RC6AWP-914T802.11b/g WIRELESS CARDBUS PC CARD

RaConfig Operation Manual RaConfig or windows zero configuration Start RaConfig Utility Site Survey Page Encryption Setting [WEP/TKIP/AES] 802.1X Authentication CA Server Setting Profile Page Link Status Page Statistic Page Advance Page Country Channel List QoS Page About Page Example on adding profile in site survey page Example to add profile in profile page Example to configure connection with WEP on Example to configure connection with WPA-PSK Example to configure connection with WPA2-PSK Example to configure connection with WPA Example to configure connection with WPA2 Example to configure to enable Wi-Fi Multi-Media Example to configure to enable WMM – Power Save Example to configure to enable DLS (Direct Link Setup) EXCURSUS Excursus The above setting is test platform by RaLink technology corp. User can set the function in accordance with A.P. Acknowledgements: “This product includes software developed by MDC and its licensors. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”. This product includes cryptographic software written by Eric Young (eay@cryptsoft .com). This product includes software written by Tim Hudson ([email protected]). Example to configure to enable DLS (Direct Link Setup) 1. Click “Direct Link Setup Enable”. And Click “Apply” button. 2. Change to “Site Survey Page”. And add a AP that supports DLS features to a Profile. The result will look like the below figure in Profile page. The setting of DLS indicates as follow: 1. Fill in the blanks of Direct Link with MAC Address of STA. The STA must conform to two conditions as follow: Connect with the same AP that support DLS features. Have to enable DLS. 2. Timeout Value represents that it disconnect automatically after some seconds. The value is integer. The integer must be between 0~65535. It represents that it always connects if the value is zero. Default value of Timeout Value is 60 seconds. 3. Click “Apply” button. The result will look like the below figure. Describe “DLS Status” as follow: 1. As the up figure, after configuring DLS successfully, show MAC address of the opposite side and Timeout Value of setting in “DLS Status”. In “DLS Status” of the opposite side, it shows MAC address of myself and Timeout Value of setting. 2. Display the values of “DLS Status” to “Direct Link Setup” as follow: 1. In “DLS Status”, select a direct link STA what you want to show it’s values in “Direct Link Setup”. 2. Double click. And the result will look like the below figure. 3. Disconnect Direct Link Setup as follow: 1. Select a direct link STA. 2. Click “Tear Down” button. The result will look like the below figure. Example to configure to enable WMM – Power Save 1. Click “WMM – Power Save Enable”. And Click “Setting...” button. 2. After clicking “Setting...” button, show “Power Save Setting” dialog. Please select which ACs you want to enable. Then click “Apply” button. The setting of enabling WMM – Power Save is successfully. Example to configure to enable Wi-Fi Multi-Media If you want to use “WMM – Power Save” or “Direct Link”, you must enable WMM. The setting method of enabling WMM indicates as follows: 1. Click “WMM Enable”. 2. Click “Apply”. 3. Change to “Site Survey Page”. And add a AP that supports WMM features to a Profile. The result will look like the below figure in Profile page. Configure connection with WPA2 by 802.1x setting 1. Select A.P with WPA2 authentication mode. 2. Click CONNECT or double click the intended network. 3. Authentication & Security page will pop up. TKIP, AES and Both (TKIP+AES) security are support. *If AP setup security to Both (TKIP + AES), system defines is AES that security is severely. 4. Click 802.1x setting. 5. 802.1x setting page will pop up. 5. Authentication type and setting method: PEAP: 1. Authentication type chooses PEAP, key identity into wpatest2. Protocol chooses EAP-MSCHAP v2 for tunnel authentication, tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP’s setting. 2. Click OK. The result will look like the below figure. TLS / Smart Card: 1. Authentication type chooses TLS / Smart Card, TLS only need identity that is wpatest2 for server authentication. 2. TLS must use client certicate. Click more to choose certicate. 3. Certicate page will pop up; choose a certicate for server authentication. 3. Display certicate information in use client certicate page. 4. Click OK. The result will look like the below figure. TTLS: 1. Authentication type chooses TTLS, identity is wpatest2. Protocol chooses CHAP for tunnel authentication, tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP’s setting. 2. Click OK. The result will look like the below figure. MD5: 1. Authentication type chooses MD5, MD5 only need identity and password that are wpatest2 and test2 for server authentication. 2. Click OK. The result will look like the below figure. Configure connection with WPA by 802.1x setting 1. Select A.P with WPA authentication mode. 2. Click CONNECT or double click the intended network. 3. Authentication & Security page will pop up. TKIP, AES and Both (TKIP+AES) security are support. *If AP setup security to Both (TKIP + AES), system defines is AES that security is severely. 4. Click 802.1x setting. 5. 802.1x setting page will pop up. 6. Authentication type and setting method: PEAP: 1. Authentication type chooses PEAP, key identity into wpatest2. Protocol chooses EAP-MSCHAP v2 for tunnel authentication, tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP’s setting. 2. Click OK. The result will look like the below figure. TLS / Smart Card: 1. Authentication type chooses TLS / Smart Card, TLS only need identity that is wpatest2 for server authentication. 2. TLS must use client certicate. Click more to choose certicate. 3. Certicate page will pop up; choose a certicate for server auth…

