Q9MDM-AV10DIGITAL PRESENTATION DEVICE

POTABLE AV PLAYER Owner’s Instructions DM-AV10 Before using this product, please read the security instructions first and bear them in mind when using the product. Safety Instructions Safety Instructions 2 Read the safety instructions below before using the player. • Do not overload the outlet with many power cords at a time. (It may cause the generation of abnormal heat and/or fire.) • Do not excessively bend the power cord or be squeezed by heavy objects. (It may cause fire.) • Do not handle the power plug with wet hands. (It may cause electric shock.) • Plug the player properly so that it can be stable. (If it is not properly plugged, it may cause fire.) • Never disassemble or modify the player in any way. • Do not let chemicals, such as benzene, thinner, and etc., come in contact with the player. • Do not use the player near a magnetic material (magnet, and etc.). • Do not let dirt or foreign materials go in the player. • Avoid using the player in a place where has high temperature (40°... or higher) or low tempera- ture (5°... or lower), or has much moisture. • Do not drop the player or give a shock. • Keep the player away from a place where has severe vibration or a magnetic material. • Interruption by electromagnetic wave may damage the player. Be sure to completely untie the adaptor cable before using it. • Avoid using the player near a direct ray of light or heat-generating device. • Avoid using the player near a place where has much dirt or soot. • Unplug the power cord when cleaning the adaptor. • Do not drop the adaptor or give a severe shock. • Do not use another adaptor (Use a supplied adaptor.) Warning Caution Notes when using an earphone Traffic safety • Do not use the earphone while riding a bicycle or driving a car or motorcycle. It is not only danger- ous, but also illegal depending on the region. If the earphone is used while walking on the road, especially keeping its volume high on the crosswalk is very dangerous. Protection for hearing ability • Do not keep the earphone volume high. Most doctors point out that keeping the volume high for a long time is very harmful to ears. • If ears ring, turn down the volume or stop using the earphone. Environmental information • Separate packing materials, batteries, and/or old electronic products when disusing. • Packing materials are classified into cardboard, polyethylene, and etc. Unnecessary packing mate- rials have not been used for this player. Table of Contents Table of Contents 3 Description of each part.................................................................................................................. 4 Viewing an external source............................................................................................................. 6 Viewing video ................................................................................................................................. 7 Viewing an image ........................................................................................................................... 8 Listening to the music ..................................................................................................................... 9 Using a setup menu ..................................................................................................................... 10 Connecting an external component and USB .............................................................................. 13 Setting and using a transcode ...................................................................................................... 14 Miscellaneous .............................................................................................................................. 20 Specifications .............................................................................................................................. 22 Accessories Owner’s InstructionsLithium ion batteryInstallation CD (Transcoder program) Power cableVideo/Audio cables USB cableAC adaptorEarphoneHand strapCarrying case Overview Overview 4 Overview 5 1LCD window 2Charge indication lamp:This lights on when the battery is charged by the input of DC power or connecting a USB cable. 3REC button:Use to record an external input signal. 4REPEAT button:Use to repeat playback. 5MENU button:Use to return to the menu screen. 6VOL -,+ buttons:Use to adjust the volume. SLIDE TIME buttons:Use to select a showing time of the slide show. 7(Power/Stop) button:Use to turn on or off the power of the main set, or use to stop play- back. 8(JOG/Select/Play/Pause/Search/Skip) button JOG ():Move it left or right to go to, search, or skip the desired position in the menu. SELECT ():Use to select a menu, or play/pause the player. 9AV IN (external input) jack:Use to connect an external component. 10DC IN (DC power input) jack:Use to input power. 11SD CARD insertion slot 12Charger insertion slot 13USB Connection jack 14NTSC/PAL switch:Use to select a display system. 15HOLD switch:If the HOLD function is set, the player does not operate even in the entry of another button during playback. 16LCD ON/OFF switch:Use to turn on or off the LCD window. 17Headphone jack:Use to connect a headphone. 1840° TILT:Use to install a hand strap. 1915° TILT:Use to install a hand strap. Viewing an External Source Operation INPUT MODE Recording an External Input Signal 6 This player allows you to view an external input signal. For connection of an external component, see page 13. After moving to "INPUT MODE" by using the JOG key, press the JOG key. The external component that is being currently connected will play and the playback screen will be displayed. Press the MENU button to exit. The menu screen will be displayed. ŒŒ Press the REC button. ́ ́ After moving to the file format that you want to record by using the JOG key, press the JOG key. The Recording screen will appear and recording will start. To stop while recording, press the STOP button. • If there is no exte…

Text truncated - open the document above for the full version.

