PPQ-WN4627R802.11b/g/n 2T2R Wireless LAN USB Module

Page 1/13 PRODUCT SPECIFICATION 802.11n, 2.4G 2T2R Wireless LAN USB Module WN4627R RT5372 Version 1.0 User Manual * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC Page 2/13 PRODUCT SPECIFICATION 802.11n, 2.4G 2T2R Wireless LAN USB Module WN4627R RT5372 Version 1.0 Networking B.U. Lite-on Technology Corporation 4F, No. 90, Chien I Rd., Chung Ho, New Taipei City 235, Taiwan, R.O.C. Phone: +886-2-2222-6181 Fax: +886-2-2221-5288 Contact: Product Marketing Mr. ML Wu #8266 E-mail: [email protected] Customer Approval: (Signature) (Title) (Company) (Date) (Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business) Page 3/13 CONTENT FCC WARING STATEMENT .......................................................................................................... 4 PRODUCT FEATURES .................................................................................................................... 5 PRODUCT SPECIFICATIONS ........................................................................................................ 6 MAIN CHIPSET ....................................................................................................................................... 6 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 6 PIN ASSIGMENT ............................................................................................................................... 8 USB CONNECTOR SPEC ................................................................................................................. 8 MECHANICAL .................................................................................................................................. 9 BLOCK DIAGRAM ........................................................................................................................... 9 ANTENNA SPEC ............................................................................................................................. 10 MODULE PHOTO ........................................................................................................................... 11 EEPROM INFORMATION ............................................................................................................ 11 ENVIRONMENTAL ........................................................................................................................ 11 OPERATING .......................................................................................................................................... 11 STORAGE .............................................................................................................................................. 11 PACKING DRAWING .................................................................................................................... 12 Page 4/13 FCC WARING STATEMENT FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Page 5/13 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: PPQ-WN4627R ” Inf ormation for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. PRODUCT FEATURES  Operate at ISM frequency Band (2.4GHz)  IEEE Standards Support, 802.11b, 802.11g and 802.11n  Support USB 2.0 host interface  Enterprise level security supporting: WPA, WPA2, TKIP, AES, WAPI  One-stream IEEE 802.11n support fo…

Text truncated - open the document above for the full version.

Lite-On Technology Corp.. 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. About WiFi Channels 12 ,13 &14 Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID : PPQ-WN4627R We client devices don't operating on Channels 12 , 13 and 14, when a master transmits on these channels. This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. Signature ---------------------------------------------------------------------------------------------------------- TC WU / Director Lite-On Technology Corp. Tel : 886-2-2222-6181 Fax: 886-2-2226-6749 Email: [email protected]

Lite-On Technology Corp. FCC ID.: PPQ-WN4627R 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C.Tel : 886-2-2222-6181 Federal Communications Commission Aug. 12, 2013 Authorization and Evaluation Division ATTESTATION FCC ID: PPQ-WN4627R Product: 802.11b/g/n 1T1R Wireless LAN USB Module We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, ------------------------------------------------------------------ TC WU / Director Lite-On Technology Corp.

Lite-On Technology Corp. FCC ID.: PPQ-WN4627R 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. Tel : 886-2-2222-6181 Lite-On Technology Corp. 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. Tel : 886-2-2222-6181 Fax: 886-2-2226-6749 Federal Communications Commission Aug. 12, 2013 Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Schematics: (WN4627R) Schem Block Diagram: (WN4627R) BlkDia Operational Description: (WN4627R) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, -------------------------------------------------------- TC WU / Director Lite-On Technology Corp.

RF_160, Issue 02 Lite-On Technology Corp. Declaration of Authorization We Name: Lite-On Technology Corp. Address: 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C. City: New Taipei . Country: Taiwan..  Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: 802.11b/g/n 2T2R Wireless LAN USB Module FCC ID: PPQ-WN4627R Trademark: LITE-ON on our behalf. Date: 2013/08/12.. City:  New Taipei .. Name:  TC WU .. (2) Function: Director Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Modular Approval Request FCC (per FCC 15.212) FCC ID: PPQ-WN4627R Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. The modular transmitter have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The EUT has buffered data inputs, it is integrated in chip: RT5372. 3. The modular transmitter must have its own power supply regulation. The EUT has regulators, it is integrated in chip: "AUR9713AGH/NI" and "RT5372". 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. The modular transmitter complies with the antenna requirements of Section 15.203 and 15.204(c). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The modular transmitter is tested in a stand-alone configuration. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please refer to the user manual instructions. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter complies with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The modular transmitter complies with any applicable RF exposure requirements. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): TC WU Date: Sep. 06, 2013 Signature:

Report No.: 138176R-RFUSP42V01 Page : 1 of 5 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 138176R-RFUSP42V01 Page : 2 of 5 (3) EUT Photo (4) EUT Photo

Lite-On Technology Corp. FCC ID.: PPQ-WN4627R 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C.Tel : 886-2-2222-6181 FCC ID Label

Lite-On Technology Corp. FCC ID.: PPQ-WN4627R 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C.Tel : 886-2-2222-6181 The FCC ID and will be placed on the equipment as shown in the photograph below.

