R8KUGWM1USHN33AWIRELESS USB

WirelessUSB™ - UGWM1US Solutions for a Real Time WorldUser Manual UM-UGWM1US145388 Warm Springs Blvd. Fremont, CA 94539 [email protected]: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.comToll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 UNIGEN CORP. WIRELESS MODULE PRODUCTS PART NUMBER FAMILY: UGWM1US S ERIES JUNO-M WIRELESSUSB™ RADIO MODULE USER MANUAL FCC ID: R8KUGWM1USHN33A Issue Date: 25 October 2004 Revision: 0.91 Revision History Rev. No.HistoryIssue DateRemarks 0.9Draft Release2 Oct. 2004Pending FCC Grant # 0.912 nd Draft25 Oct. 2004Inclusion of FCC Grant THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. Unigen Corporation disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppel or otherwise, to any intellectual property rights is granted herein. *Third-party brands, names, and trademarks are the property of their respective owners. Copyright © Unigen Corporation, 2004 WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UM-UGWM1US245388 Warm Springs Blvd. Fremont, CA 94539 [email protected]: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.comToll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 UNIGEN CORP. WIRELESS MODULE PRODUCTS1 PART NUMBER FAMILY: UGWM1US SERIES1 JUNO-M WIRELESSUSB™ RADIO MODULE1 USER MANUAL1 FCC ID: R8KUGWM1USHN33A1 Revision History1 ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL4 User Guide Information5 United States of America Requirements5 General User Guide Requirements5 Topics Not Covered6 UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA)7 Design Criteria for Modular Approval7 General Conditions7 Antennae7 Emissions Compliance Testing7 Co-location of Additional Transmitters8 Product Labeling Requirements8 INDUSTRY CANADIAN REGULATORY APPROVAL9 Design Criteria for Modular Approval9 General Conditions9 Antennae9 Emissions Compliance Testing9 Product Labeling Requirements10 EUROPEAN UNION REGULATORY APPROVAL11 Design Criteria for Modular Approval11 General Conditions11 Antennae11 Emissions Compliance Testing12 WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UM-UGWM1US345388 Warm Springs Blvd. Fremont, CA 94539 [email protected]: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.comToll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 Exterior Labeling Requirements13 UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION)14 CONTACT INFORMATION14 APPENDIX A:15 Agency Certifications:15 Regulatory Compliance Statement:15 EUROPEAN UNION “DECLARATION OF CONFORMITY”16 MECHANICAL CHARACTERISTICS:16 APPENDIX B:17 FCC Grant# - R8KUGWM1USHN33A17 WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UM-UGWM1US445388 Warm Springs Blvd. Fremont, CA 94539 [email protected]: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.comToll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWM1US WirelessUSB™ module (the “UGWM1US”) marketed under the name JUNO-M, is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4-GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate UGWM1US throughout the world. For purposes of ease of integration, time to market, and product surety, Unigen submitted UGWM1US to relevant agencies and obtained regulatory approvals for specific countries. UGWM1US was approved under the “Modular Approval (MA) Grant”. This certification represents a significant cost savings to the OEM. The radio certification portion of this grant is transferable to Digital Electronic Device manufacturers given adherence to specific implementation criteria noted herein. Any modification of the UGWM1US will void the manufacturer’s warranty. Any alteration or deviation from the documented installation and/or use of the UGWM1US will void the MA Grant as it applies to the end-product. In the event the Digital Electronic Device manufacturer alters the herein described and approved installation of the UGWM1US, the end-product may require a complete battery of regulatory agency certification test Digital Electronic Device manufacturer may be required to submit to a complete battery of tests, depending on the requirements noted in the region they wish to sell their product. The MA Grant provides that Digital Electronic Device manufacturers who incorporate UGWM1US as tested and approved, and can be relieved from having to perform the Radio Regulatory certification portion of the respective agency certification. The MA Grant is valid only in countries that recognize the MA Grant certification process. Countries currently accepting the MA Grant include; the USA, Canada, and many European countries as noted in the General User Guide Requirements Section of this document. Terms and conditions of regulatory approval for these countries are also described herein. However, this “grandfathered” radio certification does not relieve the Digital Electronic Device manufacturers from submitting their device for digital emissions certifications. Electronic device manufacturers may disregard the requirements of this section provided they accept full responsibility for regulatory type-approval of the electronic device with an integrated UGWM1US wireless module. WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UM-UGWM1US545388 Warm Springs Blvd. Fremont, CA 94539 [email protected]: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.comToll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 User Guide Information Electronic device manufactur…

Text truncated - open the document above for the full version.