Text truncated - open the document above for the full version.

Card Bus I/F and Power MAC RT2561 Transceiver RT2527 PA SST12LP14A and TX/RX XTAL/5x3.2/40MHz TX RX XTAL

Page:3/6 Report Number: MLT0610P15001 Page:4/6 Report Number: MLT0610P15001 Page:5/6 Report Number: MLT0610P15001 Page:6/6 Report Number: MLT0610P15001

Page:1/6 Report Number: MLT0610P15001 Page:2/6 Report Number: MLT0610P15001

Report Number: MLT0610P15001 Label Format: Label Position: Equipment Label 2.0cmX1.0cm This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received , including Interference that may cause undesired operation. Model No. : AWP-914T FCC ID: RC6AWP-914T Rear View

Page:3/6 Report Number: MLT0610P15001 Page:4/6 Report Number: MLT0610P15001 Page:5/6 Report Number: MLT0610P15001 Page:6/6 Report Number: MLT0610P15001

Page:1/6 Report Number: MLT0610P15001 Page:2/6 Report Number: MLT0610P15001

Product Description - Item no. Product name:802.11b/g wireless Cardbus PC Card This product is designed with the following features, benefits, specifications...etc.: FEATURES & BENEFITS  Easy Installation  Detachable Antenna  Operates in the 2.4GHz, Backward Compatible in a 802.11b environment  Wireless link speeds up to 108Mpbs; 5 times faster than 802.11b devices.  Up to 152-bit WEP Encryption  Seamless roaming from cell to cell and between 802.11b to 802.11g  Support Windows XP/2000 PRODUCT HIGHLIGHTS  COMPATIBLE WITH 802.11b DEVICES This 802.11g Wireless LAN client product with a data transmission rate up to 108Mbps. Operating in 2.4GHz, is backward compatible with other 802.11b wireless LAN devices. UP TO Super-G 28Mbps This Adapter connects you with 802.11g networks at an incredible 28Mbps! And for added versatility, also capable of inter-operating with all the 802.11b wireless products found in homes, businesses, and public wireless hotspots around the country. SPECIFICATIONS INTERFACE Standards IEEE 802.11g, 802.11b Frequency Bands 2.412~ 2.4835GHz ISM Band Modulation Tech 802.11b: CCK,DSSS 802.11g: OFDM Media Access Protocol CSMA/CA with ACK Transmit Power 802.11g :13 dBm 802.11b : 17dBm Receive Sensitivity 11 Mbps 10-5 BER @ -83 dBm, TYP 54 Mbps 10-5 BER @ -70 dBm, TYP Data Rates 802.11b: 11Mbps, 5.5Mbps, 2Mbps, 1Mbps, auto fallback 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps ENVIRONMENTAL SPECIFICATIONS Operating Systems Windows XP/2000 Security 64/128-Bit WEP Key, WPA, WPA-PSK, TKIP Configuration Utility Configuration tray & Zero configuration for WinXP CERTIFICATION PACKAGE CONTENTS

