R8KUGWW2USHN33AWIRELESS USB

WirelessUSB™ - UGWW2US Solutions for a Real Time World User Manual UM-UGWW2US 1 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Toll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 UNIGEN CORP. WIRELESS MODULE PRODUCTS P ART NUMBER FAMILY: UGWW2US SERIES JUNO-M WIRELESSUSB™ RADIO MODULE USER MANUAL FCC ID: R8KUGWW2USHN33A Issue Date: 2 March 2005 Revision: 0.90 Revision History Rev. No. History Issue Date Remarks 0.9 Draft Release 2 March, 2005 Pending FCC Grant # 0.91 2 nd Draft Inclusion of FCC Grant THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. Unigen Corporation disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppel or otherwise, to any intellectual property rights is granted herein. *Third-party brands, names, and trademarks are the property of their respective owners. Copyright © Unigen Corporation, 2004 WirelessUSB™ - UGWW2US Solutions for a Real Time World User Manual UM-UGWW2US 2 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Toll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL 4 User Guide Information 5 United States of America Requirements 5 General User Guide Requirements 5 Topics Not Covered 6 UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA) 7 Design Criteria for Modular Approval 7 General Conditions 7 Antennae 7 Antenna Interconnect & Impedance Error! Bookmark not defined. Physical Implementation Error! Bookmark not defined. Emissions Compliance Testing 7 Co-location of Additional Transmitters 8 Product Labeling Requirements 8 INDUSTRY CANADIAN REGULATORY APPROVAL 9 Design Criteria for Modular Approval 9 General Conditions 9 Antennae 9 Antenna Interconnect & Impedance Error! Bookmark not defined. Physical Implementation Error! Bookmark not defined. Emissions Compliance Testing 9 Product Labeling Requirements 10 WirelessUSB™ - UGWW2US Solutions for a Real Time World User Manual UM-UGWW2US 3 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Toll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 EUROPEAN UNION REGULATORY APPROVAL 11 Design Criteria for Modular Approval 11 General Conditions 11 Antennae 11 Antenna Interconnect & Impedance 11 Emissions Compliance Testing 12 Exterior Labeling Requirements 13 UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) 14 CONTACT INFORMATION 14 APPENDIX A: 15 Agency Certifications: 15 Regulatory Compliance Statement: 15 EUROPEAN UNION “DECLARATION OF CONFORMITY” 16 MECHANICAL CHARACTERISTICS: 16 APPENDIX B: 17 FCC Grant# - R8KUGWW2USHN33A 17 WirelessUSB™ - UGWW2US Solutions for a Real Time World User Manual UM-UGWW2US 4 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Toll Free: (800) 826.0808 Copyright Unigen Corporation, 2004 ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWW2US WirelessUSB™ module (the “UGWW2US”) marketed under the name JUNO-W, is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4-GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate UGWW2US throughout the world. For purposes of ease of integration, time to market, and product surety, Unigen submitted UGWW2US to relevant agencies and obtained regulatory approvals for specific countries. UGWW2US was approved under the “Modular Approval (MA) Grant”. This certification represents a significant cost savings to the OEM. The radio certification portion of this grant is transferable to Digital Electronic Device manufacturers given adherence to specific implementation criteria noted herein. Any modification of the UGWW2US will void the manufacturer’s warranty. Any alteration or deviation from the documented installation and/or use of the UGWW2US will void the MA Grant as it applies to the end-product. In the event the Digital Electronic Device manufacturer alters the herein described and approved installation of the UGWW2US, the end-product may require a complete battery of regulatory agency certification test Digital Electronic Device manufacturer may be required to submit to a complete battery of tests, depending on the requirements noted in the region they wish to sell their product. The MA Grant provides that Digital Electronic Device manufacturers who incorporate UGWW2US as tested and approved, and can be relieved from having to perform the Radio Regulatory certification portion of the respective agency certification. The MA Grant is valid only in countries that recognize the MA Grant certification process. Countries currently accepting the MA Grant include; the USA, Canada, and many European countries as noted in the General User Guide Requirements Section of this document. Terms and conditions of regulatory approval for these countries are also described herein. However, this “grandfathered” radio certification does not relieve the Digital Electronic Device manufacturers from submitting their device for digital emissions certifications. Electronic device manufacturers may disregard the requirements of this section provided they accept full responsibility for regulatory type-approval of the electronic device with an integrated UGWW2US wireless module. WirelessUSB™ - UGWW2US Solutions for a Real Time World User Manual UM-UGWW2US 5 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX:…

Text truncated - open the document above for the full version.

