PPQ-BSM700Bluetooth Module

BSM-700 Specification Page 1/31 2014/03/31 LTC Network Access Confidential PRODUCT SPECIFICATION CSR8670 Full function Bluetooth Module BSM-700 Lite-On P/N: 2170000002KD Version 1.3 Author: Action Cheng Editor: Javon Tseng Project Leader: Daniel KW Yang Approved by: Daniel KW Yang Change History Revision Date Author Change List Version 1.0 2014 / 01 / 13 Javon Tseng Preliminary Version1.1 2014 /01 / 24 Daniel 1. Add pinout dimensions 2. Remove NC (Pin57) and connect AIO[0] to PIN 57. 3. Remove PIO0 (Pin4) and connect AIO[1] to PIN 4 4. Add PIO_3 to PIN60 Version1.2 2014 /02 / 06 Javon 1. Update Block Diagram 2. Update Application block diagram 3. Update main board schematic Version1.3 2014 /04 / 03 Javon 1. Add Packing Model 2. Update Current Consumption 3. Update Package Dimensions 4. Update RF Characteristics 5. Update Interface Specifications 6. Update Layout * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC. BSM-700 Specification Page 2/31 2014/03/31 LTC Network Access Confidential CONTENT 1 PRODUCT OVERVIEW ................................................................................................................. 4 1.1 DESCRIPTION ........................................................................................................................ 4 1.2 FEATURES ............................................................................................................................. 4 1.3 GENERAL SPECIFICATIONS ................................................................................................. 4 1.4 BLOCK DIAGRAM .................................................................................................................. 5 1.5 PIN CONFIGURATION............................................................................................................ 5 1.6 PINOUT DIAGRAM ................................................................................................................ 8 1.7 PACKAGE DIMENSIONS......................................................................................................... 9 1.8 DIMENSION ........................................................................................................................ 10 1.9 SHIELDING .......................................................................................................................... 11 2 ELECTRICAL CHARACTERISTICS ................................................................................................. 12 2.1 ABSOLUTE MAXIMUM RATINGS ......................................................................................... 12 2.2 GUARANTEED OPERATING TEMPERATURE ......................................................................... 12 2.3 RECOMMENDED OPERATING CONDITIONS ........................................................................ 12 2.4 INPUT/OUTPUT TERMINAL CHARACTERISTICS.................................................................... 12 2.5 RF CHARACTERISTICS .......................................................................................................... 13 2.5.1 RADIO CHARACTERISTICS - BASIC DATA RATE .................................................................... 13 2.5.2 RADIO CHARACTERISTICS - ENHANCED DATA RATE ............................................................ 13 2.5.3 RADIO CHARACTERISTICS - LOW ENERGY ........................................................................... 13 2.6 CURRENT CONSUMPTION (DESIGN REFERENCE) ................................................................. 13 2.7 APPLICATION BLOCK DIAGRAM .......................................................................................... 14 3 RF MEASUREMENT ENVIRONMENT SYSTEM ............................................................................ 15 3.1 INTERNAL FLASH................................................................................................................. 15 3.2 SYSTEM AREA ..................................................................................................................... 15 3.3 RF AREA .............................................................................................................................. 16 3.4 USER AREA ......................................................................................................................... 16 4 INTERFACE SPECIFICATIONS ..................................................................................................... 17 4.1 UART INTERFACE ................................................................................................................ 17 BSM-700 Specification Page 3/31 2014/03/31 LTC Network Access Confidential 4.2 USB INTERFACE................................................................................................................... 17 4.3 DIGITAL AUDIO INTERFACE ................................................................................................. 17 5 NOTES ON OPERATION ............................................................................................................ 18 5.1 POWER-ON SEQUENCE ....................................................................................................... 18 5.2 IO STATE AT RESET AND RECOMMENDED TERMINATION HANDLING ................................. 18 6 SCHEMATIC .............................................................................................................................. 19 6.1 MAIN BLOCK: ...................................................................................................................... 19 6.2 RF ....................................................................................................................................... 20 7 PLACEMENT ...........................................................................................................…

Text truncated - open the document above for the full version.

Lite-On Technology Corp. FCC ID.: PPQ-BSM700 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Tel : +886-2-2222-6181 Federal Communications Commission May 02, 2014 Authorization and Evaluation Division ATTESTATION FCC ID: PPQ-BSM700 Product: Bluetooth Module We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ------------------------------------------------------ TC WU / Director Lite-On Technology Corp.

Lite-On Technology Corp. FCC ID.: PPQ-BSM700 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Tel : +886-2-2222-6181 Lite-On Technology Corp. 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Tel : +886-2-2222-6181 Fax: +886-2-2226-6749 Federal Communications Commission May 02, 2014 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (BSM-700) Schem.pdf Block Diagram: (BSM-700) BlkDia.pdf Operational Description : (BSM-700) OPDes.pdf The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, -------------------------------------------------- TC WU / Director Lite-On Technology Corp.

RF_160, Issue 03 Lite-On Technology Corp. Declaration of Authorization We Name: Lite-On Technology Corp. Address: 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. City: New Taipei City . Country: Taiwan, R.O.C . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Bluetooth Module FCC ID: PPQ-BSM700 Trademark: LITE-ON on our behalf. Date: 2014/05/02.. City:  New Taipei City .. Name:  TC WU.. (2) Function: ............ Director............. Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

RF_734_00, Issue 1 Modular Approval Request FCC (per FCC Part 15 Section 15.212) FCC ID: PPQ-BSM700 Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. The modular transmitter has its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The EUT has buffered data inputs, it is integrated in chip U3: CSR8670C‑IBBH‑R. 3. The modular transmitter must have its own power supply regulation. The EUT have Power supply regulation, it is integrated in chip U3: CSR8670C‑IBBH‑R. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. The modular transmitter complies with the antenna requirements of Section 15.203 and 15.204(c). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The modular transmitter is tested in a stand-alone configuration. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please refer to the user manual instructions. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter complies with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The modular transmitter complies with any applicable RF exposure requirements. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): _TC WU_________________ RF_734_00, Issue 1 Date: __May 02, 2014___ Signature: __________________________

Report No.: 1440337R-RFUSP01V00 Page : 1 of 8 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (With I-PEX Connector) (2) EUT Photo (With I-PEX Connector) Report No.: 1440337R-RFUSP01V00 Page : 2 of 8 (3) EUT Photo (With I-PEX Connector) (4) EUT Photo (Without I-PEX Connector) Report No.: 1440337R-RFUSP01V00 Page : 3 of 8 (5) EUT Photo (Without I-PEX Connector) (6) EUT Photo (Without I-PEX Connector)

Lite-On Technology Corp. FCC ID.: PPQ-BSM700 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Tel : +886-2-2222-6181 FCC ID Label (With I-PEX Connector) (Without I-PEX Connector)

Lite-On Technology Corp. FCC ID.: PPQ-BSM700 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Tel : +886-2-2222-6181 The FCC ID Label will be placed on the equipment as shown in the photograph below.

Report No.: 1440337R-RFUSP01V00 Page : 4 of 8 (7) EUT Photo (With I-PEX Connector) (8) EUT Photo (With I-PEX Connector) Report No.: 1440337R-RFUSP01V00 Page : 5 of 8 (9) EUT Photo (Without I-PEX Connector) (10) EUT Photo (Without I-PEX Connector) Report No.: 1440337R-RFUSP01V00 Page : 6 of 8 (11) EUT Photo (Antenna: RFDPA520900SMAB601) (12) EUT Photo (Antenna: RFDPA520900SMAB601) Report No.: 1440337R-RFUSP01V00 Page : 7 of 8 (13) EUT Photo (Antenna: RFDPA520900SMAB601) (14) EUT Photo (Antenna: RFFPA301015IMAB301) Report No.: 1440337R-RFUSP01V00 Page : 8 of 8 (15) EUT Photo (Antenna: RFFPA301015IMAB301)

Report No. 1440337R-RFUSP01V00 Page: 1 of 3 RF Exposure Evaluation declaration Product Name Bluetooth Module Model No. BSM-700 FCC ID PPQ-BSM700 Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Date of Receipt Apr. 14, 2014 Date of Declaration May 02, 2014 Report No. 1440337R-RFUSP01V00 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No. 1440337R-RFUSP01V00 Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 1440337R-RFUSP01V00 Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product : Bluetooth Module Test Item : RF Exposure Evaluation Test Site : No.3 OATS Operation Frequency 2402 ~ 2480MHz Maximum Conducted output power 8.30dBm Antenna gain 4.78dBi Output Power Into Antenna & RF Exposure Evaluation Distance: Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 6.7608 0.004043 Power density is lower than the limit (1 mW/cm2).

Report No. 1440337R-RFUSP01V00-A Page: 1 of 45 FCC Test Report Product Name Bluetooth Module Model No. BSM-700 FCC ID. PPQ-BSM700 Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Date of Receipt Apr. 14, 2014 Issued Date May 02, 2014 Report No. 1440337R-RFUSP01V00-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No. 1440337R-RFUSP01V00-A Page: 2 of 45 Test Report Issued Date: May 02, 2014 Report No.: 1440337R-RFUSP01V00-A Product Name Bluetooth Module Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. Manufacturer LITE-ON TECHNOLOGY (Changzhou) CO., LTD Model No. BSM-700 FCC ID. PPQ-BSM700 EUT Rated Voltage DC 3.1V~3.6V EUT Test Voltage AC 120V/60Hz Trade Name LITE-ON Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.10: 2009, KDB 558074 Test Result Complied Documented By: ( Senior Engineering Adm. Specialist / Anita Chou ) Tested By : ( Engineer / Jack Hsu ) Approved By : ( Director / Vincent Lin) Report No. 1440337R-RFUSP01V00-A Page: 3 of 45 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ...............................................................................................................5 1.1. EUT Description......................................................................................................................................5 1.2. Operational Description...........................................................................................................................7 1.3. Tested System Details..............................................................................................................................8 1.4. Configuration of Tested System ..............................................................................................................8 1.5. EUT Exercise Software ...........................................................................................................................8 1.6. Test Facility .............................................................................................................................................9 2. CONDUCTED EMISSION ................................................................................................................10 2.1. Test Equipment ......................................................................................................................................10 2.2. Test Setup ..............................................................................................................................................10 2.3. Limits.....................................................................................................................................................11 2.4. Test Procedure .......................................................................................................................................11 2.5. Uncertainty ............................................................................................................................................11 2.6. Test Result of Conducted Emission .......................................................................................................12 3. PEAK POWER OUTPUT ..................................................................................................................14 3.1. Test Equipment ......................................................................................................................................14 3.2. Test Setup ..............................................................................................................................................14 3.3. Limit ......................................................................................................................................................14 3.4. Test Procedure .......................................................................................................................................14 3.5. Uncertainty ............................................................................................................................................14 3.6. Test Result of Peak Power Output .........................................................................................................15 4. RADIATED EMISSION .....................................................................................................................16 4.1. Test Equipment ......................................................................................................................................16 4.2. Test Setup ..............................................................................................................................................16 4.3. Limits.....................................................................................................................................................17 4.4. Test Procedure .......................................................................................................................................18 4.5. Uncertainty ............................................................................................................................................18 4.6. Test Result of Radiated Emission ..........................................................................................................19 5. RF ANTENNA CONDUCTED TEST................................................................................................23 5.1. Test …

Text truncated - open the document above for the full version.

Report No.: 1440337R-RFUSP01V00 Page : 1 of 4 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 1440337R-RFUSP01V00 Page : 2 of 4 Front View of Radiated Test Back View of Radiated Test Report No.: 1440337R-RFUSP01V00 Page : 3 of 4 Front View of Radiated Test Back View of Radiated Test Report No.: 1440337R-RFUSP01V00 Page : 4 of 4 Test Fixture