PKTNODEBAFBNode B Base Station

V5 Node B Installation Guide Version 1.0.5 Page 1 of 44 V5 Node B Installation Guide V5 Node B Installation Guide Version 1.0.5 Page 2 of 44 Information in this document and the products described are subject to change without notice. ©2000-2007 IPWireless, Inc. All rights reserved. Reproduction, alteration, or distribution in any manner whatsoever without the written permission of IPWireless Inc, is strictly forbidden. Trademarks used in this text: the IPWireless logo, icon and IPWireless Broadband Modem are trademarks of IPWireless, Inc.; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products, IPWireless, Inc., disclaims any proprietary interest in trademarks and trade names other than its own. August 2007 Part No. IPW-1442 V5 Node B Installation Guide Version 1.0.5 Page 3 of 44 WEEE Compliance In compliance with the requirements for marking electrical and electronic equipment as directed in article 11 (2) of Directive 2002/96/EC, Waste from Electrical and Electronic Equipment (WEEE), IPWireless applies a crossed-out bin symbol to all Node B products. The mark signifies that the IPWireless equipment is to be reprocessed or recycled using IPWireless authorized recyclers and processes. This minimizes the disposal of unsorted municipal waste, achieves a high level of separate collection of WEEE, and ensures the environmentally sound disposal of electrical and electronic equipment placed on the market after 13 August 2005. To dispose of equipment marked with the WEEE symbol, IPWireless has contracted with certified companies that can reprocess this equipment per European Union requirements. To find out further information regarding disposal of IPWireless equipment within the EU visit the IPWireless web site, ipwireless.com, or contact your IPWireless representative. V5 Node B Installation Guide Version 1.0.5 Page 4 of 44 Contents 1. Release Version ..................................................................................... 6 2. Safety Precautions ................................................................................ 7 3. General Warnings .................................................................................. 7 4. Overview ................................................................................................. 9 5. General Specifications ........................................................................ 10 6. Installation ............................................................................................ 15 Step 1 Pre-Installation ........................................................................................ 15 Step 2 Parts Shipped & Tools Required ........................................................... 16 Step 3 Site Preparations for Node B Installation ............................................. 20 Step 4 Mounting Installations ............................................................................ 24 Step 5 Ground Installation ................................................................................. 27 Step 6 DC Power Connection-Control Shelf .................................................... 28 Step 7 DC Power Connection-Radio Equipment Shelf .................................... 29 Step 8 Inter-Shelf Connections ......................................................................... 30 Step 9 Backhaul Connections (Iub) to INC ....................................................... 32 Step 9 Backhaul Connections (Iub) to INC ....................................................... 32 Step 10 Antenna Cabling - Installation ............................................................. 35 Step 11 Alarm Connections ............................................................................... 36 Step 12 GPS Installation & Operation ............................................................... 38 Step 13 TTLNA Interfaces .................................................................................. 40 7. APPENDIX ............................................................................................ 41 Appendix A - Installation Check Card ............................................................... 41 Appendix B – Glossary ...................................................................................... 42 V5 Node B Installation Guide Version 1.0.5 Page 5 of 44 Tables Table 2-1 : Safety Symbols ................................................................................................... 7 Table 5-1 : Specifications ................................................................................................... 10 Table 5-2 : Node B Model Types ........................................................................................ 12 Table 6-1 : Control Shelf - Packing List ............................................................................. 17 Table 6-2 : Radio Equipment Shelf - Packing List ............................................................ 18 Table 6-3 : Tools Required .................................................................................................. 19 Table 6-4 : Materials Required ............................................................................................ 19 Table 6-5 : Site Preparation Checklist ............................................................................... 20 Table 6-6 : Ethernet Pin-outs using RJ45 ......................................................................... 33 Table 6-7 : T1/E1 Pin-outs (RJ48C) .................................................................................... 34 Table 6-8 : Alarm Inputs & Outputs ................................................................................... 37 Figures Figure 5-1 : Node B Rack Mount – Control Shelf Physical Dimensions ........................ 11 Figure 5-2 : Node…

Text truncated - open the document above for the full version.

