RYK-WUBR508N-D802.11abgn USB Dongle

WiFi Network card Quick Installiaton Guide Version 1.0 1 Contents 1. Package Contents ........................................................................................................... 3 2. WiFi Network Card Installation ........................................................................................ 4 3. Connect to Wireless Access Point .................................................................................. 9 2 Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. April 2012 3 1. Package Contents Before you starting to use this WiFi network card, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: Package Contents Please make sure you have the following in the box:  WiFi network card  CDROM Note: if anything is missing, please contact your vendor 4 2. WiFi Network Card Installation 1. Insert the WiFi network card into an empty USB 2.0 port of your computer. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again. 5 2. If he following message appear on your computer, click ‘Cancel’. 3. Insert the Driver CD then wait for the Autorun prompt. 6 4. If Autorun does not work, please browse the CD content and double click the “Setup.exe”. 5. Click “Next” and then follow the instructions on the screen to continue the installation. 7 8 6. When you see this message, please click “Finish” to complete the driver installation process. 9 3. Connect to Wireless Access Point 1. After installation is complete, a small Ralink icon appears in the notifications area of the taskbar. You can double click it to maximize the RaUI dialog box. 2. When starting RaUI, the system will connect to the AP with best signal strength without setting a profile or matching a profile setting. When starting RaUI, it will issue a scan command to a WiFi network card. After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list includes most used fields, such as SSID, network type, channel used, wireless mode, security status and the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is shown below. You could click the two buttons which red arrow pointed to open the “Site Survey” and “Link Information” page to show detail information. 10 3. You could follow the steps to connect to the AP which you want to connect (Example to Configure Connection with WPA2-PSK). a. Select the AP and click “Connect” icon . b. Authentication/Encryption function appears. 11 c. Select WPA2-PSK as the Authentication Type. Select TKIP or AES encryption. Enter the WPA Pre-Shared Key. d. Click "OK". Be careful, if the WPA Pre-Shared Key entered is not correct, you won’t be able to exchange any data frames, even though the AP can be connected. 12 4. At last, if you want to know more using method of RaUI, you could refer to the help file by click the question mark at the top right corner of RaUI to open it. 13 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.

WiFi Network card Quick Installiaton Guide Version 1.0 1 Contents 1. Package Contents ........................................................................................................... 3 2. WiFi Network Card Installation ........................................................................................ 4 3. Connect to Wireless Access Point .................................................................................. 9 2 Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. April 2012 3 1. Package Contents Before you starting to use this WiFi network card, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items: Package Contents Please make sure you have the following in the box:  WiFi network card  CDROM Note: if anything is missing, please contact your vendor 4 2. WiFi Network Card Installation 1. Insert the WiFi network card into an empty USB 2.0 port of your computer. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again. 5 2. If he following message appear on your computer, click ‘Cancel’. 3. Insert the Driver CD then wait for the Autorun prompt. 6 4. If Autorun does not work, please browse the CD content and double click the “Setup.exe”. 5. Click “Next” and then follow the instructions on the screen to continue the installation. 7 8 6. When you see this message, please click “Finish” to complete the driver installation process. 9 3. Connect to Wireless Access Point 1. After installation is complete, a small Ralink icon appears in the notifications area of the taskbar. You can double click it to maximize the RaUI dialog box. 2. When starting RaUI, the system will connect to the AP with best signal strength without setting a profile or matching a profile setting. When starting RaUI, it will issue a scan command to a WiFi network card. After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list includes most used fields, such as SSID, network type, channel used, wireless mode, security status and the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is shown below. You could click the two buttons which red arrow pointed to open the “Site Survey” and “Link Information” page to show detail information. 10 3. You could follow the steps to connect to the AP which you want to connect (Example to Configure Connection with WPA2-PSK). a. Select the AP and click “Connect” icon . b. Authentication/Encryption function appears. 11 c. Select WPA2-PSK as the Authentication Type. Select TKIP or AES encryption. Enter the WPA Pre-Shared Key. d. Click "OK". Be careful, if the WPA Pre-Shared Key entered is not correct, you won’t be able to exchange any data frames, even though the AP can be connected. 12 4. At last, if you want to know more using method of RaUI, you could refer to the help file by click the question mark at the top right corner of RaUI to open it. 13 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body.

