Q87-03457WEMO Smart Plug

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 35cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: IC Statement: This digital apparatus complies with CAN ICES-3(B). Ce périphérique numérique est conforme à la norme CAN ICES-3(B). Industry Canada Statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 35cm between the radiator and your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 35 cm de distance entre la source de rayonnement et votre corps. System Requirements: Wi-Fi router Android 4.4 and later; iOS v10.0 or higher General Specifications: Electrical Rating: 120V~/ 15A/ 60Hz / 1800W Number of Power Outlets: 1 Wi-Fi: 2.4GHz 802.11n Operating Conditions: For indoor use only Operating Temperature: 0–40º C Care: Unplug device prior to cleaning. Use dry cloth on exterior of the device. To avoid shock hazard and/ or damage to device, DO NOT use any liquid solution. Caution: • Make sure device is off before plugging in any electronics. • Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. • Protective earthing: Ground pin must not be removed from device. • Positioning for disconnection: The socket outlet shall be installed near the equipment and shall be easily accessible. To disconnect, pull device from outlet. • To avoid any risk or hazard that may be caused due to the end product connected to the smart plug, please read and understand the operation of the connected equipment before operating with the smart plug. • If any of the above instructions are not followed, or the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Device can be toggled on/off by touching the white button on the right side of the unit, or by using the WEMO® App. To reset the unit, hold down the power button for 10 seconds while plugging the smart plug into the wall outlet until the LED changes color. For support, please visit: wemo.com/support Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux condititions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable; et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnememt indésirable. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnementes ISED établies pour un envorionnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 35 cm de distance entre la source de rayonnement et votre corps. Configuration requise : Routeur Wi-Fi Android 4.4 et version plus récente; iOS 10.0 ou version plus récente Caractéristiques générales : Caractéristiques électriques : 120V~/ 15A/ 60Hz / 1800W Nombre de prises de courant : 1 Sans-fil : 2,4 GHz 802.11n Conditions d’utilisation : Pour usage intérieur seulement Température de fonctionnement : 0–40º C Entretien : Débranchez le périphérique avant de le nettoyer. Utilisez un chiffon sec sur l’extérieur du périphérique. Afin d’éviter tout choc électrique et/ou d’endommager votre périphérique, N’UTILISEZ PAS de solution liquide. Attention : • Assurez-vous que le périphérique est hors tension avant d’y brancher tout appareil électronique. • Toute modification qui n’a pas été expressément approuvée par la partie responsable des questions de conformité pourrait annuler le droit de l’utilisateur de se servir de cet équipement. • Mise à la terre de protection : La broche de mise à la terre ne doit pas être retiree de l’appareil. • Emplacement pour une déconnexion facile : La prise de courant doit être installée près de l’équipement et doit être facilement accessible. Pour le déconnecter, débranchez l’appareil de la prise. • Pour éviter tout danger ou risque de choc électrique dû au branchement d’un appareil sur la prise intelligente, veuillez lire et vous assurer de bien comprendre le guide d’utilisation de l’appareil branché, avant de le faire fonctionner avec la prise intelligente. • Si vous ne suivez pas les instructions susmentionnées ou si la méthode d’utilisation de l’équipement diffère de celle décrite par le fabricant, la protection assurée par l’équipement risque d’être altérée. Le dispositif peut être mis en marche ou arrêté en touchant le bouton blanc sur le côté droit du dispositif, ou en utilisant l’application WEMO®. Pour réinitialiser l’appareil, maintenez le bouton d’alimentation enfoncé pendant 10 secondes tout en branchant la prise intelligente dans la prise murale, jusqu’à ce que le voyant DEL change de couleur. Pour plus de renseignements, …

Text truncated - open the document above for the full version.

