QGH-WSCRWSC

Northwest EMC TCB Compliance Opinion Rev. 12/08/09 LEVT0032 Information about the Applicant Grantee (Company Name) Leviton Manufacturing Company FCC Contact Person Frank Tse Address 20497 SW Teton Avenue City, State, Zip Tualatin, OR 97062 Job Number LEVT0032 Model WSCR FCC ID QGH-WSCR Agent Approval Type Original Equipment Class DXX Part 15, Low Power Communication Device Transmitter Rule Part 15.231 Overview This application is for a wireless occupancy sensor authorized under FCC part 15.231. The device operates at 315 MHz with a single whip antenna soldered to PCB trace. Confidentiality requested for allowed files. Request is properly addressed and referenced. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Dave Tolman, TCB Committee 4/29/2010

EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 [email protected] www.enocean.com Managing Directors: Markus Brehler, Uwe Thumm Registered Court Munich HRB 139781 VAT Reg.No. DE813355588 Account: HypoVereinsbank München No. 2440610 Bank Code 700 202 70 EnOcean GmbH Kolpingring 18a 82041 Oberhaching/Germany Armin Anders VP Product Marketing Phone +49 89 6734 689 33 Fax +49 89 6734 689 55 Mobile +171 228 2856 [email protected] To Whom It May Concern: We hereby respectfully request that under the provision of 47 CFR 0.459, the documents listed below and attached with this application for certification be provided with confidential status. • Schematics.pdf • Operational Description.pdf • Frequency Block Diagrams.pdf Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Armin Anders VP Product Marketing FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Date: November 16, 2008 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A.

MATCH ARROW ON BASE WITH ARROW ON THE TWIST-LOCK BACK COVER. TWIST UNTIL RATCHET ACTION INDICATES ENGAGEMENT. MOUNTING DIRECTIONS: TWIST - LOCK PATENT PENDING 0XA0616890001 US Technical Support 1-800-959-6004 Assembled in Mexico WIRELESS OCCUPANCY SENSOR Catalog No. WSC 0415 FCC ID: QGH-WSCR IC: 2437A-WSCR IC MODEL WSCR LEVITON PART NUMBER 0XA0616890001 B A A B 1 2 3 4 3 2 1 4 Copyright 2009. Unpublished. All Rights Reserved. ± ± .2 mm .1 mm METRIC .X .XX ANGLES: ± .01 .005 INCH ± ± .XX .XXX 1/2° CHGDAPVD ECO NUMBER DATEREV. ENGRG MFG SCALE:2:1 THIRD ANGLE PROJECTION TOLERANCES CHK BY DWN BY The information in this document is the exclusive PROPRIETARY property of LEVITON MFG. CO., INC. It is disclosed with the understanding that acceptance or review by the recipient constitutes an undertaking by the recipient: (1) to hold this information in strict confidence. (2) not to disclose, duplicate, copy, or use the information, in whole or in part, for any purpose other than that for which disclosed. UNLESS OTHERWISE SPECIFIED: DO NOT SCALE DRAWING. ALL DIMENSIONS ARE IN INCHES. ALL ANGLES ARE IN DEGREES. B SIZE REV DWG NO. STATUS: ALL PRINTED COPIES ARE UNCONTROLLED TITLE: PROJECT NO. SHEET 1 OF 1 - - -- - - -- - - -- - 04/19/2010 TDHTDH B - -- - 04/19/2010TDH RY704/19/2010 Wireless OCC Label Product ID S3O04/19/2010 12/08/2009TDH B ECO Work In Progress ORA0616-D01 PROJ-02673 A - - -

Leviton Manufacturing Company WSCxx-IRW Report No. LEVT0032 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2010 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Last Date of Test: April 07, 2010 Leviton Manufacturing Company Model: WSCxx-IRW Emissions Test Description Specification Test Method Pass/Fail Spurious Radiated Emissions FCC 15.231:2010 ANSI C63.10:2009 Pass Spurious Radiated Emissions FCC 15.205:2010 ANSI C63.10:2009 Pass Duty Cycle FCC 15.231:2010 ANSI C63.10:2009 Pass Occupied Bandwidth FCC 15.231:2010 ANSI C63.10:2009 Pass Field Strength of Fundamental FCC 15.231:2010 ANSI C63.10:2009 Pass AC Powerline Conducted Emissions FCC 15.207:2010 ANSI C63.10:2009 Pass Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada (Site filing #2834D-1). Approved By: Don Facteau, IS Manager NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 06/29/09 Revision Number Description Date Page Number 00 None Barometric Pressure The recorded barometric pressure has been normalized to sea level. Accreditations and Authorizations FCC Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP Northwest EMC, Inc. is accredited under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 2004/108/EC, and ANSI C63.4. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. NVLAP LAB CODE 200629-0 NVLAP LAB CODE 200630-0 NVLAP LAB CODE 200676-0 NVLAP LAB CODE 200761-0 NVLAP LAB CODE 200881-0 Industry Canada Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS-Gen, Issue 2 and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. (Site Filing Numbers - Hillsboro: 2834D-1, 2834D-2, Sultan: 2834C-1, Irvine: 2834B-1, 2834B-2, Brooklyn Park: 2834E-1) CAB Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. NEMKO Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Accreditations and Authorizations Australia/New Zealand The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). VCCI Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, G-84, C-2687, T-1658, and R-2318, Irvine: R-1943, G-85, C- 2766, and T-1659, Sultan: R-871, G-83, C-1784, and T-1511, Brooklyn Park: R-3125, G-86, G-141, C-3464, and T-1634). BSMI Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement (US0017). License No.SL2-IN-E-1017. GOST Northwest EMC, Inc. has been assessed and accredited by the …

Text truncated - open the document above for the full version.

NORTHWEST EMC DUTY CYCLE XMit 2010.01.14 NORTHWEST EMC OCCUPIED BANDWIDTH XMit 2010.01.14 NORTHWEST EMC FIELD STRENGTH OF FUNDAMENTAL PSA 2008.07.21 NORTHWEST EMC FIELD STRENGTH OF FUNDAMENTAL PSA 2008.07.21 NORTHWEST EMC SPURIOUS RADIATED EMISSIONS PSA 2008.07.21 NORTHWEST EMC SPURIOUS RADIATED EMISSIONS PSA 2008.07.21 NORTHWEST EMC CE 001.jpg CE 002.jpg AC Powerline Conducted Emissions PSA-ESCI 2010.02.16 NORTHWEST EMC CE 003.jpg AC Powerline Conducted Emissions PSA-ESCI 2010.02.16