QLM0010208Portable Wireless Audio System

Aerielle 'Bug' Transmitter Manual Introduction Thank you for purchasing the AudioBUG™ from ATO. AudioBug™ is a user-friendly portable wireless audio system that lets you enjoy your music collection while on the go. Audio BUG features Aerielle’s ™ patented wireless technology to send high-fidelity stereo audio signals from any audio device to any radio or stereo within range up to 15 feet. Simply plug the AudioBUG™ into any audio output source, choose one of the four frequencies (88.1, 88.3, 88.5 or 88.7 MHz) that you wish to broadcast and tune your radio to that frequency. AudioBUG™ gives you the freedom to enjoy your audio where you want, with out the wires. Before You Begin Read these instructions thoroughly before setting up your AudioBUG™. If you need any assistance, please contact customer service department at: 1-866-959-5999, or submit an email request to: [email protected] Compatibility One of the many unique features of AudioBUG™ is that it was designed to work with any portable audio device. This means that no matter what brand or size of audio player you may have, AudioBUG™ is compatible. Typical uses for AudioBUG™ include: Portable MP3 digital audio players Portable CD players Portable Mini-disc players Portable DVD players Laptop or Desk Top Computers AudioBUG™ is not only compatible with every audio player, but it will broadcast to any radio or stereo. Whether it is your surround sound stereo system in your family or living room or on your car stereo, AudioBUG™ just plugs and plays. AudioBUG™ Features and Components 1. Power on 2. Frequency Selector 3. 3.5 mm stereo cable 4. Battery Compartment “CR2” < Insert Photo of AudioBUG with markings and descriptive indications (i.e. arrows etc. > Auto-Off Functionality The AudioBUG™ has an auto-off feature. If after more than 80 seconds there is no detection of audio, the AudioBUG™ will turn off. This saves useful battery life. When turning off your audio source, your AudioBUG™ turns off automatically. Setup Procedure Setting up your AudioBUG™ is an easy procedure. Simply: 1) Remove the battery cover from the top of unit by gently sliding the battery door marked toward you. 2) Install 1 CR2 battery with the negative end facing the eyes of the AudioBUG™. 3) Plug the 3.5mm stereo cable into the audio out connector or the headphone jack of the audio source you wish to transmit. * 4) Select the frequency that you wish to transmit to with the selector on the side of the AudioBUG™ (88.1, 88.3, 88.5, 88.7 MHz) 5) Press the POWER button eye (left EYE) on the front of the unit. 6) Tune your FM stereo to the corresponding FM frequency as selected in step # 5 7) Adjust the volume on your audio player and stereo or headphone radio for maximum enjoyment. *Some audio sources output level is either to high or to low at the line-out jack. If it is to high, the sound might be distorted. If it is to low, the sound might be to noisy. If this happens, connect the AudioBUG™ to the headphone jack and adjust the volume level on your audio device. Frequently Asked Questions about AudioBUG™ Q: What is an AudioBUG™? A: AudioBUG™ is the newest product offering from ATO, a consumer electronics manufacturer. The AudioBUG™ was developed by Aerielle Group International Inc. an audio consumer electronics company. It is a portable audio transmitter that connects to any audio source and broadcasts that audio to any radio stereo within 5-15 ft. Q: How can I achieve maximum performance and sound quality form AudioBUG™? 1) Maintain fresh batteries 2) Keep AudioBUG™ within 5-10feet of the radio that it is transmitting to. 3) Keep the cord that connects the AudioBUG™ to the audio player straight, positioning the player as far from the AudioBUG™ as possible. 4) Before using the AudioBUG™, listen to 88.1, 88.3, 88.5, 88.7 FM on your radio and use the frequency with the least amount of interference. Warranty Information: ATO provides a 90 day warranty for this product and will promptly repair or replace any product shown to be defective during this warranty period. In order to return a defective product, you must contact ATO at: 1-866-959- 5999, or submit an email request to: [email protected] to receive a Return Merchandise Authorization (RMA) number. This number MUST be display on your mailing label. You will also be given instructions on how to package and return the defective unit. THIS WARRANY DOES NOT APPLY TO AUDIOBUG THAT HAS BEEN DAMAGED AS A RESULT OF IMPROVER MAINTENANCE, ACCIDENTS, IMPROPER VOLTAGE SUPPLY, OR OTHER MISUE. THE WARRANTY IS ALSO VOID IF THE OWNER REPAIRS OR MODIFIES THE PRODUCT IN ANY WAY. ATO IS NOT LIABLE FOR ANY INCIDDENTAL OR CONSEQUENTIAL DAMAGES WITH REGARD TO THIS PRODUCT. THE WARRANTY EXCLUDES ANY LIABILITY OTHER THAN WHAT IS STATED ABOVE. NO OTHER WARRANTIES ARE GIVEN. Legal rights vary from state to state. Some states do no allow the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. Important note: Use only CR2 batters as power for AudioBUG™. Use of any other power supply will void this warranty. Specifications: Modulation: FM Stereo Modulation Frequencies: 88.1, 88.3, 88.5, 88.7 MHz Audio Input Connector 3.5mm Stereo Plug Power Requirement 1 “CR2” Lithium Battery Battery Life 40+ hrs typical FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by ATO may void the users authority to operate this equipment. Email: [email protected] Webiste: www.antonio.com Phone: 1-866-959-5999 Made in CHINA Copyright 2002 ATO All Rights Reserved. Aerielle™ and AudioBUG™ are trademarks of Aerielle Group International Inc. Covered under U. S. Patent No. 5,771,441 and other p…

Text truncated - open the document above for the full version.

