S4A39-0007-00-00Kamai

What’s Included KamaI HybrId TV medIa Player 500 Series Quick Start Guide dIN-to-rCa Cable Kamai Hybrid TV media PlayerProduct manual (Optional) remote Control Guide (Optional) Quick Start Guide remote Control* 2 batteriesPower adapter*ethernet Cable (Optional) * The remote Control and Power adapter may vary and is dependent on your service provider. additional items that may be required (not included): • ethernet Cable • HdmI Cable • rF Coaxial Cable • digital audio Cable • Network router Kamai at a glance Power Indicator Sd Card reader USb antenna/Cable Connector (Optional) digital audio Sd Video Connector HdmI Connector ethernet Connector dC Power Jack Factory reset Power on/off ▲ ◄OK► ▼ arrOW KeyS to navigate within the menus and OK to select ■ ► ||Stop / Start / Pause playback GUIde displays program guide INFO displays program information CH|PG Changes channel up/down meNU displays menu or home screen VOl Increases or decreases volume baCK Goes back one level within menus mUTe mutes volume eXIT exits the current menu item basic remote Functions Step 2: Connecting TV Source (Optional) Connect to basic unencrypted Cable TV Source or antenna Source (Outdoor or Indoor antenna) S-VIdeO Cable included Cable not included Composite Video Step 1: Connecting to TV Select only one TV option, then proceed to TV Source Option #1 Connect via HdmI (recommended) Option #2 Connect via dIN-to-rCa S-VIdeO Cable not included Step 3: Connecting to Network Select only one Networking option, then proceed to Powering Up Option #1 Connect to a Wired Network via dSl, Cable modem or Network router Cable not included Option #2 Connect to a Wireless Network via a Wireless Network router NOTE: Internal Wi-Fi is an optional feature of Kamai. Please contact your service provider for the availability and detailed instructions on the wireless network configuration. Connecting to Power Source 1. Connect the power cord to the POWer port on the back of the Kamai. 2. Plug the aC power adapter to a power outlet. 3. Follow the on-screen instructions. NOTE: make sure your TV is turned on and the correct video input is selected. Step 4: Powering Up Setting Up remote Control 1. Open the battery cover by pressing down on the battery cover latch and sliding it off. 2. Insert the batteries, matching the “+” and “-” marks on the batteries with the interior of the remote control. 3. Snap the battery cover to close. NOTE: Please refer to the remote Control Guide for details Important Safety Instructions • WarNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • do not use this apparatus near water. • Clean only with dry cloth. • do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • do not defeat the safety purpose of the polarized or grounding-type plug. a polarized plug has two blades with one wider than the other. a ground- ing type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obso- lete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • To reduce the risk of electric shock, dO NOT remove cover or back panel. No user serviceable parts inside. refer servicing to qualified personnel. Important Safety Instructions (Continued) • To help prevent electric shock, plug the power cable into properly ground- ed sources. Use only properly grounded extension cords and adaptors, if they are needed. • The aC main plug is used as the disconnect device, the disconnect device shall remain readily operable. • make sure nothing is lying on any of the cables. • be sure the cables are located where they will not be stepped on or tripped over. • do not spill food or liquids onto the unit. • do not push any objects into the free slots. doing so will damage the unit, can cause fire or electrical shock, and can short out interior components. • do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • do not block cooling vents. • do not place the equipment in a closed-in wall unit. • When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cables. • When you connect a cable, make sure both connectors are correctly ori- ented and aligned before connecting to avoid bending connector pins. • For PlUGGable eQUIPmeNT, the socket-outlet should be installed near the equipment for easy access. • Changes or modifications not expressly approved by the party responsible could void the user’s authority to operate this device. declaration of Conformity To ensure proper use of this product, please read this manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location. WarNING: This symbol indicates the presence of uninsula…

Text truncated - open the document above for the full version.

