PKW-WSB24Wireless AP with Booster

Instant Wireless ® Series Wireless Network Access Point Use this guide to install: WAP11 ver. 2.6 User Guide COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. Instant Wireless, Linksys, and theLinksys logo are registered trademarks of Linksys Group, Inc. Microsoft, Windows, andthe Windows logo are registered trademarks of Microsoft Corporation. All other trade-marks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Wireless Network Access Point is free from physicaldefects in material and workmanship under normal use for one year from the date of pur-chase. If the product proves defective during this warranty period, go to the Linksys website atwww.linksys.com for complete Return Merchandise Authorization (RMA) assistance. You can also call Linksys Technical Support in order to obtain a RMA Number. BE SURE TOHAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT’S PACK-AGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSEDWITHOUT PROOF OF PURCHASE. When returning a product, mark the RMA Numberclearly on the outside of the package and include a copy of your original proof of pur-chase. All customers located outside of the United States of America and Canada shallbe held responsible for shipping and handling charges.IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD-UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANYPRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-ry, with respect to its products or the contents or use of this documentation and allaccompanying software, and specifically disclaims its quality, performance, mer-chantability, or fitness for any particular purpose. Linksys reserves the right to revise orupdate its products, software, or documentation without obligation to notify any individ-ual or entity. Please direct all inquiries to:Linksys P.O. Box 18558, Irvine, CA 92623. FCC STATEMENTThis product has been tested and complies with the specifications for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equip-ment generates, uses, and can radiate radio frequency energy and, if not installed andused according to the instructions, may cause harmful interference to radio communi-cations. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or televisionreception, which is found by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment or devices• Connect the equipment to an outlet other than the receiver’s• Consult a dealer or an experienced radio/TV technician for assistanceFCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance20cm between the radiator and your body. UG-WAP11 ver. 2.6-111402D JL Wireless Network Access PointTable of ContentsChapter 1: Introduction 1 The Instant Wireless Network Access Point 1 Features 1 Chapter 2: Planning Your Wireless Network 2 Network Topology 2 Ad-Hoc versus Infrastructure Mode 2 Chapter 3: Getting to Know the Wireless NetworkAccess Point 4 The Wireless Network Access Point’s Ports 4 The Wireless Network Access Point’s LEDs 5 Chapter 4: Connecting the Wireless Network Access Point 6 Chapter 5: Setting Up the Wireless Network Access Point 7 Chapter 6: Configuring the Wireless Network Access Point 15 The Setup Tab 15 The Password Tab 21 The Status Tab 22 The Log Tab 24 The Help Tab 25 The Filter Tab 26 The Wireless Tab 28 Appendix A: Troubleshooting 31 Frequently Asked Questions 31 Appendix B: Setting Up the TCP/IP Protocol 35 Setting Up TCP/IP in Windows 35 TCP/IP Setup for Windows 98 and Millennium 36 TCP/IP Setup for Windows 2000 37 TCP/IP Setup for Windows XP 38 INDUSTRY CANADA (CANADA)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.The use of this device in a system operating either partially or completely outdoors may requirethe user to obtain a license for the system according to the Canadian regulations.EC DECLARATION OF CONFORMITY (EUROPE)Linksys Group declares that the Instant Wireless ® Series products included in the Instant Wireless ® Series conform to the specifications listed below, following the provisions of the EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC:• ETS 300-826, 301 489-1 General EMC requirements for Radio equipment. • EN 609 50 Safety • ETS 300-328-2 Technical requirements for Radio equipment. Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use maybe restricted to certain frequencies and/or may require a license for operation. For moredetails, contact Linksys Corporate Compliance.Note: Combinations of power levels and antennas resulting in a radiated power level ofabove 100 mW are considered as not compliant with the above mentioned directive and arenot allowed for use within the European community and countries that have adopted theEuropean R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. Formore details on legal combinations of power levels and antennas, contact Linksys CorporateCompliance.• Linksys Group vakuuttaa täten että Instant Wireless IEEE 802.11 PC Card tyyppinen laiteon direktiivin 1999/5/EY, direktiivin 89/336/EEC ja direktiivin 73/23/EEC oleellisten vaa-timusten ja sitä koskevien näiden direktiivie…

Text truncated - open the document above for the full version.

WWW. LINKS YS . C O M A. With your Access Point/Router powered off, place the Wireless Signal Booster on top of the Access Point/Router. B. Disconnect the Access Point’s/Router’s a ntennas. C. Connect the Signal Booster Cables from the Access Point’s/Router’s a nten- na ports to the Wireless Si gnal Booster’s cable ports. D. Connect the antennas to the Wireless Signal Booster’s a ntenna ports. E. Connect the appropriate power adapters to both the Access Point/Router and Wireless Signal Booster. F. Now you are ready to use the Wireless Signal Booster in your wireless network. Connecting the Wireless Signal Booster toYour Linksys Access Point/Router QI-WSB24-10/25/02NC BW B Package Contents• One Linksys W ireless Signal Booster • Two Signal Booster Cables• Two Power Adapters• One Quick Installation and User Guide • One Wireless Access Point. WAP11 Wireless Signal Booster Instant Wireless ® WSB24 The Wireless Signal Booster with Access Point C D E Note: The images in this document show the Wireless Signal Booster being con- nected to an Access Point; the same directions can be followed when connecting theWireless Signal Booster to a wireless Router. wsb24 quick install-1.qxd 2002/12/20 ¤U¤È 04:02 Page 1 COPYRIGHT & TRADEMARKSCopyright c 2002 Linksys, All Rights Reserved. All other trademarks and brandnames are the property of their respective proprietors.LIMITED WARRANTYLinksys guarantees that every Wireless Signal Booster WSB24 is free from physicaldefects in material and workmanship under normal use for one years from the dateof purchase. If the product proves defective during this warranty period, call LinksysCustomer Support in order to obtain a Return Authorization Number. BE SURE TOHAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. RETURNREQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.When returning a product, mark the Return Authorization Number clearly on the out-side of the package and include a copy of your original proof of purchase. All cus-tomers outside of the United States of America and Canada shall be held responsi-ble for shipping and handling charges.IN NO EVENT SHALL LIN KSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DEFECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-QUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITSACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOTISSUE REFUNDS. WARRANTY DOES NOT COVER NATURAL DISASTERS ORACTS OF NATURE.Linksys makes no warranty or representation, expressed, implied, or statutory, withrespect to its products or the contents use of this documentation and all accompany-ing software, and specially disclaims its quality, performance, merchantability, or fit-ness for any particular purpose. Linksys reserves the right to revise or update itsproducts, software, or documentation without obligation to notify any individual orentity. Please direct all inquiries to :Linksys P.O.Box 18558, Irvine, CA 92623CAUTION : ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED IN THIS MANUAL COULD VOID YOUR AUTHORIZATION TO USETHIS DEVICE. This device should be operated at least 2.0m away from any person FCC STATEMENTThe Wireless Signal Booster WSB24 has been tested and found to comply with thelimits for a class B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a resi-dential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:—-Reorient or relocate the rece iving antenna. —-Increas e the separation between the equipment and receiver. —-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —-Con sult the dealer or an experienced radio/TV technician for help. Regulatory information / DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance withthe instructions included in the user documentation provided with the product. Anychanges or modifications (including the antennas) made to this device that are notexpressly approved by the manufa cturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television inter-ference caused by unauthorized modification of this device, or the substitution of theconnecting cables and equipment other than manufacturer specified. It is the respon-sibility of the user to correct any interference caused by such unauthorized modifica-tion, substitution or attachment. Manufacturer and its authorized resellers or distribu-tors will assume no liability for any damage or violation of government regulationsarising from failing to comply with these guidelines.CAUTION: To maintain compli ance with FCC’sRF exposure guidelines, this equipment should be installed and operated with minimum distance20cm between the radiator and your body. Use on the suppliedantenna. Unauthorized antenna, modification, or attachments coulddamage the transmitter and may violate FCC regulations. MPE Statement (Safety Information)Your device contains a low power transmitter. When device is transmitted it sendsout Radio Frequency (RF) signal.Safety InformationIn order to maintain compliance with the FCC RF exposure guidelines, this equip-ment should be installed and operated with minimum distance 20cm between theradiator and your body.Use only with supplied antenna. Unauthorized antenna, modification, or attachmentscould damage the transmitter and may violate FCC regulations.Caution Statement of the FCC Radio Frequ…

Text truncated - open the document above for the full version.

