Q87-WRP400Wireless-G Broadband Router with 2 Phone Ports

Ãø楪 ±∫ ›±≤ ̈ª≤ ̈≠ ∑∑ ...∑ƪ¥ª≠≠ÛŸ fiƱøºæø≤º Œ± ́ ̈ªÆ ©∑ ̈∏ Ó –∏±≤ª –±Æ ̈≠ flæ± ́ ̈ Ã∏∑≠ Ÿ ́∑ºª∑ ◊Ω±≤ ‹ª≠ΩÆ∑∞ ̈∑±≤≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚ∑ —≤¥∑≤ª Œª≠± ́ÆΩª≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚ∑ ›±∞ßÆ∑π∏ ̈ ø≤º ÃÆøºª≥øÆμ≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚ∑ ›∏ø∞ ̈ªÆ ÔÊ –Ʊº ́Ω ̈ —™ªÆ™∑ª©Ì ⁄Ʊ≤ ̈ –ø≤ª¥ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌ fiøΩμ –ø≤ª¥ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ì ›∏ø∞ ̈ªÆ ÓÊ ...∑ƪ¥ª≠≠ ÕªΩ ́Æ∑ ̈ß ›∏ªΩμ¥∑≠ ̈Ï Ÿª≤ªÆø¥ “ª ̈©±Æμ ÕªΩ ́Æ∑ ̈ß Ÿ ́∑ºª¥∑≤ª≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÏ flºº∑ ̈∑±≤ø¥ ÕªΩ ́Æ∑ ̈ß Ã∑∞≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ï Î Õª ̈ ́∞ ‚ fiø≠∑Ω Õª ̈ ́∞ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Î Õª ̈ ́∞ ‚ ‹‹“ÕÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚË Õª ̈ ́∞ ‚ ”fl› flººÆª≠≠ ›¥±≤ªÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÁ Õª ̈ ́∞ ‚ flº™ø≤Ωªº Œ± ́ ̈∑≤π Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔ ...∑ƪ¥ª≠≠ ‚ fiø≠∑Ω ...∑ƪ¥ª≠≠ Õª ̈ ̈∑≤π≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÔ ...∑ƪ¥ª≠≠ ‚ ...∑ƪ¥ª≠≠ ÕªΩ ́Æ∑ ̈ß Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÓ ...∑ƪ¥ª≠≠ ‚ ...∑ƪ¥ª≠≠ ”fl› ⁄∑¥ ̈ªÆÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÔÏ ...∑ƪ¥ª≠≠ ‚ flº™ø≤Ωªº ...∑ƪ¥ª≠≠ Õª ̈ ̈∑≤π≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÎ ÕªΩ ́Æ∑ ̈ß ‚ ⁄∑ƪ©ø¥¥ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÍ ÕªΩ ́Æ∑ ̈ß ‚ –“ –ø≠≠ ̈∏Ʊ ́π∏ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÔÍ flΩΩª≠≠ Œª≠ ̈Æ∑Ω ̈∑±≤≠ ‚ ◊≤ ̈ªÆ≤ª ̈ flΩΩª≠≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÈ fl∞∞¥∑Ωø ̈∑±≤≠ ø≤º Ÿø≥∑≤π ‚ Õ∑≤𥪠–±Æ ̈ ⁄±Æ©øƺ∑≤πÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÔË fl∞∞¥∑Ωø ̈∑±≤≠ ø≤º Ÿø≥∑≤π ‚ –±Æ ̈ Œø≤πª ⁄±Æ©øƺÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÔË fl∞∞¥∑Ωø ̈∑±≤≠ ̇ Ÿø≥∑≤π ‚ –±Æ ̈ Œø≤πª ÃÆ∑ππªÆ∑≤π Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÁ fl∞∞¥∑Ωø ̈∑±≤≠ ø≤º Ÿø≥∑≤π ‚ ‹”∆ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÁ fl∞∞¥∑Ωø ̈∑±≤≠ ø≤º Ÿø≥∑≤π ‚ œ±Õ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓ flº≥∑≤∑≠ ̈Æø ̈∑±≤ ‚ ”ø≤øπª≥ª≤ ̈ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÓÓ flº≥∑≤∑≠ ̈Æø ̈∑±≤ ‚ ‘±π Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÌ flº≥∑≤∑≠ ̈Æø ̈∑±≤ ‚ ‹∑øπ≤±≠ ̈∑Ω≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÏ flº≥∑≤∑≠ ̈Æø ̈∑±≤ ‚ ⁄øΩ ̈±Æß ‹ª∫ø ́¥ ̈≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÓÎ flº≥∑≤∑≠ ̈Æø ̈∑±≤ ‚ ⁄∑Æ≥©øƪ À∞πÆøºª Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÎ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÎ Õ ̈ø ̈ ́≠ ‚ Œ± ́ ̈ªÆ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÍ Õ ̈ø ̈ ́≠ ‚ ‘±Ωø¥ “ª ̈©±Æμ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÍ Õ ̈ø ̈ ́≠ ‚ ...∑ƪ¥ª≠≠ “ª ̈©±Æμ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÈ fl∞∞ª≤º∑® flÊ ÃƱ ́楪≠∏±± ̈∑≤πÓË ÓÁ fl∞∞ª≤º∑® ›Ê ...øÆÆø≤ ̈ß ◊≤∫±Æ≥ø ̈∑±≤ÌÔ Ãø楪 ±∫ ›±≤ ̈ª≤ ̈≠ ∑∑∑ ...∑ƪ¥ª≠≠ÛŸ fiƱøºæø≤º Œ± ́ ̈ªÆ ©∑ ̈∏ Ó –∏±≤ª –±Æ ̈≠ fl∞∞ª≤º∑® ‹Ê Œªπ ́¥ø ̈±Æß ◊≤∫±Æ≥ø ̈∑±≤ÌÓ ⁄›› Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÓ ⁄›› Œøº∑ø ̈∑±≤ ¤®∞±≠ ́ƪ Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÓ Õø∫ª ̈ß “± ̈∑Ωª≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÓ ◊≤º ́≠ ̈Æß ›ø≤øºø Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÓ fl™∑≠ ºé◊≤º ́≠ ̈Æ∑ª ›ø≤øºøÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÌ ...∑ƪ¥ª≠≠ ‹∑≠Ω¥ø∑≥ªÆ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÌ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÌ À≠ªÆ ◊≤∫±Æ≥ø ̈∑±≤ ∫±Æ ›±≤≠ ́≥ªÆ –Ʊº ́Ω ̈≠ ›±™ªÆªº æß ¤À ‹∑ƪΩ ̈∑™ª ÓÓÒÁÍÒ¤› ±≤ ...ø≠ ̈ª ¤¥ªΩ ̈Æ∑Ω ø≤º ¤¥ªΩ ̈Ʊ≤∑Ω ¤Ø ́∑∞≥ª≤ ̈ ̄...¤¤¤ ̃ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÏ

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617(USA) Phone: ( 949 ) 823-3188 Fax: ( 949 ) 823-3002 Date:2007/6/20 General Declaration We, Cisco-Linksys LLC declares that device does not have “Ad Hoc on non-US frequencies” while applying for the follow product. FCC ID: Q87-WRP400 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! ------------------------------------------------------------------------------- Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617 (USA) Phone: 949-261-1288 Fax: 949-823-3002 Date:2007/6/20 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: Q87-WRP400 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 45 days after the grant letter released External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards ------------------------------------------------------------------------------ Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617(USA) Phone: ( 949 ) 823-3188 Fax: ( 949 ) 823-3002 Power of Attorney Date:2007/6/20 To whom it may concern: We, the undersigned Cisco-Linksys LLC hereby authorize Advance Data Technology Corporation (ADT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by ADT on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------------------- Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

(Fig. 1) FCC ID: Q87-WRP400 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page 3 Page 4 Page 5 Page 6 Page 7 Adapter Model No.: AD5V/2.5A-SW Page 8 Page 9 Adapter Model No.: PSM11R-050 Page 10

Report No.: SA960612H07 1 RF EXPOSURE REPORT REPORT NO.: SA960612H07 MODEL NO.: WRP400 FCC ID: Q87-WRP400 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Cisco-Linksys LLC ADDRESS: 121 Theory Drive Irvine, CA 92617 (USA) ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. Report No.: SA960612H07 2 RF Exposure Measurement 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A)Limits For Occupational / Control Exposures 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 6 1500-100,000 ... ... 1.0 30 F = Frequency in MHz Report No.: SA960612H07 3 3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance 20cm. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device Report No.: SA960612H07 4 6. Test Results 6.1 Antenna Gain The maximum Gain measured in Fully Anechoic Chamber is 2.0dBi or 1.58489 (numeric) 6.2 Output Power Into Antenna & RF Exposure value at distance 20cm: For Part 802.11b: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 134.896 0.043 1.0 6 2437 138.038 0.044 1.0 11 2462 131.826 0.042 1.0 For Part 802.11g: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 114.815 0.036 1.0 6 2437 131.826 0.042 1.0 11 2462 120.226 0.038 1.0

Report No.: RF960612H07 1 Report Format Version 2.0.5 FCC TEST REPORT REPORT NO.: RF960612H07 MODEL NO.: WRP400 RECEIVED: June 12, 2007 TESTED: June 15 to 16, 2007 ISSUED: June 28, 2007 APPLICANT: Cisco-Linksys LLC ADDRESS: 121 Theory Drive Irvine, CA 92617(USA) ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 64 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. No. 2177-01 Report No.: RF960612H07 2 Report Format Version 2.0.5 Table of Contents 1 CERTIFICATION..................................................................................................4 2 SUMMARY OF TEST RESULTS.........................................................................5 3 GENERAL INFORMATION..................................................................................6 3.1 GENERAL DESCRIPTION OF EUT....................................................................6 3.2 DESCRIPTION OF TEST MODES......................................................................8 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:......................9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS...................................11 3.5 DESCRIPTION OF SUPPORT UNITS..............................................................12 3.6 CONFIGURATION OF SYSTEM UNDER TEST...............................................13 4 TEST TYPES AND RESULTS...........................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT....................................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..................................15 4.1.2 TEST INSTRUMENTS.......................................................................................15 4.1.3 TEST PROCEDURES.......................................................................................16 4.1.4 TEST SETUP.....................................................................................................16 4.1.5 EUT OPERATING CONDITIONS......................................................................17 4.1.6 TEST RESULTS.................................................................................................18 4.2 RADIATED EMISSION MEASUREMENT..........................................................22 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.......................................22 4.2.2 TEST INSTRUMENTS.......................................................................................23 4.2.3 TEST PROCEDURES.......................................................................................24 4.2.4 TEST SETUP.....................................................................................................25 4.2.5 EUT OPERATING CONDITIONS......................................................................25 4.2.6 TEST RESULTS.................................................................................................26 4.3 6dB BANDWIDTH MEASUREMENT.................................................................33 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..............................................33 4.3.2 TEST INSTRUMENTS.......................................................................................33 4.3.3 TEST PROCEDURE..........................................................................................34 4.3.4 TEST SETUP.....................................................................................................34 4.3.5 EUT OPERATING CONDITIONS......................................................................34 4.3.6 TEST RESULTS.................................................................................................35 4.4 MAXIMUM PEAK OUTPUT POWER.................................................................41 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.................41 4.4.2 TEST INSTRUMENTS.......................................................................................41 4.4.3 TEST PROCEDURES.......................................................................................42 4.4.4 TEST SETUP.....................................................................................................42 4.4.5 EUT OPERATING CONDITIONS......................................................................42 Report No.: RF960612H07 3 Report Format Version 2.0.5 4.4.6 TEST RESULTS.................................................................................................43 4.5 POWER SPECTRAL DENSITY MEASUREMENT............................................45 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT..........................45 4.5.2 TEST INSTRUMENTS.......................................................................................45 4.5.3 TEST PROCEDURE..........................................................................................46 4.5.4 TEST SETUP.....................................................................................................46 4.5.5 EUT OPERATING CONDITIONS......................................................................46 4.5.6 TEST RESULTS.................................................................................................47 4.6 CONDUCTED EMISSION AND BAND EDGES MEASUREMENT....................53 4.6.1 LIMITS OF CONDTCTED EMISSION AND BAND EDGES MEASUREMENT.53 4.6.2 TEST INSTRUMENTS.......................................................................................53 4.6.3 TEST PROCEDURE..........................................................................................53 4.6.4 EUT OPERATING CONDITIO…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST