Q87-WUSB600NDual-Band Wireless-N USB Network Adapter

Ãø楪 ±∫ ›±≤ ̈ª≤ ̈≠ ∑∑ ‹ ́ø¥Ûfiø≤º ...∑ƪ¥ª≠≠Û“ ÀÕfi “ª ̈©±Æμ flºø∞ ̈ªÆ ›∏ø∞ ̈ªÆ ÔÊ –Ʊº ́Ω ̈ —™ªÆ™∑ª©Ô ‘¤‹ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ô ›∏ø∞ ̈ªÆ ÓÊ ...∑ƪ¥ª≠≠ ÕªΩ ́Æ∑ ̈ß ›∏ªΩμ¥∑≠ ̈Ó Ÿª≤ªÆø¥ “ª ̈©±Æμ ÕªΩ ́Æ∑ ̈ß Ÿ ́∑ºª¥∑≤ª≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÓ flºº∑ ̈∑±≤ø¥ ÕªΩ ́Æ∑ ̈ß Ã∑∞≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ó Ì ÿ±© ̈± flΩΩª≠≠ ̈∏ª ...∑ƪ¥ª≠≠ “ª ̈©±Æμ ”±≤∑ ̈±ÆÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌ ÿ±© ̈± À≠ª ̈∏ª ...∑ƪ¥ª≠≠ “ª ̈©±Æμ ”±≤∑ ̈±ÆÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌ Õ ̈ø ̈ ́≠ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ì ›±≤≤ªΩ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Í Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÔÓ fl∞∞ª≤º∑® flÊ ÃƱ ́楪≠∏±± ̈∑≤πÓÏ ÓÎ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÎ “ª© ...∑ƪ¥ª≠≠ ›±≤≤ªΩ ̈∑±≤ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓÎ ÓË Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÓË Ì fl∞∞ª≤º∑® ¤Ê ...øÆÆø≤ ̈ß ◊≤∫±Æ≥ø ̈∑±≤ÌÔ ‘∑≥∑ ̈ªº ...øÆÆø≤ ̈ßÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÔ ¤®Ω¥ ́≠∑±≤≠ ø≤º ‘∑≥∑ ̈ø ̈∑±≤≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÔ —æ ̈ø∑≤∑≤π ...øÆÆø≤ ̈ß ÕªÆ™∑Ωª Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÔ ÃªΩ∏≤∑Ωø¥ Õ ́∞∞±Æ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÓ fl∞∞ª≤º∑® ⁄Ê Œªπ ́¥ø ̈±Æß ◊≤∫±Æ≥ø ̈∑±≤ÌÌ ⁄›› Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÌ ⁄›› Œøº∑ø ̈∑±≤ ¤®∞±≠ ́ƪ Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÌ Õø∫ª ̈ß “± ̈∑Ωª≠ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÌ ◊≤º ́≠ ̈Æß ›ø≤øºø Õ ̈ø ̈ª≥ª≤ ̈ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÌ Œª≠ ̈Æ∑Ω ̈∑±≤≠ ∑≤ ̈∏ª Î Ÿÿ¶ fiø≤º Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÏ fl™∑≠ ºé◊≤º ́≠ ̈Æ∑ª ›ø≤øºøÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÏ ...∑ƪ¥ª≠≠ ‹∑≠Ω¥ø∑≥ªÆ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÏ Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú Ú ÚÌÏ À≠ªÆ ◊≤∫±Æ≥ø ̈∑±≤ ∫±Æ ›±≤≠ ́≥ªÆ –Ʊº ́Ω ̈≠ ›±™ªÆªº æß ¤À ‹∑ƪΩ ̈∑™ª ÓÓÒÁÍÒ¤› ±≤ ...ø≠ ̈ª ¤¥ªΩ ̈Æ∑Ω ø≤º ¤¥ªΩ ̈Ʊ≤∑Ω ¤Ø ́∑∞≥ª≤ ̈ ̄...¤¤¤ ̃ÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÌÎ SAR compliance has been established in typical laptop computer(s) with USB slots, and this product can be used in a typical laptop computer with USB slots. Other applications

