
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
V5 Node B Installation Guide Version 1.0.6 Page 1 of 44 V5 Node B Installation Guide V5 Node B Installation Guide Version 1.0.6 Page 2 of 44 Information in this document and the products described are subject to change without notice. Β©2000-2007 IPWireless, Inc. All rights reserved. Reproduction, alteration, or distribution in any manner whatsoever without the written permission of IPWireless Inc, is strictly forbidden. Trademarks used in this text: the IPWireless logo, icon and IPWireless Broadband Modem are trademarks of IPWireless, Inc.; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products, IPWireless, Inc., disclaims any proprietary interest in trademarks and trade names other than its own. February 2010 Part No. IPW-1442 V5 Node B Installation Guide Version 1.0.6 Page 3 of 44 WEEE Compliance In compliance with the requirements for marking electrical and electronic equipment as directed in article 11 (2) of Directive 2002/96/EC, Waste from Electrical and Electronic Equipment (WEEE), IPWireless applies a crossed-out bin symbol to all Node B products. The mark signifies that the IPWireless equipment is to be reprocessed or recycled using IPWireless authorized recyclers and processes. This minimizes the disposal of unsorted municipal waste, achieves a high level of separate collection of WEEE, and ensures the environmentally sound disposal of electrical and electronic equipment placed on the market after 13 August 2005. To dispose of equipment marked with the WEEE symbol, IPWireless has contracted with certified companies that can reprocess this equipment per European Union requirements. To find out further information regarding disposal of IPWireless equipment within the EU visit the IPWireless web site, ipwireless.com, or contact your IPWireless representative. V5 Node B Installation Guide Version 1.0.6 Page 4 of 44 Contents 1. Release Version ..................................................................................... 6 2. Safety Precautions ................................................................................ 7 3. General Warnings .................................................................................. 7 4. Overview ................................................................................................. 9 5. General Specifications ........................................................................ 10 6. Installation ............................................................................................ 15 Step 1 Pre-Installation ........................................................................................ 15 Step 2 Parts Shipped & Tools Required ........................................................... 16 Step 3 Site Preparations for Node B Installation ............................................. 20 Step 4 Mounting Installations ............................................................................ 24 Step 5 Ground Installation ................................................................................. 27 Step 6 DC Power Connection-Control Shelf .................................................... 28 Step 7 DC Power Connection-Radio Equipment Shelf .................................... 29 Step 8 Inter-Shelf Connections ......................................................................... 30 Step 9 Backhaul Connections (Iub) to INC ....................................................... 32 Step 9 Backhaul Connections (Iub) to INC ....................................................... 32 Step 10 Antenna Cabling - Installation ............................................................. 35 Step 11 Alarm Connections ............................................................................... 36 Step 12 GPS Installation & Operation ............................................................... 38 Step 13 TTLNA Interfaces .................................................................................. 40 7. APPENDIX ............................................................................................ 41 Appendix A - Installation Check Card ............................................................... 41 Appendix B β Glossary ...................................................................................... 42 V5 Node B Installation Guide Version 1.0.6 Page 5 of 44 Tables Table 2-1 : Safety Symbols ................................................................................................... 7 Table 5-1 : Specifications ................................................................................................... 10 Table 5-2 : Node B Model Types ........................................................................................ 12 Table 6-1 : Control Shelf - Packing List ............................................................................. 17 Table 6-2 : Radio Equipment Shelf - Packing List ............................................................ 18 Table 6-3 : Tools Required .................................................................................................. 19 Table 6-4 : Materials Required ............................................................................................ 19 Table 6-5 : Site Preparation Checklist ............................................................................... 20 Table 6-6 : Ethernet Pin-outs using RJ45 ......................................................................... 33 Table 6-7 : T1/E1 Pin-outs (RJ48C) .................................................................................... 34 Table 6-8 : Alarm Inputs & Outputs ................................................................................... 37 Figures Figure 5-1 : Node B Rack Mount β Control Shelf Physical Dimensions ........................ 11 Figure 5-2 : Noβ¦
Text truncated - open the document above for the full version.