Report No.: 138176R-RFUSP42V01 Page : 3 of 5 (5) EUT Photo (Antenna: Auden) (6) EUT Photo (Antenna: Auden) Report No.: 138176R-RFUSP42V01 Page : 4 of 5 (7) (Antenna: HONG LIN) (8) EUT Photo Report No.: 138176R-RFUSP42V01 Page : 5 of 5 (9) EUT Photo (10) EUT Photo

Report No. 138176R-RFUSP42V01 Page: 1 of 3 RF Exposure Evaluation declaration Product Name 802.11b/g/n 2T2R Wireless LAN USB Module Model No. WN4627R FCC ID PPQ-WN4627R Applicant Lite-On Technology Corp. Address 4F, 90, Chien 1 Road, Chung Ho, New Taipei City 235, Taiwan, R.O.C.C Date of Receipt Aug. 07, 2013 Date of DeclarationAug. 12, 2013 Report No. 138176R-RFUSP42V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by TAF or any agency of the U.S. Government Report No. 138176R-RFUSP42V01 Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 138176R-RFUSP42V01 Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product : 802.11b/g/n 2T2R Wireless LAN USB Module Test Item : RF Exposure Evaluation Test Site : No.3 OATS (Antenna: Auden) Output Power Into Antenna & RF Exposure Evaluation Distance (5.44dBi): Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 457.0882 0.318222 Power density in column 4 is much lower than the limit (1 mW/cm2).

