Q87-WUSB54GPWireless-G USB 2.0 Pen-type Network Adapter

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2003 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. LIMITED WARRANTY Linksys guarantees that every Wireless-G USB Network Adapter will be free from physical defects in material and workmanship for three years from the date of purchase, when used within the limits set forth in the Specifications section of this User Guide. If the product proves defective during this warranty period, call Linksys Technical Support in order to obtain a Return Authorization number. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. When returning a product, mark the Return Authorization number clearly on the outside of the package and include a copy of your original proof of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges. IN NO EVENT SHALL LINKSYS'S LIABILI TY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS OFFE RS NO REFUNDS FOR ITS PRODUCTS. Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to: Linksys P.O. Box 18558, Irvine, CA 92623. SAFETY AND REGULATORY NOTICES FCC STATEMENT The Wireless-G USB Network Adapter has been tested and found to comply with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any change or modification to the product not expressly approved by Linksys could void the user's authority to operate the device. FCC RF Radiation Exposure Statement To comply with the FCC and ANSI C95.1 RF exposure limits, the antenna(s) for this device must comply with the following: • This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2) and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific oper ations for satisfying RF exposure compliance. Note: Dual antennas used for diversity operation are not considered co-located. Canadian Department of Communications Industry Canada (IC) Notice This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B est conforme à la norme NMB-003 et CNR-210 du Canada. "To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing." " Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. " EC DECLARATION OF CONFORMITY (EUROPE) Linksys Group declares that the Instant Wireless ® Series products included in the Instant Wireless ® Series conform to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC, EMC directive 89/336/EEC, and Low Voltage directive 73/23/EEC: For 2.4 GHz devices with 100 mW radios, the following standards were applied: • ETS 300-826, 301 489-1 General EMC requirements for Radio equipment. • EN 609 50 Safety • ETS 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow. Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power leve…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Linksys WUSB54GP 921128R03 Page 2 Page 3

LABEL LOCATION FOR FCC ID

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

FCC ID: Q87-WUSB54GP Report No.921128R03 Operational Description This device is a Wireless-G USB 2.0 Pen-type Network Adapter which operates in the 2.4GHz frequency spectrum with throughput of up to 54Mbps which OFDM technique will be applied. If the signal to noise radio is too poor which could not support 54Mbps, the 11Mbps data rate with CCK technique will be applied. The transmitter of the EUT is powered by host equipment. The antenna is Dipole antenna without antenna connector. The other instruction, please have a look at the users manual.

FCC ID: Q87-WUSB54GP Report No.: RF921128R031Issued: Dec. 18, 2003 FCC TEST REPORT REPORT NO.: RF921128R03 MODEL NO.: WUSB54GP RECEIVED: Sep. 8, 2003 TESTED: Sep. 8 ~ Dec. 16, 2003 REPORT HOLDER: Cisco-Linksys, LLC ADDRESS: 17401 Armstrong Ave., Irvine, CA 92614 ISSUED BY: Advance Data Technology Corporation LAB LOCATION: 47 14th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. This test report consists of 73 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, NVLAP or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA Lab Code: 200102-0 FCC ID: Q87-WUSB54GP Report No.: RF921128R032Issued: Dec. 18, 2003 Table of Contents 1CERTIFICATION ........................................................................................... 4 2SUMMARY OF TEST RESULTS................................................................... 5 3GENERAL INFORMATION ........................................................................... 6 3.1GENERAL DESCRIPTION OF EUT.............................................................. 6 3.2DESCRIPTION OF TEST MODES................................................................ 7 3.3GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 7 3.4DESCRIPTION OF SUPPORT UNITS .......................................................... 8 3.5CONFIGURATION OF SYSTEM UNDER TEST........................................... 9 4TEST TYPES AND RESULTS..................................................................... 10 4.1CONDUCTED EMISSION MEASUREMENT .............................................. 10 4.1.1LIMITS OF CONDUCTED EMISSION MEASUREMENT............................ 10 4.1.2TEST INSTRUMENTS ................................................................................ 10 4.1.3TEST PROCEDURES..................................................................................11 4.1.4DEVIATION FROM TEST STANDARD ........................................................11 4.1.5TEST SETUP .............................................................................................. 12 4.1.6EUT OPERATING CONDITIONS................................................................ 12 4.1.7TEST RESULTS.......................................................................................... 13 4.2RADIATED EMISSION MEASUREMENT ................................................... 25 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT................................. 25 4.2.2TEST INSTRUMENTS ................................................................................ 26 4.2.3TEST PROCEDURES................................................................................. 27 4.2.4DEVIATION FROM TEST STANDARD ....................................................... 27 4.2.5TEST SETUP .............................................................................................. 28 4.2.6EUT OPERATING CONDITIONS................................................................ 28 4.2.7TEST RESULTS.......................................................................................... 29 4.2.8TEST RESULTS (For CCK)........................................................................ 31 4.2.9TEST RESULTS (For OFDM) ..................................................................... 34 4.36dB BANDWIDTH MEASUREMENT .......................................................... 37 4.3.1LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................ 37 4.3.2TEST INSTRUMENTS ................................................................................ 37 4.3.3TEST PROCEDURE ................................................................................... 38 4.3.4DEVIATION FROM TEST STANDARD ....................................................... 38 4.3.5TEST SETUP .............................................................................................. 38 4.3.6EUT OPERATING CONDITIONS................................................................ 38 4.3.7TEST RESULTS (For CCK)........................................................................ 39 FCC ID: Q87-WUSB54GP Report No.: RF921128R033Issued: Dec. 18, 2003 4.3.8TEST RESULTS (For OFDM) ..................................................................... 43 4.4MAXIMUM PEAK OUTPUT POWER .......................................................... 47 4.4.1LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT ........... 47 4.4.2TEST INSTRUMENTS ................................................................................ 47 4.4.3TEST PROCEDURES................................................................................. 48 4.4.4 DEVIATION FROM TEST STANDARD....................................................... 48 4.4.5 TEST SETUP .............................................................................................. 48 4.4.6 EUT OPERATING CONDITIONS ................................................................ 48 4.4.4TEST RESULTS (For CCK)........................................................................ 49 4.4.5TEST RESULTS (For OFDM) ..................................................................... 50 4.5POWER SPECTRAL DENSITY MEASUREMENT...................................... 51 4.5.1LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ................... 51 4.5.2TEST INSTRUMENTS ................................................................................ 51 4.5.3TEST PROCEDURE ................................................................................... 52 4.5.4DEVIATION FROM TEST STANDARD ....................................................... 52 4.5.5TEST SETUP .............................................................................................. 52 4.5.6EUT OPERATING CONDITIONS......................................…