Solutions for a Real Time World 45388 Warm Springs Blvd. Fremont, CA 94539 [email protected] TEL: (510) 668.2088 FAX: (510) 661.2788 http://www.unigen.com Customer Comment Line: (800) 826.0808 Copyright Unigen Corporation, 2004 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, Maryland 21046 March 2, 2005 FCC ID: R8KUGWW2USHN33A Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. The accompanying Form 731 is being filed with the commission on our behalf by M. FLOM ASSOCIATES, INC., a consulting and testing laboratory. Included as exhibits with the enclosed application are block diagrams, schematics, and a detailed description of the theory of operation of the device. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. It is not our intention, however, to make our proprietary process a matter of public record. In view of the fact that the schematics, disclose the mechanism of our process, we ask that these portions (schematics) of our application be withheld from public inspection as provided under FCC section 0.459. We request therefore that these documents and this letter be segregated from the body of our evaluation report and withheld from public inspection. Thank you for your attention. Please let the undersigned know if the Commission disagrees with our position or requires further justification. Sincerely, Mark Morrissey Director of Business Development Unigen Corporation

FCC ID:R8KUGWW2USHN33A IC: 5125A-UGWW2US NMB-003 B ICES-003 B

FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Date: March 9, 2005 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Unigen Corporation Equipment: Serial Port Communication Device FCC ID: R8KUGWW2USHN33A FCC Rules: 15.247, Modular Approval, Confidentiality Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. Filing fees are attached. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, David E. Lee, Compliance Test Manager enclosure(s) cc: Applicant DEL/del FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 List Of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: Unigen Corporation FCC ID: R8KUGWW2USHN33A By Applicant: 1. Letter Of Authorization 2. Identification Drawings Id Label Location Info Attestation Statement(S) Location of Compliance Statement 3. Documentation: 2.1033(B) (3) User Manual(S) (4) Operational Description (5) Block Diagram (5) Schematic Diagram (7) External Photographs Internal Photographs Parts List Tune Up Info Active Devices 4. Draft Specification Information By M.F.A. Inc. A. Testimonial & Statement of Certification FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Transmitter Certification of FCC ID: R8KUGWW2USHN33A Serial Port Communication Device (Module) to Federal Communications Commission Rule Part(s) 15.247, Modular Approval, Confidentiality Date Of Report: March 9, 2005 On the Behalf of the Applicant: Unigen Corporation At the Request of: P.O. 27955 Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Attention of: Mark Morrissey, Director of Business Development (800) 826-0808; (510) 668-2088 ext 2087 Email: [email protected] Supervised By: David E. Lee, Compliance Test Manager FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 The Applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Table Of Contents Rule Description Page . Test Report 1 2.1033(c) General Information Required 2 . Standard Test Conditions and Engineering Practices 6 15.247(b). Maximum Peak Output Power 7 15.247(c). Out of Band Emissions 10 15.205. Restricted Bands Of Operation 12 15.247(a)(2). Allowed Occupied Bandwidth 16 15.207 A/C Powerline Conducted Emissions 22 FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Page Number 1 of 25. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) Test Report b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d0530023 d) Client: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 e) Identification: Serial Port Communication Device FCC ID: R8KUGWW2USHN33A Description: Modular Transceiver f) EUT Condition: Not required unless specified in individual tests. g) Report Date: March 9, 2005 EUT Received: February 14, 2005 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: David E. Lee, Compliance Test Manager n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Page Number 2 of 25. List Of General Information Required For Certification In Accordance with FCC Rules and Regulations, Volume II, Part 2 and to 15.247, Modular Approval and Confidentiality. Sub-Part 2.1033 (c)(1): Name and Address of Applicant: Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94539 Manufacturer: Applicant (c)(2): FCC ID: R8KUGWW2USHN33A Model Number: Serial Port Communication Device (c)(3): Instruction Manual(s): Please See Attached Exhibits (c)(4): Type of Emission: DSSS (c)(5): FREQUENCY RANGE, MHz: 2402 to 2479 (c)(6): Power Rating, W: 0.00096 Switchable Variable X N/A (c)(7): Maximum Power Rating, W: Non FH < 1W Peak 15.203: Antenna Requirement: X The antenna is permanently attached to the EUT The antenna uses a unique coupling The EUT must be professionally i…

Text truncated - open the document above for the full version.

FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Page Number 9 of 25. Test Setup: Radiated Emissions State: Anechoic Pre-scan State: OATS FCC ID: R8KUGWW2USHN33A MFA p0520004, d0530023 Page Number 24 of 25. Test Setup: A/C Powerline Conducted Emissions