RYK-WMIA199NWireless 11a/b/g/n Mini PCI module

WMIA-199N Product Specification 1 The QIG for Wireless 11a/b/g/n Mini PCI Module WMIA-199N Product Specification Product Description Draft IEEE 802.11n compliant 2.4GHz & 5GHz WLAN Mini-PCI Module Lead-Free RoHs compliant Host Interface 32-bit miniPCI, Type III A Operating Voltage DC 3.3V ± 5% Chipset Mac/BB Process AR9160 RF Chip AR9106 Power Consumption 11b TX: ≦ 600mA RX: ≦ 600mA 11g/n TX: ≦ 600mA RX: ≦ 600mA 11a/n TX: ≦ 600mA RX: ≦ 600mA Radio Antenna 3 U.FL-R-SMT connectors (2T/2R) IEEE 802.11b 18dBm (one IEEE 802.11g 17dBm (one 5150-5250 12dBm (one antenna) *limit* IEEE 802.11a 5725-5850 21dBm (one antenna) HT20 20dBm (two antenna) IEEE 802.11gn HT40 16dBm (two antenna) HT20 5150-5250 12dBm (two antenna) *limit* 5725-5850 21dBm (two antenna) HT405150-525012dBm (two antenna) *limit* Output Power @ 25°C IEEE 802.11an 5725-5850 21dBm (two antenna) Sensitivity IEEE 802.11b 11Mbps ≦ -80dbm IEEE 802.11a/g 54Mbps ≦ -65dbm IEEE 802.11n 2.4GHz & 5GHz HT20 ≦ -64dbm HT40 IEEE 802.11b (DSSS) φ 5.5/11 Mbps (CCK) φ 2 Mbps (DQPSK) φ 1 Mbps (DBPSK) Modulation IEEE 802.11a/g (OFDM/DSSS) φ 48/54 Mbps (QAM-64) φ 24/36 Mbps (QAM-16) φ 12/18 Mbps (QPSK) φ 6/9 Mbps (BPSK) WMIA-199N Product Specification 2 IEEE 802.11n (OFDM/DSSS) φ QAM-64 φ QAM-16 φ QPSK φ BPSK IEEE 802.11a ISM Band φ USA(FCC): 5.15GHz ~ 5.25 GHz ; 5.725Hz ~ 5.850 GHz; φ Europe(ETSI): 5.15 GHz ~ 5.25 GHz φ Japan(TELEC) : 5.15 GHz ~ 5.35 GHz ; 5.47GHz ~ 5.725GHz IEEE 802.11b/g ISM Band φ USA(FCC): 2.412GHz ~ 2.462 GHz (CH1 ~ CH11) φ Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) φ Japan(TELEC) : 2.412 GHz ~ 2..472 GHz (CH1 ~ CH13) Operating Frequency IEEE 802.11gn 40MHz Band φ USA(FCC): 2.422GHz ~ 2.452 GHz φ Europe(ETSI): 2.422 GHz ~ 2.462 GHz φ Japan(TELEC) : 2.422 GHz ~ 2.462 GHz IEEE 802.11an 40MHz Band φ USA(FCC): 5.15GHz ~ 5.25 GHz ; 5.725Hz ~ 5.850 GHz; φ Europe(ETSI): 5.15 GHz ~ 5.25 GHz φ Japan(TELEC) : 5.15 GHz ~ 5.35 GHz ; 5.47GHz ~ 5.725GHz Software Specification Supported OS No NDIS driver Security No NDIS driver Physical Specification Dimension 59.6mm(L)*50.9mm(W)*3.25mm(H) Weight ≦ 50 g Environment Specification Temperature (Ambient) Humidity (non-condensing) Operating 0 ~ 55 °C 80% Storage -20 ~ 80 °C 5 ~ 90% Warranty 12 months WMIA-199N Product Specification 6 Federal Communication Commission and Industry Canada Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC & IC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: „ Reorient or relocate the receiving antenna. „ Increase the separation between the equipment and receiver. „ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. „ Consult the dealer or an experienced radio/TV technician for help. „ FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC & IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC & IC Radiation Exposure Statement: This equipment complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, Vehicle interface Integrated Communication Optical Module (ICOM)..., etc.). WMIA-199N Product Specification 7 IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC / IC authorization is no longer considered valid and the FCC / IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maint…

Text truncated - open the document above for the full version.

