S2Y-SDWLAN11BGNSDW-829

1. P 2. T it’s a 3. To WiF take lug WiFi‐S D urn on digit an indicato o establish Fi devices su e below act a. Enter “v b. Seek be camera. c. Remove d. A series e. WiFi fun 3‐1 The W “Peer‐to‐P 3‐1‐1 WiF D card into S tal still came r of WiFi‐SD Peer to Pee uch as PC, a ions: viewing still elow image e above ima s beeper so nction of W WiFi SD card Peer” mode 1 Connect to Fi‐SD Card SD socket of era power, t D card boots er( P2P ) Wi nother DSC l images mo with forwa age with DS unds will co WiFi SD card now is rea d e for data ex o PC with W d Operatin f Digital Stil two beeper s‐up succes Fi connectio C loaded wit ode” of DSC rd or backw C’s “delete ome out aft is turned o dy to conne xchange wit WiFi connect ng Instruct l Camera. r sounds wi ssfully. on between th WiFi SD c C. ward contro image” pro ter delete th n after bee ect with oth th following tivity ‐ tion ll come out n WiFi SD ca card or Sma l keypad of ocedures. his specific i per sounds er WiFi de v g operation t in 5 second ard and oth art phone, p f digital still image pictu stop. vices at methods”: ds, er pls. ure. Click Net w Dou b to sh Open IE o view/do w “Start” ‐> ” work” ble click “W ow “connec n PC and ke wnload/uplo ”Connect to iFi_SD” ID w cted” mark ey‐in web ad oad image o o” ‐> “WiFi c within WiFi ddress of ht or video files connectivity Network Se ttp://192.16 s to and fro y” ‐> “Select election Me 68.1.1 to m DSC to PC t a WiFi enu and wa C it PC In the Click uploa e web page “Quick Setu ad utilizatio e, click “Stat up” to defin on mode tus” to get W ne SSID & ft WiFi connec tp account i ction inform nformation mation n for server Click Click “Vid e “Photo” to eo” to view view & dow w, playback a wn load ima and downlo age files fro oad video fil m DSC to P es from DS C PC C to PC 4. T o belo Click o upload im ow actions: a. Enter “v b. Seek be still came “Upload” t mage or vide viewing still elow image era. o copy imag eo files to re l images mo with forwa ge files from emote serve ode” of DSC rd or backw m PC to DSC er via Acces C. ward contro C ss Point( AP l keypad of P ), pls. take f digital 5. T o load c. Remove d. A series e. WiFi fun f. DSC will the imag e o send imag ded by WiFi a. Enter “v b. Seek be still came e above ima s beeper so nction of W start uploa e file which ge or video i SD card, to viewing still elow image era. age with DS unds will co WiFi SD card ading all ima has existed files from W oo: l images mo with forwa C’s “delete ome out aft is turned o age files sto in server w WiFi SD card ode” of DSC rd or backw image” pro ter delete th n after bee ored in WiFi will NOT be t d over to th C. ward contro ocedures. his specific i per sounds SD card to transmitted e other dig l keypad of image pictu stop. remote ser d again. ital still cam f digital ure. rver, mera © K Fed 15.2 You res p 15. 1 This digit prov inst and inte inte c. Remove d. In the o images mo e. Seek be still came f. Remove mode will Key ASIC. All r eral Comm 21 are caution ponsible for 105(b) s equipmen tal device, p vide reason allation. Th , if not insta erference to erference w e above ima other digital ode” of DSC elow image era. e above ima start trans rights reserved unications ned that cha r complianc t has been pursuant to nable protec is equipme alled and us o radio comm ill not occur age with DS l still camer C. with forwa ge with DS C mitting files d. Information Commissio anges or mo e could void tested and o part 15 of ction agains nt generate sed in accor munication r in a partic C’s “delete ra loaded by rd or backw C’s “delete i s to the oth n in this docum on (FCC) Sta odifications d the user’s found to co the FCC rul st harmful in es, uses and rdance with s. However, cular installa image” pro y WiFi SD ca ward contro image” proc er DSC in “r ment is subjec tement s not expres s authority t omply with es. These li nterference d can radiate h the instruc r, there is no ation. If this ocedures. ard, enter “v l keypad of cedures, the receive” mo ct to change w ssly approve to operate t the limits fo mits are de e in a reside e radio freq ctions, may o guarantee s equipment viewing stil digital e DSC in “s e ode. without notice ed by the pa the equipm or a Class B esigned to ential quency ener y cause harm e that t does caus l end” e. art ment. rgy mful e harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.