IPWireless 2.5GHz V5 Radio Shelf Model: AMF FCC ID: PKTNODEBAMF External Photographs Figure 1: Front of Radio Shelf Figure 2: Right Side of Radio Shelf Figure 3: Rear of Radio Shelf Figure 4: Left Side of Radio Shelf IPWireless 2.5GHz V5 Radio Shelf Model: AMF FCC ID: PKTNODEBAMF Label Position Exhibit
IPWireless 2.5GHz V5 Radio Shelf Model: AMF FCC ID: PKTNODEBAMF Internal Photographs Figure 1: Radio Shelf β Top Cover Removed Figure 2: Radio Shelf β Bottom Cover Removed Figure 3: Radio Card In Clamshell Figure 4: 12VDC Power Supply Figure 5: RF Power Amplifier β External Figure 6: PA Internal β Lid Removed Figure 7: RF Patch Card β Top Figure 8: RF Patch Card β Bottom Figure 9: Radio Card β Top Figure 10: Radio Cardβ Bottom
Reviewed by: FCC ID: PKTNODEBAMF FCC Pt. 27 / 802.16e TD-CDMA MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1011041796.PKT May 23 - July 1, 2011 2.5GHz Band Single Channel Shelf Page 1 of 40 Β© 2011 PCTEST Engineering Laboratory, Inc. REV 1.0WMX 09/25/07 Applicant Name: Date of Testing: IP Wireless May 23 - July 1, 2011 Unit 7 Greenways Business Park Test Site/Location: Bellinger Close, Chippenham PCTEST Lab., Columbia, MD, USA Wiltshire SN15 1BN Test Report Serial No.: 0Y1011041796.PKT F C C I D : P KT NO DE B AM F AP P L I C AN T : IP W IRE LE S S Application Type: Certification FCC Classification: Licensed Non-Broadcast Transmitter (TNB) FCC Rule Part(s): Β§2; Β§27 Subpart M EUT Type: 2.5GHz Band Single Channel Shelf Model(s): AMF Tx Frequency Range: 2563MHz Max. RF Output Power: 5.458 W (37.37 dBm) QPSK 4.519 W (36.55 dBm) 16QAM 4.295 W (36.33 dBm) 64QAM Emission Designator(s): 8M25G7D (QPSK) / 8M28W7D (16QAM) / 8M28W7D (64QAM) Test Device Serial No.: identical prototype [S/N: N/A] This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in Β§2.947. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Power output listed is conducted for Part 27. PCTEST certifies that no party to this application has been subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 27 Certification Reviewed by: FCC ID: PKTNODEBAMF FCC Pt. 27 / 802.16e TD-CDMA MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1011041796.PKT May 23 - July 1, 2011 2.5GHz Band Single Channel Shelf Page 2 of 40 Β© 2011 PCTEST Engineering Laboratory, Inc. REV 1.0WMX 09/25/07 T A B L E O F C O N T E N T S FCC PART 27 MEASUREMENT REPORT..................................................................................3 1.0 INTRODUCTION ..............................................................................................................................4 1.1 MEASUREMENT PROCEDURE ......................................................................................................... 4 1.2 SCOPE ................................................................................................................................................ 4 1.3 TESTING FACILITY............................................................................................................................. 4 2.0 PRODUCT INFORMATION..............................................................................................................5 2.1 EQUIPMENT DESCRIPTION .............................................................................................................. 5 2.2 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ........................................................................... 5 2.3 LABELING REQUIREMENTS.............................................................................................................. 5 3.0 DESCRIPTION OF TESTS ..............................................................................................................6 3.1 OCCUPIED BANDWIDTH EMISSION LIMITS .................................................................................... 6 3.2 EBS/BRS - FREQUENCY BLOCKS .................................................................................................... 6 3.3 SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL.............................................. 7 3.4 RADIATED SPURIOUS AND HARMONIC EMISSIONS ..................................................................... 7 3.5 FREQUENCY STABILITY / TEMPERATURE VARIATION ................................................................. 7 4.0 TEST EQUIPMENT CALIBRATION DATA ......................................................................................8 5.0 SAMPLE CALCULATIONS ..............................................................................................................9 6.0 TEST RESULTS .............................................................................................................................10 6.1 SUMMARY......................................................................................................................................... 10 6.2 TRANSMITTER CONDUCTED OUTPUT POWER ........................................................................... 11 6.3 OUT OF BAND SPURIOUS EMISSIONS (SIMULTANEOUS TRANSMISSION) .............................. 12 6.4 TD-CDMA RADIATED MEASUREMENTS ........................................................................................ 14 6.5 TD-CDMA FREQUENCY STABILITY MEASUREMENTS ................................................................. 17 7.0 PLOT(S) OF EMISSIONS β TD-CDMA..........................................................................................19 8.0 CONCLUSION................................................................................................................................40 Reviewed by: FCC ID: PKTNODEBAMF FCC Pt. 27 / 802.16e TD-CDMA MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1011041796.PKT May 23 - July 1, 2011 2.5GHz Band Single Channel Shelf Page 3 of 40 Β© 2011 PCTEST Engineering Laboratory, Inc. REV 1.0WMX 09/25/07 MEASUREMENT REPORT FCC Part 2β¦
Text truncated - open the document above for the full version.
IP Wireless FCC ID: PKTNODEBAMF Model: AMF Test Set-Up Photos EUT Type: 2.5GHz Band Single Channel Shelf Page 1 of 2 Β© 2011 PCTEST Engineering Laboratory Inc. TEST SETUP PHOTOGRAPHS IP Wireless FCC ID: PKTNODEBAMF Model: AMF Test Set-Up Photos EUT Type: 2.5GHz Band Single Channel Shelf Page 2 of 2 Β© 2011 PCTEST Engineering Laboratory Inc.
6660-B Dobbin Road Β· Columbia, Maryland Β· United States
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 3 | 27 | 2.56 GHz - 2.56 GHz | 8.57 W | 8M28W7D | 0.2 ppm |

Band 12 LTE Base Station
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
Band 14 LTE Base Station
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
Broadband PCI Express Mini Module
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
LTE Band 12 USB Stick Modem
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter
3GPP Band 12 LTE Base Station
Equipment Class
TNB - Licensed Non-Broadcast Station Transmitter