Q87-EA6900V11Linksys Smart Wi-Fi Router AC1900

Regulatory Information EA6900 Table of Contents i Table of Contents Wireless Regulatory Information FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Mexico Regulatory Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 EAC Mark of Conformity for Russia, Kazakhstan and Belarus . . . . . . . . . . 1 Avis d’Industrie Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wireless Equipment (Wireless-AC/N/G/A/B Products) . . . . . . . . . . . . . . . 8 National Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Usage Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Technical Documents on www .linksys .com . . . . . . . . . . . . . . . . . . . . . .9 WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) . . . . . . 10 1 Wireless Regulatory Information Wireless Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation . This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna •Increase the separation between the equipment and devices •Connect the equipment to an outlet other than the receiver’s •Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment . IEEE 802 .11b or 802 .11g operation of this product in the USA is firmware-limited to channels 1 through 11 . The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems . Mexico Regulatory Statement La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada . EAC Mark of Conformity for Russia, Kazakhstan and Belarus FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with minimum distance 26 cm between the radiator and your body . This device and it’s antennas(s) must not be co- located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures . Industry Canada Statement CAN ICES-3 (B)/NMB-3 (B) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device . For product available in the USA/Canada market, only channel 1~11 can be operated . Selection of other channels is not possible . The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure . Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology . Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with minimum distance 26 cm between the radiator & your body . This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi- transmitter product procedures . Restrictions in the 5 GHz Band The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems . This device has been designed to operate with an antenna having a maximum gain of 1 .3 dBi and 1 .95 dBi at 2 .4 GHz and 5 GHz respectively . Antenna having a higher gain is strictly prohibited per regulations of Industry Canada . The required antenna impedance is 50 ohms . The maximum antenna gain (Please see the table below) permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRP limit and because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 2 Wireless Regulatory Information 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices . No. Antenna Type For 2.4 GHz Gain (dBi) For 5 GHz Gain (dBi) Antenna Connector 1Dipole1 .3 Band 1: 0 .87 Band 4: 1 .95 R-SMA 2Dipole1 .1 Band 1: 0 .47 Band 4: 1 .55 R-SMA 3Dipole1 .1 Band 1: 0 .47 Band 4: 1 .55 R-…

Text truncated - open the document above for the full version.

