PGCAD-1130ADSL Modem with USB Interface

EXHIBIT C User Manual Installation Guide For UAT ADSL USB Modem 1 ADSL USB NIC User Manual Revision 1.0 01-10-2001 This document contains confidential information and is proprietary to UAT Inc. No part of this document may be reproduced in any form or by any means without the prior permission of UAT Inc. All specifications are subject to change without notice. UAT Inc. 2F, No.5, Alley22, Lane 513, Jui Kuang Rd, Nei Hu, Taipei Taiwan, R.O.C Tel: (886) 2 8797 8488 Fax: (886) 2 2657 0997 Installation Guide For UAT ADSL USB Modem 2 Welcome to ADI USB ADSL Modem! Introduce yourself to the new world of fast Internet. ADI provides a whole new fast and simple plug-n-play Universal Serial Bus (USB) Windows environment for Internet access. The ADI ADSL USB Modem contains a complete evaluation package including hardware reference design, Windows software drivers, test/utility software, design documents, performance reports and this user manual. The manual is written based on the ADI ADSL USB Modem hardware release Version 3.1.3, the software release Version Alpha01 and the ADIMON GUI Version 2.5. The ADI ADSL USB Modem features: ??Plug and Play USB 1.1 specification interface ??Rate Adaptive ADSL technology that adapts to your phone line conditions ??Receive line rate up to 10Mbps (downstream) and transmit line rate up to 1Mbps (upstream) System Requirements To use the USB Modem, your PC or notebook should have: ??Pentium 233MHz CPU or faster ??32MB system memory or more ??3MB free space on your hard drive ??256 color VGA or higher resolution ??Microsoft Windows 98 or Windows 98 Second Edition CD-ROM ??Floppy drive and CD-ROM drive ??One available USB port and one USB cable ??RJ11 phone wire ??DSLAM or central office modem ready The shielded USB cable is to be used in order to ensure compliance with FCC Part 15, and it is the responsibility of the user to provide and use shielded USB cable from modem to personal computer. CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. Document Annotations Important Instruction Special Note Installation Guide For UAT ADSL USB Modem 3 Hardware Installation Familiarizing yourself with your USB ADSL Modem Your modem has one RJ-11 phone jack and USB cable jack receptacle for data connection. POTS splitters or microfilters can be required to work concurrently with conventional POTS equipment such as phone, fax and V.90 modem. Various LEDs display modem status. Installing the ADSL USB modem To install the modem: 1. Turn on your computer and run Windows 98. 2. Plug USB cable from main computer to modem. 3. Connect your modem using standard phone wire and plug the other side of the wire to your house phone jack which is connected to central office modem provided by service provider. 4. Windows USB plug-n-play feature should automatically recognize the modem and ask for software installation. Installation Guide For UAT ADSL USB Modem 4 Driver Install To install the drivers for Windows 98, plug the modem to system using USB cable before power up the PC or after Windows is running: 1. Windows 98 PnP detects the USB modem USB devices. Click on “Next” from below screen. 2. Let Windows 98 search for the best driver. Installation Guide For UAT ADSL USB Modem 5 3. Select floppy disk or CD-ROM (recommended) which contain “E:/ driver/USB/00-12-20/ cpe sw ndis sw ndis usb alpha01 for Windows 98 to install the USB firmware loader. Click on “Next” to continue. 4. Windows 98 detects the ADI USB firmware loader. Click on “Next” to continue. 5. Click on “Finish”. ADI firmware is being loaded into the system. Installation Guide For UAT ADSL USB Modem 6 6. Click on “Yes” to restart the PC. 7. Next is to install the ADI USB modem device driver “ADIUSBAE” into the system. Windows 98 PnP automatically detects the modem and click “Next” to continue. 8. Let Windows 98 search for the proper device driver. Installation Guide For UAT ADSL USB Modem 7 9. Select floppy disk or CD-ROM(recommended) which contains “ADIUSBAE.SYS” and “ADIUSBAE.INF” for Windows 98 to install the USB device driver. Click on “Next” to continue. 10. Follow the installation dialogs to install the driver. Installation Guide For UAT ADSL USB Modem 8 11. Now restart the computer as the system asks. Note: Unplug the USB cable and do not plug it back until system finishes running Windows. Otherwise, unexpected crash might be occurred. Installation Guide For UAT ADSL USB Modem 9 ADIMON USB User Interface GUI Setting Up After the PC being restarted, please go to the Start Menu->Program-> Windows Explorer->[E:]->Driver->USB->00-12-20-> cpe sw ndis usb alpha01, for ADIMON USB User Interface setting up. Installation Guide For UAT ADSL USB Modem 10 Changing USB driver parameters To verify the modem is properly installed, open “Control Panel” and click on “System” icon. In the “Device Manager” window you should see the “ADI USB ADSL Modem” in the “Network adapters” list entry. Check USB modem “Properties” to see whether modem is successfully installed. 1. Without unplug the USB modem, open “Control Panel” then select “Network” panel. 2. Select “ADI USB ADSL modem” then click on “Properties”. Installation Guide For UAT ADSL USB Modem 11 3. Click on “Advanced” tab. and change desired driver parameters from the following windows: Click on “OK” and back to the Network window to change the TCP/IP Net work Settings. Changing the TCP/IP Network Settings Click on the “Network” icon to display the network status. Highlight “TCP/IP ->ADI USB ADSL Modem” and click on “Properties”. Obtain all the TCP/IP setup information from your network administrators in order to configure the TCP/IP protocol. If DHCP server is not available from the CO side, enter the IP address and subnet mask. Also enter the DNS and Gateway information when necessary. Installation Guide For UAT ADSL USB Modem 12 After the IP address being set, please go to Network->ADI USBADSL lo…

