PKTPEMAEXPCI Express Mini OEM Module

OEM PCI Express Mini Module Integration OEM PCI Express Mini Module Integration Guide V01.03 February 2010 IPWireless Proprietary and Confidential Page 1 of 1 Subject to Non Disclosure Agreement OEM PCI Express Mini Module Integration February 2010 IPWireless Proprietary and Confidential Page 2 of 2 Subject to Non Disclosure Agreement Contents 1 General ................................................................................................................ 3 1.1 Approvals and Dates ............................................................................................................... 3 1.2 Change Record ....................................................................................................................... 3 1.3 Acronyms ................................................................................................................................ 4 1.4 External References ................................................................................................................ 4 2 Introduction .......................................................................................................... 5 2.1 Scope of Document ................................................................................................................. 5 2.2 Overview of Module ................................................................................................................ 5 3 Module Connections ............................................................................................ 6 3.1 PCI Express Mini Interface (J1) .............................................................................................. 6 3.1.1 Universal Serial Bus ........................................................................................................ 6 3.1.2 SIM Interface ................................................................................................................... 6 3.2 Media Independent Interface (J4) ........................................................................................... 6 3.3 RF Connections ...................................................................................................................... 7 3.4 DC Power ................................................................................................................................ 7 4 Mechanical .......................................................................................................... 8 4.1 Thermal Management ............................................................................................................. 8 5 Regulatory Information ........................................................................................ 9 5.1 Compliance with FCC Rules and Regulations ........................................................................ 9 5.2 Exposure to Radio Frequency Signals .................................................................................... 9 6 Annex 1: PCI Express Mini Edge Connector Pinout .......................................... 10 Figures Figure 1: MII Interface J4 ........................................................................................................................ 6 Figure 2: RF Connections ....................................................................................................................... 7 Figure 3: PEM Module ............................................................................................................................ 8 OEM PCI Express Mini Module Integration February 2010 IPWireless Proprietary and Confidential Page 3 of 3 Subject to Non Disclosure Agreement 1 General 1.1 Approvals and Dates Approval Date W. J. Jones 1.2 Change Record Date Version Author Reason For Change Issue 20/08/2008 01.00 PFW New Document. 23/10/2008 01.01 PFW Additional details added. 04/03/2009 01.02 PFW Updated PEM Mechanical drawing. 01/02/2010 01.03 PFW Updated FCC Information OEM PCI Express Mini Module Integration February 2010 IPWireless Proprietary and Confidential Page 4 of 4 Subject to Non Disclosure Agreement 1.3 Acronyms Term Definition MPE Maximum Permissible Exposure OEM Original Equipment Manufacturer PCIe PCI Express PCI SIG PCI Special Interest Group PEM PCI Express Mini SIM Subscriber Identity Module TDD Time Division Duplex UMTS Universal Mobile Telephone System USB Universal Serial Bus 1.4 External References Ref () Number Title 1 FCC Part 15 Radio Frequency Devices 2 FCC Part 27 Miscellaneous Wireless Communications Service 3 FCC Part 90 Private Land Mobile Radio Services 4 PCI SIG PCI Express Base Specification Revision 2.0 5 PCI SIG Card Electromechanical Specification Revision 2.0 6 - PEM + Adapter Thermal Specification Revision 1.0 Note: Where a reference is undated, the latest version applies unless a specific revision is defined. OEM PCI Express Mini Module Integration February 2010 IPWireless Proprietary and Confidential Page 5 of 5 Subject to Non Disclosure Agreement 2 Introduction This document describes the method of integrating the IPWireless PCI Express Mini module into an OEM product. 2.1 Scope of Document This document applies to the IPWireless PCI Express Mini module only. 2.2 Overview of Module The IPWireless PCI Express Mini module provides a complete UMTS TDD wireless modem solution and only requires to be inserted in a PCI Express Mini compliant interface and connection of external antennas. The module is designed to minimise the time and resource required to integrate. OEM PCI Express Mini Module Integration 3 Module Connections 3.1 PCI Express Mini Interface (J1) The IPWireless PCI Express Mini module is provided with a 52 pin edge connector for connection to the external application. This connection supports the following interface types and these are described below. The pinout is shown in Annex 1. 3.1.1 Universal Serial Bus The PCI Express edge connector provides a USB 2.0 interface, this interface supports low spee…

Text truncated - open the document above for the full version.