Report No：06CL083-HPUSP09V01 Page: 1 of 22 Version:1.0 SAR Test Report Product Name ： 802.11b/g wireless Cardbus PC Card Model No. ： AWP-914T, NV-914T, WA-2510, HWGPCMCIA-54, TER/GCBA2 Applicant ： Amigo Technology Inc. Address ： 1F, No. 258, Sec 2, Ti-Ding Blvd., Nei Hu, Taipei, Taiwan 114, R.O.C. Date of Receipt ：2006/12/13 Issued Date ：2006/12/22 Report No. ：06CL083-HPUSP09V01 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No：06CL083-HPUSP09V01 Page: 2 of 22 Version:1.0 Test Report Certification Issued Date: 2006/12/22 Report No.:06CL083-HPUSP09V01 Product Name ： 802.11b/g wireless Cardbus PC Card Applicant ： Amigo Technology Inc. Address ： 1F, No. 258, Sec 2, Ti-Ding Blvd., Nei Hu, Taipei, Taiwan 114, R.O.C. Manufacturer ： FAIRWAY ELECTRONICS Co., LTD. Model No. ： AWP-914T, NV-914T, WA-2510, HWGPCMCIA-54, TER/GCBA2 Trade Name ： Amigo, Novatech, Sapido, Hercules, Amigo Communication, INC., Guillemot, Thrustmaster, Natopia Applicable Standard ： FCC Oet65 Supplement C June 2001 Test Result ： Max. SAR Measurement (1g) 802.11b: 1.381 W/kg 802.11g: 0.683 W/kg Application Type Certification The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By ： (Eva Huang) Tested By ： (Shine Hsu) Approved By ： (George Chen) Report No：06CL083-HPUSP09V01 Page: 3 of 22 Version:1.0 TABLE OF CONTENTS Description Page 1. General Information.............................................................................. 5 1.1 EUT Description ............................................................................................................5 1.2 Test Environment ...........................................................................................................5 2. SAR Measurement System .................................................................. 6 2.1 ALSAS-10U System Description .................................................................................. 6 2.1.1 Applications ................................................................................................................ 6 2.1.2 Area Scans................................................................................................................... 6 2.1.3 Zoom Scan (Cube Scan Averaging)............................................................................ 7 2.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty......................................... 7 2.2 Isotropic E-Field Probe .................................................................................................. 7 2.2.1 Isotropic E-Field Probe Specification ......................................................................... 9 2.3 Boundary Detection Unit and Probe Mounting Device ................................................. 9 2.4 Daq-Paq (Analog to Digital Electronics) ..................................................................... 10 2.5 Axis Articulated Robot ................................................................................................ 10 2.6 ALSAS Universal Workstation.................................................................................... 11 2.7 Universal Device Positioner......................................................................................... 11 2.8 Phantom Types............................................................................................................. 11 2.8.1 APREL SAM Phantoms ........................................................................................... 12 2.8.2 APREL Laboratories Universal Phantom ................................................................. 12 3. Tissue Simulating Liquid ................................................................... 13 3.1 The composition of the tissue simulating liquid .......................................................... 13 3.2 Tissue Calibration Result ............................................................................................. 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ....................................... 14 4. SAR Measurement Procedure ........................................................... 15 4.1 SAR System Validation................................................................................................ 15 4.1.1 Validation Dipoles..................................................................................................... 15 4.1.2 Validation Result ....................................................................................................... 15 4.2 SAR Measurement Procedure ...................................................................................... 16 5. SAR Exposure Limits ......................................................................... 17 6. Test Equipment List............................................................................ 18 7. Measurement Uncertainty .................................................................. 19 8. Test Results ......................................................................................... 20 8.1 SAR Test Results Summary ......................................................................................... 20 Report No：06CL083-HPUSP09V01 Page: 4 of 22 Version:1.0 Appendix A. SAR System Validation Data........................................................................ 22 Appendix B. SAR measurement Data................................................................................ 22 Appendix C. Test Setup Photographs & EUT Photographs............................................... 22 Appendix D. Probe Calibration Data ................................................................................. 22 Appendix E. Dipole Calibration Data .................................................................…

Text truncated - open the document above for the full version.