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617(USA) Phone: ( 949 ) 823-3188 Fax: ( 949 ) 823-3002 Date:2007/11/27 General Declaration We, Cisco-Linksys LLC declares that device does not have “Ad Hoc on non-US frequencies” and/or “on DFS frequencies” while applying for the follow product. FCC ID: Q87-WUSB600N If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! ------------------------------------------------------------------------------- Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617 (USA) Phone: 949-261-1288 Fax: 949-823-3002 Date:2007/11/27 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: Q87-WUSB600N To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 45 days after the grant letter released External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards ------------------------------------------------------------------------------ Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Cisco-Linksys LLC 121 Theory Drive Irvine, CA 92617(USA) Phone: ( 949 ) 823-3188 Fax: ( 949 ) 823-3002 Power of Attorney Date:2007/11/27 To whom it may concern: We, the undersigned Cisco-Linksys LLC hereby authorize Advance Data Technology Corporation (ADT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C+E approval and any communication needed with the national authority. Any and all acts carried out by ADT on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------------------- Jennifer Yu / Program Manager Cisco-Linksys LLC Phone: 949-823-3188 Fax: 949-823-3002 [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC ID： ：： ：Q87-WUSB600N LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page 4 Page 5 Page 6

Report no.: SA961122H02 1 Report Format Version 2.0.6 SAR TEST REPORT REPORT NO.: SA961122H02 MODEL NO.: WUSB600N RECEIVED: Nov. 22, 2007 TESTED: Dec. 04 ~ Dec. 07, 2007 ISSUED: Dec. 11, 2007 APPLICANT: Cisco-Linksys LLC ADDRESS: 121 Theory Drive Irvine, CA 92617 (USA) ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 60 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report no.: SA961122H02 2 Report Format Version 2.0.6 TABLE OF CONTENTS 1. CERTIFICATION.......................................................................................................3 2. GENERAL INFORMATION.......................................................................................4 2.1 GENERAL DESCRIPTION OF EUT..........................................................................4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS............................................6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM..................................................7 2.4 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION................10 3. DESCRIPTION OF SUPPORT UNITS....................................................................14 4. DESCRIPTION OF TEST MODES AND CONFIGURATIONS.................................15 4.1. DESCRIPTION OF ANTENNA LOCATION..............................................................15 4.2. DESCRIPTION OF ASSESSMENT POSITION.......................................................16 4.3. DESCRIPTION OF TEST MODE.............................................................................17 4.4. SUMMARY OF TEST RESULTS.............................................................................19 5. TEST RESULTS......................................................................................................23 5.1 TEST PROCEDURES.............................................................................................23 5.2 MEASURED SAR RESULTS...................................................................................25 5.3 SAR LIMITS............................................................................................................36 5.4 RECIPES FOR TISSUE SIMULATING LIQUIDS.....................................................37 5.5 TEST EQUIPMENT FOR TISSUE PROPERTY.......................................................46 6. SYSTEM VALIDATION............................................................................................47 6.1 TEST EQUIPMENT.................................................................................................47 6.2 TEST PROCEDURE...............................................................................................48 6.3 VALIDATION RESULTS...........................................................................................50 6.4 SYSTEM VALIDATION UNCERTAINTIES...............................................................51 7. MEASUREMENT SAR PROCEDURE UNCERTAINTIES.......................................52 7.1. PROBE CALIBRATION UNCERTAINTY.................................................................52 7.2. ISOTROPY UNCERTAINTY....................................................................................53 7.3. BOUNDARY EFFECT UNCERTAINTY...................................................................53 7.4. PROBE LINEARITY UNCERTAINTY.......................................................................54 7.5. READOUT ELECTRONICS UNCERTAINTY...........................................................54 7.6. RESPONSE TIME UNCERTAINTY.........................................................................54 7.7. INTEGRATION TIME UNCERTAINTY....................................................................55 7.8. PROBE POSITIONER MECHANICAL TOLERANCE..............................................56 7.9. PROBE POSITIONING...........................................................................................56 7.10. PHANTOM UNCERTAINTY....................................................................................57 7.11. DASY4 UNCERTAINTY BUDGET (FOR 2.4GHz)...................................................58 7.12. DASY4 UNCERTAINTY BUDGET (FOR 5 ~ 6GHz)................................................59 8. INFORMATION ON THE TESTING LABORATORIES.............................................60 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report no.: SA961122H02 3 Report Format Version 2.0.6 1. CERTIFICATION PRODUCT: Dual-Band Wireless-N USB Network Adapter MODEL: WUSB600N BRAND: Linksys APPLICANT: Cisco-Linksys LLC TESTED : Dec. 04 ~ Dec. 07, 2007 TEST SAMPLE: R&D SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 IEEE 1528-2003 The above equipment (model: WUSB600N) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Dec. 11, 2007 Rennie Wang / Senior Specialist TECHNICAL ACCEPTANCE : , DATE: Dec. 11, 2007 Responsible for RF Stanely Hsu / Senior Engineer APPROVED BY : , DATE: Dec. 11, 2007 Gary Chang / Assistant Manager Report no.: SA961122H02 4…

