Q87-08151Linksys Dual-Band 802.11ax Wireless Router

This document contains the regulatory and warra nty information of t he following models: MR9600, MR9000, MR9000X, MR8950, MR8900, MR8300, MR8250, MR7350, MR7340, MR7320, MR731 0, MR6350, MR6340, MR6330 and MR6320 FCC Statement This device complies with Part 15 of t he FCC Rules. Operation is subject t o the following two conditi ons: ( 1) This device may not cause harmful i nterference, a nd (2) t his device must accept any interference received, i ncluding interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant t o Part 15 of t he FCC Rules. These limits are designed to provide reasonable protection against harmful i nterference in a residential i nstallation. This equipment generates, uses, a nd can radiate radio frequency energy and, i f not i nstalled and used according to the instructions, may cause harmful interference to radio communications. However, t here is no guar antee that i nterference will not occur i n a particular i nstallation. I f t his equipment does cause harmful i nterference to radio or t elevision reception, which is found by turning the equipment o and on, t he user is encouraged to try to correct t he interference by one or more of t he following measures: • Reorient or r elocate the receiving antenna • Increase the separation between the equipment and devices • Connect t he equipment t o an outlet other t han the receiver’s • Consult a d ealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 2.4GHz operation of t his product i n the USA is firmware-limited to channels 1 through 11. The device for t he band 5150-5250 MHz i s only for i ndoor usage to reduce the potential f or harmful i nterference to co-channel mobile satellite systems. FCC Radiation Exposure Statement Thi s equipment complies with FCC radiation exposure limits set f orth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 35 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or t ransmitter except i n accordance with FCC multi-transmitter product procedures. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 80 2.11 specifications. Actual performance can vary, i ncluding lower wireless network capacity, data throughput r ate, r ange and coverage. Performance depends on many factors, c onditi ons and variables, including distance from the access point, v olume of network traic, building materials and construction, operating system used, mix of wireless products used, i nterference and other adverse conditi ons. Safety Notices English WARNING: D o not use this product near water, f or example, in a wet basement or near a swimming pool. WARNING: A void using this product during an electrical s torm. There may be a remote risk of electric shock from lightning. WARNING: T he power adaptor i s the equipment ́s disconnection device. The power outlet must be located nearby the equipment and its access must be easy. This product i s i ntended for i ndoor use only. Español ADVERTENCIA: N o use este producto cerca del agua, por ejemplo en un sotano húmedo o cerca de una piscina. ADVERTENCIA: E vite usar este producto durante una tormenta eléctrica. Puede existir el r iesgo remoto de que se produzca una descarga eléctrica producida por un rayo. ADVERTENCIA: E l adaptador de alimentación es el dispositi vo de desconexión del equipo. La base de toma de corriente debe estar cerca del equipo y ser fácilmente accessible. Este producto está destinado solo para uso en interiores. Third-Party Software or Firmware The use of software or f irmware not supported/provided by Linksys products may result t hat t he equipment i s no longer compliant with the regulatory requirements. WARRANTY AND SUPPORT INFORMATION IMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION LIMIT ED WARRANTY (UNITED STATES AND CANADA) This warranty is provided to you by Belkin International, I nc, or one of i ts subsidiaries or aili ates (“Belkin”)IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer's warranty are additi onal to any rights and remedies that you may have under l ocal c onsumer protection laws. Nothing in this warranty limits or aects your l egal r ights. This manufacturer's warran ty is governed by the laws of t he country in which you purchased your Belkin, Linksys or WeMo product. I n many countries, c onsumers have rights under l ocal c onsumer l aws. Those consumer r ights may dier between countries, s tates and provinces, a nd often cannot be excluded. Your l ocal c onsumer r ights organization can advise you on your l egal r ights. This manufacturer’s warranty is not i ntended to: • change or exc lude any rights under consumer l aw that cannot be lawfully changed or exc luded; or • limit or exclude any right you have against t he person who sold the Belkin, Linksys or WeMo product t o you if t hat person has breached their sales contract with you. WHAT DOES THIS WARRANTY COVER? Belkin warrants that t he product hardware and any software media (i.e., media on which the product software is provided) will be free from defects i n materials and workmanship under normal use during the Warranty Period described below. This means that t he product won’t be defective, a nd that i t will look and work as advertised during the relevant period. This warranty does not apply to products purchased from a source other t han Belkin or a Belkin Authorized Reseller. How long is the product warranted? Belkin warrants that t he hardware in this Belkin, Linksys or WeMo product, a nd any associated software media, will be free from defects …