Report No：06CL083-HPUSP09V01 Page: 1 of 4 Version:1.0 SAR System Validation Data ALSAS-10U VER 2.3.1 APREL Laboratories SAR Test Report Report Date : 15-Dec-2006 Measurement Date : 15-Dec-2006 Product Data Device Name : Dipole-2450 Type : Dipole Frequency : 2450.00 MHz Max. Transmit Pwr : 0.25 W Drift Time : 0 min(s) Length : 51.5 mm Width : 3.6 mm Depth : 30.4 mm Power Drift-Start : 11.233 W/kg Power Drift-Finish: 11.265 W/kg Power Drift (%) : 0.293 Phantom Data Name : APREL-Uni Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : HEAD Serial No. : 325-H Frequency : 2450.00 MHz Last Calib. Date : 15-Dec-2006 Temperature : 21.50 °C Ambient Temp. : 21.90 °C Humidity : 57.00 RH% Epsilon : 38.18 F/m Sigma : 1.844 S/m Density : 1000.00 kg/cu. m Probe Data Name : Probe 264 Model : E020 Type : E-Field Triangle Serial No. : 264 Last Calib. Date : 21-Mar-2006 Frequency : 2450.00 MHz Duty Cycle Factor: 1 Conversion Factor: 5.0 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Report No：06CL083-HPUSP09V01 Page: 2 of 4 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x5x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Frequency : 2450 1 gram SAR value : 12.954 W/kg 10 gram SAR value : 5.864 W/kg Area Scan Peak SAR : 15.370 W/kg Zoom Scan Peak SAR : 27.223 W/kg Report No：06CL083-HPUSP09V01 Page: 3 of 4 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 4 of 4 Version:1.0 Report No：06CL083-HPUSP09V01 Page: 1 of 32 Version:1.0 SAR Measurement Data ALSAS-10U VER 2.3.1APREL Laboratories SAR Test Report (802.11b) Report Date : 15-Dec-2006 Measurement Date : 15-Dec-2006 Product Data Device Name : MAX LIGHT Type : Other Model : AWP-914T, NV-914T, WA-2510, HWGPCMCIA-54, TER/GCBA2 Frequency : 2450.00 MHz Length : 118.4 mm Width : 54.4 mm Depth : 6 mm Antenna Type : Internal Phantom Data Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : BODY Serial No. : 325-B Frequency : 2450.00 MHz Last Calib. Date : 15-Dec-2006 Temperature : 21.50 °C Ambient Temp. : 21.90 °C Humidity : 57.00 RH% Epsilon : 51.21 F/m Sigma : 1.983 S/m Density : 1000.00 kg/cu. M Probe Data Name : Probe 264 Model : E020 Type : E-Field Triangle Serial No. : 264 Last Calib. Date : 21-Mar-2006 Frequency : 2450.00 MHz Duty Cycle Factor: 1 Conversion Factor: 5.2 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Report No：06CL083-HPUSP09V01 Page: 2 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm Power Drift-Start : 0.717 W/kg Power Drift-Finish: 0.739 W/kg Power Drift (%) : 3.167 DUT Position : Touch EUT BACK Channel : 1 1 gram SAR value : 1.381 W/kg 10 gram SAR value : 0.646 W/kg Area Scan Peak SAR : 1.403 W/kg Zoom Scan Peak SAR : 2.712 W/kg Report No：06CL083-HPUSP09V01 Page: 3 of 32 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 4 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Power Drift-Start : 0.638 W/kg Power Drift-Finish: 0.662 W/kg Power Drift (%) : 3.871 DUT Position : Touch EUT BACK Channel : 6 1 gram SAR value : 1.240 W/kg 10 gram SAR value : 0.569 W/kg Area Scan Peak SAR : 1.464 W/kg Zoom Scan Peak SAR : 2.532 W/kg Report No：06CL083-HPUSP09V01 Page: 5 of 32 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 6 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Power Drift-Start : 0.444 W/kg Power Drift-Finish: 0.483 W/kg Power Drift (%) : 0.087 DUT Position : Touch EUT BACK Channel : 11 1 gram SAR value : 1.143 W/kg 10 gram SAR value : 0.566 W/kg Area Scan Peak SAR : 1.176 W/kg Zoom Scan Peak SAR : 2.141 W/kg Report No：06CL083-HPUSP09V01 Page: 7 of 32 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 8 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Power Drift-Start : 0.598 W/kg Power Drift-Finish: 0.601 W/kg Power Drift (%) : 0.552 DUT Position : Touch EUT TOP Channel : 1 1 gram SAR value : 0.802 W/kg 10 gram SAR value : 0.370 W/kg Area Scan Peak SAR : 0.974 W/kg Zoom Scan Peak SAR : 1.831 W/kg Report No：06CL083-HPUSP09V01 Page: 9 of 32 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 10 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Power Drift-Start : 0.565 W/kg Power Drift-Finish: 0.572 W/kg Power Drift (%) : 1.164 DUT Position : Touch EUT TOP Channel : 6 1 gram SAR value : 0.704 W/kg 10 gram SAR value : 0.338 W/kg Area Scan Peak SAR : 0.695 W/kg Zoom Scan Peak SAR : 1.421 W/kg Report No：06CL083-HPUSP09V01 Page: 11 of 32 Version:1.0 This is previous page plot (zoom in) Report No：06CL083-HPUSP09V01 Page: 12 of 32 Version:1.0 Measurement Data Crest Factor : 1 Tissue Temp. : 21.50 °C Ambient Temp. : 21.90 °C Area Scan : 5x6x1 : Measurement x=12mm, y=12mm, z=4mm Zoom Scan : 7x7x7 : Measurement x=5mm, y=5mm, z=5mm Power Drift-Start : 0.468 W/kg Power Drift-Finish: 0.476 W/kg Power Drift (%) : 2.028 DUT Position : Touch EUT TOP Channel : 11 1 gram SAR value : 0.531 W/kg 10 gram SAR value : 0.243 W/kg Area Scan Peak SAR : 0.742 W/kg Zoom Scan Peak SAR : 1.130 W/kg Report…

