SCD030025USB Wireless Adapter

WUB1900RT USB Wireless Adapter Quick Installation Guide V1.0 2011-07-21 USB Wireless Adapter Quick Installation Guide 1 Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment USB Wireless Adapter Quick Installation Guide 2 1. Package Contents The following items should be found in your package: ¾ Wireless-N USB Adapter ¾ Quick Installation Guide ¾ CD-ROM Please make sure that the package contains the above items, if any of the listed items is damaged or missing, please contact with your distributor. 2. Product Overview The USB Wireless Adapter improves wireless transmission over long distance and fully supports the 11N technology which enables you to connect to wireless networks at farther distances than before. It provides up to 150Mbps data transmission rate in 2.4GHz frequency, complies with IEEE 802.11n, IEEE 802.11g and IEEE802.11b and backwards compatible with all IEEE 802.11n/g/b devices. When the adapter is connecting to the standard 11n, 11g or 11b APs or Routers, it can perform much better than standard clients. It also supports wireless LAN up to 128-bit WEP, WPA/WPA2 encryption security that protects your wireless network from eavesdropping. This Wireless-N USB Adapter provides enhanced multimedia support. It is a cost-effective and best solution for you to build your wireless network. 3. System Requirement You must have the following at least ¾ A laptop computer/desktop PC with an available 32-bit USB slot ¾ At least a 300MHz processor and 32MB of memory ¾ Windows 98SE, ME, 2000, XP, Vista/7 ¾ A CD-ROM Drive ¾ USB controller properly installed and working in the computer ¾ 、 A 802.11n 802.11g or 802.11b Access Point (for infrastructure Mode) or another 、 802.11n802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode). USB Wireless Adapter Quick Installation Guide 3 4. Driver and Utility Installation Before you proceed with the installation, please notice following descriptions. ¾ Please do not install the adapter into your computer before installing the driver from the CD. ¾ We use driver installation in Windows XP for example. Procedures are similar for Windows 98SE/Me/2000/2003/vista/7. ¾ If you have installed the Turbo Wireless LAN USB Adapter driver & utility before, please uninstall the old version first. Next is driver and utility installation: ¾ Insert the Driver and Utility CD-ROM into the CD-ROM driver. ¾ The Wizard should run automatically, and the driver installation window should appear. If not, click the Start button and choose Run and enter D:\autorun.exe (if ‘D’ is the letter of your CD-ROM drive) Figure 1 ¾ Select click "Next”， ¾ Figure 2 ¾ Click install, then it will finish the installation automatically. Now you can insert you USB card into computer, it will be installed automatically USB Wireless Adapter Quick Installation Guide 4 ¾ ¾ Figure 3 5. Connect to Wireless Network The Utility appears as an icon on the system tray of Windows while the adapter is running. You can open the utility by double-click on the icon, Figure 4 You can use the following methods to connect to a wireless network. Method1: ¾ Select Network tab and click Rescan button to refresh current available wireless network USB Wireless Adapter Quick Installation Guide 5 Figur Figure 5 ¾ Highlight the wireless network you want to connect, click connect. If it is encrypted, enter authentication key and then click OK. The connection is successful USB Wireless Adapter Quick Installation Guide 6 Figure 6 Method2: Convenient way to connect to a safety wireless network Note: you can use method2 only if you have a wireless router that has WPS hardware button ¾ Push the WPS hardware button of the wireless Router until the WPS LED is flashing ¾ Push the WPS button in this wireless network card for a few seconds ¾ The safe connection will be established automatically, please wait USB Wireless Adapter Quick Installation Guide 7 Figur Figure 7 6. FAQ This chapte…

Text truncated - open the document above for the full version.

CERTIFICATE OF COMPLIANCE Ref No.: NEI-FCCE-1-1108C199 Date of Issue: Sep. 19, 2011 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment USB Wireless Adapter Model Name WUB1900RT Brand Name LanReady Applicant LANREADY TECHNOLOGIES INC. Address 3F, No. 166, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan (R.O.C.) Measurement ANSI C63.4 (2003) Method The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCE-1-1108C199) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No.37, Lane 365, Yang Guang St., NeiHu District 114., Taipei, Taiwan TEL：+886-2-2657-3299 FAX：+886-2-2657-3331 Page 1 of 2 CERTIFICATE OF COMPLIANCE Ref No.: NEI-FCCE-1-1108C199 Date of Issue: Sep. 19, 2011 OEM Model: BS-WN-USB/ AWLL5099/ UW-200N-Pro/ K-1500MU/ WUB-100-nano; OEM Brand: BlueStork/ Airlink 101/ Cerio/ Kozumi/ Wavecore; (The following as blank) Neutron Engineering Inc. B1, No.37, Lane 365, Yang Guang St., NeiHu District 114., Taipei, Taiwan TEL：+886-2-2657-3299 FAX：+886-2-2657-3331 Page 2 of 2