Unit 7 Greenways Business Park Bellinger Close Chippenham Wiltshire SN15 1BN Telephone: 01249 800100 Facsimile: 01249 800101 IPWireless U.K. Ltd Registered Office as above Reg. No: 4218312 VAT No: 771 3836 15 9 th December 2009 RFI Global Services Ltd Pavillion A Ashwood Business Park Basingstoke Hampshire RG23 8BG RE: IPWireless V5 Node B FCCID: PKTNODEBAFB operation using single chip 3.84Mcps To Whom It May Concern, This letter is to confirm that the exhibits provided as part of FCC certification application for FCCID: PKTNODEBAFB cover operation of the equipment using 2 alternate chip rates of 3.84Mcps or 7.68Mcps. The test sample provided for FCC certification was evaluated using the lower chip rate 3.84Mcps as this chip rate will only be used for this equipment when operational in North America. Yours Faithfully, Peter Warburg Technical Associate IPWireless UK Ltd.

RFI Global Services Ltd Pavilion A, Ashwood Park, Ashwood Way, Basingstoke, Hampshire, RG23 8BG Tel: +44 (0) 1256 312000 Fax: +44 (0) 1256 312001 Email: [email protected] Website: www.rfi-global.com Registered in England and Wales Company number: 2117901 29 January 2010 Reason for Exhibit Supersede – PKTNODEBAFB The following exhibits were superseded due to an incorrect safe operating distance having been stated for the equipment. The incorrect stated distance was 2.83 metres which has now been corrected to 4.06 metres in accordance with the updated MPE calculation. Exhibits superseded: MPE Calculation Installation Guide These superseded exhibits were available to view in the grant listing for less than half a day. RFI Global Services TCB

IPWireless V5C Digital Shelf Model: VT External Photographs Figure 1: Front of Digital Shelf Figure 2: Right Side of Digital Shelf Figure 3: Rear of Digital Shelf Figure 4: Left Side of Digital Shelf

IPWireless 700MHz V5 Radio Shelf Model: AFB External Photographs Figure 1: Front of Radio Shelf Figure 2: Right Side of Radio Shelf Figure 3: Rear of Radio Shelf Figure 4: Left Side of Radio Shelf

IPWireless V5C Digital Shelf Model: VT Internal Photographs Figure 1: Control Card – Top Figure 2: Control Card – GPS & Memory Removed Figure 3: Control Card ‐ Bottom Figure 4: Sector Card Top Figure 5: Sector Card ‐ Bottom Figure 6: GPS & Memory Modules ‐ Top Figure 7: GPS & Memory Modules ‐ Bottom Figure 8: Power Supply Assembly Figure 9: Power Supply Figure 10: Blanking Panel ‐ Top Figure 11: Blanking Panel ‐ Bottom

IPWireless 700MHz V5 Radio Shelf Model: AFD Internal Photographs Figure 1: Radio Shelf – Front Panel Removed Figure 2: Radio Shelf – Top Cover Removed Figure 3: Radio Shelf – Bottom Filter Tray Removed Figure 4: RF Filter Tray Figure 5: 28VDC Power Supply Figure 6: 12VDC Power Supply Figure 7: RF Power Amplifier – Lid Removed Figure 8: RF Patch Card – Top Figure 9: RF Patch Card – Bottom Figure 10: Radio Card with Clamshell Figure 11: Radio Card ‐ Top Figure 12: Radio Card‐ Bottom