Text truncated - open the document above for the full version.

Page: 1 of 21 Appendix - Probe Calibration Miniature Isotropic RF Probe M/N: ALS-E-020 S/N: 264 2450MHz Head Calibration page 2~11 2450MHz Body Calibration page 12~21 Page: 2 of 21 Page: 3 of 21 Page: 4 of 21 Page: 5 of 21 Page: 6 of 21 Page: 7 of 21 Page: 8 of 21 Page: 9 of 21 Page: 10 of 21 Page: 11 of 21 Page: 12 of 21 Page: 13 of 21 Page: 14 of 21 Page: 15 of 21 Page: 16 of 21 Page: 17 of 21 Page: 18 of 21 Page: 19 of 21 Page: 20 of 21 Page: 21 of 21 Appendix - Dipole Calibration Validation Dipole 2450MHz P/N: ALS-D-2450-S-2 S/N: QTK-319

55 44 33 22 11 D D C C B B A A SYNCLK RF_LE-G# GND RF_LE-G# GND RFLDOBP IREF SYNDATA RADIO_PD# SYNDATA IREF SYNCLK 40MX1 RX_BB_Q- RX_BB_Q- RFOUTG+RFING+ PA_RFING GND GNDGND VCCAVCCA RFIN_G RFOUTG-RFING- GND TXR_VO3 VCTRL1 TXR_VO3 GND TXR_VO2 VCCA C_VCC VE RFRC C_VCC TXR_VO3 GNDGND RFRX_PE RFRX_PE RFTX_PE RFTX_PE VCCA VCCA VCCA VCCA VCCARX_BB_Q+ RX_BB_Q+ RX_BB_I- RX_BB_I- RX_BB_I+ RX_BB_I+ TX_BB_I- RF_VCCD VCCA GND 1.8VA 1.8VA GND GND GND GND GND3.3VA 3.3VD VCCA GND VCCA GND GND GND TX_BB_I- TX_BB_Q- TX_BB_Q-TX_BB_Q+ TX_BB_Q+ TX_BB_I+ TX_BB_I+ TXR_VO2 TXR_VO2 40MI TXR-40MO GND F40M 40MX2 GND RFIN_F GND RF_LE-G#IREF RADIO_PD# SYNCLKSYNDATA RX_BB_Q- RFIN_G PA_RFING RFTX_PERFRX_PE RX_BB_Q+RX_BB_I-RX_BB_I+TX_BB_I-TX_BB_I+TX_BB_Q+TX_BB_Q- 40MI GND VCCA GND VCCA GND VCCA GND GND GND GND GND GND GNDGND VCCA VCCA GND 1.8VA GND GND GND GND GND3.3VA 3.3VD VCCA GND GND VCCA GND GND GND TitleSize Document Number Rev Date: Sheet of RF 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 TitleSize Document Number Rev Date: Sheet of RF 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 TitleSize Document Number Rev Date: Sheet of RF 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 XTAL:CL=15pF, Co=1.5pF 2 Amigo Technology Co., Ltd. 12 C452 3.3nF C452 3.3nF 1 2 C454 10pF/NI C454 10pF/NI 12 C2454.7uF/NIC2454.7uF/NI 12 C4394.7pFC4394.7pF 1 2 R259 68pF R259 68pF 1 2 R7 0 ohm/SB R7 0 ohm/SB 1 2 L10 3.3nH L10 3.3nH 12 C2440.1uFC2440.1uF 1 2 C491 100pF C491 100pF 12 C4281nFC4281nF 1 2 C414 4.7uF/6.3V C414 4.7uF/6.3V 1 2 L8 2.2nH L8 2.2nH 12 C284.7uF/6.3VC284.7uF/6.3V 