FCC ID: RYK-WMIA199N Report No.: RF970312L01 Modular Approval Request Letter Advance Data Technology Apr. 08, 2008 Dear Application Examiner, SparkLAN Communications, Inc., It’s Wireless 11a/b/g/n Mini PCI module, FCC ID: RYK-WMIA199N would like to have your authorization as a modular approval specific to the mobile device such as Vehicle interface Integrated Communication Optical Module (ICOM)..., etc. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs.It is integrated in chip AR9160. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is RT8020. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a PCMCIA to mini-PCI extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” FCC ID: RYK-WMIA199N Report No.: RF970312L01 The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Gary Chang Assistant Manager Advance Data Technology

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4

FCC ID: RYK-WMIA199N Report No.: RF970312L01 Operational Description This device is a Wireless 11a/b/g/n Mini PCI module, which operates in the 2.4GHz/5GHz frequency spectrum with throughput of up to 54Mbps (or 300Mbps with draft 802.11n) which OFDM technique will be applied. If the signal to noise ratio is too poor which could not support 54Mbps (or 300Mbps with draft 802.11n), the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by host equipment. The antenna is PCB antenna with U.FL-R-SMT antenna connector. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted. For more detailed instruction, please take a look at the user’s manual.

FCC ID: RYK-WMIA199N Report No: SA970312L01 1 RF EXPOSURE REPORT REPORT NO.: SA970312L01 MODEL NO.:WMIA-199N ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: SparkLAN Communications, Inc. ADDRESS: 3Fl., No. 246, Sec. 1, Neihu Road., Neihu Chiu, Taipei Taiwan 114, R.O.C ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No.47, 14 th Ling, Chia Pau Tsuen, Linko Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. FCC ID: RYK-WMIA199N Report No: SA970312L01 2 RF EXPOSURE MEASUREMENT (MOBILE DEVICE) 1. INTRODUCTION In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF EXPOSURE LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) (A)LIMITS FOR OCCUPATIONAL / CONTROL EXPOSURES 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B)LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz FCC ID: RYK-WMIA199N Report No: SA970312L01 3 3. FRIIS FORMULA Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance r. Ref.: David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT OPERATING CONDITION The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device. FCC ID: RYK-WMIA199N Report No: SA970312L01 4 6. TEST RESULTS 6.1 ANTENNA GAIN The maximum Gain measured in Fully Anechoic Chamber is 2.3dBi or 1.678(numeric)(for 2.4GHz); 4.6dBi or 2.884(numeric)(for 5.0GHz). 6.2 OUTPUT POWER INTO ANTENNA & RF EXPOSURE VALUE AT DISTANCE 20cm: For 2.400 ~ 2.4385GHz band: 802.11b DSSS MODULATION: CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 1 2412 63.387 18.02 0.021 1.000 6 2437 63.387 18.02 0.021 1.000 11 2462 63.096 18.00 0.021 1.000 802.11g OFDM MODULATION: CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 1 2412 50.582 17.04 0.017 1.000 6 2437 50.350 17.02 0.017 1.000 11 2462 50.699 17.05 0.017 1.000 DRAFT 802.11n (20MHz) OFDM MODULATION: PEAK POWER OUTPUT (dBm) CHAN. CHAN. FREQ. (MHz) CHAIN 0 CHAIN 1 TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 1 2412 17.09 17.56 108.185 20.34 0.037 1.000 6 2437 17.04 17.53 107.206 20.30 0.036 1.000 11 2462 14.51 14.54 56.693 17.54 0.019 1.000 FCC ID: RYK-WMIA199N Report No: SA970312L01 5 DRAFT 802.11n (40MHz) OFDM MODULATION: PEAK POWER OUTPUT (dBm) CHAN. CHAN. FREQ. (MHz) CHAIN 0 CHAIN 1 TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 1 2422 13.09 13.54 42.965 16.33 0.015 1.000 4 2437 13.03 13.08 40.414 16.07 0.014 1.000 7 2452 12.00 12.56 33.879 15.30 0.011 1.000 For 5.150 ~ 5.250GHz band: 802.11a OFDM MODULATION: CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 36 5180 15.959 12.03 0.009 1.000 40 5200 16.106 12.07 0.009 1.000 48 5240 15.922 12.02 0.009 1.000 DRAFT 802.11n (20MHz) OFDM MODULATION: PEAK POWER OUTPUT (dBm) CHAN. CHAN. FREQ. (MHz) CHAIN 0 CHAIN 1 TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 36 5180 9.55 8.59 16.243 12.11 0.009 1.000 40 5200 9.58 8.51 16.174 12.09 0.009 1.000 48 5240 9.55 9.09 17.125 12.34 0.010 1.000 DRAFT 802.11n (40MHz) OFDM MODULATION: PEAK POWER OUTPUT (dBm) CHAN. CHAN. FREQ. (MHz) CHAIN 0 CHAIN 1 TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 38 5190 9.53 8.52 16.086 12.06 0.009 1.000 46 5230 9.59 9.04 17.116 12.33 0.010 1.000 FCC ID: RYK-WMIA199N Report No: SA970312L01 6 For 5.725 ~ 5.850GHz band: 802.11a OFDM MODULATION: CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) POWER DENSITY (mW/CM 2 ) LIMIT OF POWER DENSITY (mW/CM 2 ) 149 5745 128.233 21.08 0.074 1.000 157 5785 126.765 21.03 0.073 1.000 165 5825 127.057 21.04 0.073 1.000 DRAFT 802.11n (20MHz) OFDM MODULATION: PEAK POWER OUTPUT (dBm) CHAN. CHAN. FREQ. (MHz) CHAIN 0 CHAIN 1 TOTAL PEAK POWER (mW)…

