SCDDS5055-Ports 10/100/1000 Mbps Green Switch

Quick Installation Guide 5-Port 10/100/1000 Mbps Green Switch Model# AGSW503 Ver. 1A This Quick Installation Guide tells you how to install your 5-Port 10/100/1000Mbps Green Switch, and how to connect it to your Gigabit Ethernet network. The 5-Port 10/100/1000Mbps Green Switch is designed for energy saving, easy installation and high performance in an environment where network traffic and the number of users increase continuously. You can add other Ethernet devices like computers, IP cameras, and Network Attached Storage (NAS) onto your network quickly and easily. The Green EEE (Energy Efficient Ethernet) technology of AGSW503 automatically reduces the power usage when a connected port is detected inactive (idle or cable-unplugged) and intelligently allocates less power for a port that connects with an Ethernet cable shorter than 20m (66 ft)*. Before you begin the installation, please check the items of your package: Package Contents:  5-Port 10/100/1000Mbps Green Switch  Power Adapter  Quick Installation Guide Section 1 Introduction Hardware Description Front Panel LED Indicators Rear Panel Item Name Description Power Power connector, DC 5V / 1.0A. 1 - 5 10/100/1000Mbps LAN ports 1 to 5. LED Color Status Description POWER Green On The switch is powered on. Off The switch is powered off. LNK/ACT Green On LAN port is connected. Off LAN port is not connected. Flashing Transferring or receiving data. Connecting the Switch Note: Operating Environment This switch must be installed and operated within the limits of specified operating temperature (32~131 0 F) and humidity (10~90% Non-condensing). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heater, radiator, or direct exposure to sun. Prevent entering of water and moisture into the unit. If necessary, use dehumidifier to reduce humidity. Step 1 Connecting to network devices The RJ-45 ports on the switch support Auto-MDI/MDI-X function which allows using straight-through or cross-over type cables to connect this switch to workstation or hub. Connect one end of the network cable to the RJ-45 port on the rear panel, and connect the other end of the network cable to the RJ-45 port on the network device. Follow the same procedure to connect all the RJ-45 ports of the switch. The UTP network cables must be four pairs Category 5 or above for 1000Mbps data transmission; two pairs Category 5 for 100Mbps data transmission; two pairs Category 3, 4 or 5 standards for 10Mbps data transmission. Maximum length, using UTP cable, between the switch and connected device is 100 meters (300ft). Step 2 Connecting the power Connect the output end of the power adapter to the power connector on the rear panel of the switch. Connect the power adapter to the power outlet. The green Power LED on the front panel should be lit. Once the network cable is connected to both ends in Step 1 and the attached network device is powered on, the green LNK/ACT LED should be lit. Section 2 Troubleshooting 1. Power LED is not lit  Check if the power adapter is properly connected to the power outlet. Make sure the power jack is firmly plugged into the power socket of the switch. 2. Link/Activity is not lit when connect to 10/100/1000Mbps device  Check the power switch of the network device attached to the switch; make sure it is turned ON.  Check the network cable; make sure it is properly connected to the switch and the network device.  