12 C4421nFC4421nF 1 2 C15 33pF C15 33pF RFinP2 1 RFinM2 2 VCC2 3 RFoutP2 4 RFoutM2 5 NC 6 NC 7 NC 8 NC 9 NC 10 NC 11 TR_PE 47 CLK 41 Data 42 LE 43 Core_Vcc 21 LO_Vcc 20 VCCA 24 VCCD 29 GND 49 VP1 23 LO_Vc 22 LD_fo 27 CLK_Out 28 Base_Vcc1 37 I_OutP 34 I_OutM 33 Base_Vcc2 32 Q_OutP 31 Q_OutM 30 X1/OSCI 26 X2 25 VCC1 48 Iref 44 Bias_Vcc 45 RF_PE 46 LDO_Out3 17 I_InP 40 I_InM 39 Q_InP 36 Q_InM 35 LDO_Bypass 15 LDO_In 14 LDO_PE 13 LDO_Out1 12 LDO_Out2 16 LO_IOM 18 LO_IOP 19 DAC_Vcc 38 U47RT2527-48PU47RT2527-48P 1 2 C437 10pF C437 10pF 12 C4261nFC4261nF 1 2 C492 4.7pF C492 4.7pF 1 2 R115 0 ohm/SB R115 0 ohm/SB 12 C417 100pF C417 100pF 12 C27 33pF/NI C27 33pF/NI 1 2 R20 0 ohm/SB R20 0 ohm/SB 1 2 C461 0.01uF C461 0.01uF 1 2 L55 3.3nH L55 3.3nH 1 2 C45 1.8pF C45 1.8pF 1 2 C24 4.7pF C24 4.7pF 12 L360.8pFL360.8pF 12 C4 1.2pF/NI C4 1.2pF/NI 12 C446 100pF C446 100pF 1 2 R160 27 R160 27 1 2 R260 68pF R260 68pF 12 C413 4.7uF/6.3V C413 4.7uF/6.3V 1 2 C419 0.01uF C419 0.01uF 1 2 4 3 5x3.2 U50 XTAL/5x3.2/40MHz 5x3.2 U50 XTAL/5x3.2/40MHz 1 2 L54 1.5nH L54 1.5nH 12 C453 15pF C453 15pF 1 2 C409 4.7uF/6.3V C409 4.7uF/6.3V 1 2 C321 1nH C321 1nH 1 2 R267 18K R267 18K 1 2 C443 39pF C443 39pF 1 2 C464 10nF C464 10nF 1 2 L260 ohmL260 ohm 1 2 L63 0 ohm/NI L63 0 ohm/NI 1 2 C48 1.2pF C48 1.2pF 55 44 33 22 11 D D C C B B A A RFIN_G DTR2 TR_SWN0TR_SW0 AVC2 ANTSEL_NANTSEL_P MVC1AVC2 XSPAO2 TR_SWTR_SWN SXR2 DTR5 PA_RFO DET2 VC1 PA_RFING 3.3VD PAF 3.3VD PARFING GND PA_PE_G 3.3VD GND PAG VB1 PA_IN PAIN GND ANTE12 ANT_E1 STR25 ANTE1ANTE2 GND CTR25 ANTE22 STR25 GND GND GND GND GND GND GND GND GND ANTE33 ANTE3 RFIN_G TR_SWN0TR_SW0ANTSEL_PANTSEL_N PA_RFING [2] PA_PE_G [4] GND GND GND GND GND GND 3.3VD GND GND GND TitleSize Document Number Rev Date: Sheet of PA 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 TitleSize Document Number Rev Date: Sheet of PA 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 TitleSize Document Number Rev Date: Sheet of PA 1.0 AWP-914T 802.11 b /g CardBus C 5 Friday, September 29, 2006 ANT-AANT-B C14 should beinstalled bymanually whenthe RF functiontesting isfinished. 