User Guide SMART Wi-Fi Router AC1900, EA6900 i Contents Linksys EA-Series i Product Overview EA6900 V1.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Wall-mounting placement 4 Setting Up: Basics How to create a home network. . . . . . . . . . . . . . . . . . . . . .5 What is a network? 5 How to set up a home network 5 Where to find more help. . . . . . . . . . . . . . . . . . . . . . . . . .5 How to install your router . . . . . . . . . . . . . . . . . . . . . . . . .6 How to configure your router . . . . . . . . . . . . . . . . . . . . . . .7 How to connect to Linksys Smart Wi-Fi 7 How to connect directly to your router 8 How to improve your wireless connection speed 8 How to change your network’s name and password 9 How to change your router’s local access password 9 How to change your router’s time zone 10 How to test your Internet connection speed . . . . . . . . . . . .10 How to connect devices to your network . . . . . . . . . . . . . .11 How to connect a computer to your network 11 How to connect a USB printer 11 How to connect other devices 12 How to view device details 13 How to set up parental controls . . . . . . . . . . . . . . . . . . . .14 How to set parental controls 14 How to configure your guest network . . . . . . . . . . . . . . . .15 How to back up your router configuration . . . . . . . . . . . . .16 How to customize Linksys Smart Wi-Fi . . . . . . . . . . . . . . . .17 Using widgets 17 Customizing the Device List 17 Using an External Drive Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 How to attach a USB drive . . . . . . . . . . . . . . . . . . . . . . . .18 How to use secured folder access . . . . . . . . . . . . . . . . . . .19 How to set up authorized users and shared folders 19 How to access shared folders 20 How to set up your router as a media server . . . . . . . . . . . .21 How to connect your UPnP device to the media server 22 How to remotely access storage . . . . . . . . . . . . . . . . . . . .22 Setting Up: Advanced How to manually set up your router. . . . . . . . . . . . . . . . . .24 How to manually set up your Internet connection 24 How to associate a router with your Linksys Smart Wi-Fi account 25 How to get the most out of your dual-band router . . . . . . . .26 How to control access to your network . . . . . . . . . . . . . . . .27 How to improve security using the built-in firewall 29 How to set up the DHCP server on your router. . . . . . . . . . .30 How to set up DHCP reservation 31 How to access your network on the Internet . . . . . . . . . . . .32 How to clone a MAC address . . . . . . . . . . . . . . . . . . . . . .33 How to connect to your corporate office using a VPN . . . . . .33 How to optimize your router for gaming and voice . . . . . . . .34 How to enable Voice over IP on your network . . . . . . . . . . .35 How to configure UPnP . . . . . . . . . . . . . . . . . . . . . . . . .36 How to use a router as an access point . . . . . . . . . . . . . . . .37 How to put your new router behind an existing router . . . . . .38 Contents ii Contents Linksys EA-Series To add your router to an existing router or gateway 38 To share an Internet connection 39 To extend your network 41 How to expose a device to the Internet . . . . . . . . . . . . . . .41 Port Forwarding and Port Triggering How to set up port forwarding. . . . . . . . . . . . . . . . . . . . .43 How to set up port forwarding for a single port 43 How to set up port forwarding for multiple ports 44 How to set up port forwarding for a range of ports 44 How to set up port range triggering for online gaming . . . . .45 Maintaining and Monitoring How to back up and restore your router configuration. . . . . .47 How to upgrade the router’s firmware . . . . . . . . . . . . . . . .48 How to restore factory defaults . . . . . . . . . . . . . . . . . . . .48 How to check the status of your router . . . . . . . . . . . . . . . .49 How to disable the Ethernet port status lights 50 How to test your Internet connection 50 How to configure and use logs 51 Troubleshooting Your router was not successfully set up . . . . . . . . . . . . . . .52 Windows XP Service Pack update . . . . . . . . . . . . . . . . . . .52 Your Internet cable is not plugged in message . . . . . . . . . . . .53 Cannot access your router message . . . . . . . . . . . . . . . . . .53 After setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 The Internet appears to be unavailable 55 Linksys Smart Wi-Fi does not open in your web browser 55 You cannot access Linksys Smart Wi-Fi 56 All other troubleshooting has been unsuccessful 56 Specifications Linksys EA6900 V1.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 1 Product Overview Linksys EA-Series 1 Product Overview EA6900 Package contents In addition to your router, your router package includes: •Network (Ethernet) cable •AC power adapter •SimpleTap™ card Features Wireless-AC technology Built with leading 802.11ac wireless technology, your router offers maximum speed and range to create an ultra-powerful network designed for home theater performance. Connect your computers, Internet-ready TVs, game consoles, smartphones and other Wi-Fi devices at blazingly fast transfer rates for an unrivaled experience. The power of dual band Double your network bandwidth with simultaneous dual-band wireless-AC. The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. SpeedBoost Higher quality antenna technology helps maintain high speeds across greater distances throughout your home. Advanced security Keep Wi-Fi freeloaders and Internet threats at bay with WPA2 encryption and SPI firewall to help keep your network protected. Benefits of gigabit Use the four Gigabit Ethernet (10/100/1000) ports for quick file sharing (up to 10× faster than standard Ethernet) between other Gigabit-enabled devi…

Text truncated - open the document above for the full version.

Pursuant to Sections 0.457 and 0.459 of the commission's rules, we request short-term confidential treatment for the following information until April 30, 2014 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

Report No.: 130725E01A Page 1 Reference No.: 140108E11 CONSTRUCTION PHOTOS OF EUT RJ45 XFRM Transformer: MINGTEK Report No.: 130725E01A Page 2 Reference No.: 140108E11 RJ45 XFRM Transformer: MYJWD Report No.: 130725E01A Page 3 Reference No.: 140108E11 Adapter: KSAS0451200350HU Report No.: 130725E01A Page 4 Reference No.: 140108E11 Report No.: 130725E01A Page 5 Reference No.: 140108E11 Adapter: MU42-1120350-A1 Report No.: 130725E01A Page 6 Reference No.: 140108E11

