RFF-LD4BTHandheld Laser Distance Meter

Leica DISTO TM E7500i The original laser distance meter Leica DISTO TM E7500i 792324 1 ENTable of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Basic measuring screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Selection screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Pointfinder (Viewscreen) - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Multifunctional endpiece - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Permament / Minimum-Maximum measuring- - - - - - - - - - - - - 5 Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Pointfinder (Viewscreen) - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Tilt units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Digital level ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 De-/Activate keypad lock - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Unlock keypad- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Personalized favorites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Illumination - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 De-/Activate Bluetooth Smart - - - - - - - - - - - - - - - - - - - - - - 10 Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - 11 Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Offset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Functions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Timer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Calculator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Adjusting measuring reference/tripod - - - - - - - - - - - - - - - - - 14 Memory- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Height-profile measurement - - - - - - - - - - - - - - - - - - - - - - - - 16 Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 Triangular area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 Long range mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 Inclination tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 Height tracking - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 Trapezium - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24 Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25 Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26 Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27 Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27 Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - 27 Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27 Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Disposal- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28 Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - 28 FCC statement (applicable in U.S.) - - - - - - - - - - - - - - - - - - - 29 Use of the product with Bluetooth® - - - - - - - - - - - - - - - - - - 29 Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29 Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30 Leica DISTO TM E7500i 792324 2 ENInstrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them. The symbols used have the following meanings: WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury. CAUTION Indicates a potentially hazardous situation or an unint…

Text truncated - open the document above for the full version.

Applicant's declaration concerning User Manual Statements Federal Communications Commission & Industry Canada Re: application for Leica DISTO E7500i FCC ID: RFF‐LD4BT IC: 3177A ‐LD4BT We, Leica Geosystems AG, declare that the North American version of the User Manual for the Leica DISTO E7500i will include the following statements: FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Jabra (GN Netcom) will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device and its antenna must not be co‐loaded or operating in conjunction with any other antenna or transmitter. Industry Canada Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment as per RSS‐102 issue 2. The above IC statement will be transateled into French in the final version.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Leica Geosystems AG Address : Heinrich-Wild-Strasse City: Heerbrugg Country: Switzerland To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: RFF-LD4BT Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Disclosure of this information prior to product availablitly would cause substantial competitive harm and provide unjustified benfits for competitors. Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Date: 14 Dec. 12 Name and signature of applicant: Patrick Lomax Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RFF-LD4BT 3177A-LD4BT

Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Direct Phone: +41 71 727 3683 Phone +41 71 727 31 31 E-Mail: [email protected] www.leica-geosystems.com Heerbrugg, 5 December 2012 Warning Position Leica DISTO E7500i Dear Best regards Johannes Maunz

MDE_LEICA_1201_FCC_MPE FCC ID RFF-LD4BT IC ID: 3177A - LD4BT Maximum Permissible Exposure as specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Calculations 2.4 GHz band The output power at antenna input terminal: -2.56 dBm Prediction distance R: 20 cm Prediction frequency: 2480 MHz Antenna Gain: 0.5 dBi MPE limit S: 1 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4R²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum Power density Limit Verdict 0.0001 mW/cm² 1.0 mW/cm² Pass Note. The calculation was made under the consideration of the duty cycle effect. Yours sincerely _____________________________ Patrick Lomax, Project Manager

