PXK-HT1072Adventure Box

PN:HT1072 User's Manual Thank you for purchasing our Adventure Box Read carefully and follow all instructions in this User's Manual before you use the Adventure Box. Keep this User's Manual in a convenient locatio for future reference Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: Always position the unit on a stable and level surface. Unstable surface can cause the unit to topple and fall, resulting in possible damage or injury Do not drop, unpack, open, beat, curve, prink and burn the unit Avoid using the unit nearby basins or sinks where it may come in contact with water Do not place any ware with full water on the top of the unit, such as vase, glass, pot, and please avoid placing candle on the speaker surface as well Protect the using of the unit from any overheating devices (such as radiator, heating installation, cooking stove or other heating devices) Regardless of what reasons cause the unit damage, please ask for the maintenance personnel to repair If you want to do the cleaning, please turn off the unit and unplug the power cable from the outlet first Set the volume properly to prevent injury to the unit and your health Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. No naked flame sources, such as lighted candles, should be placed on the apparatus. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Package Contents 1. Adventure Box x 1 2. Micro USB charging cable x 1 3. 3.5 mm AUX cable x 1 4. User's manual x 1 5. Carabiner x1 6.Handstrap × 1 Fit Models Apply to：all iPhone and iPad series, Samsung smart phones, Tablets and other Bluetooth devices Work with any device with standard 3.5mm earphone jack via the included Aux cable for connecting, such as MP3,PSP, Mobile phone...,etc Outstanding Features Adventure Box is compatible with all wireless Bluetooth devices such as iPhone, iPad, Samsung smartphones, Tablets and other Bluetooth devices. It is portable, wireless, hands-free. Just place it anywhere in a room and enjoy pristine streaming audio from your phone, computer, or other Bluetooth devices. Bring music, movies, and all your mobile audio vibrantly to life--all in the palm of your hand Go Anywhere and Go Wireless Easily connects with mobile phones, computers, tablets, iPods or any other Bluetooth device Wireless working range is up to 8 meters, no cords, hassle-free. Calling and Conference on the Go With a powerful, built-in microphone, it can frees you to share clean-sounding conference calls or personal calling anywhere--in the office, car, at home, alone, or with a group, even outdoor. User-friendly Built-in rechargeable battery, up to 5 hours of continuous play Unique outlook and function design Unique ball shape outlook, with rubber case, expressing you sport vitality. Compact size, ideal for travel and mobility. LINE IN, to play with almost any audio device. Water resistance design; enable outdoor application for your trip, mountain, forest trip, adventure etc. Part Names Main unit 1 Hole 2 Volume – 3 Charging indicator 4 Volume + 5 Multi-function button (play/pause button & answer key) 6 Bluetooth indicator 7 ON/OFF Button 8 Line in 9 USB charging port 10 Microphone 11 Back Cover 1 2 3 4 5 6 7 8 9 10 11 Basic Operation Power on/power off 1 Take off back cover 2 Power on the unit: slide the ON/OFF button to turn on the unit, the Bluetooth indicator lights up at once 3 Power off the unit: slide the ON/OFF button again to turn off the unit, the Bluetooth indicator goes out in the meanwhile. Connection 1. Work with phone Power on the unit, and coming with a short Bluetooth hint sound form the unit, the Bluetooth function is on, the Bluetooth indicator lights up at the same time, these show the unit is enter pairing mode. Turn on the Bluetooth function in your phone, and search the Bluetooth device, then, your phone will find the device named “BIJELA HT1072”, click and with a short Bluetooth hint sound come from the unit, that remind you it has been paired successfully. 2. Work with tablet PC Please refer to the above phone connection operation steps. 3. Work with laptop/ notebook computer /PC As the Bluetooth version for laptop/ notebook computer /PC is various, the connection methods are different as well, if you cannot connect with the unit for play on first use, you may need to install a new version of the Bluetooth driver in your laptop in advance. Please reference the instructions of laptop for details. Play mode 1. Bluetooth mode: Play the audio signal from Bluetooth device connected with the unit. 2. AUX mode: Play the audio signal from the audio device with “AUX” port. Note: As long as the Aux cable is connected to the speaker, it will not play the music from Bluetooth Play the music Play the audio signal from Bluetooth device 1. Follow the above connection steps to pair the Bluetooth device and the unit. 2. Enter in the Bluetooth device audio play menu, choose your favorite music Model Name：HT1072 Power Supply: Micro USB Built-in Lithium Ion batteries: 1400mAh,3.7V Touch the volume button on the unit or control the audio device volume directly to adjust the volume Hands free function 1. The unit will play ringtone when there is a incoming call 2. At this time, press the multi-…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 4.0 ECORE TECHNOLOGY COMPANY LIMITED (2014-08-19) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, ____ ECORE TECHNOLOGY COMPANY LIMITED _____hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product Adventure Box ( M/N: HT1072) Sincerely, Liuchengliu Manager ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou city, Hubei Province, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 ECORE TECHNOLOGY COMPANY LIMITED (2014-08-19) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: PXK-HT1072 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Liuchengliu Manager ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou city, Hubei Province, China