1 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC APPENDIX PHOTOGRAPHS OF EUT 2 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC All of EUT External of EUT – 1 3 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC External of EUT – 2 External of EUT – 3 4 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC External of EUT – 4 External of EUT – 5 5 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC External of EUT – 6

Company Name: Entone Te c h n o l o g i e s (HK) Lim Address: Level 28, Saxon To w e r, 7 Cheung Shun Street, Lai Chi Kok City: Kowloon Country: Hong Kong Date: 08/08/2012 FCC ID: S4A39-0007-00-00

1 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC APPENDIX PHOTOGRAPHS OF EUT 2 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Internal of EUT – 1 Internal of EUT-2 3 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Internal of EUT – 3 Internal of EUT-4 4 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Internal of EUT – 5 Internal of EUT – 6 5 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Internal of EUT – 6 Internal of EUT – 8 (WLAN Antenna) 6 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Internal of EUT – 9 (WLAN Antenna)

Page: 1 of 93 TEST REPORT of FCC Part 15 Subpart C New Application; Class I PC; Class II PC Product : Kamai Brand: entone Model: 500 Model Difference: N/A FCC ID: S4A39-0007-00-00 FCC Rule Part: §15.247, Cat: DTS Applicant: Entone Technologies (HK) Limited Address: Level 28, Saxon Tower, 7 Cheung Shun Street, Lai Chi Kok, Hong Kong Test Performed by: International Standards Laboratory <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E -0013; MRA TW1036; TAF: 0997; IC: IC4067B-3; *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-12LR111FC Issue Date : 2012/08/08 Test results given in this report apply only to the specific sample(s) tested and are traceable to nation- al or international standard through calibration of the equipment and evaluating measurement uncertainty herein. This report MUST not be used to claim product en- dorsement by TAF, NVLAP or any agency of the Government. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory. -2 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC VERIFICATION OF COMPLIANCE Applicant: Entone Technologies (HK) Limited Product Description: Kamai Brand Name: entone Model No.: 500 Model Difference: N/A FCC ID: S4A39-0007-00-00 Date of test: 2012/07/06 ~ 2012/07/10 Date of EUT Received: 2012/07/06 We hereby certify that: All the tests in this report have been performed and recorded in accordance with the standards de- scribed above and performed by an independent electromagnetic compatibility consultant, Interna- tional Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equip- ment tested as described in this report is in compliance with the limits of above standards. Test By: Date: 2012/08/08 Dion Chang / Engineer Prepared By: Date: 2012/08/08 Eva Kao / Technical Supervisor Approved By: Date: 2012/08/08 Vincent Su / Technical Manager -3 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Version Version No. Date Description 00 2012/08/08 Initial creation of document -4 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Table of Contents 1 GENERAL INFORMATION .................................................................................................... 6 1.1 Related Submittal(s) / Grant (s) ..................................................................................................... 7 1.2 Test Methodology .......................................................................................................................... 7 1.3 Test Facility .................................................................................................................................... 7 1.4 Special Accessories ........................................................................................................................ 7 1.5 Equipment Modifications ............................................................................................................... 7 2 SYSTEM TEST CONFIGURATION ....................................................................................... 8 2.1 EUT Configuration ........................................................................................................................ 8 2.2 EUT Exercise ................................................................................................................................. 8 2.3 Test Procedure ................................................................................................................................ 8 2.4 Configuration of Tested System ..................................................................................................... 9 3 SUMMARY OF TEST RESULTS .......................................................................................... 10 4 DESCRIPTION OF TEST MODES ....................................................................................... 10 5 CONDUCTED EMISSION TEST........................................................................................... 11 5.1 Standard Applicable: .................................................................................................................... 11 5.2 Measurement Equipment Used: ................................................................................................... 11 5.3 EUT Setup: ................................................................................................................................... 11 5.4 Measurement Procedure: ............................................................................................................. 12 5.5 Measurement Result: ................................................................................................................... 12 6 PEAK /AVERAGE UTPUT POWER MEASUREMENT .................................................... 15 6.1 Standard Applicable: .................................................................................................................... 15 6.2 Measurement Equipment Used: ................................................................................................... 16 6.3 Test Set-up: .................................................................................................................................. 16 6.4 Measurement Procedure: ............................................................................................................. 16 6.5 Measurement Result: ................................................................................................................... 18 7 6dB Bandwidth(EBW) ....................................................…

Text truncated - open the document above for the full version.