QR Code SETUP GUIDE To get started Download and launch the Wemo App to set up your Wemo iPhone users will be prompted to scan or type this HomeKit Setup Code What does the light color tell me? The light is off when your Wemo is connected to Wi-Fi and working normally. The light alternates between white and orange when your Wemo is ready for setup. The light will be solid white for 30 seconds when setup is successful and your Wemo is on. The light blinks white during a firmware update. The light is orange if the Wi-Fi signal is weak. Move your Wemo closer to your router. The light blinks orange if your Wemo is not connected to Wi-Fi. Unplug your router and Wemo and plug them back in. Got questions? Visit wemo.com/support or call us at 1-844-745-WEMO for support. For warranty information, go to wemo.com/warranty SAFETY WARNING Wemos are not designed for use with water pumps or heating appliances. Do not use Wemos with anything that might be dangerous if left unattended. 8820-02983 Rev. A00 352.42 x 279.40 x 126.21 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT A Unit: Flute/Grain: REV Intermediate PRINT SIDE 13+7/8 x 11 x 4+31/32 L x W x D (in): 7100-00267 Rev.A00 QIG QIG Material: 300 GSM C2S Double sided tape Screen Glue Insert OUTSIDE VIEW Material : 350 GSM C1S P# BOM - F7C063 Outer box Refer Artwork Hanger folded in the case pack Wafer seal (2 pc) 25 mm Refer Artwork Refer Artwork Material: 29 ECT E flute 300 gsm SBS laminated 34.29 [1+11/32] 79.75 [3+1/8] PET 0.5 mm 131.76 [5+3/16] 104.78 [4+1/8] 74.61 [2+15/16] Front Back 195.26 [7+11/16] 112.71 [4+7/16] 228.09 [8+31/32] 367.68 [14+15/32] 114.3 [4+1/2] 63.5 [2+1/2] 75.91 [3] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1292.733 x 568.208 50.895 x 22.370 Die Line File: NET-Networking Pushpak Jain Please refer to drawing F7C063_WEMO MINI V2_ PACKAGING COST DOWN Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 11/26/2019 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): 352.42 x 279.40 x 126.21 Business Unit: Program Manager: Packaging Engineer: Material: Blank Size (in): Side Shown: L x W x D (mm): DIE LAYOUT A Unit: Flute/Grain: REV Intermediate PRINT SIDE 13+7/8 x 11 x 4+31/32 L x W x D (in): 7100-00267 Rev.A00 QIG QIG Material: 300 GSM C2S Double sided tape Screen Glue Insert OUTSIDE VIEW Material : 350 GSM C1S P# BOM - F7C063 Outer box Refer Artwork Hanger folded in the case pack Wafer seal (2 pc) 25 mm Refer Artwork Refer Artwork Material: 29 ECT E flute 300 gsm SBS laminated 34.29 [1+11/32] 79.75 [3+1/8] PET 0.5 mm 131.76 [5+3/16] 104.78 [4+1/8] 74.61 [2+15/16] Front Back 195.26 [7+11/16] 112.71 [4+7/16] 228.09 [8+31/32] 367.68 [14+15/32] 114.3 [4+1/2] 63.5 [2+1/2] 75.91 [3] IN/MM Drawing Scale 1:1 Retail Outside Dimension (Including Hang Tab) DO NOT PRINT DIE LINES, PRINTERS NOTES PRINT SPECS: DIE/MATERIAL SPECS: 1292.733 x 568.208 50.895 x 22.370 Die Line File: NET-Networking Pushpak Jain Please refer to drawing F7C063_WEMO MINI V2_ PACKAGING COST DOWN Color Plates: Notes: Artwork File: horizontal 00 RELEASE DATE: 11/26/2019 Tolerance:+/- 1/32" - 0.8mm Blank Size (mm): Finish: DIELINE: THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST This dieline works for following skus (if any): QSG_WSP080_8820-02983_RevA00_Mini_v2_Costdown C Y M K PMS 7488c ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK, PMS 7488C OVERALL P P C OAT .22" .24" .24" .285" .285" .20" .20" .285" .20" INNOVATION CREATIVE GROUP 131984 FILE NAME QSG_WSP080_8820-02983_RevA00_Mini_v2_Costdown SKU# WSP080 P# 8820-02983 REV A00 DESIGNER Jonathan DAT E 12/13/19 6:59 PM VERSION 01

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949‐265‐1429 Fax: 949‐265‐1429 Date: February 20, 2020 We, LINKYSYS LLC declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: Q87-03457 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- PO-WEN CHENG LINKSYS LLC Tel: 949-238-1429 Fax: 949-265-1429 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-265-1429 Fax: 949-265-1429 Date: 2020-02-20 FCC ID: Q87-03457 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- PO-WEN CHENG LINKSYS LLC Tel: 949-238-1429 Fax: 949-265-1429 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-265-1429 Fax: 949-265-1429 Date: 2020-02-20 FCC ID: Q87-03457 AUTHORIZATION LETTER To Whom It May Concern: LINKYSYS LLC hereby authorizes Debby Lin / Senior specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin / Senior specialist of BV CPS Taoyuan on LINKYSYS LLC’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- PO-WEN CHENG LINKSYS LLC Tel: 949-238-1429 Fax: 949-265-1429 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-265-1429 Fax: 949-265-1429 Date: 2020-02-20 FCC ID: Q87-03457 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- PO-WEN CHENG LINKSYS LLC Te l : 949-238-1429 Fax: 949-265-1429 E-mail: [email protected]

Reference No.: 200131E01-1 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200131E01-1 Page 2 Reference No.: 200131E01-1 Page 3 Reference No.: 200131E01-1 Page 4