3 Amigo Technology Co., Ltd. 12 C9 0.1uF C9 0.1uF 12 C472 C/NI C472 C/NI 12 C468C/NIC468C/NI 12 C62.7pFC62.7pF 1 2 C10 1.8pF C10 1.8pF 1 2 L4 4.7nH L4 4.7nH 1 2 C466 10pF C466 10pF 1 2 C21 10pF/NI C21 10pF/NI 1 2 C465 2.2nH C465 2.2nH 12 C36210uF/6.3VC36210uF/6.3V 1 2 R282 1K ohm/SB R282 1K ohm/SB 1 2 R12 1K ohm/SB R12 1K ohm/SB 1 2 R210 390 ohm R210 390 ohm 1 2 C469 2.2nH C469 2.2nH 1 2 C23 10pF C23 10pF 12 C130.5pFC130.5pF E1E1 12 C4672.2pFC4672.2pF 12 C1 2.7pF C1 2.7pF 12 C5 0.1uF/NI C5 0.1uF/NI 12 L5 2.2nH L5 2.2nH OUT1 3 GND 2 OUT2 1 VC2 6 IN 5 VC1 4 U2uPG2179TBU2uPG2179TB 12 C224.7nH/NIC224.7nH/NI 1 2 C525 10pF C525 10pF 12 C325 10pF/NI C325 10pF/NI 1 2 R281 1K ohm/SB R281 1K ohm/SB 1 2 R151K ohm/SBR151K ohm/SB 12 C11 0.1uF C11 0.1uF 1 2 C29 10pF C29 10pF 12 C51210pF/NIC51210pF/NI 12 C341 10pF/NI C341 10pF/NI 12 L3 3.9nH L3 3.9nH 1 2 C26 10pF C26 10pF 1 2 C16 0.8pF C16 0.8pF OUT1 3 GND 2 OUT2 1 VC2 6 IN 5 VC1 4 U14uPG2179TBU14uPG2179TB E2E2 RFin 2 NC 13 NC 1 Vdet_out 9 NC 8 Vref 6 NC 4 RFOUT 10 RFOUT 11 Vcc2 12 NC 15 Vcc1 16 GND 17 NC 14 Vccb 5 RFin 3 Vref 7 U53 SST12LP14A U53 SST12LP14A 1 2 L6 2.2nH L6 2.2nH 12 C462 0.1uF/NI C462 0.1uF/NI 1 2 C14 0 ohm C14 0 ohm 1 2 3 CON1 SMA/UFLR/NI CON1 SMA/UFLR/NI 1 2 C7 1nH C7 1nH 12 C18 10pF/NI C18 10pF/NI 12 L1 2.7pF L1 2.7pF 12 L2 1nH L2 1nH 12 C21.8pFC21.8pF 12 C17 0.8pF C17 0.8pF 12 C511 10pF/NI C511 10pF/NI 12 C4712.2pFC4712.2pF 12 L7 2.2nH L7 2.2nH 12 C201.2pF/NIC201.2pF/NI 12 C34010pF/NIC34010pF/NI 55 44 33 22 11 D D C C B B A A 1.8VD 1.8VD 3.3VD 3.3VD 3.3VD 1.8VA GND PARCBE1B 3.3VD CBE0B 3.3VD 1.8VD LED_LKACT# DEVSELBSERRBPERRBSTOPBTRDYBCLKRUNB 1.8VD FRAMEBIRDYBCBE2B 1.8VD 3.3VD 1.8VD IDSEL INTAB REQB GNTB MRSTBREQB MRSTB CBE3BGNTB CBE3B INTAB AD23 AD30 AD7AD12AD13AD5AD18AD10 AD31 AD29 AD27 AD22 AD21 AD19AD3AD9 AD24 AD25 AD16 AD[0..31] AD8AD2 AD28 AD26 AD4AD17 AD20 AD14AD15 AD6AD11AD1AD0 CCLK CCLK 1.8VC 1.8VC 1.8VC VREF25P 3.3VD 1.8VD 1.8VD 1.8VA1.8VA1.8VC1.8VA EECS EESK EEDI EEDO RFTX_PERFRX_PEANTSEL_NANTSEL_PRADIO_PD# GND PA_PE_G PA_PWR TX_BB_Q-TX_BB_I+TX_BB_Q+TX_BB_I- VREF IREF TSSI_AG 3.3VARF_LE0 3.3VD LD2P_24G 3.3VA LD1P_ACT GND GND GPIO5 RF_CLKRF_DATA0 VREF25N 1.8VDPLL 1.8VD 1.8VDPLL GND 1.8VDPLL 1.8VD 3.3VD IDSEL 3.3VD 1.8VA RX_BB_Q+RX_BB_I+ 1.8VA RX_BB_Q-RX_BB_I- VC…