Final Report on DISTO E7500i with Bluetooth Low Engery Tranceiver (FCCID:RFF-LD4BT /ICID:3177A-LD4BT MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C Report Reference: December 13, 2012 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C 2.2 Detailed Description of OUT Samples Sample : A01 OUT Identifier DISTO E7500i with Bluetooth Low Engery Tranceiver Sample Description Radiated Sample Serial No. LD4-2 HW Status V06 SW Status 0.9 Sample : B01 OUT Identifier DISTO E7500i with Bluetooth Low Engery Tranceiver Sample Description Conducted Sample Serial No. LD4-1 HW Status V06 SW Status 0.9 Low VoltageLow Temp. 2.8 V-10 °C High Temp.High Voltage 3.2 V55 °C Normal Temp.Nominal Voltage 3.0 V23 °C 2.3 OUT Features Features for OUT: DISTO E7500i with Bluetooth Low Engery Tranceiver Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 BT EUT supports Bluetooth data rate of 1 Mbps with GFSK modulation in the band 2400 MHz - 2483.5 MHz Iant Integral Antenna: permanent fixed antenna, which may be built-in, designed as an indispensable part of the equipment TantC temporary antenna connector, which may be only built-in for testing, designed as an example part of the equipment Page 4 of 50 Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C 2.4 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No. List of OUT samplesList of auxiliary equipment S01_A01 A01Radiated Sample Sample: S01_B01 B01Conducted Sample Sample: 3 Results 3.1 General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: 1. The laboratory environmental conditions are recorded and available in the Interlab system for each performed test. 2. Local Transmit and Receive mode is established via a specially menu interface which is not available to the end user. Note: 3.2 List of Test Specification Test Specification: FCC part 2 and 15 Version10-1-11 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 15 - RADIO FREQUENCY DEVICES Page 5 of 50 Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C 3.3 Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 15c.10 Power density §15.247 (e) 15c.10; Frequency = Low/Mid/High2012/11/28S01_B01Lab 2Passed 15c.11 6dB Bandwidth §15.247 (a) (2) 15c.11; Frequency = Low/Mid/High2012/11/28S01_B01Lab 2Passed 15c.2 Spurious radiated emissions §15.247 (d), §15.35 (b), §15.209 15c.2; Frequency = Highest2012/11/28S01_A01Lab 1Passed 15c.2; Frequency = Lowest2012/11/28S01_A01Lab 1Passed 15c.2; Frequency = Middle2012/11/28S01_A01Lab 1Passed 15c.3 Occupied bandwidth §15.247 (a) (1) 15c.3; Occupeid Bandwidth Summary2012/11/28S01_B01Lab 2Passed 15c.4 Peak power output §15.247 (b) (1) 15c.4; Peak power output Summary2012/11/28S01_B01Lab 2Passed 15c.5 Spurious RF conducted emissions §15.247 (d) 15c.5; Frequency = Highest2012/11/28S01_B01Lab 2Passed No Peaks found within 20 dB of limit. 15c.5; Frequency = Lowest2012/11/28S01_B01Lab 2Passed No Peaks found within 20 dB of limit. 15c.5; Frequency = Middle2012/11/28S01_B01Lab 2Passed No Peaks found within 20 dB of limit. 15c.6 Band edge compliance §15.247 (d) 15c.6; Band edge compliance Summary2012/11/28S01_B01Lab 2Passed 15c.6; Frequency = Highest2012/11/28S01_A01Lab 1Passed 15c.7 Dwell time §15.247 (a) (1) (iii) 15c.7; Dwell time Summary2012/11/28S01_B01Lab 2Passed 15c.8 Channel separation §15.247 (a) (1) 15c.8; Channel separation Summary2012/11/28S01_B01Lab 2Passed 15c.9 Number of hopping frequencies §15.247 (a) (1) (iii) 15c.9; Number of hopping frequencies Summary 2012/11/28S01_B01Lab 2Passed Page 6 of 50 Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C 3.4 Detailed Results 3.4.1 15c.10 Power density §15.247 (e) Test: 15c.10; Frequency = Low/Mid/High Result: Passed Setup No.: S01_B01 Date of Test: 2012/11/28 17:34 Body: Test Specification: FCC part 2 and 15 Page 7 of 50 Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part 15 subpart C Detailed Results: 2402 MHz 2426 MHz2440 MHz2480 MHz ModulationConditions Power Density (dBm) Power Density (dBm) Power Density (dBm) Power Density (dBm) GFSK TN, VN-18.4-21.02-20.74-18.97 dBm Power Density Maximum Power Density-18.4 1MAX Ref Lvl -15 dBm Ref Lvl -15 dBm RBW 3 kHz VBW 30 kHz SWT 420 ms RF Att 10 dB 3.8 dB Offset A 1MA UnitdBm 150 kHz/Center2.402 GHzSpan1.5 MHz EXT -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -115 -15 1 Marker 1 [T1] -18.40 dBm 2.40197745 GHz Date: 28.NOV.2012 14:53:35 Page 8 of 50 Reference: MDE_LEICA_1201_FCCa according to Title 47 CFR chapter I part…

Text truncated - open the document above for the full version.

Test Laboratory: Borsigstr. 11 Germany 7Layers AG 40880 Ratingen Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender  Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Photo Report on Test Setups Report Reference: MDE_LEICA_1201_FCC_Photo_Setups Test report Reference: MDE_LEICA_1201_FCC_Photo_Setups Page 2 of 5 Photo 1: Test setup for radiated measurements (Enclosure, below 30 MHz, intentional radiator §15) Test report Reference: MDE_LEICA_1201_FCC_Photo_Setups Page 3 of 5 Photo 2: Test setup for radiated measurements (Enclosure, semi-anechoic chamber, 30 MHz to 1 GHz, intentional radiator §15) Test report Reference: MDE_LEICA_1201_FCC_Photo_Setups Page 4 of 5 Photo 3: Test setup for radiated measurements (Enclosure, fully-anechoic chamber, 1-18 GHz intentional radiator §15 / 30 MHz – 10/20 GHz §22/24/27) Test report Reference: MDE_LEICA_1201_FCC_Photo_Setups Page 5 of 5 Photo 4: Test setup for radiated measurements (Enclosure, fully-anechoic chamber, 18-25 GHz, intentional radiator § 15)