RYK-WUBR508N802.11abgn USB Module

WiFi Network card Quick Installiaton Guide Version 1.0 1 Contents 1. Package Contents ........................................................................................................... 3 2. WiFi Network Card Installation ........................................................................................ 4 3. Connect to Wireless Access Point .................................................................................. 8 2 Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. April 2012 3 1. Package Contents Before you starting to use this WiFi network card, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: Package Contents Please make sure you have the following in the box:  WiFi network card  CDROM Note: if anything is missing, please contact your vendor 4 2. WiFi Network Card Installation 1. Insert the WiFi network card into an empty USB 2.0 port of your platform. 2. If he following message appear on your computer, click ‘Cancel’. 3. Insert the Driver CD then wait for the Autorun prompt. 5 4. If Autorun does not work, please browse the CD content and double click the “Setup.exe”. 5. Click “Next” and then follow the instructions on the screen to continue the installation. 6 7 6. When you see this message, please click “Finish” to complete the driver installation process. 8 3. Connect to Wireless Access Point 1. After installation is complete, a small Ralink icon appears in the notifications area of the taskbar. You can double click it to maximize the RaUI dialog box. 2. When starting RaUI, the system will connect to the AP with best signal strength without setting a profile or matching a profile setting. When starting RaUI, it will issue a scan command to a WiFi network card. After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list includes most used fields, such as SSID, network type, channel used, wireless mode, security status and the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is shown below. You could click the two buttons which red arrow pointed to open the “Site Survey” and “Link Information” page to show detail information. 9 3. You could follow the steps to connect to the AP which you want to connect (Example to Configure Connection with WPA2-PSK). a. Select the AP and click “Connect” icon . b. Authentication/Encryption function appears. 10 c. Select WPA2-PSK as the Authentication Type. Select TKIP or AES encryption. Enter the WPA Pre-Shared Key. d. Click "OK". Be careful, if the WPA Pre-Shared Key entered is not correct, you won’t be able to exchange any data frames, even though the AP can be connected. 11 4. At last, if you want to know more using method of RaUI, you could refer to the help file by click the question mark at the top right corner of RaUI to open it. 12 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RYK-WUBR508N ". Antenna information Ant. No. PL Ant. Port [Ant No. X connect to Ant. Port Y] Ant. Cat. Ant. Type BrandModel G ANT (dBi) DG (dBi) [correlated] N TX = 1 DG (dBi) [uncorrelated] N TX = 2 1 1 1 External Dipole Lct FDE_ACBSMA-BGP3.67 N/A 3.7 1 2 External Dipole Lct FDE_ACBSMA-BGP3.67 2 1 1 External Dipole Lct FDE_ACBSMA-BGP5.97 N/A 6.0 1 2 External Dipole Lct FDE_ACBSMA-BGP5.97 3 1 1 Internal Printed SparkLANWUBR-508N 3.79 N/A 3.8 1 2 Internal Printed SparkLANWUBR-508N 3.79 4 1 1 Internal Printed SparkLANWUBR-508N 6.64 N/A 6.64 1 2 Internal Printed SparkLANWUBR-508N 6.64

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C1 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 APPENDIX C. Photographs of EUT Ipex+USB FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C2 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C3 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C4 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C5 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C6 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C7 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C8 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 Ipex+4pin pin-header FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C9 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C10 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C11 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 Ipex+4pin wafer con FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C12 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C13 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C14 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C1 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 APPENDIX C. Photographs of EUT Printed Ant. +USB FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C2 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C3 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C4 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 Printed Ant. +4pin pin-header FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C5 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C6 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C7 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C8 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 Printed Ant. +4pin wafer con FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C9 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C10 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C11 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C1 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 APPENDIX C. Photographs of EUT Ipex+USB FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C2 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C3 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C4 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C5 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C6 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C7 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C8 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 Ipex+4pin pin-header FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C9 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C10 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C11 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 Ipex+4pin wafer con FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C12 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C13 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C14 OF C14 TEL : 886-3-327-3456 ISSUED DATE : May 11, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C1 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 APPENDIX C. Photographs of EUT Printed Ant. +USB FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C2 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C3 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C4 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 Printed Ant. +4pin pin-header FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C5 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C6 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C7 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C8 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 Printed Ant. +4pin wafer con FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C9 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C10 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C11 OF C11 TEL : 886-3-327-3456 ISSUED DATE : May 15, 2012 FAX : 886-3-327-0973

Page No. : A1 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC Appendix A. RF Exposure Evaluation Page No. : A2 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC 1.3. Calculated Result and Limit Antenna Type : Dipole Antenna For Single Chain: Max Conducted Power for IEEE 802.11b/g: 24.31dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2412 20 3.672.32809124.31 269.7739 0.1250 For Two Chain: Max Conducted Power for IEEE 802.11n: 24.46dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2412 20 3.672.32809124.46 279.2544 0.1294