Check the network cable; make sure the UTP cables comply with the specifications described in Section 2. Section 3 Section 4 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Technical Support E-mail: s [email protected] Website: www.airlink101.com *Power savings may vary depending on products used . Actua l da ta throughput will vary. Network conditions and en vironmental factors lower actua l da ta t hroughput rate. Spe cifications are sub ject to cha nge without no tice. All rights reserved . Cop yright © 2011 AirLink10 1®. AirLink10 1®, t he stylized AirLink10 1® logo, spe cific product de signations, an d all othe r words and logos tha t are identified as trad emarks an d/or service marks are, unless no ted othe rwise, the trad emarks and s ervice marks of AirLink10 1®. All othe r product or service names are t he property of the ir respective ho lders. AirLink101® products are protected under numerou s U.S. and f oreign pa tents and pending ap plications, mask work rights , and cop yrights. Sectio…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA SCK 58mm Jack MDI 1 SCK LED LED MDI 0 SDA nRESET nRESET EEPROM (Optional) SDA 102mm X'Former & Phone Jack MDI 4 RTL8367 PQFP128 X'Former & Phone Jack Block Diagram MDI 3 XTAL 25M DC X'Former & Phone Jack MDI 2 Title SizeDocument NumberRev Date:Sheet of Page 21.1 DS505-AGSW 503 B 26Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheet of Page 21.1 DS505-AGSW 503 B 26Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheet of Page 21.1 DS505-AGSW 503 B 26Thursday, July 26, 2012

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – All View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View EUT – Adapter View EUT – Adapter Label View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Location

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Uncover View EUT – Main Board Top View EUT –Main Board Bottom View

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Power LED 1.0V=0.925V*(1+ 1k/12k) DC 5V1A 3.3V DVDDIO DVDDL AVDDH AVDDL DVDDIOAVDDH VDC VDC VDC DVDDIO DVDDL AVDDL Title SizeDocument NumberRev Date:Sheet of Page 31.1 B 36Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheet of Page 31.1 B 36Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheet of Page 31.1 AGSW 503 B 36Thursday, July 26, 2012 CN1 DC_JACK CN1 DC_JACK C19 0.1uF/10V C0402 C19 0.1uF/10V C0402 C100.1uF/10VC100.1uF/10V C6 0.1uF/16V C0402 C6 0.1uF/16V C0402 EC5 100uF/M/16V/DIP/LESR EC5 100uF/M/16V/DIP/LESR C13 1000pF/25V C13 1000pF/25V L1 75OHMS/100MHz08051A L1 75OHMS/100MHz08051A L4 33uH/2A L4 33uH/2A EC2 100uF/M/16V/DIP/LESR EC2 100uF/M/16V/DIP/LESR C2 0.1uF/16V C0402 C2 0.1uF/16V C0402 C17 0.1uF/10V C0402 C17 0.1uF/10V C0402 + 100uF/M/16V/DIP/LESR EC7 + 100uF/M/16V/DIP/LESR EC7 C16 0.1uF/10V C0402 C16 0.1uF/10V C0402 C7 0.1uF/10V C7 0.1uF/10V + EC4 220uF/M/16V/DIP/LESR + EC4 220uF/M/16V/DIP/LESR C21 1UF/6.3V C0402 C21 1UF/6.3V C0402 U2 AP2952/VIC2618DQ U2 AP2952/VIC2618DQ Boost 1 VIN 2 LX 3 GND 4 FB 5 NC 6 SHDN 7 SS 8 C113.9nF/50VC113.9nF/50V C8 1UF/6.3V C0402 C8 1UF/6.3V C0402 C1 0.01uF/16V C0402 C1 0.01uF/16V C0402 R1 470/5% R0402 R1 470/5% R0402 R5 1K/1% R5 1K/1% R36.8K/1%R36.8K/1% U1AMS1117-3.3/VIC1117U1AMS1117-3.3/VIC1117 GND 1 VOUT 2 VIN 3 C23 1UF/6.3V C0402 C23 1UF/6.3V C0402 C5 1000pF/25V C0402 C5 1000pF/25V C0402 R412K/1%R412K/1% D1LED/(R)D1LED/(R) 12 C22 0.1uF/10V C0402 C22 0.1uF/10V C0402 FB1 75OHMS/100MHz08051A FB1 75OHMS/100MHz08051A L2 75OHMS/100MHz08051A L2 75OHMS/100MHz08051A C4 0.1uF/16V C0402 C4 0.1uF/16V C0402 R6 NC/10R R6 NC/10R C15 1UF/6.3V C0402 C15 1UF/6.3V C0402 C20 NC/1nF C20 NC/1nF C90.01uF/16VC90.01uF/16V D91N4148/NCD91N4148/NC C18 0.1uF/10V C0402 C18 0.1uF/10V C0402 + 100uF/M/16V/DIP/LESR EC3 + 100uF/M/16V/DIP/LESR EC3 C14 1UF/6.3V C0402 C14 1UF/6.3V C0402 R2100K/5%R2100K/5% C3 0.01uF/16V C0402 C3 0.01uF/16V C0402 L5 60ohm100MHZ2A L5 60ohm100MHZ2A C12 0.1uF/16V C0402 C12 0.1uF/16V C0402 L3 75OHMS/100MHz08051A L3 75OHMS/100MHz08051A 5 5 4 4 3 3 2 2 1 1 DD CC BB AA These pin must connect to GND throught 1k ohm resistor when unused. PIN77 P3LED0 / Must Pull Low PIN84 P0LED2: Must Pull High or Floating PIN81 