QZ9-TSR2TSR (Touch Screen Remote controller)

Touch Screen Remote 277 The Touch Screen Remote (TSR) provides on-screen function buttons to enable rear passengers to operate various vehicle features: •Media source. (see ‘Media’, page 279) •Rear climate settings. (see ‘Climate’, page 279) •Rear seat heating, ventilation and massage settings. (see ‘Seats’, page 280) •Rear blind control. (see ‘Blinds’, page 281) •Mood lighting settings. (see ‘Lighting’, page 281) •Satellite navigation. (see ‘Navigation’, page 282) •Flying B control. (see ‘Flying B’, page 282) •Vehicle information. (see ‘Car’, page 282) •Audio system settings. (see ‘Sound’, page 283) Releasing the Touch Screen Remote from the charging cradle Caution Do not force the TSR from the cradle. Important If the cradle is obstructed when ejecting the TSR will return to the home position Note When the ignition is switched on and the TSR is in the cradle, the TSR battery will automatically be charged. It is recommended that the TSR is placed in the cradle when not in use. The ignition must be switched on in order to eject the TSR. The TSR is fully locked from use and cannot be ejected when the child lock is active (see ‘Smart remote child lock settings’, page 274). If the TSR is not removed from the cradle when it is ejected, the cradle will retract after 6 seconds and lock the TSR back in place. To release the Touch Screen Remote (TSR) from the charging cradle: •Press on the TSR screen. The TSR will eject from its cradle, allowing it to be removed. To replace the TSR, place it back into the cradle. Magnetic force will pull the TSR into the cradle. 278 Touch Screen Remote Touch Screen Remote features Home screen Note Some functions of the Touch Screen Remote will not operate if WiFi is deactivated on the Infotainment system. Fig. 104Touch Screen Remote home screen The Touch Screen Remote (TSR) home screen displays icons across two pages to allow quick access to all TSR features. To access the second page of features, swipe your finger across the screen from the right hand side to the left. The home screen can be configured to display ‘widgets’ to allow quick access and basic functionality of the TSR features. To access the widgets home screen, press . To add a widget to the home screen: •Press on the widget to be modified. •Select the preferred widget to be displayed on the home screen. •Select Save. Media The Touch Screen Remote can be used to control the media system. To access the media function, press the following icons: Within the media tab, the following options are available: PLAY displays the media which is currently playing. FAV displays saved radio stations on your favourites list. LIST displays the options for the current media source (available radio stations, tracks etc.) SOURCE to select the media source (see ‘Select a media source’, page 237). Climate The Touch Screen Remote (TSR) can be used to adjust the climate control settings for the rear compartment. Occupants of the front seats can make similar adjustments using the front compartment controls (see ‘Access the rear air settings’, page 255). To adjust the rear climate settings press the following icons: 279 Touch Screen Remote The following controls are available from this page: •AC max (when fitted) - Reduces the air temperature and increases the air output to maximum, cooling the vehicle interior as quickly as possible. Press the button again to switch the function off and return to the previously used settings. •Ioniser (when fitted) - Activate the feature to help achieve better air quality within the vehicle. •Climate system off – Switches the rear climate control system off. •Temperature settings – Increase or decrease the temperature in 0.5° increments. Pressing any of the functions on the left or right of the display will take you to the climate settings screen to adjust the climate settings in relation to that side. The climate settings screens can also be accessed by swiping left or right under the taskbar. 123 645 Fig. 105TSR rear climate settings 1.Fan speed – Increase or decrease the fan speed. 2.Air distribution – Press to alter the air flow direction. 3.Air temperature – Increase or decrease the air temperature. 4.BACK – Return to the rear climate control main page. 5.AUTO - Regulates the air temperature, flow and distribution automatically, so the specified temperature is attained and maintained. 6.SYNC – Synchronises the climate settings of the opposing rear seat to the settings displayed. Seats To adjust the rear seat settings press the following icons: 280 Touch Screen Remote The following controls are available from this page: •Seat heating control – Select the seat heating intensity (between 1-3) and seat heating distribution (back only/ base only/both). •Seat ventilation control (when fitted) - Select the seat ventilation level (between 1-3) and seat ventilation distribution (back only/base only/both). •Massage control (when fitted) – Select the massage type and intensity. •Auto mode – The seat temperature follows the rear climate settings. VIP seat control To activate this feature, press the following icon: When enabled, VIP seat control allows you to adjust the front passenger seat using the rear seat controls. Blinds To activate this feature, press the following icons: The following controls are available from this page: •OPEN ALL blinds. •CLOSE ALL blinds. •Rear blind up/down – Select to raise or lower the rear blind. •Rear left blind up/down – Select to raise or lower the rear left blind. •Rear right blind up/down – Select to raise or lower the rear right blind. •Front roof blind open/close (when fitted) – Select to open or close the front sunroof blind. •Rear roof blind open/close (when fitted) – Select to open or close the rear sunroof blind. Lighting Depending on specification, the Touch Screen Remote (TSR) can be used to change various interior lighting settings. To adjust the interior lighting settings press the following icons: On vehicles with the standard lighting pack the foll…

