QVE4XIPRRemote Control

Remote User Guide Safety Instructions You must keep safety in mind while using this device. Keep these and any other instructions for future reference. Observe Warnings: Carefully follow all warnings on the device and in the operating instructions. Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat. Care and Use Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning. When Not in Use: Remove the batteries if this device is to be left unattended or unused for a long period of time. Refer servicing to qualified personnel when a solid object or liquid has fallen onto or into the device. Do NOT attempt to service this device. Refer all servicing to qualified personnel. Opening covers other than the battery cover will void the warranty. Publishing Information Copyright © 2011. EchoStar Technologies L.L.C., Englewood, Colorado 80112. All rights reserved. The information in this User Guide may change without notice. Revisions may be issued to tell you about such changes. Send comments or questions about this User Guide to [email protected] or Technical Publications, EchoStar Technologies L.L.C, 90 Inverness Drive Circle East, Englewood, Colorado 80112. Document Number: 188891 Printed in DISH Network is a registered trademark of DISH Network L.L.C. All product names, trade names, or corporate names mentioned in this User Guide are acknowledged to be the proprietary property of the registered owners. 1 Configuring the 40.0 Remote 1 2 3 4 Confirm your remote has the green number 1 key installed. Pull the remote battery cover off. If your remote has a blank, black key, continue to Insert the Batteries on page 2. Separate the key from the remote by inserting your thumbnail or a coin in the crease. Remove the key by grasping at the bottom. Insert the key face up and slide into place. 5 Note: If you are using the green TV1 key that comes installed in your remote, skip these steps. Go to Insert the Batteries (page 2). 2 Insert the Batteries Pull the remote battery cover off. Insert 4 AAA batteries, making sure to match the plus (+) ends with the plus markings on the battery case. Replace the remote battery cover. 1 2 3 3 Using System Wizard Use System Wizard initially to set up the remote to work with the receiver. System Wizard can also store/restore the settings for your XiP system in both your remote control’s memory and on the receiver. This feature is helpful if you ever need to program a replacement remote or a new system. Note: If your batteries are low, replace them before beginning. Press and hold 0 until System Wizard message appears. Make sure the remote and receiver are in line of sight. Or, Press MENU, select Remote Control, and then select System Wizard. If first time in System Wizard, follow instructions provided. Follow the on-screen options to Backup or Restore setting for your XiP system and remote control settings. Select Continue to return to your paid programming. 1 2 3 4 OR 4 Linking Remote to Receiver Verify the antenna is installed on the back of the receiver. Turn your receiver and TV on, and press SYSTEM INFO on the front panel of the receiver. Confirm that you see the System Info screen. Press and release SAT on your remote. Wait until you hear a tone and see the remote listed on the screen. Confirm that your remote operates your receiver by pressing remote buttons. If this is not working, go back to step 4. 3 2 1 4 5 Use these instructions to link the remote to the receiver if your receiver does not support System Wizard. R E M O T E A N T E N NA SYSTEM INFO 5 SAT Mode To use the features described in this section, make sure you are in SAT mode by pressing the SAT Mode button. Note: Some features may not be available depending on your receiver model. SAT Power & TV Power Top button turns the receiver on/off Bottom button turns the TV on/off Volume and Mute Buttons Control TV volume Programming required Recall Return to last TV channel viewed Picture-In- Picture (PIP) Buttons Watch two separate programs at same time (in Single Mode) Number Buttons Enter a channel number or navigate through menus Menu Access receiver features and settings Pair/Input Press once for Input. Press and hold for Pair Themes Search for programs using Themes Info Retrieve info on programs Search Search for a program Shortcut Keys Access frequently used features Digital Video Recorder (DVR) Buttons Pause live TV and play or record programming Format Format the picture to the desired width to match the program you are viewing System Wizard Press and hold to fix remote control issues and sync data Arrow/Select Buttons Channel up/down, navigate through menus, and select a desired option View Satellite Programming Exit out of any menu/guide and return to viewing live TV Cancel Return to previous menu or to watch a program Browse See what is on other channels while watching TV Program Guide Display current and future satellite program listings Page Buttons Page up/down in menus Press this button for SAT Mode Dish OnDemand Explore interactive TV features 6 TV Mode TV To use the features described in this section, make sure you are in TV mode by pressing the TV Mode button. Remote programming is required. Note: Some features may not be available depending on your receiver model. Note: Remote operation is different on DISH Network TVs. See your DISH Network TV User’s Guide for proper operation. Power & TV Power Top button turns the TV on/off Bottom button turns the TV on/off Press this button for TV Mode Mute Turn TV volume on or off Recall Return to last TV channel viewed Picture-In-Picture (PIP) Buttons Watch two separate programs at same time (in Single Mode) Number Buttons Enter a channel number or navigate through menus TV Menu Access menu features available on some TVs Pair/Input Switch between TV inputs (available only for certain makes and models of TVs) Up/Down Arrow Button Chan…

Text truncated - open the document above for the full version.

8/29/2011 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification FCC ID: QVE4XIPR Authority to Act as Agent On our behalf, I appoint Alan Laudani of Nemko USA Inc., 11696 Sorrento Valley Rd, San Diego, CA, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Federal Communication Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with SMK USA, 1055 Tierra Del Rey, Suite H, Chula Vista, CA 91910, USA. Agency agreement expiration date: October 1, 2011

8/29/2011 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification FCC ID: QVE4XIPR Authority to Act as Agent On our behalf, I appoint Leo Gateno of SMK USA, 1055 Tierra Del Rey, Suite H, Chula Vista, CA 91910, USA to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Federal Communication Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with SMK USA, 1055 Tierra Del Rey, Suite H, Chula Vista, CA 91910, USA. Agency agreement expiration date: October 1, 2011

8/02/11 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: QVE4XIPR Product Name: FSK Module Remote Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  BOM  Operation Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 1 th Day of August, 2011 RF Engineer

DETAIL UNDER MINI CIRCUIT BOTH SIDES OF MINI CIRCUIT BACKSIDE MAIN BOARD FRONTSIDE MAIN BOARD

Nemko USA, Inc. 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Phone (858) 755-5525 Fax (858) 452-1810 FCC Part 15 Subpart C, 15.249 : 03 August 2011 CERTIFICATION TEST REPORT Report Number: 2011 0710211696 FCC Project Number: 10211696 Nex Number: 180182 Applicant: SMK MANUFACTURING 12264 EL CAMINO REAL, STE. 203 San Diego, CA 92130 Equipment Under Test (EUT): REMOTE Model: 186217 FCC ID: QVE4XIPR In Accordance With: FCC Part 15 Subpart C, 15.249 Tested By: Nemko USA Inc. 11696 Sorrento Valley Road, Suite F San Diego, CA 92121 Authorized By: Alan Laudani, EMC/RF Test Engineer Date: J ULY 29, 2011 Total Number of Pages: 18 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: QVE4XIPR Report Number: 2011 0710211696 FCC Specification: FCC Part 15 Subpart C, 15.249 Page 2 of 18 Section1: Summary of Test Results General All measurements are traceable to national standards These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 15; Subpart C and IC RSS-210. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC and IC. The assessment summary is as follows: Apparatus Assessed: Remote Model: 186217 Specification: FCC Part 15 Subpart C, 15.249 Date Received in Laboratory: July 27, 2011 Compliance Status: Complies Exclusions: None Non-compliances: None Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: QVE4XIPR Report Number: 2011 0710211696 FCC Specification: FCC Part 15 Subpart C, 15.249 Page 3 of 18 1.1 Report Release History REVISION DATE COMMENTS - July 29, 2011 Prepared By: Alan Laudani - July 29, 2011 Initial Release: Alan Laudani Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. TESTED BY: _ Date: July 29, 2011 Alan, EMC Test Engineer Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: QVE4XIPR Report Number: 2011 0710211696 FCC Specification: FCC Part 15 Subpart C, 15.249 Page 4 of 18 TABLE OF CONTENTS Section1: Summary of Test Results ................................................................................ 2 1.1 Report Release History ..................................................................................... 3 Section 2: Equipment Under Test ................................................................................... 5 2.1 Product Identification ........................................................................................ 5 2.2 Samples Submitted for Assessment ................................................................. 5 2.3 Theory of Operation .......................................................................................... 6 2.4 Technical Specifications of the EUT ................................................................. 6 Section 3: Test Conditions .............................................................................................. 7 3.1 Specifications .................................................................................................... 7 3.2 Deviations From Laboratory Test Procedures ................................................... 7 3.3 Test Environment .............................................................................................. 7 3.4 Test Equipment ................................................................................................. 8 Section 4: Observations .................................................................................................. 9 4.1 Modifications Performed During Assessment ................................................... 9 4.2 Record Of Technical Judgements ..................................................................... 9 4.3 EUT Parameters Affecting Compliance ............................................................ 9 4.4 Test Deleted ...................................................................................................... 9 4.5 Additional Observations .................................................................................... 9 Section 5: Results Summary ......................................................................................... 10 5.1 Test Results .................................................................................................... 10 Appendix A: Test Results .............................................................................................. 11 Section 15.215(c) – Occupied Bandwidth ..................................................................... 11 Section 15.249(a) – Field Strength of Emissions .......................................................... 14 Duty Cycle Correction Factor Calculations .................................................................... 15 Section 15.249 (d) – Spurious Emissions Outside of the band ..................................... 17 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: QVE4XIPR Report Number: 2011 0710211696 FCC Specification: FCC Part 15 Subpart C, 15.249 Page 5 …

Text truncated - open the document above for the full version.