1234 5678 Wemo.Plug.XXX WeMo mini V3 WSP080 US-CA REVISION: E00 REVISION NOTES: A00: RELEASE TO AGILE B00: COUNTRY OF ORIGIN REMOVED FROM ARTWORK PRINTED ON ENCLOSURE- WILL BE ON SERIAL NUMBER/MAC LABEL C00: REMOVED 1/2 HP FROM OUTPUT RATING D00: WEMO ID AND HOMEKIT ID ON SHARED LABEL E00: RATING INFORMATION REVISED DATE: 2019. 11. 27 DESIGNER: MW SCALE : 1:1 ELEMENTS SHOWN IN PURPLE: BELKIN WHITE TEXTURE: YICK SANG - 20038 (MATTE) ELEMENTS SHOWN IN YELLOW PAD PRINTED GRAPHICS: PMS Cool Grey 6C ELEMENTS SHOWN IN GREEN: BELKIN WHITE (COLOR CHIP) TEXTURE: YICK SANG - 20048 (MATTE) ELEMENTS SHOWN IN BLUE: BELKIN WHITE TEXTURE: POLISHED SP1-A1 HIGH GLOSS IDS-001690 STANDBY ICON DEBOSSED, 0.1mm DEPTH TEXTURE: YICK SANG 20048, MATTE MUST BE CENTERED ON BUTTON REAR ENCLOSURE COLOR: BELKIN WHITE TEXTURE: YICK SANG - 20048 (MATTE) [MATCH WEMO MINI] FRONT ENCLOSURE COLOR: BELKIN WHITE TEXTURE: POLISHED SP1-A1 HIGH GLOSS REAR SURFACE COLOR: BELKIN WHITE TEXTURE: POLISHED SP1-A1 HIGH GLOSS BUTTON COLOR: BELKIN WHITE TEXTURE: POLISHED SP1-A1 HIGH GLOSS MOLDED GRAPHICS COLOR: BELKIN WHITE TEXTURE: POLISHED SP1-A1 HIGH GLOSS CONDUCTORS MATCH WEMO MINI PLATING AND FINISH SN#, MAC LABEL, COUNTRY OF ORIGIN Revision E00 LIGHT PIPE: TRANSPARENT MILKY WHITE WEMO LOGO COLOR: PMS COOL GRAY 6C HOMEKIT WEMO ID LABEL SEE IDS-001797 FOR LABEL ARTWORK 4.0 7 4.0 12 5.9 6mm clearance required from metal conductors for printing 28x12 LABEL S/N # MAC COO 30.50 55 36.90

Label

Reference No.: 200131E01-2 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200131E01-2 Page 2 Reference No.: 200131E01-2 Page 3 Reference No.: 200131E01-2 Page 4 Reference No.: 200131E01-2 Page 5

Report No.: SA200131E01 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200131E01 FCC ID: Q87-03457 Test Model: WSP080 Received Date: Jan. 31, 2020 Test Date: Feb. 19, 2020 Issued Date: Mar. 02, 2020 Applicant: LINKYSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA200131E01 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: SA200131E01 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200131E01 Original release. Mar. 02, 2020 Report No.: SA200131E01 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: WEMO Smart Plug Brand: WeMo Test Model: WSP080 Sample Status: ENGINEERING SAMPLE Applicant: LINKYSYS LLC Test Date: Feb. 19, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 02, 2020 Joyce Kuo / Specialist Approved by : , Date: Mar. 02, 2020 Clark Lin / Technical Manager Report No.: SA200131E01 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 35cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna No. Ant. Net Gain (dBi) Frequency range (GHz) Antenna Type Connector Type 1 0 2.4~2.4835 PIFA NA Report No.: SA200131E01 Page No. 6 / 6 Report Format Version: 6.1.1 2.5 Calculation Result of Maximum Conducted Power Operation Mode Evaluation Frequency (MHz) Max AV Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/m 2 ) WiFi 2.4GHz 2437 240.436 0.00 35 0.01562 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power de…

Text truncated - open the document above for the full version.

Report No.: RF200131E01 Page No. 1 / 47 Report Format Version: 6.1.2 FCC Test Report (WLAN) Report No.: RF200131E01 FCC ID: Q87-03457 Test Model: WSP080 Received Date: Jan. 31, 2020 Test Date: Feb. 15 to 20, 2020 Issued Date: Mar. 02, 2020 Applicant: LINKYSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200131E01 Page No. 2 / 47 Report Format Version: 6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards and references ............................................................... 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 30 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 30 4.2.2 Test Instruments ................................................................................................................................ 30 4.2.3 Test Procedures ................................................................................................................................. 31 4.2.4 Deviation from Test Standard ...............…

Text truncated - open the document above for the full version.

Reference No.: 200131E01 Page No. 1 / 4 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: 200131E01 Page No. 2 / 4 Reference No.: RADIATED EMISSION TEST (Below 1GHz) Reference No.: 200131E01 Page No. 3 / 4 Reference No.: RADIATED EMISSION TEST (Above 1GHz) Reference No.: 200131E01 Page No. 4 / 4 Reference No.: