PPQ-SWS003ASUS Miracast Dongle

USER MANUAL Q8596 ASUS MiraCast  English Package contents NOTES: If any of the items is damaged or missing, contact your retailer. Knowing the parts LED indicator cover HDMI connector Micro USB portASUS MiraCast reset button IMPORTANT! • Use the micro USB port to connect the ASUS MiraCast to a power source. • Doing firmware updates ensures that your ASUS MiraCast has the latest software installed. To enable this, press and hold the ASUS MiraCast button for more than five (5) seconds. • Press and hold the ASUS MiraCast button for more than ten (10) seconds to restore your ASUS MiraCast to its factory settings. ASUS MiraCastpower adaptermicro USB cable ASUS Tablet technical documentations ASUS MiraCast  English Using your ASUS MiraCast NOTE: The following illustration is for reference only. A. Connect the micro USB cable to your ASUS MiraCast. B. Plug your ASUS MiraCast to the power adapter. C. Plug the power adapter to a power source. D. Connect the HDMI connector of your ASUS MiraCast to the HDMI port of your external monitor or display. E. Turn on your tablet or mobile device and follow the steps shown onscreen. NOTE: For more details on updating your ASUS MiraCast’s firmware, refer to http://www.asus.com/Tablet_Mobile_Accessories/ ASUS MiraCast connection Firmware updateFactory reset Blue (5 seconds after connecting to display) ASUS MiraCast is turned on. RedPreparing for firmware update. PurplePreparing for factory reset. Blinking blue Currently connecting to ASUS MiraCast. Blinking red Update ongoingBlinking purple Factory reset ongoing BlueConnection is ready. BlueFirnware update is done BlueFactory reset is done LED indicator table ASUS MiraCast  Čeština Obsah krabice POZNÁMKY: Pokud je některá z položek poškozena nebo chybí, se obraťte na prodejce. Popis součástí Indikátor LED kryt Konektor HDMI Port mikro USBResetovací tlačítko ASUS MiraCast DŮLEŽITÉ! • Přístroj ASUS MiraCast připojte ke zdroji napájení prostřednictvím portu mikro USB. • Aktualizace firmwaru zaručují, aby byl v přístroji ASUS MiraCast nainstalován nejnovější software. Aktivujte stisknutím a podržením tlačítka ASUS MiraCast déle než pět (5) sekund. • Stisknutím a podržením tlačítka ASUS MiraCast déle než deset (10) sekund obnovíte tovární nastavení přístroje ASUS MiraCast. ASUS MiraCastnapájecí adaptérkabel mikro USB ASUS Tablet technická dokumentace ASUS MiraCast  Čeština Používání přístroje ASUS MiraCast POZNÁMKA: Následující obrázek je pouze orientační. A. Připojte kabel mikro USB k přístroji ASUS MiraCast. B. Připojte přístroj ASUS MiraCast k napájecímu adaptéru. C. Připojte napájecí adaptér ke zdroji napájení. D. Připojte konektor HDMI přístroje ASUS MiraCast k portu HDMI externího monitoru nebo displeje. E. Zapněte váš tablet nebo mobilní zařízení a postupujte podle zobrazených pokynů. POZNÁMKA: Podrobné pokyny pro aktualizaci firmwaru přístroje ASUS MiraCast viz http://www.asus.com/Tablet_Mobile_Accessories/ Připojení ASUS MiraCastAktualizace