Neutron Engineering Inc. Project No.: 1108C199 Page 2 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 2 of 6 1108C199 1108C199

SN:642511000001 MAC:00212F2FBA82 NCC:ABCD0123456789 FCC ID:SCD030025

Neutron Engineering Inc. Project No.: 1108C199 Page 3 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 3 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 4 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 4 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 5 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 5 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 6 of 6 1108C199 1108C199 Neutron Engineering Inc. Project No.: 1108C199 Page 6 of 6 1108C199 1108C199

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 1 of 123 FCC Radio Test Report FCC ID: SCD030025 This report concerns (check one) : Original Grant Class II Change Issued Date : Sep. 19, 2011 Project No. : 1108C199 Equipment : USB Wireless Adapter Model Name : WUB1900RT Applicant : LanReady Technologies Inc. Address : 3F, No. 166, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan (R.O.C.) Manufacturer LONG BEN INTERNATIONAL LIMITED Address NO.19,Jianshe Rd., Shima Village, Tangxia Town, Dongguan City, China. Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 07, 2011 Date of Test: Sep. 07, 2011 ~ Sep. 17, 2011 Testing Engineer : (Ares Liu) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 2 of 123 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 3 of 123 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS (RADIATED MODE) 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 5 . BANDWIDTH TEST 72 5.1 APPLIED PROCEDURES / LIMIT 72 5.1.1 MEASUREMENT INSTRUMENTS LIST 72 5.1.2 TEST PROCEDURE 72 5.1.3 DEVIATION FROM STANDARD 72 5.1.4 TEST SETUP 73 5.1.5 EUT OPERATION CONDITIONS 73 5.1.6 TEST RESULTS 74 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 4 of 123 Table of Contents Page 6 . MAXIMUM OUTPUT POWER TEST 82 6.1 APPLIED PROCEDURES / LIMIT 82 6.1.1 MEASUREMENT INSTRUMENTS LIST 82 6.1.2 TEST PROCEDURE 82 6.1.3 DEVIATION FROM STANDARD 82 6.1.4 TEST SETUP 82 6.1.5 EUT OPERATION CONDITIONS 82 6.1.6 TEST RESULTS 83 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 91 7.1 APPLIED PROCEDURES / LIMIT 91 7.1.1 MEASUREMENT INSTRUMENTS LIST 91 7.1.2 TEST PROCEDURE 91 7.1.3 DEVIATION FROM STANDARD 91 7.1.4 TEST SETUP 91 7.1.5 EUT OPERATION CONDITIONS 91 7.1.6 TEST RESULTS 92 8 . POWER SPECTRAL DENSITY TEST 112 8.1 APPLIED PROCEDURES / LIMIT 112 8.1.1 MEASUREMENT INSTRUMENTS LIST 112 8.1.2 TEST PROCEDURE 112 8.1.3 DEVIATION FROM STANDARD 112 8.1.4 TEST SETUP 112 8.1.5 EUT OPERATION CONDITIONS 112 8.1.6 TEST RESULTS 113 9 . EUT TEST PHOTO 121 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 5 of 123 1. CERTIFICATION E q u i p m e n t : USB Wireless Adapter Brand Name : LanReady Model Name : WUB1900RT A p p l i c a n t : LanReady Technologies Inc. Date of Test : Sep. 07, 2011 ~ Sep. 17, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1108C199) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 6 of 123 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(b)(3) Peak Output Power PASS 15.209/15.205 Radiated Spurious Emission PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutr…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 121 of 123 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 121 of 123 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 122 of 123 Radiated Measurement Photos 30MHz~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 122 of 123 Radiated Measurement Photos 30MHz~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 123 of 123 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C199 Page 123 of 123 Radiated Measurement Photos Above 1000MHz