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B1 OF B2 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973 APPENDIX B. Photographs of EUT FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B2 OF B2 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B1 OF B4 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973 APPENDIX B. Photographs of EUT FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B2 OF B4 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B3 OF B4 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B4 OF B4 TEL : 886-3-327-3456 ISSUED DATE : May 17, 2012 FAX : 886-3-327-0973

SPORTON INTERNATIONAL INC. Page Number : 1 of 37 TEL : 886-3-327-3456 Report Issued Date : May 29, 2012 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : RYK-WUBR508N-D FCC SAR Test Report Report No. : FA232843-01 FCC SAR Test Report APPLICANT : SparkLAN Communications, Inc. EQUIPMENT : 802.11abgn, USB Dongle BRAND NAME : SparkLAN MODEL NAME : WUBR-508N FCC ID : RYK-WUBR508N-D STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was received on May 08, 2012 and completely tested on May 09, 2012. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 37 TEL : 886-3-327-3456 Report Issued Date : May 29, 2012 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : RYK-WUBR508N-D FCC SAR Test Report Report No. : FA232843-01 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 2.1 Testing Laboratory .................................................................................................................................................. 5 2.2 Applicant ................................................................................................................................................................ 5 2.3 Manufacturer .......................................................................................................................................................... 5 2.4 Application Details .................................................................................................................................................. 5 3. General Information ...................................................................................................................................................... 6 3.1 Description of Device Under Test (DUT) ................................................................................................................ 6 3.2 Product Photos....................................................................................................................................................... 7 3.3 Applied Standards .................................................................................................................................................. 7 3.4 Device Category and SAR Limits ........................................................................................................................... 7 3.5 Test Conditions ....................................................................................................................................................... 7 4. Specific Absorption Rate (SAR) ................................................................................................................................... 8 4.1 Introduction ............................................................................................................................................................ 8 4.2 SAR Definition ........................................................................................................................................................ 8 5. SAR Measurement System ........................................................................................................................................... 9 5.1 E-Field Probe ........................................................................................................................................................10 5.2 Data Acquisition Electronics (DAE) ....................................................................................................................... 11 5.3 Robot .................................................................................................................................................................... 11 5.4 Measurement Server .............................................................................................................................................12 5.5 Phantom ................................................................................................................................................................12 5.6 Device Holder........................................................................................................................................................13 5.7 Data Storage and Evaluation ................................................................................................................................15 5.8 Test Equipment List ...............................................................................................................................................17 6. Tissue Simulating Liquids ...........................................................................................................................................18 7. Uncertainty Assessment .............................................................................................................................................20 8. SAR Measurement Evaluation ....................................................................................................................................23 8.1 Purpose of System…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : D1 of D2 TEL : 886-3-327-3456 Report Issued Date : May 29, 2012 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : RYK-WUBR508N-D FCC SAR Test Report Report No. : FA232843-01 Appendix D. Product Photos SPORTON INTERNATIONAL INC. Page Number : D2 of D2 TEL : 886-3-327-3456 Report Issued Date : May 29, 2012 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : RYK-WUBR508N-D FCC SAR Test Report Report No. : FA232843-01 Antenna Location : WLAN Antenna 1 <Tx / Rx> WLAN Antenna 0 <Tx / Rx> SPORTON INTERNATIONAL INC. Page Number : E1 of E1 TEL : 886-3-327-3456 Report Issued Date : May 29, 2012 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : RYK-WUBR508N-D FCC SAR Test Report Report No. : FA232843-01 Appendix E. Test Setup Photos Direct Laptop Plug-in for USB Configuration 1 (Horizontal Up with Phantom 5 mm Gap) USB Cable Plug-in for USB Configuration 2 (Horizontal Down with Phantom 5 mm Gap) Direct Laptop Plug-in for USB Configuration 3 (Vertical Front with Phantom 5 mm Gap) USB Cable Plug-in USB Configuration 4 (Vertical Back with Phantom 5 mm Gap) USB Cable Plug-in for USB Configuration 5 (Tip Mode with Phantom 5 mm Gap)

