PWOBD800NBAmplifier Repeater

Rev 1.1 4/15/2002 USER’S GUIDE FOR THE IDEN IN BUILDING BI-DIRECTIONAL AMPLIFER/REPEATER MODEL: BD800NB Rev 1.1 PAGE 2 The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties which may result from its use. WARNING: A lightning rod should be added if the outside antenna is in any danger of being hit by lightning. FCC ID: PWOBD800NB Copyright © 2002 Wilson Electronics, Inc. Rev 1.1 PAGE 3 1. PACKAGE CONTENTS 1.1 Amplifier/Repeater 1.2 AC-to-DC Transformer 1.3 Antennas: 800MHz Magnet Mount (outside), Short 800MHz Magnet (inside) 1.4 2 N-Male To FME-Male Adapters 2. OPTIONAL ACCESSORIES 2.1 RF Splitter 2.2 Coax Cable Extensions 50 Ω

Power is factory set

Page 1 of 77 Report No.: FC02-027 WILSON ELECTRONICS TEST REPORT FOR THE AMPLIFIER REPEATER, DBAMP8N FCC PART 90 AND FCC PART 15 SUBPART B SECTIONS 15.107 AND 15.109 CLASS B COMPLIANCE DATE OF ISSUE: FEBRUARY 25, 2002 PREPARED FOR: Wilson Electronics 3301 East Deseret Drive St. George, UT 84790 PREPARED BY: Mary Ellen Clayton CKC Laboratories, Inc. 5473A Clouds Rest Mariposa, CA 95338 W.O. No.: 78395Date of test: February 15-21, 2002 Report No.: FC02-027 This report contains a total of 77 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. The results in this report apply only to the items tested, as identified herein. Page 2 of 77 Report No.: FC02-027 TABLE OF CONTENTS Administrative Information ............................................................................................. 3 Summary of Results......................................................................................................... 4 Conditions for Compliance.............................................................................................. 4 Approvals......................................................................................................................... 4 Equipment Under Test (EUT) Description...................................................................... 5 Equipment Under Test..................................................................................................... 5 Peripheral Devices ........................................................................................................... 5 Temperature and Humidity During Testing .................................................................... 5 2.1033(c)(3) User’s Manual ............................................................................................ 6 2.1033(c)(4) Type of Emissions ...................................................................................... 6 2.1033(c)(5) Frequency Range ........................................................................................ 6 2.1033(c)(6) Operating Power ......................................................................................... 6 2.1033(c)(7) Maximum Power Rating............................................................................. 6 2.1033(c)(8) DC Voltages ............................................................................................... 6 2.1033(c)(9) Tune-Up Procedure .................................................................................... 6 2.1033(c)(10) Schematics and Circuitry Description ...................................................... 6 2.1033(c)(11) Label and Placement................................................................................. 6 2.1033(c)(12) Submittal Photos....................................................................................... 6 2.1033(c)(13) Modulation Information ........................................................................... 6 2.1033(c)(14)/2.1046/90.205 - RF Power Output .......................................................... 7 2.1033(c)(14)/2.1047(b) - Modulation Characteristics - Audio Frequency Response .... 25 2.1033(c)(14)/2.1047(b) - Modulation Characteristics - Modulation Limiting Response . 25 2.1033(c)(14)/2.1049(i)/90.210/90.691 - Occupied Bandwidth...................................... 26 2.1033(c)(14)/2.1051/90.210(i)/90.691 - Spurious Emissions at Antenna Terminal ...... 34 2.1033(c)(14)/2.1053/90.210(i)/90.691 - Field Strength of Spurious Radiation............. 61 2.1033(c)(14)/2.1055/90.213 - Frequency Stability ........................................................ 68 15.107 – AC Conducted Emissions – Receiver/Digital .................................................. 68 15.109 – Radiated Emissions – Receiver/Digital ............................................................ 75 Page 3 of 77 Report No.: FC02-027 CKC Laboratories, Inc. has received Certificates of Accreditation from the following agencies: A2LA (USA); BSMI (Taiwan); Nemko (Norway); and GOST (Russia). CKC Laboratories, Inc has received test site Registration Acceptance from the following agencies: FCC (USA); VCCI (Japan); and Industry Canada. CKC Laboratories, Inc. has received Letters of Acceptance through an MRA for the following agencies: ACA/NATA (Australia); SABS (South Africa); SWEDAC (Sweden); Radio Communications Agency (RA); HOKLAS (Hong Kong); Bakom (Swiss); BIPT (Belgium); Denmark Telestyrelsen; RvA (Netherlands); SEE (Luxembourg) SITTEL (Bolivia); and UKAS (UK). ADMINISTRATIVE INFORMATION DATE OF TEST: February 15-21, 2002 DATE OF RECEIPT: February 15, 2002 PURPOSE OF TEST: To demonstrate the compliance of the Amplifier Repeater, DBAMP8N with the requirements for FCC Part 15 Subpart B Sections 15.107 and 15.109 Class B and FCC Part 90 devices. TEST METHOD: ANSI C63.4 (1992), FCC Part 90 and TIA/EIA 603 FREQUENCY RANGE TESTED: 9 kHz – 10 GHz MANUFACTURER: Wilson Electronics 3301 East Deseret Drive St. George, UT 84790 REPRESENTATIVE: Jim Wilson TEST LOCATION: CKC Laboratories, Inc. 5473A Clouds Rest Mariposa, CA 95338 Page 4 of 77 Report No.: FC02-027 SUMMARY OF RESULTS As received, the Wilson Electronics Amplifier Repeater, DBAMP8N was found to be fully compliant with the following standards and specifications: United States ! FCC Part 90 Subpart I ! TIA/EIA 603 ! FCC Part 15 Subpart B Sections 15.107 & 15.109 Class B ! ANSI C63.4 (1992) method CONDITIONS FOR COMPLIANCE No modifications to the EUT were necessary to comply. APPROVALS QUALITY ASSURANCE:TEST PERSONNEL: Dennis Ward, Quality ManagerRandy Clark, EMC Engineer Chuck Kendall, EMC/Lab Manager Page 5 of 77 Report No.: FC02-027 EQUIPMENT UNDER TEST (EUT) DESCRIPTION The EUT tested by CKC Laboratories was representative of a production unit. The EUT is a 50dB bi-directional amplifier repeater for NEXT TEL phone system. The system consists of a mobile unit and removable antennas. The…

Text truncated - open the document above for the full version.

Antenna Direct Connect Phone Direct Connect Intermodulation Antenna Field Strength - Front View Antenna Field Strength - Back View Antenna Field Strength - Back Close-up View Phone Field Strength - Front View Phone Field Strength - Back View Phone Radiated Emissions - Back Close-up View Mains Conducted Emissions - Front View - 15.107 Mains Conducted Emissions - Side View - 15.107 Radiated Emissions - Front View - 15.109 Radiated Emissions - Back View - 15.109