firmwaruObnova továrních nastavení Modrá (5 sekund po připojení k displeji) Přístroj ASUS MiraCast je zapnutý. ČervenáPříprava na aktualizaci firmwaru. PurpurováPříprava na obnovu továrních nastavení. Bliká modře Připojování k přístroji ASUS MiraCast. Bliká červeně Probíhá aktualizace Bliká purpurově Probíhá obnova továrních nastavení ModráPřipojení je připraveno. ModráAktualizace firmwaru je dokončena ModráObnova továrních nastavení je dokončena Tabulka indikací LED ASUS MiraCast  Deutsch Lieferumfang HINWEISE: Wenden Sie sich an Ihren Händler, falls etwas fehlen oder beschädigt sein sollte. Übersicht über die Teile LED-Anzeige Kappe HDMI-Anschluss Micro-USB-PortReset-Taste des ASUS MiraCast WICHTIG! • Verbinden Sie den ASUS MiraCast über den Micro-USB-Port mit der Stromversorgung. • Durch Firmware-Aktualisierungen wird gewährleistet, dass die neueste Software auf Ihrem ASUS MiraCast installiert ist. Halten Sie die ASUS MiraCast-Taste zur Aktivierung mehr als fünf (5) Sekunden gedrückt. • Halten Sie die ASUS MiraCast-Taste zum Rücksetzen des ASUS MiraCast auf seine Standardeinstellungen mehr als zehn (10) Sekunden gedrückt. ASUS MiraCastNetzteilMicro-USB-Kabel ASUS Tablet Technische Dokumentation ASUS MiraCast  Deutsch Ihren ASUS MiraCast benutzen Hinweis: Die folgende Abbildung dient nur der Veranschaulichung. A. Verbinden Sie das Micro- USB-Kabel mit Ihrem ASUS MiraCast. B. Verbinden Sie Ihren ASUS MiraCast mit dem Netzteil. C. Schließen Sie das Netzteil an die Stromversorgung an. D. Verbinden Sie den HDMI- Anschluss Ihres ASUS MiraCast mit dem HDMI- Port Ihres externen Monitors oder Displays. E. Schalten Sie Ihr Tablet oder Mobilgerät ein und befolgen die am Bildschirm angezeigten Schritte. Hinweis: Weitere Einzelheiten zur Aktualisierung der Firmware Ihres ASUS MiraCast finden Sie hier: http://www.asus.com/Tablet_Mobile_Accessories/ ASUS MiraCast- Verbindung Firmware- Aktualisierung Werksrücksetzung Blau (5 Sekunden nach Verbindung mit dem Display) ASUS MiraCast schaltet sich ein. RotVorbereitung auf Firmware- Aktualisierung. LilaVorbereitung auf Werksrücksetzung. Blinkt blau Aktueller Verbindungsaufbau mit ASUS MiraCast. Blinkt rot Aktualisierung wird durchgeführt. Blinkt lila Werksrücksetzung wird durchgeführt. BlauVerbindung ist bereit.BlauFirmware- Aktualisierung ist abgeschlossen. BlauWerksrücksetzung ist abgeschlossen. Tabelle zur LED-Anzeige ASUS MiraCast  Español Contenido del paquete NOTAS: Si alguno de los artículos anteriores falta o está dañado, póngase en contacto son su distribuidor. Reconocer los componentes del dispositivo Indicador LED Tapa Conector HDMI Puerto micro- USB Botón de restablecimiento de ASUS MiraCast ¡IMPORTANTE! • Utilice el puerto micro-USB para conectar su ASUS MiraCast a una fuente de alimentación. • Las actualizaciones de firmware garantizan que su ASUS MiraCast tiene el software más recientes instalado. Para habilitar esta funcionalidad, presione sin soltar el botón de ASUS MiraCast durante más de cinco (5) segundos. • P…

