Q87-E1200V2Wireless-N Router

User Guide Linksys E-Series Routers E1200 E1500 E2500 E3200 E4200 Linksys E-Series i E1200/E1500 Contents Linksys E-Series i Product overview E1200/E1500 1 Package contents 1 Features 1 Back view 2 Bottom view 2 Setting Up: Basics How to create a home network 10 What is a network? 10 How to set up a home network 10 Where to find more help 10 How to set up your router 10 How to start Cisco Connect 11 How to improve your wireless connection speed 12 How to test your Internet connection speed 12 How to connect devices to your network 13 How to connect a computer to your network 13 How to connect a printer 15 How to connect other devices 15 How to set up parental controls 17 How to access parental controls 17 How to select the computers to have parental controls 18 How to set parental controls 19 How to set up guest access to your network 19 How to change your router’s name and password 21 Setting Up: Advanced How to open the browser-based utility 22 How to manually set up your router 22 How to manually set up your Internet connection 23 How to set up the DHCP server on your router 25 How to set up DHCP reservation 26 How to find your network on the Internet 26 How to clone a MAC address 27 How to connect to your corporate office using a VPN 28 How to optimize your router for gaming and voice 28 How to remotely change your router settings 30 How to enable Voice over IP on your network 31 How to configure UPnP 31 How to use a router as an access point 31 How to put your new router behind an existing router 33 To add your router to an existing router or gateway 33 To share an Internet connection 33 To extend your network 35 How to expose a device to the Internet 35 Improving Security How do I know if my network is secure? 37 Network security following a manual setup 37 How to set up wireless security using Wi-Fi Protected Setup 38 Wi-Fi Protected Setup activity light 38 Connecting a device using the Wi-Fi Protected Setup button 38 How to connect a device using its Wi-Fi Protected Setup PIN 39 How to connect a device using the router’s Wi-Fi Protected Setup PIN 39 E1200/E1500 Contents ii E1200/E1500 Contents Linksys E-Series How to connect a device manually 39 How to control access to your wireless network 40 How to improve security using the built-in firewall 41 Port Forwarding and Port Triggering How to set up port forwarding 51 How to set up port forwarding for a single port 51 How to set up port forwarding for multiple ports 52 How to set up port forwarding for a range of ports 52 How to set up port range triggering for online gaming 53 How to configure your Xbox for online gaming 54 Maintaining and Monitoring How to back up and restore your router configuration 55 How to restore factory defaults 55 How to upgrade the router’s firmware 56 How to check the status of your router 57 How to disable the Ethernet port status lights 58 How to test your Internet connection 59 How to configure and use logs 60 Browser-based Utility Menu Structure E1200/E1500 62 Specifications Linksys E1200 66 Linksys E1500 67 iii E2500 Contents Linksys E-Series iii E2500 Contents Product overview E2500 3 Package contents 3 Features 3 Back view 4 Bottom view 4 Setting Up: Basics How to create a home network 10 What is a network? 10 How to set up a home network 10 Where to find more help 10 How to set up your router 10 How to start Cisco Connect 11 How to improve your wireless connection speed 12 How to test your Internet connection speed 12 How to connect devices to your network 13 How to connect a computer to your network 13 How to connect a printer 15 How to connect other devices 15 How to set up parental controls 17 How to access parental controls 17 How to select the computers to have parental controls 18 How to set parental controls 19 How to set up guest access to your network 19 How to change your router’s name and password 21 Setting Up: Advanced How to open the browser-based utility 22 How to manually set up your router 22 How to manually set up your Internet connection 23 How to get the most out of your dual-band router 23 How to set up the DHCP server on your router 25 How to set up DHCP reservation 26 How to find your network on the Internet 26 How to clone a MAC address 27 How to connect to your corporate office using a VPN 28 How to optimize your router for gaming and voice 28 How to remotely change your router settings 30 How to enable Voice over IP on your network 31 How to configure UPnP 31 How to use a router as an access point 31 How to put your new router behind an existing router 33 To add your router to an existing router or gateway 33 To share an Internet connection 33 To extend your network 35 How to expose a device to the Internet 35 Improving Security How do I know if my network is secure? 37 Network security following a manual setup 37 How to set up wireless security using Wi-Fi Protected Setup 38 Wi-Fi Protected Setup activity light 38 iv E2500 Contents Linksys E-Series Connecting a device using the Wi-Fi Protected Setup button 38 How to connect a device using its Wi-Fi Protected Setup PIN 39 How to connect a device using the router’s Wi-Fi Protected Setup PIN 39 How to connect a device manually 39 How to control access to your wireless network 40 How to improve security using the built-in firewall 41 Port Forwarding and Port Triggering How to set up port forwarding 51 How to set up port forwarding for a single port 51 How to set up port forwarding for multiple ports 52 How to set up port forwarding for a range of ports 52 How to set up port range triggering for online gaming 53 How to configure your Xbox for online gaming 54 Maintaining and Monitoring How to back up and restore your router configuration 55 How to restore factory defaults 55 How to upgrade the router’s firmware 56 How to check the status of your router 57 How to disable the Ethernet port status lights 58 How to test your Internet connection 59 How to configure and use logs 60 Browser-based Utility Menu Structure E2500 63 Sp…

Text truncated - open the document above for the full version.