Data sheet © 1999‐2008 IPWireless, Inc. All rights reserved. <xxxxxxxx> IPWireless UMTS TD‐CDMA V5 Node B™ Base Station Features and Benefits Modular Architecture: The IPWireless V5 Node B™ is a modular architecture supporting one to three sectors of cellular deployment. The digital shelf consists of one control card , up to three sector cards and an optional Universal Gateway Card. Each sector card controls one radio shelf. The radio shelf can be located close to the antenna or up to 500 meters from the digital shelf using a CPRI fiber interface, eliminating the RF cable loss. Individual sector cards and radio shelves are field replaceable without affecting other sectors in the NodeB. Large Coverage: The radio shelf contains two complete transmit/receive chains for both downlink transmit diversity and uplink receive diversity for increased radio coverage. The dual RF chains support Multiple Input Multiple Output (MIMO) for increased throughput capacity. Transmit power up to 40 dBm (10 Watts) per transmit port provides wide area coverage. High Data Throughput: The V5 Node B provides sector peak throughput up to 28 Mbps on the downlink and 8 Mbps on the uplink for 10 MHz TDD; and 21 Mbps on the downlink and 9 Mbps on the uplink for 5+5 MHz FDD. For TDD operation, the time slot split can be adjusted to match the operator’s network traffic profile. Adaptive modulation and coding are used to match the data throughput with the channel condition, with the aim of delivering the highest data throughput to the end users. Remote Management: The operator can remotely configure the Node B, including the upgrade of firmware and software via a web browser based Element Manager (EM). The EM also supports performance monitoring and fault management which reports alarms and events. Interference Mitigation: Adjacent cell interference limits cellular network performance at the cell overlap areas. The V5 Node B implements advanced Intercell Interference Mitigation (IIM) techniques, using advanced signal processing to cancel interference to increase cell coverage and data throughput. IIM makes an N=1 frequency reuse system behave like an N=3 without adding frequency assets, greatly increasing the system spectral efficiency and cell‐edge capacity. Frequency and Bandwidth Agile: The V5 Node B operates in both 5 MHz and 10 MHz carriers on the same hardware platform. Selection of carrier bandwidth is done by a Data sheet simple configuration change in the Element Manager. Operators who have access to larger bandwidth can use wider carrier to deliver double data throughput without adding NodeB equipment. Both FDD and TDD radio shelves are available. The radio shelf is tunable across the supported frequency range. Channel filters may be added for operators who demand more stringent radio emission specifications than the standard requirements. Field Upgradable: The V5 NodeB is field upgradable to support future wireless standards including 3GPP Long Term Evolution (LTE). The digital shelf contains a spare slot for an optional Universal Gateway Card, allowing the NodeB to connect directly to an IP core network. © 1999‐2009 IPWireless, Inc. All rights reserved. <xxxxxxxx> Data sheet Specifications IPWireless V5 Digital Shelf Specifications Approvals CE approval for EMC. CSA, UL and CB approval for safety Backhaul facility 100/1000BaseT Ethernet. Optional upgrade to 8x E1 LMT Interface 10/100BaseT Ethernet Alarm Interfaces 2 Alarm Outputs, 5 Alarm Inputs Radio Unit Interface Baseband Analog and/or CPRI optical fiber Connectors LC Duplex ‐ MMF 50/125um ≤ 500m 65/125um ≤ 300m Universal Gateway Card (Optional) Core network interface: 2x 100/1000BaseT Ethernet Up to 220 Mbps combined uplink and downlink throughput Individual license keys for up to 6 sectors Ambient Temp Range ‐20 to +55 °C (‐4 to +131 °F) Environmental SpecificationETS300‐019 Class 3.1E Size – include front brackets 19” rack mount (4U) ‐H 180 mm x W 485 mm x D 310mm Weight 13 kg (maximum) Power consumption 200 Watts maximum Voltage / Current DC ‐48 Volts nominal, 4A maximum GPS Interface GPS –50 Ohm nominal, Type N Female Upgradeability Software and Firmware upgradeable from Element Manager © 1999‐2009 IPWireless, Inc. All rights reserved. <xxxxxxxx> Data sheet IPWireless V5 RF Shelf Specifications Approvals CE approval for EMC. CSA, UL and CB approval for safety RF Power Output +40dBm (+/‐1dB) per antenna port AWGN Receive Sensitivity (with receive diversity) ‐115dBm (+/‐2dB) / code for 7.68Mcps ‐118dBm (+/‐ 2dB) / code for 3.84Mcps Antenna Connector Type Connector 1 –Main Tx/Rx, 50‐ohm nominal 7/16 DIN Connector 2 – Diversity Tx/Rx 50‐ohm nominal 7/16 DIN Frequency range (Select on order) 1900 –1920 MHz TDD 2010 – 2025 MHz TDD 2053 – 2082 MHz TDD 2496 – 2690 MHz TDD 872 – 876 MHz Rx / 917 – 921 MHz Tx FDD (8U) 698 – 716 MHz Rx / 728 – 746 MHz Tx FDD 776 – 798 MHz Rx / 746 – 768 MHz Tx FDD Bandwidth 5 or 10 MHz TDD OR 5 + 5MHz or 10+10 MHz FDD Duplex Method TDD or FDD Ambient Temp Range ‐20 to +55 °C (‐4 to +131 °F) Environmental SpecificationETS300‐019 Class 3.1E Size – include front brackets 19” rack mount (5U) ‐H 222 mm x W 485 mm x D 380mm 19” rack mount (8U) ‐ H 356 mm x W 485 mm x D 380 mm for 872 MHz Weight 25 kg (maximum) 30 kg (maximum) for 872 MHz Power consumption 450 Watts (typical) 600 Watts (maximum) Voltage DC ‐48 Volts nominal, 12.5A maximum Upgradeability Software and Firmware upgradeable from Element Manager © 1999‐2009 IPWireless, Inc. All rights reserved. <xxxxxxxx> Data sheet © 1999‐2009 IPWireless, Inc. All rights reserved. <xxxxxxxx> Ordering Information To place an order, please contact IPWireless regional sales. Americas – [email protected] EMEA – [email protected] Asia Pacific – [email protected] About IPWireless IPWireless broadens the horizon of 3GPP, the world’s preeminent mobile standard, to support a range of compelling new applications and untapped global spectrum bands. With its complete end-to-en…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: IPWireless 700 MHz V5 Node B Model: AFB/VT To: FCC Part 27: 2008 Subpart C Test Report Serial No: RFI/RPT4/RP75336JD01A Version 4 supersedes all previous versions This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: Checked By: Nigel Davison Signature: Date of Issue: 28 January 2010 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 Page 2 of 105 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 3 of 105 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 7 4. Operation and Monitoring of the EUT during Testing ............................................................. 10 5. Measurements, Examinations and Derived Results ................................................................ 11 6. Measurement Uncertainty ........................................................................................................ 104 Appendix 1. Test Equipment Used .............................................................................................. 105 TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 Page 4 of 105 RFI Global Services Ltd 1. Customer Information Company Name: IPWireless (UK) Ltd Address: Unit 7 Greenways Business Park Bellinger Close Chippenham Wiltshire SN15 1BN England United Kingdom TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 5 of 105 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR27 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 27 Subpart C (Miscellaneous Wireless Communication Services) Site Registration: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 29 September 2009 to 19 November 2009 2.2. Summary of Test Results (Sub Band A, B & C) FCC Reference (47CFR) Measurement Port Type Result FCC Part 2.1046 FCC Part 27.50 Transmitter Carrier Output Power and Effective Radiated Power (ERP) Antenna Terminals FCC Part 2.1049 Transmitter Occupied Bandwidth Antenna Terminals FCC Part 2.1055 FCC Part 27.54 Frequency Stability (Temperature & Voltage Variation) Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions Channel Edge Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions at Band Edges Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Spurious Emissions Channel Edge Antenna FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Spurious Emissions Antenna FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Emissions at Band Edges Antenna Additional Testing Requirements on Sub Band B & C FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emission Limitations Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Spurious Emission Limitations Antenna Key to Results = Complied = Did not comply TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 Page 6 of 105 RFI Global Services Ltd 2.3. Methods and Procedures Reference: ANSI/TIA-603-C-2004 Title: Land Mobile Communications Equipment, Measurements and performance Standards Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2.4. Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 7 of 105 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Description: Radio Shelf Brand Name: IPWireless Model Name or Number: AFB Serial Number: AFJ938000111 FCC ID Number: PKTNODEBAFB Description: Digital Shelf Brand Name: IPWireless Model Name or Number: VT Serial Number: W1J73700CJ16 Description: Sector card 2 (part of VT digital shelf) Brand Name: IPWireless Model Name or Number: Sector card Serial Number: VU1J73700RV17 3.2. Description of EUT The equipment under test was a W-CDMA Wireless Base Station comprising a radio shelf and a digital shelf intended for mounting into a 19” rack. Both shelves are connected together to create a Node B. The equipment utilizes Frequency Division Duplex technology. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. TEST REPORT SERIAL NO: RFI/RPT4/RP75336JD01A ISSUE DATE: 28 JANUARY 2010 Page 8 of 105 RFI Global Services Ltd 3.4. Additional Information Related to Testing Power Supply Requirement: -48.0 V DC ±15% Type of Unit: FDD Wireless base station transceiver Modulation Type: QPSK, 16QAM, 64QAM Duty Cycle: 100% Antenna Ports: Two x 7/16 female. Marked ANT 1 and ANT 2 Antenna Gai…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: IPWireless 700 MHz V5 Node B Model AFB/VT To: FCC Part 90: 2008 Subpart R Test Report Serial No: RFI/RPT2/RP75336JD01B Version 2 Supersedes the Previous Version This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: Checked By: Tony Henriques Signature: Date of Issue: 28 January 2010 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 Page 2 of 42 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 3 of 42 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 8 4. Operation and Monitoring of the EUT during Testing ............................................................. 11 5. Measurements, Examinations and Derived Results ................................................................ 12 6. Measurement Uncertainty .......................................................................................................... 41 Appendix 1. Test Equipment Used ................................................................................................42 TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 Page 4 of 42 RFI Global Services Ltd 1. Customer Information Company Name: IPWireless (UK) Ltd. Address: Unit 7 Greenways Business Park Bellinger Close Chippenham SN15 1BN United Kingdom TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 5 of 42 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR90 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 90 Subpart R (Regulations Governing the Licensing and Use of Frequencies in the 763-775 and 793-805 MHz Bands) Site Registration: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 29 September 2009 to 19 November 2009 TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 Page 6 of 42 RFI Global Services Ltd 2.2. Summary of Test Results FCC Reference (47CFR ) Measurement Port Type Result Part 15.207 Transmitter AC Conducted Emissions AC Mains Part 90.542(a)(3) Transmitter Effective Radiated Power (ERP) Antenna Terminals Part 2.1049 Transmitter Occupied Bandwidth Antenna Terminals Part 90.539(d) Transmitter Frequency Stability (Temperature & Voltage Variation) Antenna Terminals Part 90.210(n) Transmitter Conducted Emissions Mask Antenna Terminals Part 90.543(e) Transmitter Conducted Emissions (Out of Band) Antenna Terminals Part 90.543(e) Transmitter Band Edge Conducted Emissions Antenna Terminals Part 90.543(e)(1) Transmitter Conducted Emissions (769 to 775 MHz and 799 to 805 MHz bands) Antenna Terminals Part 90.543(f) Transmitter Conducted Emissions (1559 MHz to 1610 MHz band) Antenna Terminals Part 90.543(e) Transmitter Radiated Emissions (Out of Band) Enclosure Part 90.543(e) Transmitter Band Edge Radiated Emissions Enclosure Part 90.543(e)(1) Transmitter Radiated Emissions (769 to 775 MHz and 799 to 805 MHz bands) Enclosure Part 90.543(f) Transmitter Radiated Emissions (1559 MHz to 1610 MHz band) Enclosure Key to Results = Complied = Did not comply TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 7 of 42 2.3. Methods and Procedures Reference: ANSI/TIA-603-C-2004 Title: Land Mobile Communications Equipment, Measurements and performance Standards Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2.4. Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 Page 8 of 42 RFI Global Services Ltd 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Description: Radio Shelf Brand Name: IPWireless Model Name or Number: AFB Serial Number: AFJ938000111 FCC ID Number: PKTNODEBAFB Description: Digital Shelf Brand Name: IPWireless Model Name or Number: VT Serial Number: W1J73700CJ16 Description: Sector card 2 (part of VT digital shelf) Brand Name: IPWireless Model Name or Number: Sector card Serial Number: VU1J73700RV17 3.2. Description of EUT The equipment under test was a W-CDMA Wireless Base Station comprising a radio shelf and a digital shelf intended for mounting into a 19” rack. Both shelves are connected together to create a Node B. The equipment utilizes Frequency Division Duplex technology. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. TEST REPORT SERIAL NO: RFI/RPT2/RP75336JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 9 of 42 3.4. Additional Information Related to Testing Power Supply Requirement: -48.0 V DC ±15% Type of Unit: FDD Wireless base station transceiver Mod…

Text truncated - open the document above for the full version.