Using a Setup Menu Operation 12 • FORMAT INTERNAL:Use to delete all the files in the built-in memory. EXTENDED:Use to delete all the files in the external SD card. MEMORY FORMAT • BRIGHTNESS Use to adjust the brightness of the LCD window. • CONTRAST Use to adjust the sharpness of the LCD window. PICTURE SETUP The Setup menu will disappear and the menu screen will be dis- played. SETUP EXIT SETUP EXIT PICTURE BRIGHTNESS CONTRAST LCD BRIGHTNESS SETUP MEMORY FORMAT FORMAT INTERNAL EXTENDED Connecting an External Component and USB Connection 13 Connecting an AV Component • Connect a Video/Audio cable between the A/V component (DVD/VCR) and the player. • Connect an USB cable between a PC (Windows ME, Windows 2000, Windows XP) and the player. • Enter Windows Explorer after USB is recognized by the PC. • This player is displayed as a portable disc in the list of folders of Windows Explorer. • Methods of copying or deleting a file with a portable disc are same with the using meth- ods in Windows. A/V component (DVD/VCR)Right side of the player Video/Audio cable Connecting USB PC Left side of the player USB cable • When moving, copying, or deleting a file through USB, remove the USB after making sure that the USB con- nection message window disap- pears. During the connection of USB, all the buttons on this player do not operate. Note Installing and Using Transcoder Installing and Using Transcoder 14 Using Environment [PC requirements] • Pentium III 500 MHz at least • Memory: 256MB at least • Microsoft DirectX supported VGA • Sound card-required [OS] • Microsoft Windows ME/Windows 2000/Windows XP [Codec] • Divx 5.1.1, Divx 4.01, Divx 4.11, or Divx 4.12 Visit at the web site http://www.divx.com/divx/?src=toptab_divx_from_/index.php and download the Standard Divx codec for installation. • DivxG400 or DirectVobSub • Combined codec for the execution of media files [Others] • Microsoft DirectX 8.0 at least Installing and Using Transcoder 15 Installing Transcoder Executing Transcoder Insert the supplied installation CD and execute "DMTransCoder.EXE". 1 Select "Next". 2 As shown in the figure right, the process of pro- gram installation is displayed. 3 After installation is complete, select "Finish" to end installation. 4 Select the menus at the right bottom of Windows in the following sequence: "Start"  "Program (P)"  "DMProject" "DMTCoder". Or double click "DMTCoder()" on the Windows background screen. Installing and Using Transcoder Installing and Using Transcoder 16 Configuration and Function of Transcoder Screen ŒŒ ́ ́ ˇˇ ˆˆ ØØ ∏∏”” ̈ ̈ ŒŒ Menu ́ ́ Function icon ˇˇ File search window:This has the same function as Windows Explorer. ̈ ̈ File list window:This has the same function as Windows Explorer. ˆˆ Transcoded files list window:The files to be transcoded are displayed. ØØ Location where the transcoded files are saved:This displays the location where the transcoded files are saved. ∏∏ Capacitance of memory:This displays the capacitance of the location where the transcoded files are saved. ”” Display of transcoding progress:This displays the progress rate. Installing and Using Transcoder 17 • File - New schedule: Calls a new file in the list of transcoded files. - Open schedule: Applies the saved *dmt files in the list of transcoded files. - Save: Saves the contents of the operation which is under progress. in the list of transcoded files. - Save As: Saves as another name. - Exit: Exits the program. • Build - Starts transcoding. • Option - Caption: If there is a caption file, whether to apply or not will be determined. - Media file: Only media files are applied in the list. - Media Info: Displays the files which can play without change. This is not available in any version after Windows XP. - Return: Re-applies the file. - Saving path: Applies the path of a file to be transcoded. • Help - - Guides product information and the whole web site. Menu - New schedule: Builds a new list of transcoded files. - Open schedule: Calls a list of saved transcoded files. - Save: Saves the contents of the list of transcoded files under operation. - Start File Switching: Starts the schedule which is applied to the list of transcoded files. Tool Bar New schedule Open schedule Save Start File Switching Installing and Using Transcoder Installing and Using Transcoder 18 Transcoding files Select the location where has a file to be transcoded in the File Search window. 1 Drag a file to be transcoded in the File List window and move it into the Transcoded Files List window. Select the "Transcoding ()" function icon for execution. 2 3 The cursor in blue will be located on the file under transcoding and transcoding will proceed. 4 After transcoding is complete, the transcoded file will be saved in the specified location. The default folder is "C:\My Media". 5 The transcoded file can play by downloading it with a portable disc. 6 Installing and Using Transcoder 19 Note • If Codec does not exist, the player will notice you through a message window. The message win- dow disappears three seconds later and an icon in red appears on the list. • If the saving space is not enough, the player will notice you through a message window. The mes- sage window disappears three seconds later and an icon in red appears on the list. • If Caption does not exist, the player will operate without caption. • If any version after Windows XP is used, the menu on media information cannot be used. (The function is not supplied by MS.) • DivX Codec can be installed only after the user downloads Freeware. • If Inter Video Sound Codec has been installed, the player may not play normally. • Select either DirectVobSub or DivXG400 as a caption filter. (DirectVobSub is recommended) 20 Miscellaneous Miscellaneous Battery and Power • Since this player adopts an exclusive lithium icon battery, it can charge itself and buff itself speedi- ly within about two hours while it is completely discharged. • When video plays while the player is buffed, the player …

Text truncated - open the document above for the full version.

