RKH-HS332ABluetooth Headset

1 332A Bluetooth headset user guide Bluetooth headset features 1) Talk Key & Headset indicator light - To accept/end call; blue/red colors indicating the status of the headset. 2, 3) Volume control button up and down - Adjust the speaker volume (2 dots volume up, one dot volume down) 4) Microphone - Voice input for outgoing audio. 5) Ear hook - Wear the headset on ear. 6) Ear hook –socket - (Back of the headset) Socket to connect the ear hook to headset 7) Speaker – (Back of the headset) Listen for incoming audio. 8) Charging port – (Back of the headset) Plug for charging the battery. Introduction This bluetooth headset is a light weight wireless system utilizing bluetooth wireless technology. The headset contains a microphone and a speaker; it’s for hands free communications with mobile phones. The power is provided by integral rechargeable battery. Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth technology version 1.1 and support the product and make sure that you: 1. Fully charge headset over night before you use it the first time. 2. Pair the headset with your Bluetooth phone or other devices before you start making calls. What's in the package? 1. One bluetooth headset. 2. One adaptor 3. One user guide 1 2 3 4 5 6 7 4 8 2 Choose right or left ear wearing style Headset can be worn on either ear by adjust the ear hook. Note: The ear hook can plug into the socket by either side of the headset. Please see below. Important: Please follow the below picture arrow angle to insert the ear hook, avoid vertical insert. Adjustable hook’s angle for your ear The angle of headset’s hook can be adjusted that to fit your ear. Note: The hook includes the function that the hook can be adjusted. You can use it to fix your ear. Please see below. Important: Please be careful when you are adjusting the hook’s angle. Do not force it too much which to avoid it getting any damages happened. Prepare to use your Bluetooth headset 1. Charging and battery time Before use your headset, you need to fully charge the battery. NOTE: When the headset is under charging, it stays on “OFF” mode. You’ll need to turn “ON” the headset to use after the charging. A. Connect the adaptor into an electrical outlet. B. Plug the adaptor's connector into charging port. C. While charging, the blue indicator light will stay solid on, when charging is completed, the light will be off. Then you can take the adaptor's connector out from the headset and disconnect the adaptor from the electrical outlet. D. Charging time is about 2.5-3 hours. When charging the headset please follow the arrow angle to insert the adaptor’s connector to headset, avoid vertical insert 2. Linking the headset to the phone (Pairing) Before you use your headset for the first time, you must pair the headset to a Bluetooth phone. The Bluetooth connection between the headset and your phone can be established by setting up a paired link. With a paired link, the phone remembers 3 the headset's ID, and process with future use. 3. Pairing the headset to the phone Before you can pair your headset you need to put it into pairing mode. Note: Pairing must be done every time while the headset establishes a link with a different Bluetooth phone. Pairing mode can only be entered from the power OFF state. During pairing, it is recommended that the headset and phone distance is as close as possible with no solid objects in between. To proceed pairing the headset with the bluetooth phone, please follow this guide: A. Check the mobile phone user guide, and then find out the locations of Bluetooth device discovery. B. Ensure headset is switched off. C. Press and hold the Talk button for about 3 seconds, blue LED blinking 5 times, keep pressing, then blue LED and red LED is cross blinking. This means the headset is in pairing mode. D. Perform a Bluetooth device discovery from the mobile phone. NOTE: It may take several seconds to establish connections. E. The phone's display will advise that it has found HUGES-HH303 and ask you to confirm that you want to pair with it. Confirm this. F. Enter the passkey 1234, when your phone menu prompts you, and the phone will start to pair the headset. G. Your phone screen will advise that pairing has been successful, and the blue indicator on your headset will flash once every 3 sec. when Bluetooth pairing has been established. If the pairing fails, the blue LED and red LED keep cross blinking and keep about 60 sec. then stop. A re-pairing procedure is needed. Please refer to above A. ~ G. NOTE: Your phone screen will also give the status. Once the headset and phone have successfully paired you are ready to place and receive calls. Turning your headset ON and OFF To switch your headset on, press and hold Talk button for about 3 seconds, the blue LED lights 5 times, release the button. The blue LED will be then blinking once every 3 seconds. This is standby mode which means the headset is awaiting a call. To switch your headset off, press and hold Talk button for 3 seconds until there are 5 times red LED blinking, release the button. Making a call with the headset There are different ways to make a call using your headset as the following description. NOTE: Make sure the headset and the cell phone are under link stage. For the examples of Ericsson and Nokia cell phones, the and symbols mean "link" status. For Nokia cell phone, it is necessary to press the talk button once to make the symbols on the cell phone when the headset is out of 10 meters, power off or after charging. If your bluetooth phone supports voice dialing, you can use this feature with the headset. Please refer to your phone's user guide for more information on voice control. Making a call from the mobile phone 1. Place the headset on your ear in the desired wearing style. 2. Using the phone's keypad, dial the phone number. 3. To send the call, press the phone's SEND/CALL key the phone initiates the all. 4. The call will then transfer a…