Text truncated - open the document above for the full version.

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-238-4518 Date: March 17, 2020 We, LINKYSYS LLC declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: Q87-08151 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Po-Wen Cheng LINKSYS LLC Tel: 949-238-4518 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-238-4518 Date: 2020-03 -24 FCC ID: Q87-08151 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Po-Wen Cheng, Authorized Signatory LINKSYS LLC Tel: 949-238-4518 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-238-4518 Date: 2020-03-17 FCC ID: Q87-08151 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Po-Wen Cheng LINKSYS LLC Te l : 949-238-4518 E-mail: [email protected]

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-238-4518 Date: 2020-03-17 FCC ID: Q87-08151 AUTHORIZATION LETTER To Whom It May Concern: LINKYSYS LLC hereby authorizes Debby Lin / Senior specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin / Senior specialist of BV CPS Taoyuan on LINKYSYS LLC’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Po-Wen Cheng LINKSYS LLC Tel: 949-238-4518 E-mail: [email protected]

Reference No.: 191227E08-1 Page No. 1 / 7 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Reference No.: 191227E08-1 Page No. 2 / 7 Reference No.: xxxxxxxx Reference No.: 191227E08-1 Page No. 3 / 7 Reference No.: xxxxxxxx Reference No.: 191227E08-1 Page No. 4 / 7 Reference No.: xxxxxxxx Adapter: KSA-24W-120200HU Reference No.: 191227E08-1 Page No. 5 / 7 Reference No.: xxxxxxxx Reference No.: 191227E08-1 Page No. 6 / 7 Reference No.: xxxxxxxx Adapter: WB-24J12FU Reference No.: 191227E08-1 Page No. 7 / 7 Reference No.: xxxxxxxx

LINKSYS LLC 121 Theory Drive Irvine California 92617 United States Tel: 949-265-1429 Fax: 949-265-1429

Reference No.: 191227E08-2 Page No. 1 / 14 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Reference No.: 191227E08-2 Page No. 2 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 3 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 4 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 5 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 6 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 7 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 8 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 9 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 10 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 11 / 14 Reference No.: xxxxxxxx Antenna 1 Reference No.: 191227E08-2 Page No. 12 / 14 Reference No.: xxxxxxxx Reference No.: 191227E08-2 Page No. 13 / 14 Reference No.: xxxxxxxx Antenna 2 Reference No.: 191227E08-2 Page No. 14 / 14 Reference No.: xxxxxxxx

