Q3QIWM3945ABGMotion Computing Tablet PC LE1700 (Model T006)

Motion™ LE1700 Tablet PC User’s Guide Windows XP Tablet PC Edition 2005 DRAFT © 2006 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document may be reproduced in any form without written consent from Motion. The information in this document is provided “as is” and is subject to change without notice. Motion is not liable for errors or omissions in this document. Motion, Motion Computing, Speak Anywhere, and View Anywhere are trademarks or registered trademarks of Motion Computing, Inc. in the U.S.A. and other countries. Acrobat is a registered trademark of Adobe Systems Incorporated. Atheros. the Atheros logo, Super G, Super A/G, Wake- on-Wireless, and Wake-on-Theft are registered trademarks of Atheros Communications, Inc. AuthenTec is a registered trademark of AuthenTec, Inc. Bluetooth is a registered trademark owned by the Bluetooth SIG, Inc., U.S.A. and licensed to Motion Computing, Inc. Intel, Intel Inside, the Intel Inside logo, Pentium, Centrino, and PROSet are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Knowles and IntelliSonic are trademarks or registered trademarks of Knowles Acoustics, Inc. Microsoft Windows, Windows XP, Windows XP Tablet PC Edition, and Windows Journal are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. OmniPass is a trademark of Softex, Inc. Realtek is a trademark of Realtek Semiconductor Corporation. SigmaTel is a registered trademark and Universal Jacks is a trademark of SigmaTel Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. End users may not loan, rent, lease, lend, or otherwise transfer the CDs or DVDs provided for recovery purposes to another user, except as permitted in the End User License Agreement for such product. This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovision's copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited. Motion Computing, Inc. has made every effort to identify trademarked properties and owners on this page. All brands and product names used in this document are for identification purposes only and may be trademarks or registered trademarks of their respective companies. The warranties for Motion products are set forth in the express limited warranty statements accompanying such products. Nothing in this document constitutes an additional warranty. The Motion Computing products and services may be covered by one or more patent-protected inventions. Additional patents may also be pending. For more information, see www.motioncomputing.com/info/patents.asp. PN 024-02-0118 Revision X00 March 2007 iii Contents Chapter 1Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Finding information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting up the LE1700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 2Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 WriteTouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Status lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Windows Security button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 View Anywhere display (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ambient light sensor (ALS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Accelerometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Infrared (IrDA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 USB 2.0 ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Headphones port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Microphone port . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Confidential Authorization Date: May 17, 2007 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality for certification of FCC ID: Q3QIWM3945ABG To: whom it may concern, We Motion Computing Incorporated hereby requests permanent confidential treatment for the following materials submitted in support of FCC certification application for FCC ID# Q3QIWM3945ABG. Product Name: LE1700 Model #: T006 Sincerely Yours, Signature: Typed or Printed Name: Don A. Bobo Title: International Regulatory Engineer Company Name: Motion Computing Incorporated Form 05

Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 52 of 63 FCC Part 15.247 Test Report EXHIBIT C - EUT PHOTOGRAPHS EUT – Top View EUT – Bottom View Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 53 of 63 FCC Part 15.247 Test Report EUT – Right side view EUT – side view Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 54 of 63 FCC Part 15.247 Test Report EUT – Right side view with WWAN external antenna extended EUT – WLAN, WWAN location cover off

Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 48 of 63 FCC Part 15.247 Test Report EXHIBIT A - FCC ID LABEL INFORMATION FCC § 2.925 Identification of equipment (a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing the following: (1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be legible without the aid of magnification. Example: FCC ID XXX123. XXX—Grantee Code 123—Equipment Product Code ID Label Requirements as per FCC § 15.19 (a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or verification shall be labeled as follows: (3) All other devices shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device. Proposed FCC ID Label Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 49 of 63 FCC Part 15.247 Test Report Proposed Label Location on EUT As per FCC §15.17 (b)(4), the label shall not be a stick-on, paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase, as described in Section 2.925(d) of this chapter. "Permanently affixed" means that the label is etched, engraved, stamped, silk-screened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable.

Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 55 of 63 FCC Part 15.247 Test Report RF Module – component view with FCC label d RF Module – solder view with FCC label Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 56 of 63 FCC Part 15.247 Test Report RF Module –component view with shield On RF Module – component view with shield Off Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 57 of 63 FCC Part 15.247 Test Report RF Module – solder view EUT – Top bezel internal view/LCD Digitizer Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 58 of 63 FCC Part 15.247 Test Report EUT – LCD without top view Digitizer EUT – Main Antenna Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 59 of 63 FCC Part 15.247 Test Report EUT – AUX antenna EUT – Aux (Bottom) location Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 60 of 63 FCC Part 15.247 Test Report EUT – Bottom bezel internal view EUT – Mother board top view Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 61 of 63 FCC Part 15.247 Test Report EUT – Mother board bottom view EUT – Battery top view Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 62 of 63 FCC Part 15.247 Test Report EUT – Battery bottom view AC Adaptor (Top View) Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 63 of 63 FCC Part 15.247 Test Report AC Adaptor (Bottom View) END OF REPORT

2 Since 1981 17 Bentley Avenue, Ottawa Ontario, K2E-6T7 © 2005 APREL Laboratories E.& O.E. www.aprel.com [email protected] Phone (613) 820-2730 Fax (613) 820-4161 SAR & HAC Instruments for Wireless • Consulting • Research • Standards • Compliance • Training Project number: Intel-FCC-5269 FCC ID: Q3QIWM3945ABG This report shall not be reproduced, except in full, without written approval of APREL Laboratories Table of Contents 1.0Introduction ....................................................................................................................... 3 2.0Applicable Documents ..................................................................................................... 6 3.0ALSAS-10U System Description ..................................................................................... 7 3.1Applications ...................................................................................................................... 8 3.2Visualisation and reporting ............................................................................................. 8 3.3Field scans ........................................................................................................................ 8 3.3.1Area Scans .................................................................................................................... 8 3.3.2Zoom Scan (Cube Scan Averaging) ........................................................................... 9 3.4Operator settings.............................................................................................................. 9 3.5ALSAS-10U Interpolation and Extrapolation Uncertainty ............................................ 9 4.0ALSAS-10U Hardware .................................................................................................... 10 4.1Isotropic E-Field Probe .................................................................................................. 10 4.2Isotropic E-Field Probe Specification........................................................................... 11 4.3Boundary Detection Unit and Probe Mounting Device ............................................... 11 4.4Daq-Paq (Analog to Digital Electronics)....................................................................... 11 4.5Axis Articulated Robot ................................................................................................... 12 4.6ALSAS Universal Workstation ...................................................................................... 12 4.7Universal Device Positioner .......................................................................................... 13 4.8Phantom Types ...............................................................................................................14 4.8.1APREL SAM Phantoms.............................................................................................. 14 4.8.2APREL Laboratories Universal Phantom................................................................. 15 4.9Validation Dipoles...........................................................................................................16 5.0Tissue Simulation Fluid ................................................................................................. 17 5.1Tissue Calibration Procedure Using a Coaxial Probe ................................................ 18 5.2Tissue Calibration Results ............................................................................................ 18 6.0System Validation...........................................................................................................19 6.1Experimental Results Summary.................................................................................... 20 6.2SAR Measurement Procedure ....................................................................................... 20 6.3SAR Exposure Limits ..................................................................................................... 20 6.4Equipment List ................................................................................................................22 6.5SAR Measurement Results ............................................................................................ 23 Appendix A SAR Plots ................................................................................................................ 35 Appendix B Calibration Reports 3 Since 1981 17 Bentley Avenue, Ottawa Ontario, K2E-6T7 © 2005 APREL Laboratories E.& O.E. www.aprel.com [email protected] Phone (613) 820-2730 Fax (613) 820-4161 SAR & HAC Instruments for Wireless • Consulting • Research • Standards • Compliance • Training Project number: Intel-FCC-5269 FCC ID: Q3QIWM3945ABG This report shall not be reproduced, except in full, without written approval of APREL Laboratories 1.0 Introduction Tests were conducted at APREL Laboratories within the ISO 17025 accredited SAR facility to establish the conservative exposure value associated with the Device Under Test as detailed within this test report. Assessments were made in line with the guidelines contained in the reference documents. The method used for assessment was the ALSAS-10U (APREL Laboratories SAR Assessment System-10 Universal). All practices along with standards and scientific methodologies which have been utilized during the assessment of the Device Under Test (DUT) are detailed within this test report. APREL Laboratories currently hold senior and executive positions in multiple international standards organizations, including IEC, IEEE, among others, and work closely with several national regulators, including the FCC. Through the IEC, we have a liaison with CENELEC, and informal links to other national and international standards organizations. 4 Since 1981 17 Bentley Avenue, Ottawa Ontario, K2E-6T7 © 2005 APREL Laboratories E.& O.E. www.aprel.com [email protected] Phone (613) 820-2730 Fax (613) 820-4161 SAR & HAC Instruments for Wireless • C…