P1LED2: Must Pull High or Floating PIN82 P1LED0: Floating PIN89 P0LED0: Floating PIN76 P3LED2 / Must Pull High Pull Low: Enable 8051 PIN73 P4LED0 / EEPROM_MOD ** Pull High: Disable 8051 Pull High: Disable Auto load EEPROM ** Pull Low: 24C02~24C16 PIN79 P2LED0 / DISAUTOLOAD PIN78 P2LED2 / DIS_8051 Pull High: 24C32~ ** Pull Low: Enable Auto load EEPROM SCK PLLVDDL1PLLVDDL0 RESERVED_A SDA P0MDIBN P4MDIAP P4MDIBN P1MDIBP P4MDICP P4MDIBP P2MDIDP SDA RESERVED_B nRESET PLLVDDL0 SCK P2MDICP P3MDICNP2MDIDN P0MDIAN P1MDIAP P3MDIBP P1MDIBN P0MDIDP P3MDICPP3MDIAN P1MDICP P2MDICN P1MDICN P3MDIAP PLLVDDL1 P3MDIBN RESERVED_C P1MDIDP P4MDIDN P0MDICP P4MDIAN P2MDIBP P1MDIDN P0MDIDN P2MDIBN P0MDIAP P1MDIAN P4MDIDP P4MDICN P3MDIDP P0MDIBP P0MDICN P2MDIAN P2MDIAP P3MDIDN AVDDH AVDDLDVDDL DVDDIO AVDDLAVDDL DVDDIO DVDDL AVDDL AVDDH AVDDL DVDDIO AVDDH DVDDIO AVDDL AVDDH DVDDIO DVDDLDVDDL AVDDH AVDDH DVDDL AVDDL P0MDIAN 5 P0MDIDN 5 P0LED1 6 P2MDICP 5 P1MDIBP 5 P3LED0 6 P2MDICN 5 P2MDIBN 5 P4LED2 6 P1MDICN 5 P3LED1 6 P0MDIBP 5 P3LED2 6 P0MDIBN 5 P1MDICP 5 P1MDIDN 5 P4MDIDN 5 P0LED2 6 P2MDIDP 5 P3MDIAN 5 P2MDIDN 5 P2LED0 6 P1LED2 6 P0MDICP 5 P4MDIDP 5 P0MDIAP 5 P2MDIBP 5 P1MDIAN 5 P0MDICN 5 P3MDIAP 5 P1MDIDP 5 P3MDICP 5 P1LED1 6 P2MDIAP 5 P2LED1 6 P1MDIAP 5 P2MDIAN 5 P0MDIDP 5 P3MDIBN 5 P3MDIBP 5 P2LED2 6 P4LED1 6 P1MDIBN 5 P4LED0 6 P3MDICN 5 P4MDIBN 5 P4MDIAN 5 P3MDIDP 5 P4MDIBP 5 P4MDIAP 5 P4MDICN 5 P4MDICP 5 P3MDIDN 5 Title SizeDocument NumberRev Date:Sheet of Page 4 1.1Custom 46Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheetof Page 4 1.1Custom 46Thursday, July 26, 2012 Title SizeDocument NumberRev Date:Sheetof Page 4 1.1 AGSW 503 Custom 46Thursday, July 26, 2012 C44 0.1uF/10V C0402 C44 0.1uF/10V C0402 C52 0.1uF/10V C0402 C52 0.1uF/10V C0402 R104.7K/5%R0402R104.7K/5%R0402 C42 0.1uF/10V C0402 C42 0.1uF/10V C0402 D2 1N4148 D2 1N4148 C49 0.1uF/10V C0402 C49 0.1uF/10V C0402 R144.7K/5% R0402 R144.7K/5% R0402 C51 0.1uF/10V C0402 C51 0.1uF/10V C0402 C45 0.1uF/10V C0402 C45 0.1uF/10V C0402C39 1uF/6.3V C0402 C39 1uF/6.3V C0402 C41 0.1uF/10V C0402 C41 0.1uF/10V C0402 C35 0.1uF/10V C0402 C35 0.1uF/10V C0402 C50 0.1uF/10V C0402 C50 0.1uF/10V C0402 C55 0.1uF/10V C0402 C55 0.1uF/10V C0402 R154.7K/5% R0402 R154.7K/5% R0402 C40 1uF/6.3V C0402 C40 1uF/6.3V C0402 U3 24C08A/SOP8 U3 24C08A/SOP8 A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 WP 7 VCC 8 R114.7K/5%R0402R114.7K/5%R0402 C34 0.1uF/10V C0402 C34 0.1uF/10V C0402 R124.7K/5%R0402R124.7K/5%R0402 C33 0.1uF/10V C0402 C33 0.1uF/10V C0402 C32 0.1uF/10V C0402 C32 0.1uF/10V C0402 C58 0.01uF/16V C0402 C58 0.01uF/16V C0402 C26 0.1uF/10V C0402 C26 0.1uF/10V C0402 R134.7K/5%R0402R134.7K/5%R0402 C31 0.1uF/10V C0402 C31 0.1uF/10V C0402 C48 0.1uF/10V C0402 C48 0.1uF/10V C0402 C47 0.1uF/10V C0402 C47 0.1uF/10V C0402 C46 0.1uF/10V C0402 C46 0.1uF/10V C0402 R8 1.5K/5% R0402 R8 1.5K/5% R0402 C54 0.1uF/10V C0402 C54 0.1uF/10V C0402 L7 SBK160808T-121Y-N L0603L7 SBK160808T-121Y-N L0603 C57 1uF/6.3V C0402 C57 1uF/6.3V C0402 C24 27pF/50V C0402 C24 27pF/50V C0402 R16 2.49K/1% R0402 R16 2.49K/1% R0402 Y1 25MHz Y1 25MHz C56 0.1uF/10V C0402 C56 0.1uF/10V C0402 C29 1uF/6.3V C0402 C29 1uF/6.3V C0402 C43 0.1uF/10V C0402 C43 0.1uF/10V C0402 C28 0.1uF/10V C0402 C28 0.1uF/10V C0402 C53 0.1uF/10V C0402 C53 0.1uF/10V C0402 C27 1uF/6.3V C0402 C27 1uF/6.3V C0402 L6 SBK160808T-121Y-N L0603L6 SBK160808T-121Y-N L0603 RTL8367 (QFP128) U4 RTL8367 (QFP128) U4 P2MDIAP 122 AVDDH 14 P3MDIBP 6 P3MDIAN 5 P3MDIBN 7 RTT2 19 P2MDIAN 123 P2MDIBP 124 P2MDIBN 125 AVDDL 8 P3MDIAP 4 P2MDICP 127 P2MDIDP 1 P2MDICN 128 P2MDIDN 2 P3MDICP 10 P3MDICN 11 P3MDIDP 12 P3MDIDN 13 AVDDL 36 P4MDIAN 32 P4MDIBP 33 P4MDIBN 34 AVDDH 41 P4MDICP 37 P4MDICN 38 P4MDIDP 39 P4MDIDN 40 XTALO 93 P0MDIDN 107 DVDDIO 21 P0MDIBP 101 AVDDL 103 AVDDH 20 P0MDIBN 