(Fig.1) FCC ID: Q87-EA6900V11 Label FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. REVAPPROVEDDATE REV SIZE DWG TITLE DWG NO. SCALESHEET REV A4A4 A 1/1 1 OF 1 SANDY CHEN CIHYI CHIU CIHYI CHIU 01/02/14 01/02/14 01/02/14 SANDY CHENARELEASE TO FILE01/02/14 4L-SAB5C33-003 4L-SAB5C33-003 DESCRIPTION REVISIONS PART NUMBER BLOCK PART NUMBER LABEL, PRODUCT, EA6900 V1.1, US/CA/AP/EM/EA, LINKSYS, SAB4-C5LABEL, PRODUCT, EA6900 V1.1, US/CA/AP/EM/EA, LINKSYS, SAB4-C5 SAB4-C5 WNC PROPRIETARY 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Tel: 886-3-6667799 Fax: 886-3-5788726 A NOTES: 1. MATERIAL: MATTE WHITE PET(金利寶HTYL50(EB)), T=0.05 FINISH: MATTE PET(金利寶TPATM(T)(36)H), T=0.026 GLUE: EMBOSSED ADHESIVE, T=0.035±0.003. 2. COLOR: a. BACKGROUND= PAPER COLOR (WHITE) b. PRINTING= P8402C-01 (WARM GRAY) 3. TEMPERATURE RESISTANT= -20~120 0 C. 4. ROLLED 5. PRINTING DIMENSIONS OF TOLERANCES: ±0.2 R 1.0, 8 PLS REV 913409 AGILE No. 1

Report No.: 130725E01A Page 1 Reference No.: 140108E11 CONSTRUCTION PHOTOS OF EUT RJ45 XFRM Transformer: MINGTEK Report No.: 130725E01A Page 2 Reference No.: 140108E11 Report No.: 130725E01A Page 3 Reference No.: 140108E11 Report No.: 130725E01A Page 4 Reference No.: 140108E11 Report No.: 130725E01A Page 5 Reference No.: 140108E11 Report No.: 130725E01A Page 6 Reference No.: 140108E11 RJ45 XFRM Transformer: MYJWD Report No.: 130725E01A Page 7 Reference No.: 140108E11 Report No.: 130725E01A Page 8 Reference No.: 140108E11 Report No.: 130725E01A Page 9 Reference No.: 140108E11 Report No.: 130725E01A Page 10 Reference No.: 140108E11

Report No.: SA130725E01A 1 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 RF EXPOSURE REPORT REPORT NO.: SA130725E01A MODEL NO.: EA6900 V1.1 FCC ID: Q87-EA6900V11 RECEIVED: July 26, 2013 TESTED: Jan. 17, 2014 ISSUED: Feb. 17, 2014 APPLICANT: Linksys LLC ADDRESS: 131 Theory Drive, Irvine, California, 92617 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130725E01A 2 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 7 Report No.: SA130725E01A 3 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130725E01A Original release Feb. 17, 2014 Report No.: SA130725E01A 4 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 1. CERTIFICATION PRODUCT: Linksys Smart Wi-Fi Router AC1900 BRAND NAME: Linksys MODEL NO.: EA6900 V1.1 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Linksys LLC TESTED DATE: Jan. 17, 2014 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: EA6900 V1.1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Feb. 17, 2014 ( Phoenix Huang, Specialist ) APPROVED BY : , DATE: Feb. 17, 2014 ( May Chen, Manager ) Report No.: SA130725E01A 5 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 26cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130725E01A 6 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table: Transmitter Circuit Brand Antenna Type Peak Gain(dBi) (Include cable loss ) Connecter Type Cable Loss (dB) Cable Length (mm) For 2.4GHz (2.4GHz to 2.4835GHz) For 5GHz (Band 1: 5.15 to 5.25GHz Band 4: 5.725 to 5.85GHz) Right Side Chain (0) Galtronics Dipole 1.3 5G Band1: 0.87 5G Band4: 1.95 R-SMA NA 168 In center Chain (1) Galtronics Dipole 1.1 5G Band1: 0.47 5G Band4: 1.55 R-SMA NA 262 Left Side Chain (2) Galtronics Dipole 1.1 5G Band1: 0.47 5G Band4: 1.55 R-SMA NA 260 Note: From the above antennas, Chain (0) was selected as representative antenna for the 802.11a/b/g test and its data was recorded in this report. Report No.: SA130725E01A 7 of 10 Report Format Version 5.0.0 Reference No.: 140108E11 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER Legacy/MIMO (CDD) with beam forming For 2.4GHz: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 802.11b 2412 - 2462 497.737 1.3 26 0.07904 1.00 802.11g 2412 - 2462 454.988 1.3 26 0.07225 1.00 CDD_MODE FREQUENCY BAND (MHz) MAX POWER (mW) ANT…

Text truncated - open the document above for the full version.