Text truncated - open the document above for the full version.

1 APPENDIX A: TEST DATA Liquid Level Photo MSL 2450MHz D=155mm MSL 5800MHz D=154mm 2 MSL 5800MHz D=151mm MSL 5800MHz D=151mm 3 Date/Time: 2007/12/4 10:56:27 Test Laboratory: Advance Data Technology NX6125-11b-Ch1-M01 DUT: Dual-Band Wireless-N USB Network Adapter ; Type: WUSB600N ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.94 mho/m; ε r = 54.8; ρ = 1000 kg/m 3 ; Liquid level : 155 mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 23.1 degrees ; Liquid temp. : 22.2 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3506 ; ConvF(7.67, 7.67, 7.67) ; Calibrated: 2007/3/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2007/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 53 ; Postprocessing SW: SEMCAD, V1.8 Build 172 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.265 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.2 V/m Peak SAR (extrapolated) = 0.624 W/kg SAR(1 g) = 0.271 mW/g; SAR(10 g) = 0.123 mW/g Maximum value of SAR (measured) = 0.420 mW/g 4 Date/Time: 2007/12/4 11:13:07 Test Laboratory: Advance Data Technology NX6125-11b-Ch6-M01 DUT: Dual-Band Wireless-N USB Network Adapter ; Type: WUSB600N ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.97 mho/m; ε r = 54.6; ρ = 1000 kg/m 3 ; Liquid level : 155 mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 23.1 degrees ; Liquid temp. : 22.2 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3506 ; ConvF(7.67, 7.67, 7.67) ; Calibrated: 2007/3/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2007/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 53 ; Postprocessing SW: SEMCAD, V1.8 Build 172 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.322 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.5 V/m Peak SAR (extrapolated) = 0.760 W/kg SAR(1 g) = 0.328 mW/g; SAR(10 g) = 0.147 mW/g Maximum value of SAR (measured) = 0.507 mW/g 5 Date/Time: 2007/12/4 11:29:28 Test Laboratory: Advance Data Technology NX6125-11b-Ch11-M01 DUT: Dual-Band Wireless-N USB Network Adapter ; Type: WUSB600N ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2 mho/m; ε r = 54.2; ρ = 1000 kg/m 3 ; Liquid level : 155 mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 23.1 degrees ; Liquid temp. : 22.2 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3506 ; ConvF(7.67, 7.67, 7.67) ; Calibrated: 2007/3/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2007/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 53 ; Postprocessing SW: SEMCAD, V1.8 Build 172 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.354 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.9 V/m Peak SAR (extrapolated) = 0.891 W/kg SAR(1 g) = 0.380 mW/g; SAR(10 g) = 0.168 mW/g Maximum value of SAR (measured) = 0.589 mW/g 6 Date/Time: 2007/12/4 11:46:19 Test Laboratory: Advance Data Technology NX6125-11g-Ch1-M02 DUT: Dual-Band Wireless-N USB Network Adapter ; Type: WUSB600N ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: BPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.94 mho/m; ε r = 54.8; ρ = 1000 kg/m 3 ; Liquid level : 155 mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 23.1 degrees ; Liquid temp. : 22.2 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3506 ; ConvF(7.67, 7.67, 7.67) ; Calibrated: 2007/3/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2007/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 53 ; Postprocessing SW: SEMCAD, V1.8 Build 172 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.634 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.1 V/m Peak SAR (extrapolated) = 1.54 W/kg SAR(1 g) = 0.656 mW/g; SAR(10 g) = 0.292 mW/g Maximum value of SAR (measured) = 1.02 mW/g 7 Date/Time: 2007/12/4 12:16:09 Test Laboratory: Advance Data Technology NX6125-11g-Ch6-M02 DUT: Dual-Band Wireless-N USB Network Adapter ; Type: WUSB600N ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: BPSK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.97 mho/m; ε r = 54.6; ρ = 1000 kg/m 3 ; Liquid level : 155 mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 23.1 degrees ; Liquid temp. : 22.2 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3506 ; ConvF(7.67, 7.67, 7.67) ; Calibrated: 2007/3/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 20…