Text truncated - open the document above for the full version.

EXHIBIT E Block Diagram A A B B C C D D E E 44 33 22 11 EZ USB FX Controller XCS20XL IDMA/UTOPIA to 8051 BUS AD 6449 DMT Processor AD 6440 Analog Front End AD 8018 ADSL Line Hybrid Circuit, Drivers & Filters UTOPIA IDMA USB 1.1 Full Speed Interface VCXO 35.328MHz XTAL 12MHz <Doc>A ADSL DMT USB 3.1.3A A4 010Wednesday, January 10, 2001 Title SizeDocument NumberRev Date:Sheet of

RE: UAT Inc., FCC ID:PGCAD-1130, AN01T1207From: trc168 [[email protected]] Sent: Wednesday, March 28, 2001 11:41 PM To: Mike Kuo Subject: Re: UAT Inc., FCC ID:PGCAD-1130, AN01T1207 Dear Mike Kuo : Anser #1:The test report has been modified as the attachmant(u1215628B.PDF). Anser #2:The user manual has been modified as the attachmant(u1215628C.PDF) Thank you very much! ----- Original Message ----- From: Mike Kuo To: [email protected] Cc: Mike Kuo Sent: Friday, March 16, 2001 8:15 AM Subject: RE: UAT Inc., FCC ID:PGCAD-1130, AN01T1207 -----Original Message----- From: certadm [mailto:[email protected]] Sent: None To: [email protected] Cc: [email protected] Subject: UAT Inc., FCC ID:PGCAD-1130, AN01T1207 Notice_content ------------- Question #1: The host computer ( HP) used during the final tests does not have FCC ID number associated. If the host computer is using FCC DoC proced ure, please indicate "FCC ID:N/A, DoC Label" on the test report. Pleas e make necessary correction and provide revised test report. Questi on #2: User Manual does not contain the information required under FCC 15.21, 15.27, and 15.105 (b) of FCC rules. Please provide revised user manual to contain such information. The items indicated above must be submitted before processing can continue on the above referenced applic ation. Failure to provide the requested information within 60 days of t he original e-mail date may result in application dismissal and forfeit ure of the filing fee. Also, please note that partial responses increas e processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

List of Exhibit EXHIBIT A Sample Label EXHIBIT B Test Report EXHIBIT C User Manual EXHIBIT D Circuit Diagram EXHIBIT E Block Diagram EXHIBIT F Photographs of EUT EXHIBIT A Sample Label LABEL Format: This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID : PGCAD-1130 Model No.: AD-1130 LABEL Size: 45 X30 mm LABEL Position: LABEL