Report No. 138176R-RFUSP42V01 Page : 89 of 169 Product : 802.11b/g/n 2T2R Wireless LAN USB Module Test Item : RF Antenna Conducted Spurious Test Site : No.3 OATS Test Mode : Mode 4: Transmit (802.11n MCS8 30Mbps 40M-BW) Channel 01 (2422MHz) – Chain A Report No. 138176R-RFUSP42V01 Page : 90 of 169 Report No. 138176R-RFUSP42V01 Page : 91 of 169 Report No. 138176R-RFUSP42V01 Page : 92 of 169 Report No. 138176R-RFUSP42V01 Page : 93 of 169 Channel 01 (2422MHz) – Chain B Report No. 138176R-RFUSP42V01 Page : 94 of 169 Report No. 138176R-RFUSP42V01 Page : 95 of 169 Report No. 138176R-RFUSP42V01 Page : 96 of 169 Report No. 138176R-RFUSP42V01 Page : 97 of 169 Channel 04 (2437MHz) – Chain A Report No. 138176R-RFUSP42V01 Page : 98 of 169 Report No. 138176R-RFUSP42V01 Page : 99 of 169 Report No. 138176R-RFUSP42V01 Page : 100 of 169 Report No. 138176R-RFUSP42V01 Page : 101 of 169 Channel 04 (2437MHz) – Chain B Report No. 138176R-RFUSP42V01 Page : 102 of 169 Report No. 138176R-RFUSP42V01 Page : 103 of 169 Report No. 138176R-RFUSP42V01 Page : 104 of 169 Report No. 138176R-RFUSP42V01 Page : 105 of 169 Channel 07 (2452MHz) – Chain A Report No. 138176R-RFUSP42V01 Page : 106 of 169 Report No. 138176R-RFUSP42V01 Page : 107 of 169 Report No. 138176R-RFUSP42V01 Page : 108 of 169 Report No. 138176R-RFUSP42V01 Page : 109 of 169 Channel 07 (2452MHz) – Chain B Report No. 138176R-RFUSP42V01 Page : 110 of 169 Report No. 138176R-RFUSP42V01 Page : 111 of 169 Report No. 138176R-RFUSP42V01 Page : 112 of 169 Report No. 138176R-RFUSP42V01 Page : 113 of 169 6. Band Edge 6.1. Test Equipment RF Radiated Measurement: The following test equipments are used during the band edge tests: Test Site Equipment Manufacturer Model No./Serial No. Last Cal. Bilog Antenna Schaffner Chase CBL6112B/2673 Sep., 2012 X Horn Antenna Schwarzbeck BBHA9120D/D305 Sep., 2012 Horn Antenna Schwarzbeck BBHA9170/208 Jul., 2013 X Pre-Amplifier Agilent 8447D/2944A09549 Sep., 2012 X Spectrum Analyzer Agilent E4407B / US39440758 May, 2013 Test Receiver R & S ESCS 30/ 825442/018 Sep., 2012 X Coaxial Cable QuieTek QTK-CABLE/ CAB5 Feb., 2013 X Controller QuieTek QTK-CONTROLLER/ CTRL3 N/A Site # 3 X Coaxial Switch Anritsu MP59B/6200265729 N/A Note: 1. All instruments are calibrated every one year. 2. The test instruments marked by “X” are used to measure the final test results. 6.2. Test Setup RF Radiated Measurement: EUT FRP Dome The height of broad band or Dipole Antenna was scanned from 1M to 4M. The distance between antenna and turn table was 3M regards to the standard ado pted. 3m 80cm To Receiver Pre- Amplifier Report No. 138176R-RFUSP42V01 Page : 114 of 169 6.3. Limits Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 20dB below the level of the fundamental or to the general radiated emission limits in paragraph 15.209, whichever is the lesser attenuation. 6.4. Test Procedure The EUT was setup according to ANSI C63.10: 2009 and tested according to DTS test procedure of KDB558074 for compliance to FCC 47CFR 15.247 requirements. The EUT is placed on a turn table which is 0.8 meter above ground. The turn table is rotated 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3 meters. The antenna is scanned from 1 meter to 4 meters to find out the maximum emission level. This is repeated for both horizontal and vertical polarization of the antenna. In order to find the maximum emission, all of the interface cables were manipulated according to ANSI C63.10: 2009 on radiated measurement. 6.5. Uncertainty ± 3.9 dB above 1GHz ± 3.8 dB below 1GHz Report No. 138176R-RFUSP42V01 Page : 115 of 169 6.6. Test Result of Band Edge Product : 802.11b/g/n 2T2R Wireless LAN USB Module Test Item : Band Edge Data Test Site : No.3 OATS Test Mode : Mode 1: Transmit (802.11b 1Mbps) RF Radiated Measurement (Horizontal): Channel No. Frequency (MHz) Correct Factor (dB) Reading Level (dBuV) Emission Level (dBuV/m) Peak Limit (dBuV/m) Average Limit (dBuV/m) Result 01 (Peak) 2388.000 33.737 25.108 58.845 74.000 54.000 Pass 01 (Peak) 2390.000 33.739 24.097 57.836 74.000 54.000 Pass 01 (Peak) 2413.000 33.775 73.823 107.597 -- -- -- 01 (Average) 2390.000 33.739 14.149 47.888 74.000 54.000 Pass 01 (Average) 2414.800 33.778 70.108 103.887 -- -- -- Figure Channel 01: Horizontal (Peak) Figure Channel 01: Horizontal (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. Report No. 138176R-RFUSP42V01 Page : 116 of 169 Product : 802.11b/g/n 2T2R Wireless LAN USB Module Test Item : Band Edge Data Test Site : No.3 OATS Test Mode : Mode 1: Transmit (802.11b 1Mbps) RF Radiated Measurement (Vertical): Channel No. Frequency (MHz) Correct Factor (dB) Reading Level (dBuV) Emission Level (dBuV/m) Peak Limit (dBuV/m) Average Limit (dBuV/m) Result 01 (Peak) 2362.600 32.459 24.835 57.295 74.000 54.000 Pass 01 (Peak) 2390.000 32.267 22.670 54.937 74.000 54.000 Pass 01 (Peak) 2413.000 32.254 64.153 96.406 -- -- -- 01 (Average) 2390.000 32.267 13.140 45.407 74.000 54.000 Pass 01 (Average) 2411.200 32.245 60.453 92.698 -- -- -- Figure Channel 01: Vertical (Peak) Figure Channel 01: Vertical (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed …

Text truncated - open the document above for the full version.

Report No.: 138176R-RFUSP42V01 Page : 1 of 4 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 138176R-RFUSP42V01 Page : 2 of 4 Front View of Radiated Test Back View of Radiated Test Report No.: 138176R-RFUSP42V01 Page : 3 of 4 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn) Report No.: 138176R-RFUSP42V01 Page : 4 of 4 EUT & Test Fixture