QIE05X7-0XUSB Interface Device

0656-01 2 ZCU000 Specifications P/D 082903 HomePro by ADVANCED CONTROL TECHNOLOGIES, INC. Note: This product does not support "sleep" mode or "power saver" mode on computers. This insures that the controller will always maintain communication with Z-Wave enable devices. If you experience a problem, please read the following: Installation: Connect the ZCU000 to a USB port on the computer. Follow the instructions on the screen and insert the CD with the USB drivers and third party software. Follow instructions contained in the third party manual or installation documents provided on the CD. Problem: Computer Does Not Shut Down Properly if "Selective Suspend" Is Enabled The information in this article applies to: · Microsoft Windows XP Home Edition · Microsoft Windows XP Professional Symptoms After you attach a USB-based input device (such as a keyboard or mouse) to your computer, your computer may no longer shut down properly. For example, your computer may stop responding (hang) after you click Turn off or Restart. Cause This issue can occur when selective-suspend functionality is enabled on a device that does not support it. This situation can occur when two or more USB-based devices have the same vendor and product identification numbers, and only one of the devices supports the selective-suspend functionality. Workaround To work around this issue, disable power management of the USB hub. NOTE: Although the following procedure may enable your computer to shut down properly, it may also reduce battery life on a laptop computer. To disable power management on the USB hub: Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. Double-click the Universal Serial Bus controllers branch to expand it, right-click USB Root Hub, and then click Properties. Click the Power Management tab. Click to clear the box Allow the computer to turn off this device to save power check, then click OK, and then quit Device Manager. FCC NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

HomePro Computer Interface Model No. ZCU000 Ser. # USB, Bus Powered No serviceable parts inside. For indoor use only. Canada IC: 4436A-06X70X FCC ID:Qie05X7-0X 908.42 MHz Made in China ACT ZCU000 Bottom Label Advanced Control Technologies, Inc. Indianapolis, IN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

DSH, Datasheet ZM1220 Z-Wave Module Document Part Number: 903501205 Document Revision: 01.05 Description: Datasheet for the Integrated Z-Wave Module based on ZW0102 Z-Wave Single Chip. Two versions are described within this document, US version (908.42MHz) and a EU version (868.42MHz). Written By: Thomas Jørgensen Date: February 5, 2003 Reviewed By: MVO, OPP, JFP, MHA, TBA, LAF, NTJ, TCA Audience: For R&D internal and R&D external distribution Internal R&D File Name: ZW0102_ZwaveModule.dsh.001.01.05.doc Approved by: Authority Date Niels T. Johansen, R&D 2/5-2003 This document is the property of Zensys A/S. The data contained herein, in whole or in part, may not be duplicated, used or disclosed outside the recipient for any purpose other than to conduct technical evaluation. This restriction does not limit the recipient’s right to use information contained in the data if it is obtained from another source without restriction. CONFIDENTIAL DSH, Datasheet 903501205 May 1, 2003 Zensys A/S ZM1220 Z-Wave Module Page 2 of 15 CONFIDENTIAL REVISION RECORD Doc. Rev Date By Pages affected Brief description of changes 00.01 May 15, 2002 TJO ALL Initial Draft 01.00 June 13, 2002 TJO ALL First release 01.01 August 19, 2002 TJO 7, 9, 11, 12, 16 Table 2: “AD1: Can be used as voltage reference input” removed Section 4.2.4: “external voltage reference” removed Table 5: RF receiver sensitivity updated Table 6: “Absolute Maximum Ratings” updated Table 7: Updated Chapter 6: Reference 1 updated 01.02 September 20, 2002 TJO All, 21 “Z-Wave RF Controller” changed to “ZW0102 Single Chip” Table 5: Typical RF sensitivity changed from –92dBm to –94dBm Table 7: TX power consumption added. 01.03 November 29, 2002 TJO 12, 16 Table 6: “Operating Temperature” updated Table 7: “Operating Temperature” and “Operating Relative Humidity” Page 12: references updated. 01.04 February 5, 2003 TJO All “ZW0102 Z-Wave Module” replaced with “ZM1220 Z-Wave Module”. Section 4.14 added 01.05 May 1, 2003 TJO 11, 12 Table 4: Crystal data updated Table 7: Operating temperature extended (-10 to +85°C) DSH, Datasheet 903501205 May 1, 2003 Zensys A/S ZM1220 Z-Wave Module Page 3 of 15 CONFIDENTIAL Table of Contents 1 ABBREVIATIONS.............................................................................................................................................4 2 INTRODUCTION..............................................................................................................................................4 2.1 Purpose.................................................................................................................................................................4 2.2 Audience and Prerequisites..................................................................................................................................4 3 PRODUCT DESCRIPTION..............................................................................................................................5 3.1 Overview..............................................................................................................................................................5 4 HW SPECIFICATIONS....................................................................................................................................7 4.1 Application Connector Specification....................................................................................................................7 4.2 Application Connector Signals.............................................................................................................................8 4.2.1 GPIO Pins.................................................................................................................................................8 4.2.2 UART.......................................................................................................................................................8 4.2.3 SPI Interface.............................................................................................................................................8 4.2.4 Analog-to-Digital Converter.....................................................................................................................9 4.2.5 TRIAC & ZEROX....................................................................................................................................9 4.2.6 Pulse Width Modulator Output.................................................................................................................9 4.3 Real-Time-Clock..................................................................................................................................................9 4.4 EEPROM..............................................................................................................................................................9 4.5 Reset.....................................................................................................................................................................9 4.6 Power..................................................................................................................................................................10 4.7 Antenna..............................................................................................................................................................10 4.8 Z-Wave Module Programming...........................................................................................................................10 4.9 MCU Specification.............................................................................................................................................11 4.10 ZW0102 Single Chip Peripherals.......................................................................................................................11 4.11 RF Specification............................................................…

Text truncated - open the document above for the full version.

Regulatory Test Documentation (RTD) Test Report, RF, E500465-1, 7023 Document Part Number: 905101801 Document Revision: 01.01 Description: Test report from Danish Delta, E500465-1. RF tests of the ZW0102 US Z-Wave Module, carried out in accordance with FCC CFR47, Part 15 Subpart C – Intentional Radiators. Test was carried out on a ZM1220 US Standard Z-Wave Module, but is considered applicable for the ZM1220-RE Z- Wave Module as well. Note that the report refers to the earlier name “ZW0102 Z- Wave Module” Written By: Delta, Vagn Sylvest Date: May 8, 2003 Reviewed By: Tom Calsen & Didier Clement Audience: For R&D internal and R&D external distribution Approved by: Authority Date Tom Carlsen, R&D May 8, 2003 This document is the property of Zensys A/S. The data contained herein, in whole or in part, may not be duplicated, used or disclosed outside the recipient for any purpose other than to conduct technical evaluation. This restriction does not limit the recipient's right to use information contained in the data if it is obtained from another source without restriction. CONFIDENTIAL Regulatory Test Documentation (RTD) 905101801 May 8, 2003 REVISION RECORD Doc. Rev Date By Pages affected Brief description of changes 01.00 20020919 TCA ALL Initial Release 01.01 20030508 TCA FrontPage FrontPage updated with new Names for Z-Wave Modules. No changes in report from Delta. Zensys A/S Test Report, RF, E500465-1, 7023 page 2 CONFIDENTIAL 20dan-uk-i DELTA Danish Electronics, Light & Acoustics Venlighedsvej 4 DK-2970 Hørsholm Denmark Tel. (+45) 72 19 40 00 Fax (+45) 72 19 40 01 www.delta.dk This report is issued under the rules of DANAK (Danish Accreditation). Further information about DANAK can be found at www.danak.dk. The report must not be reproduced, except in full, without the written approval of DELTA. Test Report DANAK Reg. no. 19 Emission tests to FCC requirements of ZW0102 US Z-Wave module Performed for Zensys A/S DANAK-196364 Project no.: E500465-1 Page 1 of 13 5 annexes 2002-08-16 DANAK-196364 DELTA-E500465-1 Page 2 of 13 VS/BLJ Title Emission tests to FCC requirements of ZW0102 US Z-Wave module Test object ZW0102 US Z-Wave module Report no. DANAK-196364 Project no. E500465-1 Test period 2002-07-10 - 2002-07-11 Client Zensys A/S Emdrupvej 26 2100 Copenhagen Ø Denmark Telephone: +45 70 20 99 40 Fax: +45 70 20 99 50 Contact person Mr. Tom Carlsen Manufacturer Zensys A/S Specifications 47 CFR Part 15, Subpart C - Intentional Radiators Results The equipment under test was in compliance with the requirements Test personnel Henrik Nielsen Date 2002-08-16 Responsible Vagn Sylvest Project Manager - EMC DELTA DANAK-196364 DELTA-E500465-1 Page 3 of 13 VS/BLJ Table of contents Page 1. Summaries 4 1.1 Technical report summary 4 1.2 Summary of tests 5 2. Test specimen 6 2.1 Test object – ZW0102 US Z-Wave Tx-only 6 2.2 Test object – ZW0102 US Z-Wave Rx-only 6 2.3 Auxiliary equipment - Z-Wave Evaluation Module Rev. 2 7 2.4 Auxiliary equipment - Power supply 7 3. General test conditions 8 3.1 Test set-up 8 4. Test and results 9 4.1 Conducted emission, AC mains (FCC Part 15, Subpart C) 9 4.2 Radiated electromagnetic field (FCC Part 15, Subpart C) 10 4.3 Occupied bandwidth 12 4.4 Peak output field strength 12 Annex 1 List of instruments (1 page) Annex 2 Photos (2 pages) Annex 3 Test record sheets regarding conducted emission (2 pages) Annex 4 Test record sheets regarding radiated emission (7 pages) Annex 5 Occupied bandwidth / Peak output power (2 pages) DANAK-196364 DELTA-E500465-1 Page 4 of 13 VS/BLJ 1. Summaries 1.1 Technical report summary The tests reported in this document have been performed to demonstrate compliance with the requirements of FCC Part 15 Section 15.249 "Rules for transmitters in band 902 - 928 MHz". This report contains measurement data from tests performed at DELTA, Hørsholm, Denmark, a FCC listed and DANAK accredited test laboratory. 1.1.1 Applicable FCC rules for test 47 CFR Part 15, Subpart C - Intentional Radiators §15.207 Conducted limits §15.209 Radiated emission limits, general requirements §15.215 Additional provisions to the general radiated emission limitations §15.249 Operation within the bands 902 - 928 MHz, 2400 - 2583.5 MHz. The methods and procedures have been applied as specified in §15.31 Measurements standards. This points to the following procedure, used during the measurements in this report: ANSI C63.4:1992 Methods of Measurement of Radio-Noise Emis- sions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. Furthermore, the requirements of the following have been applied: § 15.33 Frequency range of radiated measurements § 15.35 Measurement detector functions and bandwidths. DANAK-196364 DELTA-E500465-1 Page 5 of 13 VS/BLJ 1.2 Summary of tests The results of the emission tests can be summarised as follows: Tests of Intentional Radiator Key references to requirement FCC Part 15 Subpart C Conducted emission, AC mains § 15.207 Passed Radiated electromagnetic field emission §15.209 Passed Radiated emission limits, additional provisions §15.215 and §15.249 Passed Emission in restricted bands §15.205 Passed Abbreviations Passed : The requirements are met. Failed : The requirements are not met. Not done : No test was performed. N/A : Not applicable. Not relevant : The test was not relevant for the test object. The test results relate only to the specimen tested. DANAK-196364 DELTA-E500465-1 Page 6 of 13 VS/BLJ 2. Test specimen The test object can on the air interface receive and transmit data on 908.42 MHz. The carrier is FSK modulated with a shift of 40 kHz at a data rate of 9600 bits/s. The gal- vanic interface constitutes of a 20 pin connector, carrying DC power for the module, se- rial Tx data and serial Rx data. The test object is plugged directly onto a Z-Wave Evaluation Module, the purpose of which is to convert 9 VDC to 3.3 VDC for the Z-Wave module. During test two Z-Wave modules were used, one programmed to Rx-only and the oth…

Text truncated - open the document above for the full version.