Text truncated - open the document above for the full version.

B - 1 APPENDIX B: ADT SAR MEASUREMENT SYSTEM C - 1 APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION D1: SAM PHANTOM D2: DOSIMETRIC E-FIELD PROBE D3: DAE D4: SYSTEM VALIDATION DIPOLE

Report No.: RF961122H02 1 Report Format Version 2.0.5 DFS TEST REPORT REPORT NO.: RF961122H02 MODEL NO.: WUSB600N (refer to item 3.1 for more details) RECEIVED: Nov. 22, 2007 TESTED: Dec 17, 2007 ISSUED: Dec 17, 2007 APPLICANT: Cisco-Linksys LLC ADDRESS: 121 Theory Drive Irvine, CA 92617(USA) ISSUED BY: Advance Data Technology Corporation TEST LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF961122H02 2 Report Format Version 2.0.5 Table of Contents 1. LAB DECLARATION..........................................................................................................3 2. EUT INFORMATION..........................................................................................................4 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT.................................................4 2.2 EUT SOFTWARE AND FIRMWARE VERSION..................................................................4 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT................................................4 2.4 EUT MAXIMUM AND MINIMUM CONDUCTED POWER...................................................5 2.5 EUT MAXIMUM AND MINIMUM E.I.R.P. POWER..............................................................5 2.6 STATEMENT OF MAUNFACTURER..................................................................................5 3. U-NII DFS RULE REQUIREMENTS...................................................................................6 3.1 WORKING MODES AND REQUIRED TEST ITEMS..........................................................6 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS.........................................................7 4. TEST & SUPPORT EQUIPMENT LIST..............................................................................9 4.1 TEST INSTRUMENTS.......................................................................................................9 4.2 DESCRIPTION OF SUPPORT UNITS...............................................................................9 5. TEST PROCEDURE........................................................................................................10 5.1 ADT DFS MEASUREMENT SYSTEM:.............................................................................10 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL:...........................................11 5.3 DEVIATION FROM TEST STANDARD.............................................................................12 5.4 CONDUCTED TEST SETUP CONFIGURATION..............................................................12 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE.............................................................12 6. TEST RESULTS..............................................................................................................13 6.1 SUMMARY OF TEST RESULT........................................................................................13 6.2 DETELED TEST RESULTS.............................................................................................14 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE.14 6.2.1.1 DFS DETECTION THRESHOLD.....................................................................................14 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME.............................15 6.2.1.3 NON-OCCUPANCY PERIOD...........................................................................................20 6.2.1.4 NON-ASSOCIATED TEST...............................................................................................21 7. TESTING LABORATORIES INFORMATION....................................................................22 8. APPENDIX.....................................................................................................................A-1 8.1 APPENDIX-A..................................................................................................................A-1 Report No.: RF961122H02 3 Report Format Version 2.0.5 1. LAB DECLARATION PRODUCT: Dual-Band Wireless-N USB Network Adapter BRAND NAME: Linksys MODEL NO.: WUSB600N TEST SAMPLE: R&D SAMPLE TESTED: Dec 17, 2007 APPLICANT: Cisco-Linksys LLC STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96 The above equipment (Model: WUSB600N) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Dec. 17, 2007 ( Midoli Peng, Specialist ) TECHNICAL ACCEPTANCE : , DATE: Dec. 17, 2007 Responsible for RF ( Hank Chung, Deputy Manager ) APPROVED BY : , DATE: Dec. 17, 2007 (May Chen, Deputy Manager ) Report No.: RF961122H02 4 Report Format Version 2.0.5 2. EUT INFORMATION 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT Table 1: Operating frequency bands and mode of EUT. Operating Frequency Range Operational Mode 5250~5350MHz 5470~5725MHz Client without radar detection ̧ ̧ 2.2 EUT SOFTWARE AND FIRMWARE VERSION Table 2: The EUT software/firmware version. No. Product Model No. Software/Firmware Version 1 Wireless-N USB Adapter WUSB600N Driver Version: 1.0.4.0 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT Table 3: Antenna list. Ant No. Antenna Type Operation Frequency Range Max. Gain(dBi) 1 PCB Print 5.15 – 5.85 GHz 4 Report No.: RF961122H02 5 Report Format Version 2.0.5 2.4 EUT MAXIMUM AND MINIMUM CONDUCTED POWER Ta…