Approval sheet Page 1 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 CERAMIC ANTENNA RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT8010080A3T *Contents in this sheet are subject to change without prior notice. Approval sheet Page 2 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 FEATURES
Surface Mounted Devices with a small dimension of 8.0 x 1.0 x 0.8 mm 3 meet future miniaturization trend.
Low profile for thin type terminal
High Stability in Temperature / Humidity Change
High mechanical strength APPLICATIONS
Bluetooth
Wireless LAN
HormRF
ISM band 2.4GHz wireless applications CONSTRUCTION Outline of 2.4GHz Antenna – RFANT8010080A3T DIMENSIONS Figure Symbol Dimension L 8.00 ± 0.20mm W 1.05 ± 0.20 mm T 0.80 ± 0.10 mm A 0.30 ± 0.20 mm 1. Identification mark 2. Soldering terminal 3. Feeding 2 1 3 Approval sheet Page 3 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 SOLDER LAND PATTERN DESIGN Figure (Vertical type) ELECTRICAL CHARACTERISTICS RFANT8010080A3T Specification Working Frequency Range 2.4 GHz ～ 2.5GHz Gain 2 dBi (Typical) VSWR 2 max. Polarization Linear Azimuth Bandwidth Omni-directional Impedance 50Ω Rated Power (max.) 3 Watts Maximum Input Power 5 Watts for 5 minutes Operation Temperature -40 ̊C ~ +85 ̊C Remark: The specification is defined based on the test board dimension as in below Approval sheet Page 4 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 Antenna on Test Board ( FR4 Thickness 0.8mm) Vertical type Antenna S11 on Test Board Vertical type Approval sheet Page 5 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 Empty Area GROUND 42x18 mm X Y Z Empty Area GROUND 30.5x18 mm X Y Z RADIATION PATTERN (Vertical type) Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT8010080A3T antenna was measur ed based on the PCB size and installation position as shown in the below figure Test Board Vertical Horizontal Y - Z Plane Average Gain= 1.19 dBi Peak Gain = 3.03 dBi Average Gain = 0.71 dBi Peak Gain= -1.37 dBi Average Gain=-8.6 dBi X - Z Plane Average Gain= -2.91dBi Peak Gain= -3.76 dBi Average Gain= -8.72dBi Peak Gain= -0.25 dBi Average Gain= -4.24 dBi X - Y Plane Average Gain= -0.95 dBi Peak Gain= 0.76 dBi Average Gain= -5.81dBi Peak Gain= 1.37 dBi Average Gain= -2.67 dBi z Y z Y z X z X X Y X Y Approval sheet Page 6 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 ± 5°C *Immersion time：2 ± 0.5 sec *Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 ± 5°C *Leaching immersion time：30 ± 0.5 sec *Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：270±5°C *Immersion time：10±1 sec *Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units； 2 times for each side. No mechanical damage. Samples shall satisfy electrical specification after test. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 5±1 sec. Measurement to be made after keeping at room temperature for 24±2 hours No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 7 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 Temperature cycle JIS C 0025 1. 30±3 minutes at -40°C±3°C, 2. 10~15 minutes at room temperature, 3. 30±3 minutes at +85°C±3°C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Samples shall satisfy electrical specification after test. High temperature JIS C 0021 *Temperature：85°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：40±2°C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 24±2 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Samples shall satisfy electrical specification after test. Low temperature JIS C 0020 *Temperature：-40°C±2°C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs No mechanical damage. Samples shall satisfy electrical specification after test. Approval sheet Page 8 of 9 ASC_RFANT8010080A3T_V02 Apr.2010 SOLDERING CONDITION Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2 Fig 2. Infrared soldering profile ORDERING CODE RF ANT 801008 0 A 3 T Walsin HF: RF /Pb free device Product code ANT : Antenna Dimension code Per 2 digits of Length, Width, Thickness : e.g. : 801008 = Length 80, Width 10, Thickness 8 Unit of dimension 0 : 0.1 mm 1 : 1.0 mm Application A : 2.4GHZ ISM Band Specification Design Code Packing T : Reeled Minimum Order…

Text truncated - open the document above for the full version.

Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Front View of EUT Back View of EUT Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 1 Side View of EUT – 2 Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 3 Side View of EUT – 4 Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written ap…

Text truncated - open the document above for the full version.

Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT-1 Open View of EUT-2 Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal View of EUT-1 Internal View of EUT-2 Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Antenna Location

RF EXPOSURE Standard Applicable According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Portable device. Measurement Result: This is a portable device and the max conducted power is 12.93dBm (0.019634W), which is below the threshold 60/f(GHz) mW (24.48mW), therefore SAR test is not required

Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Page: 1 of 88 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: SD WLAN Card with microSD slot Brand Name: Cloud flash Marketing Name: SPECTEC Model No.: SDW-829 Model Difference: N/A FCC ID: S2Y-SDWLAN11BGN Report No.: ER/2012/70006 Issue Date: Nov. 23, 2012 FCC Rule Part: §15.247, Cat: DTS Prepared for: SPECTEC COMPUTER CO., LTD. 6F. No.92. Nanking E. Rd. Sec. 5, Taipei, Taiwan. Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This doc- ument may be altered or revised by SGS Taiwan Ltd. per- sonnel only, and shall be noted in the revision section of the document. Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Page: 2 of 88 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工 路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE Applicant: SPECTEC COMPUTER CO., LTD. 6F. No.92. Nanking E. Rd. Sec. 5, Taipei, Taiwan. Product Name: SD WLAN Card with microSD slot Marketing Name: Cloud flash Brand Name: SPECTEC Model No.: SDW-829 Model Difference: N/A File Number: ER/2012/70006 Date of test: July.17, 2012 ~ Nov. 23, 2012 Date of EUT Received: July.17, 2012 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4:2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 22, 2012 Marcus Tseng / Engineer Prepared By: Date Nov. 22, 2012 Cherry Chen / Clerk Approved By: Date Nov. 22, 2012 Jim Chang / Supervisor Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Page: 3 of 88 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Co…

Text truncated - open the document above for the full version.

Report No.: ER/2012/70006 FCC ID: S2Y-SDWLAN11BGN Issue Date: Nov. 23, 2012 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance…

Text truncated - open the document above for the full version.