RNT-PTD300USWireless Weather Station

 Wireless Temperature Station PTD 300 US OPERATING INSTRUCTIONS  These operating instructions belong with this product. They contain important information for putting it into service and operating it. This should be noted also when this product is passed on to a third party. Therefore look after these operating instructions for future reference! Table of Contents: 1. Introduction .................................................................................4 1.1. Intended use ................................................................................4 2. Scope of delivery .........................................................................5 3. Terminology .................................................................................5 4. Features and functions ................................................................6 4.1. Displaying the indoor temperature and air humidity....................6 4.2. Displaying of one of a maximum of 9 outdoor sensors (temperature/air humidity)............................................................6 4.3. Frost warning ...............................................................................6 4.4. Temperature alarm .......................................................................6 5. Safety instructions .......................................................................7 6. Battery and environment instructions ..........................................8 7. Preparation for operation, commissioning ..................................8 7.1. Commissioning the base station .................................................9 8. Controls and indicators .............................................................10 9. Operation ...................................................................................12 9.1. Key functions .............................................................................12 9.2. Selecting of the sensors to display ...........................................12 9.2.1. Display panel A - pool sensor ....................................................12 9.2.2. Display panel B - indoor or outdoor sensor ..............................13 In this manual mentioned sensors are not included in delivery. For the installation, addressing and commissioning of this sen- sors, please refer to the operating instructions supplied with the unit.  9.3. Displaying MIN/MAX values ......................................................14 9.4. Selecting temperature metered value (Temp./Dewpoint) ..........15 9.5. Frost warning .............................................................................15 9.6. Activating the temperature alarm ..............................................16 9.7. Switch off audio warning during alarm ......................................16 10. Configuration .............................................................................17 10.1. Selecting temperature unit ........................................................17 10.2. Setting the temperature alarm values .......................................17 10.3. Enable/Disable the audio warning .............................................20 10.4. Setting the comfort temperature range of display panel A .......21 11. Other functions and settings ....................................................23 11.1. Commissioning of new sensors ................................................23 11.2. Reset to factory settings............................................................23 11.3. Receiving indicator ....................................................................23 11.4. Frost warning .............................................................................24 12. Changing batteries ....................................................................24 12.1. Base station ...............................................................................24 12.2. Combination sensor, outdoor sensors, pool sensor ..................24 13. Troubleshooting .........................................................................25 14. Range ........................................................................................27 15. Maintenance and cleaning.........................................................28 15.1. General ......................................................................................28 15.2. Cleaning base station ................................................................28 16. Handling ....................................................................................29 16.1. General ......................................................................................29 16.2. Base station ...............................................................................29 17. Terminology ...............................................................................30 17.1. Comfort indicator ......................................................................30 17.2. Dewpoint ...................................................................................30 18. Disposal .....................................................................................31 18.1. General ......................................................................................31 19. Specifications ............................................................................31 20. FCC-Information ........................................................................32  1. Introduction Dear Customer, Thank you for purchasing this product. The product has been EMC-tested and thus meets the requirements of the valid national guidelines. See also FCC-Information. In order to maintain this condition and ensure safe operation, you, as the user, have to observe this operating manual. Prior to using the product for the first time, please read the entire operating manual and observe all operating and safety instructions. We should already like to point out now the correct order for commissioning the products. Plea…

Text truncated - open the document above for the full version.

REGISTRATION NUMBER: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN PAGE 1 of 10 Appendix A. Pictures REGISTRATION NUMBER: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN PAGE 2 of 10

eQ-3 Limited, Hong Kong 01 December 2006 File Name: eq-3_ptd300us_labelsmpl.doc Page : 1 / 2 FCC ID Label Sample Wireless Weather Station eQ-3 PTD 300US eQ-3 Limited, Hong Kong 01 December 2006 File Name: eq-3_ptd300us_labelsmpl.doc Page : 2 / 2

eQ-3 Limited, Hong Kong 31 January 2007 File Name: eq-3_ptd300us_labelloc.doc Page : 1 / 1 FCC ID Label Location Information Wireless Weather Station eQ-3 PTD 300US