Text truncated - open the document above for the full version.

Report No.: RF961122H02 1 Report Format Version 2.0.6 FCC TEST REPORT (15.247) REPORT NO.: RF961122H02 MODEL NO.: WUSB600N RECEIVED: Nov. 22, 2007 TESTED: Nov. 24 to Dec. 05, 2007 ISSUED: Dec. 10, 2007 APPLICANT: Cisco-Linksys LLC ADDRESS: 121 Theory Drive Irvine, CA 92617(USA) ISSUED BY: Advance Data Technology Corporation TEST LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 163 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. No. 2177-01 Report No.: RF961122H02 2 Report Format Version 2.0.6 Table of Contents 1. CERTIFICATION....................................................................................................6 2. SUMMARY OF TEST RESULTS............................................................................7 2.1 MEASUREMENT UNCERTAINTY.............................................................................9 3. GENERAL INFORMATION...................................................................................10 3.1 GENERAL DESCRIPTION OF EUT.....................................................................10 3.2 DESCRIPTION OF TEST MODES.......................................................................12 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.............13 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................17 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................18 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................18 4. TEST TYPES AND RESULTS (802.11b & g, 2400 ~ 2483.5MHz Band)...............19 4.1 CONDUCTED EMISSION MEASUREMENT........................................................19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................19 4.1.2 TEST INSTRUMENTS................................................................................19 4.1.3 TEST PROCEDURES.................................................................................20 4.1.4 DEVIATION FROM TEST STANDARD.......................................................20 4.1.5 TEST SETUP..............................................................................................21 4.1.6 EUT OPERATING CONDITIONS................................................................21 4.1.7 TEST RESULTS..........................................................................................22 4.2 RADIATED EMISSION MEASUREMENT.............................................................24 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................24 4.2.2 TEST INSTRUMENTS................................................................................25 4.2.3 TEST PROCEDURES.................................................................................26 4.2.4 DEVIATION FROM TEST STANDARD.......................................................26 4.2.5 TEST SETUP..............................................................................................27 4.2.6 EUT OPERATING CONDITIONS................................................................27 Below 1GHz Test Data.....................................................................................................28 4.2.7 TEST RESULTS..........................................................................................28 Above 1GHz Test Data.....................................................................................................29 4.2.8 TEST RESULTS..........................................................................................29 4.3 6dB BANDWIDTH MEASUREMENT....................................................................57 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT........................................57 4.3.2 TEST INSTRUMENTS................................................................................57 4.3.3 TEST PROCEDURE...................................................................................58 4.3.4 DEVIATION FROM TEST STANDARD.......................................................58 4.3.5 TEST SETUP..............................................................................................58 4.3.6 EUT OPERATING CONDITIONS................................................................58 Report No.: RF961122H02 3 Report Format Version 2.0.6 4.3.7 TEST RESULTS..........................................................................................59 4.4 MAXIMUM PEAK OUTPUT POWER....................................................................71 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...........71 4.4.2 INSTRUMENTS..........................................................................................71 4.4.3 TEST PROCEDURES.................................................................................72 4.4.4 DEVIATION FROM TEST STANDARD.......................................................72 4.4.5 TEST SETUP..............................................................................................72 4.4.6 EUT OPERATING CONDITIONS................................................................72 4.4.7 TEST RESULTS....................…

Text truncated - open the document above for the full version.