Solutions for a Real Time World 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Customer Comment Line: (800) 826.0808 Copyright Unigen Corporation, 2004 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, Maryland 21046 September 1, 2004 FCC ID: R8KUGWM1USHN33A Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. The accompanying Form 731 is being filed with the commission on our behalf by M. FLOM ASSOCIATES, INC., a consulting and testing laboratory. Included as exhibits with the enclosed application are block diagrams, schematics, and a detailed description of the theory of operation of the device. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. It is not our intention, however, to make our proprietary process a matter of public record. In view of the fact that the schematics, disclose the mechanism of our process, we ask that these portions (schematics) of our application be withheld from public inspection as provided under FCC section 0.459. We request therefore that these documents and this letter be segregated from the body of our evaluation report and withheld from public inspection. Thank you for your attention. Please let the undersigned know if the Commission disagrees with our position or requires further justification. Sincerely, Mark Morrissey Director of Business Development Unigen Corporation

FCC ID: R8KUGWM1USHN33A IC: 5125A-UGWM1US NMB-003 B ICES-003 B

FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Amended Transmitter Certification Report of FCC ID: R8KUGWM1USHN33A Wireless USB to Federal Communications Commission Rule Part(s) 2, 15.247, Confidentiality Date Of Report: November 18, 2004 On the Behalf of the Applicant: Unigen Corporation At the Request of: P.O. 27172 Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Attention of: Mark Morrissey, Director of Business Development (800) 826-0808; (510) 668-2088 ext 2087 Email: [email protected] Supervised By: David E. Lee, Compliance Test Manager FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 The Applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Table Of Contents Rule Description Page . Test Report 1 2.1033(c) General Information Required 2 . Standard Test Conditions and Engineering Practices 6 15.247(b). Maximum Peak Output Power 7 15.247(c). Out of Band Emissions 11 15.205. Restricted Bands Of Operation 13 15.207 A/C Powerline Conducted Emissions 19 FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Page Number 1 of 22. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) Test Report b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d0490046 d) Client: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 e) Identification: FCC ID: R8KUGWM1USHN33A Description: Wireless USB f) EUT Condition: Not required unless specified in individual tests. g) Report Date: September 26, 2004 EUT Received: September 7, 2004 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: David E. Lee, Compliance Test Manager n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Page Number 2 of 22. List Of General Information Required For Certification In Accordance with FCC Rules and Regulations, Volume II, Part 2 and to 15.247, Confidentiality Sub-Part 2.1033 (c)(1): Name and Address of Applicant: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Manufacturer: Applicant (c)(2): FCC ID: R8KUGWM1USHN33A Model Number: UGWM1USHB33 Wireless USB (c)(3): Instruction Manual(s): Please See Attached Exhibits (c)(4): Type of Emission: DSSS (c)(5): FREQUENCY RANGE, MHz: 2402-2479 (c)(6): Power Rating, W: 0.133 Switchable Variable X N/A (c)(7): Maximum Power Rating, W: = 1 Watt peak 15.203: Antenna Requirement: The antenna is permanently attached to the EUT X The antenna uses a unique coupling The EUT must be professionally installed The antenna requirement does not apply FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Page Number 3 of 22. Subpart 2.1033 (continued) (c)(8): Voltages & Currents in All Elements in Final RF Stage, Including Final Transistor or Solid State Device: Collector Current, A = per manual Collector Voltage, Vdc = per manual Supply Voltage, Vdc = 4.5 (c)(9): Tune-Up Procedure: Please See Attached Exhibits (c)(10): Circuit Diagram/Circuit Description: Including description of circuitry & devices provided for determining and stabilizing frequency, for suppression of spurious radiation, for limiting modulation and limiting power. Please See Attached Exhibits (c)(11): Label Information: Please See Attached Exhibits (c)(12): Photographs: Please See Attached Exhibits (c)(13): Digital Modulation Description: ___ Attached Exhibits _x_ N/A (c)(14): Test And Measurement Data: Follows FCC ID: R8KUGWM1USHN33A MFA p0490003, d0490051 Page Number 4 of 22. A2LA “A2LA has accredited M. Flom Associates, Inc. Chandler, AZ for technical competence in the field of Electrical Testing. The accreditation covers the specific tests and types of tests listed on the agreed scope of accreditation. This laboratory meets the requirements of ISO/IEC 17025 – 1999 ‘General Requirements for the Competence of Testing and Calibration Laboratories’ and any additional program requirements in the identified field of testing.” Certificate Number: 2152-01 NIST I am pleased to inform you that your laboratory has been validated by the Chinese Tai…

Text truncated - open the document above for the full version.

FCC ID: R8KUGWM1USHB33 MFA p0490003, d0490051 Page Number 10 of 22. Test Setup: Radiated Emissions FCC ID: R8KUGWM1USHB33 MFA p0490003, d0490051 Page Number 21 of 22. Test Setup: A/C Powerline Conducted Emissions