Report No.: SA191227E08 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 191227E08 RF Exposure Report Report No.: SA191227E08 FCC ID: Q87-08151 Test Model: MR7350 Series Model: MR7340, MR7320, MR7310 Received Date: Dec. 27, 2019 Test Date: Feb. 03 to Mar. 04, 2020 Issued Date: Mar. 17, 2020 Applicant: LINKSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA191227E08 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 191227E08 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191227E08 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 191227E08 Release Control Record Issue No. Description Date Issued SA191227E08 Original release. Mar. 17, 2020 Report No.: SA191227E08 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 191227E08 1 Certificate of Conformity Product: Linksys Dual-Band 802.11ax Wireless Router Brand: Linksys Test Model: MR7350 Series Model: MR7340, MR7320, MR7310 Sample Status: ENGINEERING SAMPLE Applicant: LINKSYS LLC Test Date: Feb. 03 to Mar. 04, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date:Mar. 17, 2020 Phoenix Huang / Specialist Approved by : , Date:Mar. 17, 2020 Clark Lin / Technical Manager Report No.: SA191227E08 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 191227E08 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 35 cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna No. Antenna Net Gain (dBi) Frequency Range (GHz) Antenna TypeConnecteor Type Cable Length (mm) WiFi 1 2.05 2.4~2.4835 Dipole i-pex(MHF) 330 2.44 5.15~5.25 2.71 5.25~5.35 3.07 5.47~5.725 3.02 5.725~5.85 WiFi 2 2.39 2.4~2.4835 Dipole i-pex(MHF) 80 3.07 5.15~5.25 3.03 5.25~5.35 3.08 5.47~5.725 3.13 5.725~5.85 BT 3.6 2.4~2.4835 Metal none NA Report No.: SA191227E08 Page No. 6 / 6 Report Format Vers…

Text truncated - open the document above for the full version.

Report No.: RF191227E08-4 Page No. 1 / 29 Report Format Version: 6.1.2 Reference No.: 191227E08 Supplemental “Transmit Simultaneously” Test Report Report No.: RF191227E08-4 FCC ID: Q87-08151 Test Model: MR7350 Series Model: MR7340, MR7320, MR7310 Received Date: Dec. 27, 2019 Test Date: Jan. 13 to Feb. 24, 2020 Issued Date: Mar. 17, 2020 Applicant: LINKSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191227E08-4 Page No. 2 / 29 Report Format Version: 6.1.2 Reference No.: 191227E08 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.1.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.2 Description of Support Units .............................................................................................................. 11 3.2.1 Configuration of System under Test .................................................................................................. 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 22 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 22 4.2.2 Test Instruments ................................................................................................................................ 22 4.2.3 Test Procedures ................................................................................................................................. 23 4.2.4 Deviation from Test Standard ............................................................................................................ 23 4.2.5 Test Setup .......................................................................................................................................... 23 4.2.6 EUT Operating Conditions …

Text truncated - open the document above for the full version.

Report No.: RF191227E08-3 Page No. 1 / 40 Report Format Version: 6.1.1 Reference No.: 191227E08 FCC Test Report (BT-LE) Report No.: RF191227E08-3 FCC ID: Q87-08151 Test Model: MR7350 Series Model: MR7340, MR7320, MR7310 Received Date: Dec. 27, 2019 Test Date: Jan. 13 to Mar. 04, 2020 Issued Date: Mar. 19, 2020 Applicant: LINKSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191227E08-3 Page No. 2 / 40 Report Format Version: 6.1.1 Reference No.: 191227E08 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 14 3.5 General Description of Applied Standards and References ............................................................. 15 4 Test Types and Results ...................................................................................................................... 16 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 16 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 16 4.1.2 Test Instruments ................................................................................................................................ 17 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Setup .......................................................................................................................................... 20 4.1.6 EUT Operating Conditions ................................................................................................................. 21 4.1.7 Test Results ....................................................................................................................................... 22 4.2 Conducted Emission Measurement .................................................................................................. 27 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 27 4.2.2 Test Instruments ................................................................................................................................ 27 4.2.3 Test Procedures ......................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF191227E08 Page No. 1 / 61 Report Format Version: 6.1.2 Reference No.: 191227E08 FCC Test Report (WLAN) Report No.: RF191227E08 FCC ID: Q87-08151 Test Model: MR7350 Series Model: MR7340, MR7320, MR7310 Received Date: Dec. 27, 2019 Test Date: Jan. 13 to Feb. 24, 2020 Issued Date: Mar. 19, 2020 Applicant: LINKSYS LLC Address: 121 Theory Drive Irvine California 92617 United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Ta i w a n FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The …

Text truncated - open the document above for the full version.