Text truncated - open the document above for the full version.

LITE-ON Technology Corp. 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 TEL No.: 86-769-7312821 FAX No.: 86-769-7312821 Attestation for FCC Declaration of Conformity FCC ID: PPQ-SWS003 Data: Dec. 04, 2013 Please be notified that we, the undersigned, LITE-ON Technology Corp., declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is 138468R-ITUSP02V02 Testing in regards to this report was done by QuieTek Corporation, located at 2F, No.345, Xinhu 2nd Rd., Neihu District,, Taipei Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, ------------------------------------------------------------ TC Wu / Deputy Director(R & D Division) LITE-ON Technology Corp. Tel: 86-769-7312821 Fax: 86-769-7312821 Email: [email protected]

LITE-ON Technology Corp. 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 TEL No: 86-769-7312821 FAX No.: 86-769-7312821 About WiFi Channels 12 & 13 Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID : PPQ-SWS003 and IC: 4491A-SWS003 We client devices don't operating on Channels 12 and 13, when a master transmits on these channels. This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. Signature ---------------------------------------------------------------------------------------------------------- TC Wu / Deputy Director(R & D Division) LITE-ON Technology Corp. Tel: 86-769-7312821 Fax: 86-769-7312821 Email: [email protected]

LITE-ON Technology Corp. FCC ID.: PPQ-SWS003 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 Tel : 86-769-7312821 Federal Communications Commission Dec. 04, 2013 Authorization and Evaluation Division ATTESTATION FCC ID: PPQ-SWS003 Product: ASUS Miracast dongle Model: 90XB01F0-BEX000 / 90XB01F0-BEX010 / 90XB01F0-BEX020 / 90XB01F0- BEX030 / 90XB01F0-BEX040 / 90XB01F0-BEX050 / 90XB01F0-BEX060 / 90XB01F0- BEX070 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ------------------------------------------------------ TC Wu / Deputy Director(R & D Division) LITE-ON Technology Corp.

LITE-ON Technology Corp. 4F, No.90, Chien 1 Rd., Chung-Ho, Taipei Hsien, Taiwan, 235 Request for Confidentiality Date: 4 day of Dec, 2013 Subject: Confidentiality Request for: FCC ID: PPQ-SWS003 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ LITE-ON Technology Corp. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ TC Wu (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

LITE-ON Technology Corp. 4F, No.90, Chien 1 Rd., Chung-Ho, Taipei Hsien, Taiwan, 235 Authority to Act as Agent Date: 4 day of Dec, 2013 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: LITE-ON Technology Corp. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: By: __________________________ TC Wu (Signature 1 ) (Print name) Title: Deputy Director(R & D Division) On behalf of: LITE-ON Technology Corp. (Company Name) Telephone: 86-769-7312821 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

LITE-ON Technology Corp. 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 TEL No: 86-769-7312821 FAX No: 86-769-7312821 DTS-UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID : PPQ-SWS003 and IC : 4491A-SWS003 (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 2412-2462 Yes , No Yes , No Yes , No Yes , No 5745-5825 Yes , No Yes , No Yes , No Yes , No 5755-5795 Yes , No Yes , No Yes , No Yes , No 5180-5240 Yes , No Yes , No Yes , No Yes , No 5190-5230 Yes , No Yes , No Yes , No Yes , No This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. If you have any questions please do not hesitate to contact us. Signature ---------------------------------------------------------------------------------------------------------- TC Wu / Deputy Director(R & D Division) LITE-ON Technology Corp. Tel: 86-769-7312821 Fax: 86-769-7312821 Email: [email protected]

Report No.: 138468R-RFUSP28V01 Page : 1 of 12 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

LITE-ON Technology Corp. FCC ID.: PPQ-SWS003 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 Tel : 86-769-7312821 FCC ID Label

LITE-ON Technology Corp. FCC ID.: PPQ-SWS003 4F, No.90, Chien 1 Rd., Chung-Ho, New Taipei City, Taiwan, 235 Tel : 86-769-7312821 The FCC ID Label will be placed on the equipment as shown in the photograph below.

Report No.: 138468R-RFUSP28V01 Page : 2 of 12 (3) EUT Photo (4) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 3 of 12 (5) EUT Photo (6) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 4 of 12 (7) EUT Photo (8) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 5 of 12 (9) EUT Photo (10) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 6 of 12 (11) EUT Photo (12) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 7 of 12 (13) EUT Photo (14) EUT Photo Antenna WLAN Chip Report No.: 138468R-RFUSP28V01 Page : 8 of 12 (15) EUT Photo (16) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 9 of 12 (17) EUT Photo (18) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 10 of 12 (19) EUT Photo (20) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 11 of 12 (21) EUT Photo (22) EUT Photo Report No.: 138468R-RFUSP28V01 Page : 12 of 12 (23) EUT Photo

Report No. 138468R-RFUSP31V01 Page: 1 of 3 RF Exposure Evaluation declaration Product Name ASUS Miracast dongle Model No. 90XB01F0-BEX000 / 90XB01F0-BEX010 / 90XB01F0-BEX020 / 90XB01F0-BEX030 / 90XB01F0-BEX040 / 90XB01F0-BEX050 / 90XB01F0-BEX060 / 90XB01F0-BEX070 FCC ID PPQ-SWS003 Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. Date of Receipt Aug. 23, 2013 Date of Declaration Nov. 15, 2013 Report No. 138468R-RFUSP31V01 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF any agency of the U.S. Government Report No. 138468R-RFUSP31V01 Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 138468R-RFUSP31V01 Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product : ASUS Miracast dongle Test Item : RF Exposure Evaluation Test Site : No.3 OATS Operation Frequency 2412-2462MHz 5745-5825MHz, 5755-5795MHz 5180-5240MHz, 5190-5230MHz Maximum Conducted output power 25.08dBm Antenna gain 3.77dBi Output Power Into Antenna & RF Exposure Evaluation Distance: Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 322.1069 0.152662 Power density in column 4 is much lower than the limit (1 mW/cm 2 ).

Report No. 138468R-RFUSP28V01 Page : 1 of 130 FCC Test Report Product Name ASUS Miracast Dongle Model No 90XB01F0-BEX000 / 90XB01F0-BEX010 / 90XB01F0-BEX020 / 90XB01F0-BEX030 / 90XB01F0-BEX040 / 90XB01F0-BEX050 / 90XB01F0-BEX060 / 90XB01F0-BEX070 FCC ID. PPQ-SWS003 Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. Date of Receipt Aug. 23, 2013 Issue Date Oct. 16, 2013 Report No. 138468R-RFUSP28V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government. Report No. 138468R-RFUSP28V01 Page : 2 of 130 Test Report Certification Issue Date: Oct. 16, 2013 Report No.: 138468R-RFUSP28V01 Product Name ASUS Miracast Dongle Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. Manufacturer DONG GUAN G-COM COMPUTER CO., LTD. Model No. 90XB01F0-BEX000 / 90XB01F0-BEX010 / 90XB01F0-BEX020 / 90XB01F0-BEX030 / 90XB01F0-BEX040 / 90XB01F0-BEX050 / 90XB01F0-BEX060 / 90XB01F0-BEX070 EUT Rated Voltage DC 5V EUT Test Voltage AC 120V/60Hz Trade Name Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2003, ANSI C63.10: 2009, KDB 558074 Test Result Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government Documented By : ( Senior Adm. Specialist / Jinn Chen ) Tested By : ( Engineer / Andy Lin ) Approved By : ( Manager / Vincent Lin) Report No. 138468R-RFUSP28V01 Page : 3 of 130 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................8 1.3. Tested System Details....................................................................................................................9 1.4. Configuration of Tested System ....................................................................................................9 1.5. EUT Exercise Software ...............................................................................................................10 1.6. Test Facility .................................................................................................................................11 2. Conducted Emission..................................................................................................................12 2.1. Test Equipment............................................................................................................................12 2.2. Test Setup ....................................................................................................................................12 2.3. Limits ..........................................................................................................................................13 2.4. Test Procedure .............................................................................................................................13 2.5. Uncertainty ..................................................................................................................................13 2.6. Test Result of Conducted Emission.............................................................................................14 3. Peak Power Output ...................................................................................................................20 3.1. Test Equipment............................................................................................................................20 3.2. Test Setup ....................................................................................................................................20 3.3. Limits ..........................................................................................................................................20 3.4. Test Procedure .............................................................................................................................20 3.5. Uncertainty ..................................................................................................................................20 3.6. Test Result of Peak Power Output...............................................................................................21 4. Radiated Emission .....................................................................................................................27 4.1. Test Equipment............................................................................................................................27 4.2. Test Setup ....................................................................................................................................28 4.3. Limits ..........................................................................................................................................29 4.4. Test Procedure .............................................................................................................................30 4.5. Uncertainty ..................................................................................................................................30 4.6. Test Result of Radiated Emission................................................................................................31 5. RF antenna conducted test.............................…

Text truncated - open the document above for the full version.

Report No.: 138468R-RFUSP28V01 Page : 1 of 6 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 138468R-RFUSP28V01 Page : 2 of 6 Front View of Conducted Test – Adapter Mode Back View of Conducted Test – Adapter Mode Report No.: 138468R-RFUSP28V01 Page : 3 of 6 Front View of Radiated Test Back View of Radiated Test Report No.: 138468R-RFUSP28V01 Page : 4 of 6 Front View of Radiated Test – Adapter Mode Back View of Radiated Test - Adapter Mode Report No.: 138468R-RFUSP28V01 Page : 5 of 6 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn) Report No.: 138468R-RFUSP28V01 Page : 6 of 6 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)