Page: 1 of 93 TEST REPORT of FCC Part 15 Subpart C New Application; Class I PC; Class II PC Product : Kamai Brand: entone Model: 500 Model Difference: N/A FCC ID: S4A39-0007-00-00 FCC Rule Part: §15.247, Cat: DTS Applicant: Entone Technologies (HK) Limited Address: Level 28, Saxon Tower, 7 Cheung Shun Street, Lai Chi Kok, Hong Kong Test Performed by: International Standards Laboratory <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E -0013; MRA TW1036; TAF: 0997; IC: IC4067B-3; *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-12LR111FC Issue Date : 2012/08/08 Test results given in this report apply only to the specific sample(s) tested and are traceable to nation- al or international standard through calibration of the equipment and evaluating measurement uncertainty herein. This report MUST not be used to claim product en- dorsement by TAF, NVLAP or any agency of the Government. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory. -2 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC VERIFICATION OF COMPLIANCE Applicant: Entone Technologies (HK) Limited Product Description: Kamai Brand Name: entone Model No.: 500 Model Difference: N/A FCC ID: S4A39-0007-00-00 Date of test: 2012/07/06 ~ 2012/07/10 Date of EUT Received: 2012/07/06 We hereby certify that: All the tests in this report have been performed and recorded in accordance with the standards de- scribed above and performed by an independent electromagnetic compatibility consultant, Interna- tional Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equip- ment tested as described in this report is in compliance with the limits of above standards. Test By: Date: 2012/08/08 Dion Chang / Engineer Prepared By: Date: 2012/08/08 Eva Kao / Technical Supervisor Approved By: Date: 2012/08/08 Vincent Su / Technical Manager -3 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Version Version No. Date Description 00 2012/08/08 Initial creation of document -4 of 93- FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Table of Contents 1 GENERAL INFORMATION .................................................................................................... 6 1.1 Related Submittal(s) / Grant (s) ..................................................................................................... 7 1.2 Test Methodology .......................................................................................................................... 7 1.3 Test Facility .................................................................................................................................... 7 1.4 Special Accessories ........................................................................................................................ 7 1.5 Equipment Modifications ............................................................................................................... 7 2 SYSTEM TEST CONFIGURATION ....................................................................................... 8 2.1 EUT Configuration ........................................................................................................................ 8 2.2 EUT Exercise ................................................................................................................................. 8 2.3 Test Procedure ................................................................................................................................ 8 2.4 Configuration of Tested System ..................................................................................................... 9 3 SUMMARY OF TEST RESULTS .......................................................................................... 10 4 DESCRIPTION OF TEST MODES ....................................................................................... 10 5 CONDUCTED EMISSION TEST........................................................................................... 11 5.1 Standard Applicable: .................................................................................................................... 11 5.2 Measurement Equipment Used: ................................................................................................... 11 5.3 EUT Setup: ................................................................................................................................... 11 5.4 Measurement Procedure: ............................................................................................................. 12 5.5 Measurement Result: ................................................................................................................... 12 6 PEAK /AVERAGE UTPUT POWER MEASUREMENT .................................................... 15 6.1 Standard Applicable: .................................................................................................................... 15 6.2 Measurement Equipment Used: ................................................................................................... 16 6.3 Test Set-up: .................................................................................................................................. 16 6.4 Measurement Procedure: ............................................................................................................. 16 6.5 Measurement Result: ................................................................................................................... 18 7 6dB Bandwidth(EBW) ....................................................…

Text truncated - open the document above for the full version.

1 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC APPENDIX PHOTOGRAPHS OF SET UP 2 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Radiated Emission Set up Photo 3 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC Conducted Emission Set up Photo 4 FCC ID: S4A39-0007-00-00 International Standards Laboratory Report Number: ISL-12LR111FC