EXHIBIT B Test Report Test Report --------------------------------------------------------------------------- 2/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Contents Chapter 1 Introduction Description of EUT.....................................................................................................................3 Configuration of Test Setup.........................................................................................................4 List of Support Equipment...........................................................................................................5 Chapter 2 Conducted Emission Test Test Condition and Setup............................................................................................................7 Conducted Test Placement..........................................................................................................8 Chapter 3 Radiated Emission Test Test Condition and Setup............................................................................................................9 Radiated Test Placement............................................................................................................10 Appendix A : Conducted test result..................................................................................................................11 Appendix B : Radiated test result.....................................................................................................................12 Test Report --------------------------------------------------------------------------- 3/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Chapter 1 Introduction Description of EUT: The EUT contains a complete evaluation package including hardware reference design, Windows software drivers, test/utility software, design documents. The ADI ADSL USB Modem features: • Plug and Play USB 1.1 specification interface • Rate Adaptive ADSL technology that adapts to your phone line conditions • Receive line rate up to 10Mbps (downstream) and transmit line rate up to 1Mbps(upstream). Test method: The applicant provides the testing program. Pretest was found that the emission of operating mode is worse than standby mode. So, The final test is made at the operating mode. During the pretest, the following mode was “link” mode that was the worst case. The test placement as the photographs showed is the worst case emission placed. (If the emission is close to the ambient, the resolution BW and view resolution will be reduced and the data will be recorded by detection of maximum hold peak mode.) The testing configuration of test setup is showing in the next page. Test Report --------------------------------------------------------------------------- 4/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Configuration of test setup To Far-end PABX Connections: PC: *Power port --- via a 185cm long, non-shield, no ferrite bead, power cable to the AC power source. *Serial port --- via a 76cm shielded RS-232 cable to an external modem. *Printer port --- a printer with 1.80m length data cable. *Monitor port --- a monitor with 1.80m long of data cable. *Keyboard port --- a keyboard with 1.50m length data cable. *Mouse port --- a mouse with 1.50m length data cable. *USB port A --- a joystick with 1.50m long, shielded and no ferrite bead data cable. *USB port B --- to EUT. (Each port on PC is connected with suitable device) EUT: *USB port --- via a 1.50m long, shielded and no ferrite bead data cable to the USB port B of PC. *Line port -- via a 30m long, non-shielded, no ferrite core, RJ11 cable to the line jack of Far-end PABX. Power souse USB Joystick Mouse keyboard Monitor PC modem Printer EUT Test Report --------------------------------------------------------------------------- 5/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 List of support equipment Conducted test: PC : HP Brio 85xx 6/350 Model No. : D6928A Serial No. : SG91801432 FCC ID : N/A : 3872H013 Power type : 100 ~ 230VAC / 50 ~ 60Hz, 5A, Switching Power cord : Non-shielded, 2.33m long, Plastic, No ferrite core Monitor : HP Model No. : D2821 Serial No. : TW 73512262 FCC ID : A3KMO64 Power type : AC 110~120 / 220~240 VAC, Switching Power cord : Non-Shielded, 3m long, no ferrite core Data cable : Shielded, 1.8m long, with ferrite core Keyboard : Digital Model No. : KB-5923 Serial No. : 9S74904837 FCC ID : E8HKB-5923 Power type : By PC Data cable : Shielded, 1.8m long, with ferrite core Mouse : HP Model No. : M-S34 Serial No. : LZB90714106 FCC ID : DZL211029 : 4862A011 Power type : By PC Power cord : Non-shielded, 1.88m long, No ferrite core Test Report --------------------------------------------------------------------------- 6/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Modem : ACEEX Model No. : XDM-9624 FCC ID : IFAXDM-9624 Power type : 220VAC, 50Hz / 9VAC, 1A Power cord : Non-shielded, 1.9m long, No ferrite cord Data cable : RS232, Shielded, 1.2m long, No ferrite core RJ11C x 2, 7’ long non-shielded, No ferrite core Printer : HP Model No. : C2642A Serial No. : SG69A196GV FCC ID : B94C2642X Power type : 220VAC, 50Hz Power cord : Non-shielded, 2m long, no ferrite core Data cable : Shielded, 1.84m long, no ferrite core (1.7m) USB Joystick : Padix Model No. : QF-606U, QF-707U Serial No. : N/A, 8100848 FCC ID : N/A, Doc Approval Power type : Powered by PC Power Cable : Shielded, 1.5M long, No ferrite bead data cable Joystick : Logitech Model No. : G-YA ARC2 (Doc Approval) Power type : Powered by PC Power Cable : Shielded. 3M long, No ferrite bead data cable PABX : King Design Model No. : KD8705-A Serial No. : GV101101186 Power type : 220 VAC 50Hz Power cord : non-shielded, 1.8m long, no ferrite bead Test Report --------------------------------------------…

Text truncated - open the document above for the full version.

Test Report --------------------------------------------------------------------------- 8/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Conducted Test Placement: (Photographs) Test Report --------------------------------------------------------------------------- 10/13 Report No.: U1215628 Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778 Radiated Test Placement: (Photographs)