Text truncated - open the document above for the full version.

FB: CM / Stand 13.01.2017 / Rev.: 02 1 User Manual - FCC & ISED related statements Approval and declaration of conformity This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. FCC ID: QZ9-TSR2 IC: 5927A-TSR2 NOTICE: Changes or modifications made to this equipment not expressly approved by Bury Sp. z o.o. may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help

Annex A 1-6730/18-01-01_AnnexA External photos of the Equipment Under Test This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: David Lang Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1: EUT front view Photo 2: EUT rear view 1-6730/18-01-01_AnnexA2/5 Photo 3: EUT side view Photo 4: EUT side view 1-6730/18-01-01_AnnexA3/5 Photo 5: EUT side view Photo 6: EUT side view 1-6730/18-01-01_AnnexA4/5 Document history VersionApplied changesDate of release initial release2018-11-26 1-6730/18-01-01_AnnexA5/5

Annex B 1-6730/18-01-01_AnnexB Internal photos of the Equipment Under Test This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: David Lang Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos PCB of the EUT (front view) PCB of the EUT (rear view) 1-6730/18-01-01_AnnexB2/7 PCB of the EUT (detailed front view) EUT screen (rear view) 1-6730/18-01-01_AnnexB3/7 EUT screen serial number EUT screen microcontroller 1-6730/18-01-01_AnnexB4/7 EUT screen microcontroller serial number EUT battery pack 1-6730/18-01-01_AnnexB5/7 EUT back plate EUT frame 1-6730/18-01-01_AnnexB6/7 Document history VersionApplied changesDate of release initial release2018-12-06 1-6730/18-01-01_AnnexB7/7