J3 SD C A R D SO CKET J1 JTAG &UART U1 128 MBit s SD RA M 4M X 32 Key P a d SW1~SW 6 SW10 AV P LAYER ( D M - AV10) BLOCK DIAGRAM U3 16M Bits NOR F lash U50 2 LCD Timing P V I - 10 04 B 3 . 5I n c h TF T L C D U3 CPU&DS P TM S3 20D SC 25 U4 128 MByte NAND FLASH U50 7 Vi deo Interface RB5 P 00 50 M I2S ( McB S P0 ) 15V, -15V U5 USB 2 .0 Co ntro lle r NET2 27 0 CCI R6 56 8bit 23V(B/ L ) Li- i on Battery 3.7V, 110 0m A 3.3V1.8V5V U9 Audio CODEC TLV320AIC23 U7 Vi deo Decoder TVP51 50 U15 DC/DC Converter MAX 156 6 U15 Battery Cha r ger MAX 187 4 J4 Ear p hone J5 AV IN J401 DC I N 5V ,2.0A J2 USB J2 USB

<Front Photo of EUT> <Rear Photo of EUT> <Controller and buttons of EUT> <Switches and Ear Phone Jack of EUT> <Memory Slot and External Jacks of EUT> < Adaptor of EUT >

PORTABLE AV PLAYER MPEG4/MP3 Recorder & Player Digital Photo wallet and viewer MODEL NO : DM-AV10 FCC ID : Q9MDM-AV10 Manufactured : DM Technology Co., Ltd

< Inner Photo of EUT> < Front Photo of Main Board > < Rear Photo of Main Board > < Front Photo of Memory Slot Board > < Rear Photo of Memory Slot Board >