Text truncated - open the document above for the full version.

Page: 1 /80 Report Number: MLT0610P15001 (FCC : Part 15 Subpart B & C (15.247) / ANSI C63.4-2005) Product :802.11b/g wireless Cardbus PC Card Trade Name :Amigo (The other see Appendix II) Model No. :AWP-914T (The other see Appendix II) Applicant :Amigo Technology Inc. Applicant Address :1F,No. 285,Sec 2,Ti-Ding Blvd., Nei Hu, Taipei,Taiwan 114, R.O.C. Page: 2 /80 Report Number: MLT0610P15001 Report Number MLT0610P15001 Applicant Amigo Technology Inc. Product 802.11b/g wireless Cardbus PC Card Sample Received Date 2006/10/04 Report Prepared By Jesse Tien Signature Date Prepared 2006/10/05 ～ 2006/11/03 Report Authorized By Roger Chen Signature Date Authorized 2007/01/02 Test By Max Light Technology Co., Ltd. Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan., R.O.C. Office：Tel: 886-2-2363-2447 Fax: 886-2-2363-2597 Lab：Tel:886-2-2663-3486 Fax:886-2-2663-3582 I I t t m m a a y y b b e e d d u u p p l l i i c c a a t t e e d d c c o o m m p p l l e e t t e e l l y y f f o o r r l l e e g g a a l l u u s s e e w w i i t t h h t t h h e e a a l l l l o o w w a a n n c c e e o o f f t t h h e e a a p p p p l l i i c c a a n n t t . . I I t t s s h h a a l l l l n n o o t t b b e e r r e e p p r r o o d d u u c c e e d d e e x x c c e e p p t t i i n n f f u u l l l l , , w w i i t t h h o o u u t t t t h h e e w w r r i i t t t t e e n n a a p p p p r r o o v v a a l l o o f f o o u u r r l l a a b b o o r r a a t t o o r r y y . . Page: 3 /80 Report Number: MLT0610P15001 Table of Contents : I. General 5. II. Conducted Emissions Requirements 9. III. Radiated Emissions Requirements 19. IV. Maximum Conducted Output Power Requirements 41. V. Minimum 6dB RF Bandwidth Requirements 46. VI. Maximum Power Density Requirements 51. VII. Out of Band Conducted Emissions Requirements 56. VIII. Band Edges Requirements 74. IX. Antenna Requirements 77. Appendix I ( EUT Test Setup ) 78. Appendix II ( Brand / Trade Name & Model No. List ) 80 Page: 4 /80 Report Number: MLT0610P15001 CERTIFICATION We here by verify that : The test data, data evaluation, test procedures and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2005. All test were conducted by MLT(Max Light Technology Co.,Ltd) Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan, R.O.C Also, we attest to the accuracy of each. We further submit that the energy emitted by the sample EUT tested as described in the report is in compliance with Class B radiated and conducted emission limit of FCC Rules Part 15 Subpart B & C (15.247). Applicant Name Amigo Technology Inc. Applicant Address 1F,No. 285,Sec 2,Ti-Ding Blvd., Nei Hu, Taipei, Taiwan 114, R.O.C. Manufacturer Name FAIRWAY ELECTRONIC CO.,LTD. Manufacturer Address Huang Cjong No. 3 Industrial Area, Zhong Tang Town, Dong Guan, City, Guang Don…

Text truncated - open the document above for the full version.