R8KUGQUBE1USUSB Dongle

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Consult the dealer or an experienced radio/TV technician for help Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Where shielded interface cables have been provided with the product or specified addi tional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1 Turn the Computer ON 2 Plug JUNO-USB into USB Port on the computer 3 Verify computer recognizes JUNO-USB 4 Add WirelessUSBKeyboard/ Mouse JUNO-USB User Manual Re-Tek-1381/2.0

Solutions for a Real Time World 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Customer Comment Line: (800) 826.0808 Copyright Unigen Corporation, 2004 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, Maryland 21046 September 19, 2005 FCC ID: R8KUGQUBE1US Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. The accompanying Form 731 is being filed with the commission on our behalf by M. FLOM ASSOCIATES, INC., a consulting and testing laboratory. Included as exhibits with the enclosed application are block diagrams, schematics, and a detailed description of the theory of operation of the device. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. It is not our intention, however, to make our proprietary process a matter of public record. In view of the fact that the schematics, disclose the mechanism of our process, we ask that these portions (schematics) of our application be withheld from public inspection as provided under FCC section 0.459. We request therefore that these documents and this letter be segregated from the body of our evaluation report and withheld from public inspection. Thank you for your attention. Please let the undersigned know if the Commission disagrees with our position or requires further justification. Sincerely, Mark Morrissey Director of Business Development Unigen Corporation

FCC ID:R8KUGQUBE1US IC: 5125A-UGQUBE1US NMB-003 B ICES-003 B

M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 Transmitter Certification of Model: USB Dongle FCC ID: R8KUGQUBE1US to Federal Communications Commission Rule Part(s) 15.247 Date Of Report: September 12, 2005 On the Behalf of the Applicant: Unigen Corporation At the Request of: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Attention of: Mark Morrissey, Director of Business Development (800) 826-0808; (510) 668-2088 ext 2087 Email: [email protected] Supervised By: David E. Lee, Quality Assurance Manager M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 List Of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: Unigen Corporation FCC ID: R8KUGQUBE1US By Applicant: 1. Letter Of Authorization 2. Identification Drawings Label Location of Label Compliance Statement Location of Compliance Statement 3. Documentation: 2.1033(B) (3) User Manual (4) Operational Description (5) Block Diagram (5) Schematic Diagram (7) Photographs Block Diagram Parts List Active Devices 4. Draft Specification Information By M.F.A. Inc. A. Testimonial & Statement of Certification M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 The applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 Table Of Contents Rule Description Page . Test Report 1 2.1033(c) General Information Required 2 . Standard Test Conditions and Engineering Practices 5 2.1046(a) EIRP Carrier Power (Radiated) 6 2.1053(a) Field Strength of Spurious Radiation 7 2.1049(c)(1) Emission Masks (Occupied Bandwidth) 11 15.207 A/C Powerline Conducted Emissions 21 2.202(g) Necessary Bandwidth and Emission Bandwidth 24 M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Page 1 of 27 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) Test Report b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d0590044 d) Client: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 e) Identification: USB Dongle FCC ID: R8KUGQUBE1US Description: 2.4GHz TX/RX f) EUT Condition: Not required unless specified in individual tests. g) Report Date: September 12, 2005 EUT Received: September 2, 2005 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: David E. Lee, Quality Assurance Manager n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Page 2 of 27 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 List Of General Information Required For Certification In Accordance with FCC Rules and Regulations, Volume II, Part 2 and to 15.247 Sub-Part 2.1033 (c)(1): Name and Address of Applicant: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Manufacturer: Applicant (c)(2): FCC ID: R8KUGQUBE1US Model Number: USB Dongle (c)(3): Instruction Manual(s): Please See Attached Exhibits (c)(4): Type of Emission: GFSK (c)(5): FREQUENCY RANGE, MHz: 2402.00 to 2479.00 (c)(6): Power Rating: 1 mW (0 dBm) Switchable X Variable N/A (c)(7): Maximum Power Rating, W: [15.247(b)(3)] 1W 15.203: Antenna Requirement: X The antenna is permanently attached to the EUT The antenna uses a unique coupling The EUT must be professionally installed The antenna requirement does not apply M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Page 3 of 27 Chandler, Arizona 85225-7176 (480) 926-3100 phone, fax (480) 926-3598 MFA p0590001, d0590044 Subpart 2.1033 (continued) (c)(8): Voltages & Currents in All Elements in Fi…

Text truncated - open the document above for the full version.