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (AP with Booster) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (Booster) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (Booster)

RD / IE NOTE: 1. 2. : 55.5x12.7mm 3. +- 1 mm WB1000#LK LBWB1000-RCC-LK120 V1.0 10/31/2002 CorelDRAW 9.0 Erica ext. 6104 = 1:1 12.7 mm 55.5mm NON

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 ID LABEL FCC Location

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT(AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT(AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT(AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (Booster) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 PHOTOS OF EUT (Booster)

Operational Description The WSB24 consists of a RF power amplifier and a wireless access point router, WAP11. ¾ The operational Frequency Band: 2400~2483.5MHz ¾ Number of channel: 11 ¾ Channel spacing: 5 MHz ¾ Rated RF output power: 146.6mW ¾ Modulation type: QPSK/BPSK/CCK ¾ Bit rate of transmission: 11Mbps ¾ Antenna type: Sleeve dipole To Access Point / Router Other description for the Signal Booster:

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan TEST REPORT Reference No.:A02120305 Report No.:FCCA02120305 FCC ID:PKW-WSB24 Page:1 of 45 Date: Dec. 05, 2002 Product Name: Wireless Access Point (AP) with Signal Booster (SB) Model Number: WSB24 Applicant: THE LINKSYS GROUP, INC. 17401 ARMSTRONG AVE., IRVINE, CA 92614, U.S.A. Date of Receipt: Dec. 1, 2002 Finished date of Test: Dec. 4, 2002 Applicable Standards: 47 CFR Part 15, Subpart C ANSI C63.4:1992 We, Spectrum Research & Testing Laboratory Inc., hereby certify that one sample of the above was tested in our laboratory with positive results according to the above-mentioned standards. The records in the report are an accurate account of the results. Details of the results are given in the subsequent pages of this report. Tested By : , Date: Checked By : ( James Lee ) , Date: Approved By : (Spring Wang) , Date: ( Harris W. Lai, Director ) Lab Code: 200099-0 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan TEST REPORT Reference No.:A02120305 Report No.:FCCA02120305 FCC ID: PKW-WSB24 Page:2 of 45 Date:Dec.05, 2002 TABLE OF CONTENTS 1. DOCUMENT POLICY AND TEST STATEMENT................................................4 1.1 DOCUMENT POLICY.........................................................................................4 1.2 TEST STATEMENT............................................................................................4 2. DESCRIPTION OF EUT AND TEST MODE.......................................................4 2.1 GENERAL DESCRIPTION OF EUT...................................................................4 2.2 DESCRIPTION OF SUPPORT UNIT..................................................................5 2.3 DESCRIPTION OF TEST MODE.......................................................................5 3. DESCRIPTION OF APPLIED STANDARDS......................................................6 4 . TECHNICAL CHARACTERISTICS TEST.........................................................7 4.1 CONDUCTED EMISSION TEST........................................................................7 4.1.1 LIMIT..................................................................................................................7 4.1.2 TEST EQUIPMENT............................................................................................7 4.1.3 TEST SETUP.....................................................................................................8 4.1.4 TEST PROCEDURE..........................................................................................8 4.1.5 EUT OPERATING CONDITION.........................................................................8 4.1.6 TEST RESULT...................................................................................................9 4.2 RADIATED EMISSION TEST...........................................................................11 4.2.1 LIMIT................................................................................................................11 4.2.2 TEST EQUIPMENT..........................................................................................12 4.2.3 TEST SET-UP..................................................................................................13 4.2.4 TEST PROCEDURE........................................................................................14 4.2.5 EUT OPERATING CONDITION.......................................................................14 4.2.6 TEST RESULT.................................................................................................15 4.3 6DBC BANDWIDTH TEST...............................................................................20 4.3.1 LIMIT................................................................................................................20 4.3.2 TEST EQUIPMENT..........................................................................................20 4.3.3 TEST SET-UP..................................................................................................20 4.3.5 EUT OPERATING CONDITION.......................................................................20 4.3.6 TEST RESULT.................................................................................................21 4.4 PEAK POWER TEST........................................................................................24 4.4.1 LIMIT................................................................................................................24 4.4.2 TEST EQUIPMENT..........................................................................................24 4.4.3 TEST SET-UP..................................................................................................25 4.4.5 EUT OPERATING CONDITION.......................................................................25 4.4.6 TEST RESULT.................................................................................................26 4.5 BAND EDGE TEST...........................................................................................29 4.5.1 LIMIT................................................................................................................29 4.5.2 TEST EQUIPMENT..........................................................................................30 4.5.3 TEST SET-UP..................................................................................................31 4.5.5 EUT OPERATING CONDITION.......................................................................32 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan TEST REPORT Reference No.:A02120305 Report No.:FCCA02120305 FCC ID: PKW-WSB24 Page:3 of 45 Date:Dec.05, 2002 4.5.6 TEST RESULT.................................................................................................33 4.6 POWER DENSITY TEST............................…

Text truncated - open the document above for the full version.

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 6. PHOTOS OF TESTING - Conducted test (Wireless AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 - Conducted test(Wireless Router) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 - Radiated test(Wireless AP) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan Tel: 886-3-4987684 Fax:: 886-3-4986528 - Radiated test(Wireless Router)