Text truncated - open the document above for the full version.

Report No.: RF970312L01 1 Report Format Version 2.1.0 FCC TEST REPORT (15.247) REPORT NO.: RF970312L01 MODEL NO.: WMIA-199N RECEIVED: Mar. 12, 2008 TESTED: Mar. 14 ~ Mar. 25, 2008 ISSUED: Apr. 01, 2008 APPLICANT: SparkLAN Communications, Inc. ADDRESS: 3Fl., No. 246, Sec. 1, Neihu Road., Neihu Chiu, Taipei Taiwan 114, R.O.C ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No.47, 14 th Ling, Chia Pau Tsuen, Linko Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 148 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF970312L01 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 14 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 14 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND)................................................. 15 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 15 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 15 4.1.2 TEST INSTRUMENTS................................................................................................ 16 4.1.3 TEST PROCEDURES ................................................................................................ 17 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 17 4.1.5 TEST SETUP.............................................................................................................. 18 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 18 4.1.7 TEST RESULTS ......................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 32 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 32 4.2.2 TEST INSTRUMENTS................................................................................................ 32 4.2.3 TEST PROCEDURES ................................................................................................ 33 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 33 4.2.5 TEST SETUP.............................................................................................................. 34 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 34 4.2.7 TEST RESULTS ......................................................................................................... 35 4.3 6dB BANDWIDTH MEASUREMENT.......................................................................... 37 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................... 37 4.3.2 TEST INSTRUMENTS................................................................................................ 37 4.3.3 TEST PROCEDURE................................................................................................... 37 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 37 4.3.5 TEST SETUP.............................................................................................................. 38 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 38 4.3.7 TEST RESULTS ......................................................................................................... 39 4.4 MAXIMUM PEAK OUTPUT POWER.......................................................................... 51 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT .......................... 51 4.4.2 INSTRUMENTS .......................................................................................................... 51 4.4.3 TEST PROCEDURES ................................................................................................ 51 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 52 4.4.5 TEST SETUP.............................................................................................................. 52 4.4.6 EUT OPERATING CONDITIONS ............................................................................... 52 4.4.7 TEST RESULTS ......................................................................................................... 53 Report No.: RF970312L01 3 Report Format Version 2.1.0 4.5 POWER SPECTRAL DENSITY MEASUREMENT …