SPORTON International Inc. Report Format Version: a FCC TEST REPORT Report No. : FR232843-01AN FCC RADIO TEST REPORT According to 47 CFR FCC Part 15 Subpart E § 15.407 Equipment : 802.11abgn, USB Dongle Brand Name : SparkLAN Model No. : WUBR-508N Filing Type : New Application Applicant Manufacturer : SparkLAN Communications, Inc. 8F., No. 257, Sec. 2, Tiding Blvd., Neihu District, Taipei City 11493, Taiwan FCC ID : RYK-WUBR508N-D Received Date : Mar. 29, 2012 Final Test Date : May 14, 2012 Statement Test result included in this report is only for 802.11a/n (Band 1 to 3) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart E. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON International Inc. Page No. : i of ii TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Table of Contents 1 SUMMARY OF THE TEST RESULT ....................................................................................................................... 2 2 GENERAL INFORMATION ...................................................................................................................................... 3 2.1 Product Details .........................................................................................................................................................................................3 2.2 Table for Filed Antenna ............................................................................................................................................................................4 2.3 Table for Carrier Frequencies ..................................................................................................................................................................5 2.4 Table for Test Modes ...............................................................................................................................................................................6 2.5 Table for Testing Locations ......................................................................................................................................................................6 2.6 Table for Supporting Units .......................................................................................................................................................................7 2.7 Table for Parameters of Test Software Setting ........................................................................................................................................7 2.8 EUT Operation during Test ......................................................................................................................................................................8 2.9 Test Configuration ....................................................................................................................................................................................9 3 TEST RESULT ....................................................................................................................................................... 12 3.1 AC Power Line Conducted Emissions Measurement ............................................................................................................................12 3.2 99% Occupied Bandwidth Measurement ...............................................................................................................................................16 3.3 Maximum Conducted Output Power Measurement ...............................................................................................................................66 3.4 Power Spectral Density Measurement ...................................................................................................................................................70 3.5 Peak Excursion Measurement ...............................................................................................................................................................97 3.6 Radiated Emissions Measurement ......................................................................................................................................................123 3.7 Band Edge and Fundamental Emissions Measurement ......................................................................................................................179 3.8 Frequency Stability Measurement .......................................................................................................................................................189 3.9 Antenna Requirements ........................................................................................................................................................................191 4 LIST OF MEASURING EQUIPMENTS ................................................................................................................ 192 5 TEST LOCATION ................................................................................................................................................. 194 6 TAF CERTIFICATE OF ACCREDITATION ......................................................................................................... 195 APPENDIX A. TEST PHOTOS ................................................................................................................................. A7 APPENDIX B. PHOTOGRAPHS OF EUT…

Text truncated - open the document above for the full version.

SPORTON International Inc. Page No. : 133 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 48 Horizontal SPORTON International Inc. Page No. : 134 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 135 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 52 Horizontal SPORTON International Inc. Page No. : 136 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 137 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 56 Horizontal SPORTON International Inc. Page No. : 138 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 139 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 64 Horizontal SPORTON International Inc. Page No. : 140 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 141 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 100 Horizontal SPORTON International Inc. Page No. : 142 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 143 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 116 Horizontal SPORTON International Inc. Page No. : 144 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 145 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11a Ch. 140 Horizontal SPORTON International Inc. Page No. : 146 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 147 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN For Two Chains: Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11n Ch. 36 (20MHz) Horizontal SPORTON International Inc. Page No. : 148 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 149 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11n Ch. 40 (20 MHz) Horizontal SPORTON International Inc. Page No. : 150 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 151 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11n Ch. 48 (20 MHz) Horizontal SPORTON International Inc. Page No. : 152 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Vertical SPORTON International Inc. Page No. : 153 of 195 TEL : 886-3-327-3456 Issued Date : May 17, 2012 FAX : 886-3-327-0973 FCC ID : RYK-WUBR508N-D FCC TEST REPORT Report No. : FR232843-01AN Final Test Date Apr. 09, 2012 Test Site No. 03CH02-HY Temperature 23.9°C Humidity 63% Test Engineer Streak Configuration 802.11n Ch. 52 (20MHz) Hor…

Text truncated - open the document above for the full version.