Text truncated - open the document above for the full version.

REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 2 EXTERNAL PHOTOGRPHS OF EUT REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA All of EUT 332A Front View of EUT REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA 332A Back View of EUT 307 Front View of EUT REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA 307 Back View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: HUGES HI-TECH INC. FCC ID: RKH-HS332A FCC ID: RKH-HS332A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA APPENDIX 3 INTERNAL PHOTOGRPHS OF EUT REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Open View of EUT Open View of EUT-1 REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Internal of EUT-1 Internal of EUT-2

REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 Page: 1 of 51 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT Product name: Bluetooth Headset Brand Name: N/A Model Name: 332A, 307 FCC ID: RKH-HS332A REPORT NO: EF/2004/40002 ISSUE DATE: Apr. 15, 2004 FCC Rule Part: 15.247 Prepared for HUGES HI-TECH INC. 7F, No. 188, Sec.2, Chung-Hsing Road, Hsin Tien City, Taipei Hsien, Taiwan, R.O.C. Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA VERIFICATION OF COMPLIANCE Applicant: HUGES HI-TECH INC. 7F, No. 188, Sec.2, Chung-Hsing Road, Hsin Tien City, Taipei Hsien, Taiwan, R.O.C. Equipment Under Test: Bluetooth Headset BRAND NAME: N/A FCC ID Number: RKH-HS332A MODEL No.: 332A, 307 Model Difference: The models are same except the different external File Number: EF/2004/40002 Date of test: Apr. 06, 2004 ~ Apr. 09, 2004 EUT Receive: Apr. 06, 2004 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (1992) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Apr. 15 2004 Alex Hsieh Approved By Date Apr. 15 2004 Vincent Su REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Table of Contents 1. GENERAL INFORMATION .........................................................................................................5 1.1 Product Description ............................................................................................................................5 1.2 Related Submittal(s) / Grant (s) ..........................................................................................................5 1.3 Test Methodology ...............................................................................................................................5 1.4 Test Facility.........................................................................................................................................5 1.5 Special Accessories .............................................................................................................................5 1.6 Equipment Modifications....................................................................................................................5 2. SYSTEM TEST CONFIGURATION ............................................................................................6 2.1 EUT Configuration .............................................................................................................................6 2.2 EUT Exercise ......................................................................................................................................6 2.3 Test Procedure.....................................................................................................................................6 2.4 Configuration of Tested System..........................................................................................................7 3. SUMMARY OF TEST RESULTS .................................................................................................8 4. DESCRIPTION OF TEST MODES ..............................................................................................8 5. CONDUCTED EMISSION TEST..................................................................................................9 5.1 Standard Applicable ............................................................................................................................9 5.2 EUT Setup...........................................................................................................................................9 5.3 Measurement Procedure......................................................................................................................9 5.4 Measurement Equipment Used: ........................................................................................................10 5.5 Measurement Result..........................................................................................................................10 6. PEAK OUTPUT POWER MEASUREMENT............................................................................13 6.1 Standar…

Text truncated - open the document above for the full version.

REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA APPENDIX 1 PHOTOGRPHS OF SET UP REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Radiated Emission Set up Photos REPORT NO: EF/2004/40002 ID: RKH-HS332A DATE: Apr. 15, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Conducted Emission Set Up Photos