Unit 7 Greenways Business Park Bellinger Close Chippenham Wiltshire SN15 1BN Telephone: 01249 800100 Facsimile: 01249 800101 IPWireless U.K. Ltd Registered Office as above Reg. No: 4218312 VAT No: 771 3836 15 1 st December 2009 RFI Global Services Ltd Pavillion A Ashwood Business Park Basingstoke Hampshire RG23 8BG RE: 700MHz PCI-Express Mini Module FCC ID: PKTPEMAEX Tune Up Procedure To Whom It May Concern, The IPWireless 700MHz PCI-Express Mini Module FCC ID: PKTPEMAEX is a Power Class 2 device as described by 3GPP TS 125 102 Release 7. Power Class Nominal Maximum Output Power Tolerance 1 +30dBm +1dB/ -3dB 2 +24dBm +1dB/ -3dB 3 +21dBm +2dB/ -2dB 4 +10dBm +4dB/ -4dB Table 1: UE Power Classes ETSI TS 125 102 Rel. 7 The device complies with the power tolerance of +1/-3dB of nominal maximum output power for the device power class. Each device is calibrated in the production facility to ensure the conducted RF power meets the above limits, this data is stored in internal non-volatile memory. There are no user tuneable parts in the device. Yours Faithfully, Peter Warburg Technical Associate IPWireless UK Ltd.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: IPWireless 700 MHz PCI Express Mini Module Model: AEX To: FCC Part 27: 2008 Subpart C Test Report Serial No: RFI/RPT1/RP75335JD01A This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: Checked By: Nigel Davison Signature: Date of Issue: 10 December 2009 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 Page 2 of 94 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 RFI Global Services Ltd Page 3 of 94 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 7 4. Operation and Monitoring of the EUT during Testing ............................................................. 10 5. Measurements, Examinations and Derived Results ................................................................ 11 6. Measurement Uncertainty .......................................................................................................... 93 Appendix 1. Test Equipment Used ................................................................................................94 TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 Page 4 of 94 RFI Global Services Ltd 1. Customer Information Company Name: IPWireless (UK) Ltd Address: Unit 7 Greenways Business Park Bellinger Close Chippenham Wiltshire SN15 1BN England United Kingdom TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 RFI Global Services Ltd Page 5 of 94 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR27 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 27 Subpart C (Miscellaneous Wireless Communication Services) Site Registration: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 19 October 2009 to 31 October 2009 2.2. Summary of Test Results – Lower and Upper Block FCC Reference (47CFR) Measurement Port Type Result FCC Part 15.109 Receiver/Idle Mode Radiated Spurious Emissions Enclosure FCC Part 15.111 Receiver/Idle Mode Conducted Spurious Emissions Main RF Port Enclosure FCC Part 15.111 Receiver/Idle Mode Conducted Spurious Emissions Diversity RF Port Enclosure FCC Part 2.1046 FCC Part 27.50 Transmitter Carrier Output Power and Effective Radiated Power (ERP) Antenna Terminals FCC Part 2.1049 Transmitter Occupied Bandwidth Antenna Terminals FCC Part 2.1055 FCC Part 27.54 Transmitter Frequency Stability (Temperature & Voltage Variation) Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions – Channel Edge Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emissions at Band Edges Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Spurious Emissions – Channel Edge Enclosure FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Spurious Emissions Enclosure FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Emissions at Band Edges Enclosure Additional Testing Requirements on Upper Block FCC Part 2.1051 FCC Part 27.53 Transmitter Conducted Emission Limitations Antenna Terminals FCC Part 2.1051 FCC Part 27.53 Transmitter Radiated Emission Limitations Enclosure Key to Results = Complied = Did not comply TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 Page 6 of 94 RFI Global Services Ltd 2.3. Methods and Procedures Reference: ANSI/TIA-603-C-2004 Title: Land Mobile Communications Equipment, Measurements and performance Standards Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2.4. Deviations from the Test Specification Testing at voltage extremes was carried out at Vnom and Vnom ±9% at the request of the customer and not at V nom and Vnom ±15% as required by the Standard. This is because the EUT complies with the PCI Express Standard which specifies the ±9% tolerance. A breakout point for the power supply was provided by the customer on adaptor board (Serial No. EMS 022630 0004) in order to vary the supply to the EUT as this is normally provided from the PCI Express interface on the standard adaptor board. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 RFI Global Services Ltd Page 7 of 94 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Description: TD_CDMA PCI-E Mini Module Brand Name: IPWireless Model Name or Number: AEX Serial Number: AEXA935000T1B IMEI Number: 358752030000263 Hardware Version Number: Version 1 Software Version Number: None Stated FCC ID Number: PKTPEMAEX 3.2. Description of EUT The equipment under test was a PCI Express mini module. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01A ISSUE DATE: 10 DECEMBER 2009 Page 8 of 94 RFI Global Services Ltd 3.4. Additional Informati…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: IPWireless 700 MHz PCI Express Mini Module Model: AEX To: FCC Part 90: 2008 Subpart R Test Report Serial No: RFI/RPT1/RP75335JD01B This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: Checked By: Tony Henriques Signature: Date of Issue: 28 January 2010 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 Page 2 of 48 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 3 of 48 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 7 4. Operation and Monitoring of the EUT during Testing ............................................................... 9 5. Measurements, Examinations and Derived Results ................................................................ 10 6. Measurement Uncertainty .......................................................................................................... 47 Appendix 1. Test Equipment Used ................................................................................................48 TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 Page 4 of 48 RFI Global Services Ltd 1. Customer Information Company Name: IPWireless (UK) Ltd. Address: Unit 7 Greenways Business Park Bellinger Close Chippenham SN15 1BN United Kingdom TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 5 of 48 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR90 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2008: Part 90 Subpart R (Regulations Governing the Licensing and Use of Frequencies in the 763-775 and 793-805 MHz Bands) Site Registration: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 19 October 2009 to 30 October 2009 2.2. Summary of Test Results FCC Reference (47CFR ) Measurement Port Type Result Part 15.109 Receiver/Idle Mode Radiated Spurious Emissions Enclosure Part 15.111 Receiver/Idle Mode Conducted Emissions Antenna Terminals Part 90.542(a)(6) Transmitter Effective Radiated Power (ERP) Antenna Terminals Part 2.1049 Transmitter Occupied Bandwidth Antenna Terminals Part 90.539(e) Transmitter Frequency Stability (Temperature & Voltage Variation) Antenna Terminals Part 90.210(n) Transmitter Conducted Emissions Mask Antenna Terminals Part 90.543(c) Transmitter Conducted Emissions (Out of Band) Antenna Terminals Part 90.543(c) Transmitter Band Edge Conducted Emissions Antenna Terminals Part 90.543(e)(2) Transmitter Conducted Emissions (769 to 775 MHz and 799 to 805 MHz bands) Antenna Terminals Part 90.543(f) Transmitter Conducted Emissions (1559 MHz to 1610 MHz band) Antenna Terminals Part 90.210(n) Transmitter Radiated Emissions Mask Antenna Part 90.543(c) Transmitter Radiated Emissions (Out of Band) Antenna Part 90.543(c) Transmitter Band Edge Radiated Emissions Antenna Part 90.543(e)(2) Transmitter Radiated Emissions (769 to 775 MHz and 799 to 805 MHz bands) Antenna Part 90.543(f) Transmitter Radiated Emissions (1559 MHz to 1610 MHz band) Antenna Key to Results = Complied = Did not comply TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 Page 6 of 48 RFI Global Services Ltd 2.3. Methods and Procedures Reference: ANSI/TIA-603-C-2004 Title: Land Mobile Communications Equipment, Measurements and performance Standards Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2.4. Deviations from the Test Specification Testing at voltage extremes was carried out at Vnom ±9% at the request of the client and not at Vnom ±15% as required by Part 2.1055. This is because the EUT complies with the PCI Express standard which specifies the ±9% tolerance. A breakout point for the power supply was provided by the customer on adaptor board (Serial No. EMS 022630 0004) in order to vary the supply to the EUT as this is normally provided from the PCI Express interface on the standard adaptor board. TEST REPORT SERIAL NO: RFI/RPT1/RP75335JD01B ISSUE DATE: 28 JANUARY 2010 RFI Global Services Ltd Page 7 of 48 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Description: TD_CDMA PCI-E Mini Module Brand Name: IPWireless Model Name or Number: AEX Serial Number: AEXA935000T1B IMEI Number: 358752030000263 Hardware Version Number: Version 1 Software Version Number: None Stated FCC ID Number: PKTPEMAEX 3.2. Description of EUT The equipment under test was a PCI Express mini module. The EUT is fitted with a transmit / receive main RF port and a second receiver only diversity port. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. 3.4. Additional Information Related to Testing Power Supply Requirement: 3.3 V DC ±9% Equipment Category: Module Type of Unit: PCI Express mini module Modulation Type: QPSK, 16QAM, 64…

Text truncated - open the document above for the full version.