Report No.: RF130725E01A 1 of 160 Report Format Version 5.2.0 Reference No.: 140108E11 FCC TEST REPORT (15.247) REPORT NO.: RF130725E01A MODEL NO.: EA6900 V1.1 FCC ID: Q87-EA6900V11 RECEIVED: July 26, 2013 TESTED: July 26, 2013 to Jan. 17, 2014 ISSUED: Feb. 17, 2014 APPLICANT: Linksys LLC ADDRESS: 131 Theory Drive Irvine California 92617 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130725E01A 2 of 160 Report Format Version 5.2.0 Reference No.: 140108E11 Table of Contents RELEASE CONTROL RECORD..............................................................................6 1. CERTIFICATION ...........................................................................................7 2. SUMMARY OF TEST RESULTS ...................................................................8 2.1 MEASUREMENT UNCERTAINTY ................................................................9 3. GENERAL INFORMATION .........................................................................10 3.1 GENERAL DESCRIPTION OF EUT ............................................................10 3.2 DESCRIPTION OF TEST MODES ..............................................................14 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............15 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................19 3.4 DUTY CYCLE OF TEST SIGNAL................................................................20 3.5 DESCRIPTION OF SUPPORT UNITS ........................................................22 3.6 CONFIGURATION OF SYSTEM UNDER TEST .........................................23 4. TEST TYPES AND RESULTS (FOR 2.4GHz, 2.400 ~ 2.4835GHz BAND) .25 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................25 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................25 4.1.2 TEST INSTRUMENTS ................................................................................25 4.1.3 TEST PROCEDURES .................................................................................26 4.1.4 DEVIATION FROM TEST STANDARD .......................................................26 4.1.5 TEST SETUP ..............................................................................................26 4.1.6 EUT OPERATING CONDITIONS ................................................................27 4.1.7 TEST RESULTS (MODE 1) .........................................................................28 4.1.8 TEST RESULTS (MODE 2) .........................................................................30 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................32 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...32 4.2.2 TEST INSTRUMENTS ................................................................................33 4.2.3 TEST PROCEDURES .................................................................................34 4.2.4 DEVIATION FROM TEST STANDARD .......................................................34 4.2.5 TEST SETUP ..............................................................................................35 4.2.6 EUT OPERATING CONDITIONS ................................................................35 4.2.7 TEST RESULTS (MODE 1) .........................................................................36 4.2.8 TEST RESULTS (MODE 2) .........................................................................49 4.3 6DB BANDWIDTH MEASUREMENT ..........................................................55 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .......................................55 4.3.2 TEST INSTRUMENTS ................................................................................55 4.3.3 TEST PROCEDURE ...................................................................................55 4.3.4 DEVIATION FROM TEST STANDARD .......................................................55 4.3.5 TEST SETUP ..............................................................................................55 4.3.6 EUT OPERATING CONDITIONS ................................................................55 4.3.7 TEST RESULTS (MODE 1) ................................…

Text truncated - open the document above for the full version.

Report No.: RF130725E01A-1 1 of 77 Report Format Version 5.2.0 Reference No.: 140108E11 FCC TEST REPORT (15.407) REPORT NO.: RF130725E01A-1 MODEL NO.: EA6900 V1.1 FCC ID: Q87-EA6900V11 RECEIVED: July 26, 2013 TESTED: July 26, 2013 to Jan. 17, 2014 ISSUED: Feb. 17, 2014 APPLICANT: Linksys LLC ADDRESS: 131 Theory Drive Irvine California 92617 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130725E01A-1 2 of 77 Report Format Version 5.2.0 Reference No.: 140108E11 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 12 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 13 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 15 3.4 DUTY CYCLE OF TEST SIGNAL ......................................................................... 16 3.5 DESCRIPTION OF SUPPORT UNITS .................................................................. 20 3.6 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 21 4. TEST TYPES AND RESULTS ...........…

Text truncated - open the document above for the full version.