ETS PRODUCT SERVICE AG TEST - REPORT FCC RULES PART 15 / SUBPART B FCC ID: RNT-PTD300US Test report no.: G0M20611-1016-C-1 Certificate 1983-01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 660 Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 1 of 26 TABLE OF CONTENTS 1.1 Notes 2 1.2 Tester 4 1.3 Testing laboratory 5 1.3.1 Location 5 1.3.2 Details of accreditation status 5 1.3.3 Test location, where different 5 1.4 Details of applicant 6 1.5 Application details 6 1.6 Test item 6 1.6.1 Description of test item 6 1.6.2 Manufacturer (if different from applicant in point 1.4) 7 1.6.3 Frequency behavior 7 1.7 Test standards 7 2 Technical test 8 2.1 Summary of test results 8 2.2 Test environment 8 2.3 Test equipment utilized 9 2.4 Test results 19 2.4.1 Conducted Emission 20 2.4.2 Spurious Emission 22 2.5 Test protocols 23 3 Normative references 26 Annex: Pictures and diagrams Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 2 of 26 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The tests were carried out and passed in accordance to the standards: FCC part 15 : January 2005 The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification (only telecommunication products). Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that its performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.6. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 3 of 26 Important Notes: Proper labeling is required for each device. Devices shall be labeled in accordance with labeling requirements pursuant to section 15.19 and section 2.1074 of the FCC rules. Devices subject to a Declaration of Conformity shall be uniquely identified by the responsible party. This identification shall not be of a format which could be confused with the FCC Identifier required on certified, notified type accepted or type approved equipment. The responsible party shall maintain adequate identification records to facilitate positive identification for each device. The user manual or instruction manual shall included also a warning statement that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Reference Section 15.21 Furthermore information to the user regarding to the interference potential of the device and about simple measures that can be taken to correct interference is required. Reference Section 15.105 The responsible party must warrant that each unit of equipment marketed under a Declaration of Conformity is identical to the unit tested and found acceptable with the standards and that the records maintained by the responsible party continue to reflect the equipment being produced under the Declaration of Conformity within the variation that can be expected due to quantity production and testing on a statistical basis. Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 4 of 26 1.2 Tester 13.12.2006 Tester ___________________________________________________________________ Date ETS-Lab. Name Signature Technical responsibility for area of testing: 13.12.2006 N. Kaspar ____________________________________________________________________ Date ETS Name Signature Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 5 of 26 1.3 Testing laboratory 1.3.1 Location ETS PRODUCT SERVICE AG Storkower Strasse 38c D- 15526 Reichenwalde Germany Telephone : + 49 33631 888 00 Telefax : + 49 33631 888 660 1.3.2 Details of accreditation status ACCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 ACCREDITED COMPETENT BODY BNetzA -REGISTRATION NUMBER: BNetzA-zS-026/96 FCC FILED TEST LABORATORY: REG. NO. 96970 INDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED CERTIFICATE NUMBER: 1983-01 BLUETOOTH QUALIFICATION TEST FACILITY (BQTF) ACCREDITED BY: BLUETOOTH QUALIFICATION REVIEW BOARD (BQRF) 1.3.3 Test location, where different Name : ./. Street : ./. Town : ./. Country : ./. Telephone : ./. Fax : ./. Teletex : ./. Registration number: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STRASSE 38C D-15526 REICHENWALDE B. BERLIN Page 6 of 26 1.4 Details of applicant Name : eQ-3 Limited Street : Room A8 & A10, 16/F Kailey Industrial Centre, No.12, Fung Yip Street Town : Chaiwan Country : Hong Kong Telephone : +852 23670322 Fax : +852 23670322 Teletex : ./. Contact : Mrs. Shirley Hui Lai Chu Telephone : +852 23670322 1.5 Application details Date of receipt of application : 23.11.2006 Date of receipt of test item : 23.11.2006 Date of test : 30.11.2006 - 01.12.2006 1.6 Test item 1.6.1 Description of test item Type of product : Wireless Weather Station - Indoor Unit (Receiver) Type identification : PTD 300US Trade Name : Brand name: eQ-3 Serial number : without Photos : Please find in Appendix. Power supply :…

Text truncated - open the document above for the full version.

REGISTRATION NUMBER: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN PAGE 9 of 10 REGISTRATION NUMBER: G0M20611-1016-C-1 ETS PRODUCT SERVICE AG STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN PAGE 10 of 10