Page No. : A1 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI Appendix A. RF Exposure Evaluation Page No. : A2 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI 1.3. Calculated Result and Limit Antenna Type : Dipole Antenna For Single Chain: Max Conducted Power for IEEE 802.11a: 20.29dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 5745 20 5.973.95366620.29 106.9055 0.0841 For Two Chain: Max Conducted Power for IEEE 802.11n: 24.32dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 5745 20 5.973.95366624.32 270.3958 0.2128

Page No. : A1 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC Appendix A. RF Exposure Evaluation Page No. : A2 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC 1.3. Calculated Result and Limit Antenna Type : Printed Antenna For Single Chain: Max Conducted Power for IEEE 802.11b/g: 24.31dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2412 20 3.792.39331624.31269.7739 0.1285 For Two Chain: Max Conducted Power for IEEE 802.11n: 24.46dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2412 20 3.792.39331624.46279.2544 0.1330

Page No. : A1 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI Appendix A. RF Exposure Evaluation Page No. : A2 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AI 1.3. Calculated Result and Limit Antenna Type : Printed Antenna For Single Chain: Max Conducted Power for IEEE 802.11a: 20.29dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 5745 20 6.64 4.613176 20.29 106.9055 0.0982 For Two Chain: Max Conducted Power for IEEE 802.11n: 24.32dBm Test Frequency (MHz) Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 5745 20 6.64 4.613176 24.32 270.3958 0.2483

SPORTON International Inc. Report Format Version: a FCC TEST REPORT Report No. : FR232843AC FCC RADIO TEST REPORT According to 47 CFR FCC Part 15 Subpart C § 15.247 Equipment : 802.11abgn, USB module Brand Name : SparkLAN Model No. : WUBR-508N Filing Type : New Application Applicant Manufacturer : SparkLAN Communications, Inc. 8F., No. 257, Sec. 2, Tiding Blvd., Neihu District, Taipei City 11493, Taiwan FCC ID : RYK-WUBR508N Received Date : Mar. 29, 2012 Final Test Date : May 04, 2012 Statement Test result included in this report is only for dipole antenna (802.11b/g/n) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON International Inc. Page No. : i of ii TEL : 886-3-327-3456 Issued Date : May 11, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N FCC TEST REPORT Report No. : FR232843AC Table of Contents 1 SUMMARY OF THE TEST RESULT ....................................................................................................................... 2 2 GENERAL INFORMATION ...................................................................................................................................... 3 2.1 Product Details .........................................................................................................................................................................................3 2.2 Table for Filed Antenna ............................................................................................................................................................................4 2.3 Table for Carrier Frequencies ..................................................................................................................................................................5 2.4 Table for Test Modes ...............................................................................................................................................................................5 2.5 Table for Testing Locations ......................................................................................................................................................................5 2.6 Table for Supporting Units .......................................................................................................................................................................6 2.7 Table for Parameters of Test Software Setting ........................................................................................................................................6 2.8 EUT Operation during Test ......................................................................................................................................................................7 2.9 Test Configuration ....................................................................................................................................................................................8 3 TEST RESULT ....................................................................................................................................................... 11 3.1 AC Power Line Conducted Emissions Measurement ............................................................................................................................11 3.2 Maximum Peak Output Power Measurement ........................................................................................................................................15 3.3 Power Spectral Density Measurement ...................................................................................................................................................18 3.4 6dB Spectrum Bandwidth Measurement ...............................................................................................................................................33 3.5 Radiated Emissions Measurement ........................................................................................................................................................60 3.6 Band Edge and Fundamental Emissions Measurement ........................................................................................................................90 3.7 Antenna Requirements ........................................................................................................................................................................101 4 LIST OF MEASURING EQUIPMENTS ................................................................................................................ 102 5 TEST LOCATION ................................................................................................................................................. 104 6 TAF CERTIFICATE OF ACCREDITATION ......................................................................................................... 105 APPENDIX A. RF EXPOSURE EVALUATION ........................................................................................................ A3 APPENDIX B. TEST PHOTOS ................................................................................................................................. B7 APPENDIX C. PHOTOGRAPHS OF EUT .............................................................................................................. C14 SPORTON International Inc. Page No. : ii of ii TEL : 886-3-327-3456 Issued Date : May 11, 2012 FAX : 886-3-327-0973 FCC ID :…

Text truncated - open the document above for the full version.

SPORTON International Inc. Report Format Version: a FCC TEST REPORT Report No. : FR232843AC FCC RADIO TEST REPORT According to 47 CFR FCC Part 15 Subpart C § 15.247 Equipment : 802.11abgn, USB module Brand Name : SparkLAN Model No. : WUBR-508N Filing Type : New Application Applicant Manufacturer : SparkLAN Communications, Inc. 8F., No. 257, Sec. 2, Tiding Blvd., Neihu District, Taipei City 11493, Taiwan FCC ID : RYK-WUBR508N Received Date : Mar. 29, 2012 Final Test Date : May 14, 2012 Statement Test result included in this report is only for printed antenna (802.11b/g/n) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON Inter…

Text truncated - open the document above for the full version.