1…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). FCC PART 15B, CLASS B TEST REPORT For Lanready Technologies Inc. 3F,NO.166,Sinhu 2nd Rd.,Neihu District,Taipei,Taiwan ,ROC Report Type: Original Report Product Type: 5-Port 10/100/1000Mbps Green Switch Test Engineer: Star Xie Report Number: R1DG121019009-00 Report Date: 2012-11-16 Reviewed By: Harry Wu EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID:SCDDS505 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R1DG121019009-00 FCC Part15B, Class B Page 2 of 15 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 3 SYSTEM TEST CONFIGURATION .......................................................................................................................... 4 JUSTIFICATION ............................................................................................................................................................. 4 EUT EXERCISE SOFTWARE .......................................................................................................................................... 4 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 4 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 4 EXTERNAL I/O CABLE .................................................................................................................................................. 4 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 FCC §15.107 – AC LINE CONDUCTED EMISSIONS ............................................................................................. 7 MEASUREMENT UNCERTAINTY .................................................................................................................................... 7 EUT SETUP .................................................................................................................................................................. 7 EMI TEST RECEIVER SETUP ......................................................................................................................................... 7 TEST PROCEDURE ........................................................................................................................................................ 8 TEST EQUIPMENT LIST AND DETAILS ........................................................................................................................... 8 TEST RESULTS SUMMARY ............................................................................................................................................ 8 TEST DATA .................................................................................................................................................................. 8 FCC §15.109 - RADIATED EMISSIONS ................................................................................................................. 11 MEASUREMENT UNCERTAINTY .................................................................................................................................. 11 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ....................................................................................................................................... 11 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 12 TEST RESULTS SUMMARY .......................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 13 DECLARATION LETTER ........................................................................................................................................ 15 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R1DG121019009-00 FCC Part15B, Class B Pag…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conduction Emissions - Front View Conduction Emissions - Side View Below 1GHz: Radiated Emissions - Front View Below 1GHz: Radiated Emissions - Rear View