Report No.: SA110907E06 Report Format Version 4.0.0. 1 RF EXPOSURE REPORT REPORT NO.: SA110907E06 MODEL NO.: E1200 VERSION: 2 FCC ID: Q87-E1200V2 RECEIVED: Sep. 07, 2011 TESTED: Sep. 20, 2011 ISSUED: Oct. 17, 2011 APPLICANT: Cisco Consumer Products LLC ADDRESS: 121 Theory Drive Irvine, CA 92617(USA) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110907E06 Report Format Version 4.0.0. 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION.....................................................................................................4 2. RF EXPOSURE LIMIT.............................................................................................5 3. MPE CALCULATION FORMULA............................................................................5 4. CLASSIFICATION...................................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER..........................6 Report No.: SA110907E06 Report Format Version 4.0.0. 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110907E06 Original release Oct. 17, 2011 Report No.: SA110907E06 Report Format Version 4.0.0. 4 1.CERTIFICATION PRODUCT: Wireless-N Router BRAND NAME: Cisco MODEL NO.: E1200 TEST SAMPLE: ENGINEERING SAMPLE TESTED: Sep. 20, 2011 APPLICANT: Cisco Consumer Products LLC STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: E1200) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 17, 2011 ( Midoli Peng, Specialist) APPROVED BY : , DATE: Oct. 17, 2011 ( May Chen, Deputy Manager ) Report No.: SA110907E06 Report Format Version 4.0.0. 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110907E06 Report Format Version 4.0.0. 6 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 437.7 4 20 0.219 1.00 ---END---

Report No.: RF110907E06 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110907E06 MODEL NO.: E1200 VERSION: 2 FCC ID: Q87-E1200V2 RECEIVED: Sep. 07, 2011 TESTED: Sep. 08 to 20, 2011 ISSUED: Oct. 17, 2011 APPLICANT: Cisco Consumer Products LLC ADDRESS: 121 Theory Drive Irvine, CA 92617(USA) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 80 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110907E06 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................14 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................15 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................16 4. TEST TYPES AND RESULTS..............................................................................18 4.1 CONDUCTED EMISSION MEASUREMENT........................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................18 4.1.2 TEST INSTRUMENTS..........................................................................................18 4.1.3 TEST PROCEDURES..........................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD.................................................................19 4.1.5 TEST SETUP.......................................................................................................20 4.1.6 EUT OPERATING CONDITIONS.........................................................................20 4.1.7 TEST RESULTS (With adapter 1).........................................................................21 4.1.8 TEST RESULTS (With adapter 2).........................................................................23 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 TEST INSTRUMENTS..........................................................................................26 4.2.3 TEST PROCEDURES..........................................................................................27 4.2.4 DEVIATION FROM TEST STANDARD.................................................................27 4.2.5 TEST SETUP.......................................................................................................28 4.2.6 EUT OPERATING CONDITIONS.........................................................................28 4.2.7 TEST RESULTS...................................................................................................29 4.3 6dB BANDWIDTH MEASUREMENT....................................................................58 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................58 4.3.2 TEST INSTRUMENTS..........................................................................................58 4.3.3 TEST PROCEDURE.............................................................................................58 4.3.4 DEVIATION FROM TEST STANDARD.................................................................58 4.3.5 TEST SETUP.......................................................................................................58 4.3.6 EUT OPERATING CONDITIONS.........................................................................58 4.3.7 TEST RESULTS...................................................................................................59 4.4 MAXIMUM PEAK OUTPUT POWER....................................................................63 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................63 4.4.2 INSTRUMENTS....................................................................................................63 Report No.: RF110907E06 3 Report Format Version 4.0.0 4.4.3 TEST PROCEDURES..........................................................................................63 4.4.4 DEVIATION FROM TEST STANDARD.................................................................63 4.4.5 TEST SETUP.......................................................................................................63 4.4.6 EUT OPERATING CONDITIONS.........................................................................63 4.4.7 TEST RESULTS...................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST(With adapter 1) 2 CONDUCTED EMISSION TEST(With adapter 2) 3 RADIATED EMISSION TEST