POO-DR237973Remote Controller

User Manual DR237973 Important Information This document provides you with important information about the safe use of your DR237973 Development kit. Please read this information carefully, and keep this document for future reference. This development kit is provided to you under the terms of your DR237973 Development Kit License and may be used only in accordance with the License. DR237973 is sold to professional developers only. DR237973 is not sold for consumer market. IMPORTANT SAFETY NOTICE: To ensure safe use of the development kit: - Only allow professional developers to use the development kit. - Do not allow anyone else to use it, particularly children. - Only use the development kit in a product development workplace under controlled circumstances. Product Specification This DR237973 development kit is the controller for master console system. - Set up 1. Prepare the DR237973 and the console. 2. Connect USB cable to the DR237973 to charge battery. 3. Start up the console. 4. Press [SYNC] button. 5. The Blue LED will turn on and DR237973 will be able to use for the console system. - Usage This device is used as shown below, holding in hands in front of body. Control the buttons with your thumbs. Do not put any person or thing between this device and the master console since there is wireless communication. Exposure to Radio Frequency Energy DR237973 contain radio transmitter and receiver. When on, this development kit sends and receives radio frequency (RF) energy through its antenna. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. DR237973 is designed and manufactured to comply with the limits for exposure to RF energy set by the Federal Communications Commission (FCC) of the United States, Industry Canada (IC) of Canada, and regulating entities of the European Union. Radio Frequency Interference Radio-frequency emissions from electronic equipment can negatively affect the operation of other electronic equipment, causing them to malfunction. Although DR237973 is designed, tested, and manufactured to comply with regulations governing radio frequency emission in countries such as the United States, Canada, the European Union, and Japan, the wireless transmitters and electrical circuits in DR237973 may cause interference in other electronic equipment. Therefore, please take the following precautions: FCC Compliance Statements Caution: Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Canadian Compliance Statement This Class B digital apparatus complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.

External Photo 11 2 2 33

ID Label Model: DR237973FCC ID: POO ‐ DR237973 IC: 4250A ‐ DR237973 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT COUSE HARMFUL INTERFACE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES ‐ 003. Cet appareil numérique de la Classe B est conforme à la norme NMB ‐ 003 du Canada. (Bottom side)

Inte Mod ernal Photo del: DR2379973

REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 64 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. 10 MAXIMUM PERMISSIBLE EXPOSURE FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 65 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. IC RULES IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 66 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. EQUATIONS Power density is given by: S = EIRP / (4 * Pi * D^2) where S = Power density in W/m^2 EIRP = Equivalent Isotropic Radiated Power in W D = Separation distance in m Power density in units of W/m^2 is converted to units of mWc/m^2 by dividing by 10. Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) where D = Separation distance in m EIRP = Equivalent Isotropic Radiated Power in W S = Power density in W/m^2 In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. LIMITS From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 RESULTS BandModeSeparationOutputAntennaIC PowerFCC Power DistancePowerGainDensityDensity (m)(dBm)(dBi)(W/m^2)(mW/cm^2) 2.4 GHzBluetooth0.200.48-0.910.00180.0002

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR Remote Controller MODEL NUMBER: DR237973 FCC ID: POO-DR237973 IC: 4250A-DR237973 REPORT NUMBER: 32HE0052-SH-01-A ISSUE DATE: March 22, 2012 Prepared for MITSUMI ELECTRIC CO., LTD. 2-11-2, Tsurumaki, Tama-shi, Tokyo, 206-8567, JAPAN Prepared by UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken 259-1220 JAPAN Telephone number : +81 463 50 6400 Facsimile number : +81 463 50 6401 JAB Accreditation No. : RTL02610 RTL2610 13-EM-F0429 REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 2 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. Revision History Rev. Issue Date Revisions Revised By - 03/22/12 Initial Issue A. Hayashi REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 3 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. FACILITIES AND ACCREDITATION ..................................................................................5 4. CALIBRATION AND UNCERTAINTY .................................................................................5 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................5 4.2. SAMPLE CALCULATION ..............................................................................................5 4.3. MEASUREMENT UNCERTAINTY.................................................................................5 5. EQUIPMENT UNDER TEST ................................................................................................6 5.1. DESCRIPTION OF EUT ................................................................................................6 5.2. MAXIMUM OUTPUT POWER .......................................................................................6 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................6 5.4. SOFTWARE AND FIRMWARE .....................................................................................6 5.5. WORST-CASE CONFIGURATION AND MODE ............................................................6 5.6. DESCRIPTION OF TEST SETUP .................................................................................7 6. TEST AND MEASUREMENT EQUIPMENT ........................................................................9 7. ANTENNA PORT TEST RESULTS ...................................................................................10 7.1. BASIC DATA RATE GFSK MODULATION ..................................................................10 7.1.1. 20 dB AND 99% BANDWIDTH ..............................................................................10 7.1.2. HOPPING FREQUENCY SEPARATION ...............................................................17 7.1.3. NUMBER OF HOPPING CHANNELS ....................................................................19 7.1.4. AVERAGE TIME OF OCCUPANCY ......................................................................24 7.1.5. OUTPUT POWER .................................................................................................31 7.1.6. AVERAGE POWER ...............................................................................................35 7.1.7. CONDUCTED SPURIOUS EMISSIONS ................................................................36 8. RADIATED TEST RESULTS ................................................................................................48 8.1 LIMITS AND PROCEDURE .........................................................................................48 8.2 TRANSMITTER ABOVE 1 GHz ......................................................................................49 8.2.1 BASIC DATA RATE GFSK MODULATION ............................................................49 8.2.2 ENHANCED DATA RATE 8PSK MODULATION ...................................................58 8.3 RECEIVER ABOVE 1 GHz ..........................................................................................59 8.4 WORST-CASE BELOW 1 GHz ...................................................................................60 9 AC POWER LINE CONDUCTED EMISSIONS ..................................................................63 10 MAXIMUM PERMISSIBLE EXPOSURE ............................................................................64 11 SETUP PHOTOS ...............................................................................................................67 REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 4 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: MITSUMI ELECTRIC CO., LTD. 2-11-2, Tsurumaki, Tama-shi, Tokyo, 206-8567, JAPAN EUT DESCRIPTION: Remote Controller MODEL: DR237973 SERIAL NUMBER: DE2151 (Radiated tests), DE1078 (Conducted tests) DATE TESTED: March 15 to 16, 2012 APPLICABLE ST ANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass INDUSTRY CANADA RSS-210 Issue 8 Annex 8 Pass INDUSTRY CANADA RSS-GEN Issue 3 Pass UL Japan, Inc. tested the above equipment in accordance with the requirem…

Text truncated - open the document above for the full version.

REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 67 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. 11 SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 68 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO RADIATED BACK PHOTO REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 69 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS PHOTO Y-AXIS PHOTO REPORT NO: 32HE0052-SH-01-A DATE: March 22, 2012 FCC ID: POO-DR237973 IC: 4250A-DR237973 Page 70 of 70 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN TEL: +81 463 50 6400 FAX: +81 463 50 6401 This report shall not be reproduced except in full, without the written approval of UL Japan, Inc. END OF REPORT Z-AXIS PHOTO