EMI TEST REPORT Emission of electromagnetic disturbance Test Report No. : ERI-FCC04-0009 Equipment : AV PLAYER Name of basic model : DM-AV10 Family model : None Manufacturer : GUANGZHOU DEBAO YUCHANG ELECTRONICS CO.,Ltd Applicant : D.M. Technology Co., Ltd. Tested date : 2004. 2. 2 – 2. 3 Issued date : 2004. 2. 7 Test results : PASS Test Standards : FCC Part 15 Subpart B (Class B) /digital devices & peripherals Test Procedure and Items: - AC Power line Conducted emissions measurement : ANSI C63.4-1992 - Radiated emissions measurement : ANSI C63.4-1992 Tested by: GWEON, HUR Approved by: SANG-KYU, LEE The results in this report apply only to the sample tested. This test report shall not be reproduced except in full, without the written approval of ERI Laboratory. HPF#UHVHDUFK#LQVWLWXWH# EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 2 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 CONTENTS 1. CLIENT INFORMATION 2. LABORATORY INFORMATION 3. EQUIPMENT UNDER TEST INFORMATION(EUT) 3.1 Identification of the EUT 3.2 Additional information about the EUT 3.3 Peripheral equipment 4. CONTINUOUS DISTURBANCE VOLTAGE, MAIN TERMINAL 4.1 Operating environment 4.2 Test set-up and test procedures 4.3 Test instrument 4.4 Test results(Play mode) 4.5 Test results(Upload mode) 4.6 Test results(Download mode) 5. RADIATED DISTURBANCE & VOLTAGE AT THE ANTENNA TERMINALS 5.1 Operating environment 5.2 Test set-up 5.3 Test conditions 5.4 Test instrument 5.5 Test results(Play mode) 5.6 Test results(Upload mode) 5.7 Test results(Download mode) APPENDIX (None) EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 3 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 1. CLIENT INFORMATION The EUT has been tested by request of : Company : D.M. Technology Co., Ltd. Address : 5 th F1., Mando Bldg. 730 Dang-dong, Gunpo, Kyunggi-do, Korea 435-010 Name of contact : TONG-JIN, PARK Telephone : + 82-31-451-4526 Facsimile : + 82-31-451-4520 2. LABORATORY INFORMATION The 10m full-anechoic chamber and/or EMC facilities are used for these testing. These facilities were accredited by KOLAS, EK, MIC of Korea and FCC of USA. Address ELECTROMAGNETIC RESEARCH INSTITUTE. 66-6, JEIL-RI, YANGJI-MYUN, YOUNGIN-CITY, KYUNGGI-DO, KOREA Telephone No. : +82-31-336-1186~7 Facsimile No. : +82-31-336-1184 Registered No. KOLAS : 111 EK : J MIC : KR0030 FCC Filing No. : 302567 3. EQUIPMENT UNDER TEST INFORMATION(EUT) 3.1 Identification of the EUT Type of equipment : AV PLAYER Model name : DM-AV10 Brand name : ALVA Manufacturer : GUANGZHOU DEBAO YUCHANG ELECTRONICS CO.,Ltd Address : DONGSI BUILDING, HONGTU, INDUSTRIAL ZONE, LICUN VILLAGE, DASHI TOWN, PANYU CITY, UANGDONG, CHINA Telephone : + 86-20-3456-1885 Facsimile : + 86-20-3456-1811 Country of origin : CHINA Rating : AC110V, 60Hz EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 4 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 3.2 Additional information about the EUT Class B, Family model list; None 3.3 Peripheral equipment Defined as equipment needed for correct operation of the EUT. Description Model No. Serial No. Manufacture AC/DC adaptor PW137KA500N53 - AULT KOREA Corp. Note pc CM2080 5Y17JNZ9R892 LG AC/DC adaptor ADP-60DB MJD0124008516 Delta electronics Co., Ltd. Earphone - - - Keyboard SDM4510UH 4M020619 - Mouse X05-53748 4600 IntelliMouse Printer CG4127A CN13V1B1SZ HP EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 5 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 4. CONTINUOUS DISTURBANCE VOLTAGE, MAIN TERMINAL : Frequency range 0.15 MHz to 30 MHz 4.1 Operating environment Temperature : 22.0 °C Relative Humidity : 32.0 % 4.2 Test set-up and test procedures The mains terminal disturbance voltage was measured with the equipment under test(EUT) in a shield room. The EUT was connected to an artificial mains network(LISN) placed on the floor. The EUT was placed on non-metallic table 0.4m above the metallic, grounded floor. The distance to other metallic surface was at least 0.8m. Amplitude measurements were performed with a quasi-peak detector and an average detector. 4.3 Operation Conditions Play, download, upload mode 4.4 Test instrument Instrument Model No Serial No. Makers Next cal.date Used Test receiver ESCS30 100020 R&S 2004. 3. 25 x ESH3-Z5 827246/008 R&S 2004. 3. 19 x L.I.S.N. ESH3-Z5 831887/018 R&S 2004. 3. 19 Shield room 8 × 6 × 3.3m/H - - - x Shield Room AC Main Note PC LISN EUT LISN Earphone AC/DC adaptor Mouse Keyboard AC/DC adaptor Printer EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 6 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 4.4 Test results(Play mode) Date of test: Feb 02, 2004. An overview sweep performed with peak detector & average detector are included in the report as test reports. Frequency Tested LISN Meter Range Freq. Reading Limits Margin QP AV QP AV QP AV [MHz] [MHz] [dBuV] [dBuV] [dBuV] 0.198 H 52.6 43.8 63.7 53.7 11.1 9.9 0.297 H 41.4 31.9 60.3 50.3 18.9 18.4 0.15-30 2.370 H 36.5 33.6 56.0 46.0 19.5 12.4 3.650 H 35.8 32.6 56.0 46.0 20.2 13.4 4.540 H 35.7 32.6 56.0 46.0 20.3 13.4 6.220 H 35.2 32.4 60.0 50.0 24.8 17.6 7.700 H 33.4 29.8 60.0 50.0 26.6 20.2 26.760 H 33.5 23.7 60.0 50.0 26.5 26.3 * <5 : mean less than 5dB * Other frequency keep over 20dB margin. Result: Pass The measured emissions level of the EUT have found the below of the specified limit. EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 7 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184 [Live line] [Neutral line] EMC RESEARCH INSTITUTE File No. ERI-FCC04-0009 Page 8 of 14 E R I, 66-6, Jeil-Ri, Yangji-Myun, Yongin-City, Kyunggi-Do, Korea Tel: +82-31-336-1186~7 Fax: +82-31-336-1184…

Text truncated - open the document above for the full version.

<FRONT PHOTO OF RAIDIATED DISTURBANCE > <REAR PHOTO OF RADIATED DISTURBANCE > <FRONT PHOTO OF CONTINUOUS DISTURBANCE VOLTAGE > <SIDE PHOTO OF CONTINUOUS DISTURBANCE VOLTAGE >