Text truncated - open the document above for the full version.

FCC ID: Q87-WUSB54GP Report No.: SA921128R031Issued: December 18, 2003 SAR TEST REPORT REPORT NO.: SA921128R03 MODEL NO.: WUSB54GP RECEIVED: November 28, 2003 TESTED: December 17, 2003 APPLICANT: Cisco-Linksys, LLC ADDRESS: 17401 Armstrong Ave., Irvine, CA 92614 ISSUED BY: Advance Data Technology Corporation LAB LOCATION: 47 14th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. This test report consists of 30 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA FCC ID: Q87-WUSB54GP Report No.: SA921128R032Issued: December 18, 2003 Table of Contents 1.CERTIFICATION........................................................................................................................ 3 2.GENERAL INFORMATION........................................................................................................ 4 2.1GENERAL DESCRIPTION OF EUT.......................................................................................... 4 2.2GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 5 2.3GENERAL INOFRMATION OF THE SAR SYSTEM ................................................................. 5 2.4GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ............................... 9 3.DESCRIPTION OF TEST MODES AND CONFIGURATIONS................................................ 13 4.DESCRIPTION OF SUPPORT UNITS .................................................................................... 14 5.TEST RESULTS ...................................................................................................................... 15 5.1TEST PROCEDURES .............................................................................................................15 5.2MEASURED SAR RESULT ..................................................................................................... 16 5.3SAR LIMITS ............................................................................................................................. 17 5.4RECIPES FOR TISSUE SIMULATING LIQUIDS .................................................................... 17 5.5TEST EQUIPMENT FOR TISSUE PROPERTY...................................................................... 19 6.SYSTEM VALIDATION ............................................................................................................20 6.1TEST EQUIPMENT ................................................................................................................. 20 6.2TEST PROCEDURE................................................................................................................ 20 6.3VALIDATION RESULT............................................................................................................. 22 6.4SYSTEM VALIDATION UNCERTAINTIES .............................................................................. 23 7.MEASUREMENT SAR PROCEDURE UNCERTAINTIES ...................................................... 24 7.1PROBE CALIBRATION UNCERTAINTY ................................................................................. 24 7.2ISOTROPY UNCERTAINTY .................................................................................................... 24 7.3BOUNDARY EFFECT UNCERTAINTY ................................................................................... 25 7.4PROBE LINEARITY UNCERTAINTY ...................................................................................... 25 7.5READOUT ELECTRONICS UNCERTAINTY .......................................................................... 25 7.6RESPONSE TIME UNCERTAINTY ......................................................................................... 26 7.7INTEGRATION TIME UNCERTAINTY .................................................................................... 27 7.8PROBE POSITIONER MECHANICAL TOLERANCE ............................................................. 27 7.9PROBE POSITIONING............................................................................................................28 7.10 PHANTOM UNCERTAINTY..................................................................................................... 28 7.11 DASY4 UNCERTAINTY BUDGET........................................................................................... 29 8.INFORMATION ON THE TESTING LABORATORIES............................................................ 30 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION FCC ID: Q87-WUSB54GP Report No.: SA921128R033Issued: December 18, 2003 1. CERTIFICATION PRODUCT : Wireless-G USB 2.0 Pen-type Network Adapter MODEL NO. : WUSB54GP BRAND NAME : Linksys APPLICANT : Cisco-Linksys, LLC TEST ITEM : ENGINEERING SAMPLE STANDARDS : 47 CFR Part 2 (Section 2.1093), FCC OET Bulletin 65, Supplement C (01-01), RSS-102 We, Advance Data Technology Corporation, hereby certify that one sample of the designation has been tested in our facility on December 17, 2003. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate, and it was tested according to the standards listed above. This device was found to be in compliance with the Specific Absorption Rate (SAR) requirement specified in FCC part 2.1093 under General Population / Uncontrolled Exposure condition. FCC ID: Q87-WUSB54GP Report No.: SA921128R034Issued: December 18, 2003 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT PRODUCT Wireless-G USB 2.0 Pen-type Network Adapter MODEL NO. WUSB54GP POWER SUPPLY 5.0Vdc from host equipment C…

Text truncated - open the document above for the full version.

FCC ID: Q87-WUSB54GP Report No.: RF921128R0369Issued: Dec. 18, 2003 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode 1) FCC ID: Q87-WUSB54GP Report No.: RF921128R0370Issued: Dec. 18, 2003 CONDUCTED EMISSION TEST (Mode 2) FCC ID: Q87-WUSB54GP Report No.: RF921128R0371Issued: Dec. 18, 2003 RADIATED EMISSION TEST (Mode 1) FCC ID: Q87-WUSB54GP Report No.: RF921128R0372Issued: Dec. 18, 2003 RADIATED EMISSION TEST (Mode 2)