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Letter Of Agency September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Antonio Precise Products Manufactory Ltd. authorizes Elliott Labs to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date) Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com FCC Labeling Requirements and Information September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: FCC Labeling Requirements FCC ID: QLM0010208 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date) Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Request for Confidentiality September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: QLM0010208 Please be advised that the following information is to be held confidential and behalf of Antonio Precise Products Manufactory Ltd.: • Operational/Product Description/Technical Description • Block Diagram • Schematics • PCB Pictures The application contains technical information, which Antonio Precise Products Manufactory Ltd. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date) Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Manufacturer’s Letter September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: QLM0010208 To Whom It May Concern: Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date)

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Request for Confidentiality September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: QLM0010208 Please be advised that the following information is to be held confidential and behalf of Antonio Precise Products Manufactory Ltd.: • Operational/Product Description/Technical Description • Block Diagram • Schematics • PCB Pictures The application contains technical information, which Antonio Precise Products Manufactory Ltd. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date)

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Letter Of Agency September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Antonio Precise Products Manufactory Ltd. authorizes Elliott Labs to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date)

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 URL : http://www.antonio.com Request for Confidentiality September 10, 2002 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: QLM0010208 Please be advised that the following information is to be held confidential and behalf of Antonio Precise Products Manufactory Ltd.: • Operational/Product Description/Technical Description • Block Diagram • Schematics The application contains technical information, which Antonio Precise Products Manufactory Ltd. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Antonio Precise Products Manufactory Ltd. By: Thomas J. Palamara, US Operations 09/10/02 (Typed Name and Title) (Date)

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 1 of 4 Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 2 of 4 Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 3 of 4 Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 4 of 4

FCC ID Label Artwork Label Position and How It Will Be Affixed to the Device

FCC ID Label Artwork Label Position and How It Will Be Affixed to the Device

Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 1 of 3 Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 2 of 3 Room1314 - 1316, 13/F., BLOCK B, YAU TONG INDUSTRIAL CITY, 17 KO FAI ROAD, YAU TONG, KOWLOON, HONG KONG Tel: (852) 2772-3101 Fax: (852) 2775-5718 / 2775-7861 Email: [email protected], [email protected] URL : http://www.antonio.com 3 of 3

File: R45036 September 10, 2002 American TCB 6731 Whittier Avenue, Suite C110 McLean, VA. 22101 Gentlemen: The enclosed documents constitute a formal submittal and application for a Grant of Equipment Authorization pursuant to Subpart C of Part 15 of FCC Rules (CFR 47) regarding intentional radiators. Data within this report demonstrates that the equipment tested complies with the FCC limits for intentional radiators. Elliott Laboratories, as duly authorized agent prepared this submittal. A copy of the letter of our appointment as agent is enclosed. If there are any questions or if further information is needed, please contact Elliott Laboratories for assistance. Sincerely, David W. Bare Chief Technical Officer DWB/dmg Enclosures: Agent Authorization Letter Emissions Test Report with Exhibits File: R48544 Page 1 of 11 Electromagnetic Emissions Test Report and Application for Grant of Equipment Authorization pursuant to FCC Part 15, Subpart C Specifications for an Intentional Radiator ATO Model: Aerielle - 1 FCC ID: QLM0010208 GRANTEE: ATO 47 Peach Street Lane Mt. Sinai, NY 11766 TEST SITE: Elliott Laboratories, Inc. 684 W. Maude Avenue Sunnyvale, CA 94086 REPORT DATE: September 10, 2002 FINAL TEST DATE: June 7, 2002 AUTHORIZED SIGNATORY: ______________________________ David W. Bare Chief Technical Officer This report shall not be reproduced, except in its entirety, without the written approval of Elliott Laboratories, Inc. Elliott Laboratories, Inc. -- EMC Department Test Report Report Date: September 10, 2002 File: R48544 Page 2 of 11 pages TABLE OF CONTENTS COVER PAGE...................................................................................................................................................................................1 TABLE OF CONTENTS..............................................................................................................................................................2 SCOPE............................................................................................................................................................................................3 OBJECTIVE...................................................................................................................................................................................3 STATEMENT OF COMPLIANCE..............................................................................................................................................3 EMISSION TEST RESULTS.......................................................................................................................................................4 LIMITS OF CONDUCTED INTERFERENCE VOLTAGE.....................................................................................................4 LIMITS OF RADIATED FIELD STRENGTH........................................................................................................................4 BANDWIDTH............................................................................................................................................................................4 MEASUREMENT UNCERTAINTIES....................................................................................................................................4 EQUIPMENT UNDER TEST (EUT) DETAILS..........................................................................................................................5 GENERAL...................................................................................................................................................................................5 ENCLOSURE..............................................................................................................................................................................5 SUPPORT EQUIPMENT...........................................................................................................................................................5 EXTERNAL I/O CABLING.......................................................................................................................................................5 EUT OPERATION.....................................................................................................................................................................5 TEST SITE......................................................................................................................................................................................6 GENERAL INFORMATION.....................................................................................................................................................6 RADIATED EMISSIONS CONSIDERATIONS....................................................................................................................6 MEASUREMENT INSTRUMENTATION..................................................................................................................................7 RECEIVER SYSTEM..................................................................................................................................................................7 INSTRUMENT CONTROL COMPUTER...............................................................................................................................7 LINE IMPEDANCE STABILIZATION NETWORK (LISN)................................................................................................7 FILTERS/ATTENUATORS......................................................................................................................................................8 ANTENNAS...............................................................................................................................................................................8 ANTENNA MAST AND EQUIPMENT TURNTABLE.................................................................................…

Text truncated - open the document above for the full version.

Test Configuration Photographs