Page 1 of 52 Annex D Appendix to Test Report No.: 1-6730/18-01-58 Testing Laboratory CTC advanced GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Appendix with Calibration data, Phantom certificate and system check information 2012-01-16 Test report no.: 1-6730/18-01-58 Page 2 of 52 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 Calibration report “Probe EX3DV4” ........................................................................................................ 3 3 Calibration report “2600 MHz System validation dipole” .................................................................... 13 4 Calibration report “5GHz System check dipole”.................................................................................. 25 5 Calibration certificate of Data Acquisition Unit (DAE) ........................................................................ 44 6 Certificate of “SAM Twin Phantom V4.0/V4.0C’’ ................................................................................. 45 7 Application Note System Performance Check ..................................................................................... 46 7.1 Purpose of system performance check ..................................................................................... 46 7.2 System Performance check procedure ...................................................................................... 46 7.3 Uncertainty Budget ...................................................................................................................... 47 7.4 Power set-up for validation ......................................................................................................... 51 7.5 Laboratory reflection ................................................................................................................... 52 7.6 Additional system checks ........................................................................................................... 52 Test report no.: 1-6730/18-01-58 Page 3 of 52 2 Calibration report “Probe EX3DV4” Test report no.: 1-6730/18-01-58 Page 4 of 52 Test report no.: 1-6730/18-01-58 Page 5 of 52 Test report no.: 1-6730/18-01-58 Page 6 of 52 Test report no.: 1-6730/18-01-58 Page 7 of 52 Test report no.: 1-6730/18-01-58 Page 8 of 52 Test report no.: 1-6730/18-01-58 Page 9 of 52 Test report no.: 1-6730/18-01-58 Page 10 of 52 Test report no.: 1-6730/18-01-58 Page 11 of 52 Test report no.: 1-6730/18-01-58 Page 12 of 52 Test report no.: 1-6730/18-01-58 Page 13 of 52 3 Calibration report “2600 MHz System validation dipole” Test report no.: 1-6730/18-01-58 Page 14 of 52 Test report no.: 1-6730/18-01-58 Page 15 of 52 Test report no.: 1-6730/18-01-58 Page 16 of 52 Test report no.: 1-6730/18-01-58 Page 17 of 52 Test report no.: 1-6730/18-01-58 Page 18 of 52 Test report no.: 1-6730/18-01-58 Page 19 of 52 Test report no.: 1-6730/18-01-58 Page 20 of 52 Test report no.: 1-6730/18-01-58 Page 21 of 52 Antenna Parameters with Head TSL From cal. data Measured 2018-07-19 Impedance; transformed to feed point 49.2Ω - 6.2jΩ 49.1Ω - 5.5jΩ Return Loss -24.1 dB -25.0dB Test report no.: 1-6730/18-01-58 Page 22 of 52 Antenna Parameters with Body TSL From cal. data Measured 2018-07-19 Impedance; transformed to feed point 44.9Ω - 6.3jΩ 44.6Ω - 6.7jΩ Return Loss -21.4 dB -20.9dB Test report no.: 1-6730/18-01-58 Page 23 of 52 Antenna Parameters with Head TSL From cal. data Measured 2019-09-16 Impedance; transformed to feed point 49.2 Ω - 6.2 jΩ 49.1 Ω - 5.5 jΩ Return Loss -24.1 dB -25.0 dB Test report no.: 1-6730/18-01-58 Page 24 of 52 Antenna Parameters with Body TSL From cal. data Measured 2019-09-16 Impedance; transformed to feed point 44.9 Ω - 6.3 jΩ 44.6 Ω - 6.6 jΩ Return Loss -21.4 dB -20.1 dB Test report no.: 1-6730/18-01-58 Page 25 of 52 4 Calibration report “5GHz System check dipole” Test report no.: 1-6730/18-01-58 Page 26 of 52 Test report no.: 1-6730/18-01-58 Page 27 of 52 Test report no.: 1-6730/18-01-58 Page 28 of 52 Test report no.: 1-6730/18-01-58 Page 29 of 52 Test report no.: 1-6730/18-01-58 Page 30 of 52 Test report no.: 1-6730/18-01-58 Page 31 of 52 Test report no.: 1-6730/18-01-58 Page 32 of 52 Test report no.: 1-6730/18-01-58 Page 33 of 52 Test report no.: 1-6730/18-01-58 Page 34 of 52 Test report no.: 1-6730/18-01-58 Page 35 of 52 Test report no.: 1-6730/18-01-58 Page 36 of 52 Test report no.: 1-6730/18-01-58 Page 37 of 52 Test report no.: 1-6730/18-01-58 Page 38 of 52 Antenna Parameters with Head TSL at 5200 MHz From cal. data Measured 2019-09-16 Impedance; transformed to feed point 49.6 Ω - 9.8 jΩ 49.3 Ω - 7.0 jΩ Return Loss -20.2 dB -23.0 dB Test report no.: 1-6730/18-01-58 Page 39 of 52 Antenna Parameters with Head TSL at 5500 MHz From cal. data Measured 2019-09-16 Impedance; transformed to feed point 49.6 Ω - 5.4 jΩ 49.1 Ω - 5.2 jΩ Return Loss -25.3 dB -25.5 dB Test report no.: 1-6730/18-01-58 Page 40 of 52 Antenna Parameters with Head TSL at 5800 MHz From cal. data Measured 2019-09-16 Impedance; transformed to feed point 55.5 Ω - 2.5 jΩ 53.7 Ω - 4.8 jΩ Return Loss -24.9 dB -24.6 dB Test report no.: 1-6730/18-01-58 Page 41 of 52 Antenna Parameters with Body TSL at 5200 MHz From cal. data Measured 2019-09-16 Impedance; transformed to feed point 49.6 Ω - 7.9 jΩ 49.6 Ω - 8.2 jΩ Return Loss -22.1 dB 21.7 dB Test report no.: 1-6730/18-01-58 Page 42 of 52 Antenna Parameters with Body TSL at 5500 MHz From cal. data …

Text truncated - open the document above for the full version.

© CTC advanced GmbH Page 1 of 50 BNetzA - CAB - 02/21 - 102 D - P L - 1 2 0 7 6 - 0 1 - 0 3 TEST REPORT Test Report No.: 1-6730/18-01-58 Testing Laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-03 Bury GmbH & Co. KG Robert-Koch-Str. 1-7 32584 Löhne/GERMANY Phone: +49 5732 9706-100 Contact: Johann Dshus e-mail: [email protected] Phone: +49 (0) 5 73 29 70 62 77 Manufacturer Bury GmbH & Co. KG Robert-Koch-Str. 1-7 32584 Löhne/GERMANY Test Standards IEEE 1528-2013 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques RSS-102 Issue 5 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Touchscreen remote wireless control unit Device type: portable device Model name: TSR2 S/N serial number: Sample R3 (MAC: 30:45:11:1A:5C:DA) FCC-ID: QZ9-TSR2 ISED Number: 5927A-TSR2 Product Marketing Name (PMN): Touch Screen remote Hardware Version Identification No. (HVIN): TSR2 Hardware status: H09 Software status: X087 Frequency: see technical details Antenna: integrated antenna Battery option: integrated battery Test sample status: identical prototype Exposure category: general population / uncontrolled environment This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test Report authorised: Test performed: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-6730/18-01-58 © CTC advanced GmbH Page 2 of 50 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information .................................................................................................................................. 4 2.1 Notes and disclaimer ..................................................................................................................... 4 2.2 Application details ......................................................................................................................... 4 2.3 Statement of compliance ............................................................................................................... 4 2.4 Technical details ............................................................................................................................ 5 2.5 Transmitter and Antenna Operating Configurations .................................................................. 5 3 Test standards/ procedures references .................................................................................................. 6 3.1 RF exposure limits ......................................................................................................................... 7 4 Summary of Measurement Results ......................................................................................................... 8 5 Test Environment ...................................................................................................................................... 8 6 Test Set-up ................................................................................................................................................. 9 6.1 Measurement system ..................................................................................................................... 9 6.1.1 System Description ................................................................................................................ 9 6.1.2 Test environment ................................................................................................................. 10 6.1.3 Probe description ................................................................................................................. 10 6.1.4 Phantom description ............................................................................................................ 11 6.1.5 Device holder description .................................................................................................... 12 6.1.6 Scanning procedure ............................................................................................................ 13 6.1.7 Spatial Peak SAR Evaluation .............................................................................................. 14 6.1.8 Data Storage and Evaluation............................................................................................... 15 6.1.9 Tissue simulating liquids: dielectric properties .................................................................... 17 6.1.10 Tissue simulating liquids: parameters ................................................................................. 17 6.1.11 Measurement uncertainty evaluation for SAR test .............................................................. 18 6.1.12 Measurement uncertainty evaluation for System Check ..................................................... 26 6.1.13 System check ...................................................................................................................... 28 6.1.14 System check procedure ...........................…

Text truncated - open the document above for the full version.

BNetzA - CAB - 02/21 - 102 D-PL-12076-01-03 TEST REPORT Test report no.: 1-6730/18-01-17-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-03 Bury GmbH & Co. KG Robert-Koch-Str. 1-7 32584 Löhne / GERMANY Phone: +49 5732 9706-100 Contact: Johann Dshus e-mail: [email protected] Manufacturer BURY Sp. z o.o. ul. Wojska Polskiego 4 39-300 Mielec, POLAND Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Touchscreen remote wireless control unit Model name: TSR2 FCC ID: QZ9-TSR2 IC: 5927A-TSR2 Frequency: U-NII bands: U-NII-1; U-NII-2A & 2C; U-NII-3 Technology tested: WLAN (DFS only) Antenna: Integrated antenna Power supply: 8.25 V DC by Li-ion battery Temperature range: -40°C to +85°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: p.o. René Oelmann David Lang Lab Manager Lab Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-6730/18-01-17-A © CTC advanced GmbH Page 2 of 21 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer ......................................................................................................................... 3 2.2 Application details ............................................................................................................................. 3 2.3 Test laboratories sub-contracted ..................................................................................................... 3 3 Test standard/s and references .................................................................................................................... 4 4 Test environment ............................................................................................................................................ 5 5 Test item .......................................................................................................................................................... 5 5.1 General description ........................................................................................................................... 5 5.2 Additional information ...................................................................................................................... 5 6 Measurement uncertainty .............................................................................................................................. 6 7 Summary of measurement results ............................................................................................................... 6 8 Additional comments ..................................................................................................................................... 7 9 RF measurements .......................................................................................................................................... 8 9.1 Description of test setup ................................................................................................................... 8 9.1.1 Conducted measurements ................................................................................................................... 8 9.2 Parameters of DFS test signals ........................................................................................................ 9 9.2.1 DFS Detection Thresholds for Master Devices as well as Client Devices With Radar Detection ....... 9 9.2.2 DFS Response Requirement Values ................................................................................................... 9 9.2.3 Radar Test Waveforms ...................................................................................................................... 10 9.3 Test preparation ............................................................................................................................... 13 9.3.1 Channel loading ................................................................................................................................. 13 9.3.2 Radar burst timing signal ................................................................................................................... 14 9.4 Test results (prior to use of a channel) ......................................................................................... 15 9.5 Test results (during normal operation) ......................................................................................... 15 9.5.1 Channel move time / channel closing transmission time ................................................................... 15 9.5.2 Non-Occupancy Period ...................................................................................................................... 17 10 Test equipment and anc…

Text truncated - open the document above for the full version.

Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 101 of 207 Plot 9: U-NII-3; middle channel Plot 10: U-NII-3; highest channel Date: 8.NOV.2018 13:41:20 Date: 8.NOV.2018 13:25:55 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 102 of 207 Plots: n/ac HT40 – mode Plot 1: U-NII-1; lowest channel Plot 2: U-NII-1; highest channel Date: 12.NOV.2018 15:23:43 Date: 12.NOV.2018 15:36:23 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 103 of 207 Plot 3: U-NII-2A; lowest channel Plot 4: U-NII-2A; highest channel Date: 12.NOV.2018 15:52:50 Date: 12.NOV.2018 15:59:50 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 104 of 207 Plot 5: U-NII-2C; lowest channel Plot 6: U-NII-2C; middle channel Date: 12.NOV.2018 16:06:50 Date: 12.NOV.2018 16:13:26 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 105 of 207 Plot 7: U-NII-2C; highest channel Plot 8: U-NII-3; lowest channel Date: 12.NOV.2018 16:20:26 Date: 12.NOV.2018 16:26:56 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 106 of 207 Plot 9: U-NII-3; highest channel Date: 12.NOV.2018 15:45:48 Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 107 of 207 11.8 Occupied bandwidth / 99% emission bandwidth Description: Measurement of the 99% bandwidth of the modulated signal acc. RSS-GEN. Measurement: Measurement parameter Detector: Peak Sweep time: Auto Resolution bandwidth: 300 kHz / 500 kHz Video bandwidth: 1 MHz / 3 MHz Span: 50 MHz / 100 MHz Measurement procedure: Measurement of the 99% bandwidth using the integration function of the analyzer Trace mode: Max hold (allow trace to stabilize) Test setup: See sub clause 6.4 - A Measurement uncertainty: See sub clause 8 Usage: -/- IC OBW is necessary for Emission Designator Test report no.: 1-6730/18-01-09-A © CTC advanced GmbH Page 108 of 207 Results: a 99% bandwidth (kHz) U-NII-1 (5150 MHz to 5250 MHz) Lowest channel Middle cha…

Text truncated - open the document above for the full version.