Label Location on EUT

Antenna

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID：PXK-HT1072 EUT Specification EUT Adventure Box Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power -2.55dBm(0.000556W) Antenna gain (Max) 0 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result Channel Frequency (MHz) Output Peak power (mW) Antenna Gain (dBi) Antenna Gain (numeric) Power density at 20cm (mW/ cm2 ) Power density Limits (mW/cm 2 ) 2402 0.556 0 1 0.0001106 1 2441 0.502 0 1 0.0000999 1 2480 0.460 0 1 0.0000915 1 2402 0.513 0 1 0.0001021 1 2441 0.349 0 1 0.0000694 1 2480 0.288 0 1 0.0000573 1 2402 0.456 0 1 0.0000907 1 2441 0.283 0 1 0.0000563 1 2480 0.308 0 1 0.0000613 1 Signature Liuchengliu ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou, Hubei, China

TRF No. FCC Part 15.247/A Page 1 of 64 Report No. KAD140808048E Ver.1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Adventure Box Model No.: HT1072 Trade Mark: FCC ID: PXK-HT1072 Report No.: KAD140808048E Issue Date: August 18, 2014 Prepared for ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou city, Hubei Province, China Prepared by DONGGUAN EMTEK CO., LTD. No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 TRF No. FCC Part 15.247/A Page 2 of 64 Report No. KAD140808048E Ver.1.0 VERIFICATION OF COMPLIANCE Applicant: ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou city, Hubei Province, China Manufacturer: ECORE TECHNOLOGY COMPANY LIMITED North of Bingang East Road, Huahu Development Zone, Ezhou city, Hubei Province, China Product Description: Adventure Box Trade Mark: Model Number: HT1072 Kind of Device: Bluetooth Ver. 3.0+EDR File Number: KAD140808048E Date of Test: August 08, 2014 to August 18, 2014 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. and SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2013). The test results of this report relate only to the tested sample identified in this report. Approved By Sam Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. TRF No. FCC Part 15.247/A Page 3 of 64 Report No. KAD140808048E Ver.1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / KAD140808048E TRF No. FCC Part 15.247/A Page 4 of 64 Report No. KAD140808048E Ver.1.0 Table of Contents 1. GENERAL INFORMATION ....................................................................................... 6 1.1 PRODUCT DESCRIPTION............................................................................................................... 6 1.2 RELATED SUBMITTAL(S) / GRANT (S) ............................................................................................ 6 1.3 TEST METHODOLOGY .................................................................................................................. 6 1.4 SPECIAL ACCESSORIES ................................................................................................................ 6 1.5 EQUIPMENT MODIFICATIONS ........................................................................................................ 7 1.6 TEST FACILITY ............................................................................................................................. 7 2. SYSTEM TEST CONFIGURATION ........................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................ 8 2.3 TEST PROCEDURE ....................................................................................................................... 8 2.4 LIMITATION .................................................................................................................................. 9 2.5 CONFIGURATION OF TESTED SYSTEM ........................................................................................ 12 3. SUMMARY OF TEST RESULTS ............................................................................. 13 4. DESCRIPTION OF TEST MODES ........................................................................... 14 5. CONDUCTED EMISSIONS TEST ........................................................................... 15 5.1 MEASUREMENT PROCEDURE: .................................................................................................... 15 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 15 5.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 15 5.4 MEASUREMENT RESULT: ............................................................................................................ 15 5.5 CONDUCTED MEASUREMENT PHOTOS: ...................................................................................... 18 6. RADIATED EMISSION TEST .................................................................................. 19 6.1 MEASUREMENT PROCEDURE ..................................................................................................... 19 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 20 6.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 21 6.4 MEASUREMENT RESULT ............................................................................................................. 21 6.5 RADIATED MEASUREMENT PHOTOS: ........................................................................................... 28 7. CHANNEL SEPARATION TEST ............................................................................. 29 7.1 MEASUREMENT PROCEDURE ..................................................................................................... 29 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 29 7.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 29 7.4 MEASUREMENT RESULTS: .......................................…

Text truncated - open the document above for the full version.