QTZ1200W

Airespace

802.11 Dual Band Access Point

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Jun 19, 2004
Application Purpose: Original Equipment
Date of Application: Jun 19, 2004
Equipment Note: 802.11 Dual Band Access Point
Frequency Range: 2412.00000000 - 2462.00000000
Company: Airespace
Country: United States

Documents & Files

Select a file to view

Users Manual

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

Operational Description

RF Exposure Info

Test Report

Test Setup Photos

Contact Information

Applicant

Bob Friday(Sr. Scientist)

[email protected]408-941-0500Fax: 408-941-0495

Technical Contact

ConsultantDavid Waitt

[email protected]408-832-7053

202 Calvert Dr #217 · Cupertino, California · United States

Non-Technical Contact

ConsultantDavid Waitt

[email protected]408-832-7053

Test Firm

Elliott Laboratories LLCDavid Bare

[email protected]408-245-7800Fax: 408-245-3499

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.41 GHz - 2.46 GHz	79.00 mW

Confidentiality

Long Term

Grant Notes

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Installation of external 5 GHz antennas that are not professionally installed or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.