Text truncated - open the document above for the full version.

Report No.: RF970312L01-1 1 Report Format Version 2.1.0 FCC TEST REPORT (15.407) REPORT NO.: RF970312L01-1 MODEL NO.: WMIA-199N RECEIVED: Mar. 12, 2008 TESTED: Mar. 14 ~ Mar. 25, 2008 ISSUED: Apr. 01, 2008 APPLICANT: SparkLAN Communications, Inc. ADDRESS: 3Fl., No. 246, Sec. 1, Neihu Road., Neihu Chiu, Taipei Taiwan 114, R.O.C ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No.47, 14 th Ling, Chia Pau Tsuen, Linko Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 92 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF970312L01-1 2 Report Format Version 2.1.0 TABLE OF CONTENTS 1. CERTIFICATION.........................................................................................................4 2. SUMMARY OF TEST RESULTS ................................................................................5 2.1 MEASUREMENT UNCERTAINTY..............................................................................5 3. GENERAL INFORMATION .........................................................................................6 3.1 GENERAL DESCRIPTION OF EUT ...........................................................................6 3.2 DESCRIPTION OF TEST MODES .............................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ..................................................................... 11 4. TEST TYPES AND RESULTS ..................................................................................12 4.1 RADIATED EMISSION MEASUREMENT ................................................................12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ..............................................12 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ............12 4.1.3 TEST INSTRUMENTS..............................................................................................13 4.1.4 TEST PROCEDURES ..............................................................................................14 4.1.5 DEVIATION FROM TEST STANDARD.....................................................................14 4.1.6 TEST SETUP............................................................................................................15 4.1.7 EUT OPERATING CONDITION................................................................................15 4.1.8 TEST RESULTS .......................................................................................................16 4.2 CONDUCTED EMISSION MEASUREMENT ...........................................................25 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.........................................25 4.2.2 TEST INSTRUMENTS..............................................................................................25 4.2.3 TEST PROCEDURES ..............................................................................................26 4.2.4 DEVIATION FROM TEST STANDARD.....................................................................26 4.2.5 TEST SETUP............................................................................................................27 4.2.6 EUT OPERATING CONDITIONS .............................................................................27 4.2.7 TEST RESULTS .......................................................................................................28 4.3 PEAK TRANSMIT POWER MEASUREMENT .........................................................30 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT .......................................30 4.3.2 TEST INSTRUMENTS..............................................................................................30 4.3.3 TEST PROCEDURE.................................................................................................30 4.3.4 DEVIATION FROM TEST STANDARD.....................................................................31 4.3.5 TEST SETUP............................................................................................................31 4.3.6 EUT OPERATING CONDITIONS .............................................................................31 4.3.7 TEST RESULTS .......................................................................................................32 4.4 PEAK POWER EXCURSION MEASUREMENT ......................................................50 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT....................................50 4.4.2 TEST INSTRUMENTS..............................................................................................50 4.4.3 TEST PROCEDURE.................................................................................................50 4.4.4 DEVIATION FROM TEST STANDARD.....................................................................51 4.4.5 TEST SETUP............................................................................................................51 4.4.6 EUT OPERATING CONDITIONS .............................................................................51 4.4.7 TEST RESULTS .......................................................................................................52 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT ........................................61 4.5.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4