 ,C48,C129,C130,C132 33 3.02.805-1061SMT capacitor0805 10V 10UF -20+80% Y5VPCS3.00C16,C17,C18 34 3.03.002-0001SwitchPT-020-040PCS1.00SW5 35 3.03.008-0003SwitchTSHW-3VSLPCS1.00SW6 36 3.04.001-0093ICPIC18F87J50 TQFP80 FDT11TAPCS1.00U1 38 3.04.002-0025ICXC6206P302MR SOT-23 3.0VPCS1.00U5 39 3.04.002-0034ICNRF24L01P QLP20PCS1.00U2 40 3.04.002-0058ICLMV339IPWR TSS0P-14PCS1.00U6 41 3.04.002-0069ICXC6206P252MR SOT-23 2.5VPCS1.00U4 42 3.04.003-0002DC regulator ICXC9111A331MR SOT-23PCS1.00U7 43 3.05.001-0003SMT diode1206 IN5819 SMD SOD-123PCS4.00D3,D4,D5,D8 44 3.06.003-0002SMT transistor2SC5508-T2-AFB SOT-343PCS1.00Q1 45 3.10.002-0006SMT crystal8.000MHZ，±20ppm 20PF 5032PCS1.00X1 46 3.10.002-0010SMT crystal16.000Mhz，±10ppm 9PF XS-3225 （MP16000C014）PCS1.00X2 47 3.11.001-0013ConnectorFPC0.5mm 20P SMT height 2.5mmPCS1.00J20 48 3.12.003-0008LED0805 red/green two colurPCS1.00LED1 49 3.13.005-0001USB connectorUSB-015（G）PCS1.00J1 50 3.14.003-0040FKT05ZP PCBFR4,1.0mm thick 78mm*41mmPCS1.00 51 3.16.004-1041SMT inductance100UH 0.52A ±20% （SWPA4020S101MT）PCS1.00L6 52 3.16.402-0151SMT inductance0402 1.5NH ±0.3NH(LQG15HS1N5S02)PCS1.00L14 53 3.16.402-0201SMT inductance0402 2.0NH ±0.3NH(LQG15HS2N0S02)PCS1.00L12 54 3.16.402-0221SMT inductance0402 2.2NH ±0.3NH(LQG15HS2N2S02)PCS1.00L2 55 3.16.402-0471SMT inductance0402 4.7NH ±0.3NH(LQG15HS4N7S02)PCS1.00L1 56 3.16.402-0621SMT inductance0402 6.2NH ±0.3NH(LQG15HS6N2S02)PCS1.00L15 57 3.16.402-0821SMT inductance0402 8.2NH ±5%(LQG15HS8N2J02)PCS1.00L5 58 3.16.402-3911SMT inductance0402 39NH ±5%(LQG15HS39NJ02)PCS1.00L3 59 3.21.004-0004FKC05ZA-6Pin connector中心间距1.25mm,卧式贴片 6PinPCS1.00J6 60 3.21.005-0003FDN13TA-5Pin connectorPin to pin center 1.00mm,5PIN,horizontal typePCS1.00J2 61 3.22.004-0008SMT MOS transistorXP151A13AOMR-G SOT-23PCS2.00Q2,Q3 62 3.22.013-0003Voltage detectorXC61CC2702MR-G SOT-23PCS1.00U3 63 3.03.008-0004SMT switchSKRPABE010 ALPS switchPCS4.00SW2,SW3,SW4,SW7 64 3.14.005-0009FKT05ZP-LCD pcbFR4, 1.6mm thick，40mm*25mm，FKT05ZP-LCD-A0PCS1.00 65 3.21.005-0003FDN13TA-5Pin connectorPin to pin center 1.00mm，5PIN，horizontal typePCS1.00J5 Strato TTL Transmitter BOM_ELE 编制： 审核： 核准： 第 1 页，共 1 页

Product Name：Phottix Strato TTL Flash Trigger Transmitter Model Number: Strato TTL Transmitter FCCID: P9M-STRATOTTL RADIO FRREQUENCY EXPOSURE COMPLIANCE RESULT : PASS Test standard : FCC KDB Publication 447498 D01 V05 Since maximum peak output power of the transmitter is<10mW, i.e.0.009346mW<10mW, hence the EUT is exclueded from SAR evaluation according to FCC KDB Publication 447498 D01:General RF Exposure Guidance V05.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 1-1 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Phottix (HK) Ltd. Phottix Strato TTL Flash Trigger Transmitter Model No. : Strato TTL Transmitter FCC ID: P9M-STRATOTTL Prepared for : Phottix (HK) Ltd. 10/F Block A, Yip Fat Factory Building, Phase l, 77 Hoi Yuen Rd, Kwun Tong, Kln, Hong Kong Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ： ACS-F13258 Date of Test ： Aug.29~31, 2013 Date of Report ： Sep.13, 2013 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 1-2 TABLE OF CONTENTS Description Page 1. SUMMARY OF STANDARDS AND RESULTS ......................................................... 1-1 1.1. Description of Standards and Results ...................................................................................1-1 2. GENERAL INFORMATION ......................................................................................... 2-1 2.1. Description of Device (EUT) ...............................................................................................2-1 2.2. Tested Supporting System Details........................................................................................2-2 2.3. Block Diagram of Test Setup ...............................................................................................2-2 2.4. Test Facility ..........................................................................................................................2-3 2.5. Measurement Uncertainty (95% confidence levels, k=2).....................................................2-3 3. POWER LINE CONDUCTED EMISSION TEST....................................................... 3-1 4. RADIATED EMISSION TEST ...................................................................................... 