Text truncated - open the document above for the full version.

101 Since 1981 17 Bentley Avenue, Ottawa Ontario, K2E-6T7 © 2005 APREL Laboratories E.& O.E. www.aprel.com [email protected] Phone (613) 820-2730 Fax (613) 820-4161 SAR & HAC Instruments for Wireless • Consulting • Research • Standards • Compliance • Training Project number: Intel-FCC-5269 FCC ID: Q3QIWM3945ABG This report shall not be reproduced, except in full, without written approval of APREL Laboratories Appendix B Calibration Reports NCL CALIBRATION LABORATORIES Calibration File No: DC-596 Project Number: APREL-ALSAS10U C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. APREL Validation Dipole Manufacturer: APREL Laboratories Part number: ALS-D-2450-S-2 Frequency: 2450 MHz Serial No: 2450-220-00754 Customer: APREL Calibrated: 4 th March 2006 Released on: 4 th March 2006 Released By: ______________________________________________________ NCL CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4162 NCL CALIBRATION LABORATORIES Calibration File No: DC-597 Project Number: APREL-ALSAS10U C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. APREL Validation Dipole Manufacturer: APREL Laboratories Part number: ALS-D-5200-S-2 Frequency: 5200 MHz Serial No: 5200-230-00803 Customer: APREL Calibrated: 4 th March 2006 Released on: 4 th March 2006 Released By: ______________________________________________________ NCL CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4162 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. Conditions Dipole 5200-230-00803 was new and taken from stock prior to calibration. Ambient Temperature of the Laboratory: 22 qC +/- 0.5qC Temperature of the Tissue: 21 qC +/- 0.5qC We the undersigned attest that to the best of our knowledge the calibration of this device has been accurately conducted and that all information contained within this report has been reviewed for accuracy. ------------------------------------------------------------ Stuart Nicol Director Product Development ------------------------------------------------------------ D. Brooks Member of Engineering Staff (Calibration Engineer) NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 3 Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions Length: 23.6 mm Height: 14.0 mm Electrical Specification SWR: 1.12 U Return Loss: -24.9 dB Impedance: 55.8 : System Validation Results Frequency 1 Gram 10 Gram Peak 5200 MHz 62.9 17.9 223.1 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 4 Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SSI-TP-018-ALSAS. The results contained within this report are for Validation Dipole 5200-230-00803. The calibration routine consisted of a three-step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Return loss were assessed. Step 3 involved a System Validation using the ALSAS-10U, along with APREL E-020 130 MHz to 26 GHz E-Field Probe Serial Number 212. References SSI-TP-018-ALSAS Dipole Calibration Procedure SSI-TP-016 Tissue Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” Conditions Dipole 5200-230-00803 was new taken from stock. Ambient Temperature of the Laboratory: 22 qC +/- 0.5qC Temperature of the Tissue: 20 qC +/- 0.5qC NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 5 Dipole Calibration Results Mechanical Verification APREL Length APREL Height Measured Length Measured Height 23.6 mm 14.0 mm 23.4 mm 16.6 mm Tissue Validation Head Tissue 5200 MHz Measured Dielectric constant, H r 35.3 Conductivity, V [S/m] 5.30 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 6 Electrical Calibration Test Result S11 R/L -24.9 dB SWR 1.12 U Impedance 55.8: The Following Graphs are the results as displayed on the Vector Network Analyzer. S11 Parameter Return Loss NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 7 SWR NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 8 Smith Chart Dipole Impedance NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 9 System Validation Results Using the Electrically Calibrated Dipole Head Tissue Frequency 1 Gram 10 Gram Peak Above Feed Point 5200 MHz 62.9 17.9 223.1 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 10 Test Equ…