4-1 4.1. Test Equipment.....................................................................................................................4-1 4.2. Block Diagram of Test Setup ...............................................................................................4-2 4.3. Radiated Emission Limit ......................................................................................................4-3 4.4. EUT Configuration on Test ..................................................................................................4-3 4.5. Operating Condition of EUT ................................................................................................4-3 4.6. Test Procedure ......................................................................................................................4-3 4.7. Radiated Emission Test Results ...........................................................................................4-4 5. BAND EDGE COMPLIANCE TEST............................................................................ 5-1 5.1. Test Equipment.....................................................................................................................5-1 5.2. Limit .....................................................................................................................................5-1 5.3. Test Produce .........................................................................................................................5-1 6. 20 DB BANDWIDTH TEST ........................................................................................... 6-1 6.1. Test Equipment.....................................................................................................................6-1 6.2. Limit .....................................................................................................................................6-1 6.3. Test Results ..........................................................................................................................6-1 7. DEVIATION TO TEST SPECIFICATIONS ............................................................... 7-1 8. PHOTOGRAPH OF TEST............................................................................................. 8-1 8.1. Photos of Radiated Emission Test ........................................................................................8-1 9. PHOTOS OF THE EUT ................................................................................................. 9-1 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 1-1 1. SUMMARY OF STANDARDS AND RESULTS 1.1. Description of Standards and Results The EUT have been tested according to the applicable standards as referenced below. EMISSION Description of Test Item Standard Results Power Line Conducted Emission Test FCC Part 15C: 15.207 ANSI C63.10-2009 N/A Radiated Emission Test FCC Part 15C: 15.209 FCC Part 15C: 15.249 ANSI C63.10-2009 PASS Band Edge Compliance Test FCC Part 15: 15.249 ANSI C63.10-2009 PASS 20dB Bandwidth Test FCC Part 15: 15.215 ANSI C63.10-2009 PASS R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 2-1 2. GENERAL INFORMATION 2.1. Description of Device (EUT) Product Name : Phottix Strato TTL Flash Trigger Transmitter Model Number : Strato TTL Transmitter FCC ID : P9M-STRATOTTL Operation Frequency : 2456MHz-2464MHz Modulation Technology : GFSK Antenna Assembly Gain : Integrated PCB antenna, 3dBi gain Power Supply : DC 3V Applicant : Phottix (HK) Ltd. 10/F Block A, Yip Fat Factory Building, Phase l, 77 Hoi Yuen Rd, Kwun Tong, Kln, Hong Kong Manufacturer : Phottix (HK) Ltd. 10/F Block A, Yip Fat Factory Building, Phase l, 77 Hoi Yuen Rd, Kwun Tong, Kln, Hong Kong Factory : Shenzhen Fudasi Technology Co., Ltd B Building, Shengda Industrial Park, Da…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 8-1 8. PHOTOGRAPH OF TEST 8.1. Photos of Radiated Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:P9M-STRATOTTL page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13258 8-2 (Above 1000MHz)