Text truncated - open the document above for the full version.

Note: This test report is for the customer shown above and their specific product only. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government (REV.1) FCC PART 15.247 MEASUREMENT AND TEST REPORT For Motion Computing, Inc. 8601 Ranch Road 2222, Building 2 Austin, TX 78730, USA FCC ID: Q3QIWM3945ABG Report Type: Original Report Product Type: 802.11 a/b/g Wireless Tablet PC Test Engineer: Dan Coronia Report Number: R0705223-247 Report Date: 2007-06-01 Reviewed By: Daniel Deng, RF Engineering Lead Prepared By: (63) Bay Area Compliance Laboratories Corp. (BACL) 1274 Anvilwood Ave. Sunnyvale, CA 94089 Tel: (408) 732-9162 Fax: (408) 732 9164 Motion Computing, Inc. FCC ID: Q3QIWM3945ABG Report #: R0705223-247 Page 2 of 63 FCC Part 15.247 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 ANTENNA INFORMATION.............................................................................................................................................4 EUT PHOTO.................................................................................................................................................................4 MECHANICAL DESCRIPTION.........................................................................................................................................4 OBJECTIVE...................................................................................................................................................................5 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................5 TEST METHODOLOGY..................................................................................................................................................5 MEASUREMENT UNCERTAINTY....................................................................................................................................5 TEST FACILITY.............................................................................................................................................................6 SYSTEM TEST CONFIGURATION ..........................................................................................................................7 JUSTIFICATION.............................................................................................................................................................7 EUT EXERCISE SOFTWARE..........................................................................................................................................7 SPECIAL ACCESSORIES.................................................................................................................................................7 EQUIPMENT MODIFICATIONS.......................................................................................................................................7 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................7 INTERFACE PORTS AND CABLING.................................................................................................................................8 SUMMARY OF TEST RESULTS ...............................................................................................................................9 §15.203 - ANTENNA REQUIREMENT....................................................................................................................10 APPLICABLE STANDARD............................................................................................................................................10 §15.107 - CONDUCTED EMISSIONS ......................................................................................................................11 SECTION 15.107 CONDUCTED LIMITS:........................................................................................................................11 TEST SETUP................................................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................11 TEST PROCEDURE......................................................................................................................................................11 TEST SETUP DIAGRAM...............................................................................................................................................12 SUMMARY OF TEST RESULTS.....................................................................................................................................12 §15.205 & §15.109 & §15.247(D) - RADIATED SPURIOUS EMISSIONS............................................................15 APPLICABLE STANDARD............................................................................................................................................15 TEST SETUP................................................................................................................................................................16 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................16 TEST PROCEDURE.........................................................................…

Text truncated - open the document above for the full version.

Note: This test report is for the customer shown above and their specific product only. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government (REV.1) FCC PART 15.407 MEASUREMENT AND TEST REPORT For Motion Computing, Inc. 8601 Ranch Road 2222, Building 2 Austin, TX 78730, USA Report Type: Original Report Product Type: 802.11 a/b/g Wireless Tablet PC Test Engineer: Dan Coronia Report Number: R0705223-407 Report Date: 2007-06-01 Reviewed By: Daniel Deng, RF Engineering Lead Prepared By: …

Text truncated - open the document above for the full version.