SRD50140Data Logger

Explanation of Symbols ! DANGER These entries are actions that, if taken, may cause serious personal physical damage or death. ! CAUTION These entries are actions that if taken may lead to physical injury or damage to persons or things. Denotes an im- portant warning or caution. Denotes a forbid- den action. Denotes an action that should be carried out. ! DANGER To Prevent Serious Accidents Do not disassemble, repair or modify the unit. Do not use the unit in any environment that is exposed to chemicals and harmful gases. Doing so may cause corrosion and/or other danger to the product. Also, coming in con- tact with hazardous substances may cause bodily harm to the user or people nearby. This product is not water resistant. Only use in an environment where there is no con- densation or possibility of becoming wet. If liquid enters the product, immediately remove the battery and stop using it. Do not insert or replace batteries with wet hands. Please be careful not to touch the product during or after use in overly hot or cold envi- ronments. It may cause burns or frostbite. This product has been designed for private and/or industrial use only. It should not be used in situations where strict safety precautions are necessary such as with medical equipment, or in systems directly or indirectly connected with human life. Do not drop or expose the unit to a strong impact. To prevent damage to the unit from static electricity, remove static electricity from your body by touching metal around you (such as a door knob and window frame) before touching the unit. Store the unit and battery out of the reach of children. If the unit produces heat, emits smoke or a strange smell, or makes unusual noise, immediately remove the battery and stop using it. Contact with oil may cause cracks to appear in the casing of the unit. Do not use in areas where oils are present. ! DANGER Places NOT Suitable for Installation and Storage • Areas exposed to excessive vibration • Areas exposed to excessive smoke, dust or dirt. • Areas exposed to direct sunlight • Areas exposed to water leakage • Areas subject to condensation or wet areas • Areas subject to direct flames or heaters, as well as areas in which hot air accumulates and creates extremely high temperatures • Areas exposed to static electricity • Areas exposed to strong magnetic fields ! CAUTION Precautions for Battery ・ There is a risk of fire or explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (AA alkaline) of battery. ・ Do not disassemble, modify, mechanically crush or cut the battery, as it may cause battery leakage, overheating, explosion or fire. ・ Do not dispose of a battery into fire or a hot oven as this can result in an explosion. • Do not leave a battery in an extremely high temperature surrounding environment or subjected to extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. • Do not install the battery in the wrong direction. Doing so may result in product malfunction, battery leakage, overheating or explosion. • If battery fluid gets on your eyes or skin, wash thoroughly with clean water. See a doctor immediately if it gets in your eyes. • The supplied battery is non-rechargeable and should not be recharged. • Use in high or low temperature environments will result in a shortening of the battery life. • If the unit is not to be used for a long period of time, remove batteries. Leaving batteries inside the unit may cause battery leakage and malfunction. ! CAUTION Others • Use the product in the specified operating environment, and do not use in any other purposes than those intended. • If the product gets dirty, wipe it with a clean cloth. • Battery terminals may provide insufficient contact due to age or vibration. This may lead to data loss. • Please be careful not to let a third party know of your registration code. The registration code cannot be reissued or changed. © Copyright T&D Corporation. All rights reserved. 2023. 3 16504740048（1st Edition） Thermo Recorder Safety Instructions and Specifications Thank you for purchasing our product. Please read carefully the following safety instructions and specifications to prevent damage to personnel and property, and to ensure safe and proper use of this product. Compliance Information <For FCC Model> FCC and ISED Statement This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party : TandD US, LLC Santa Fe, New Mexico https://tandd.com/ Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC Class B Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to…

Text truncated - open the document above for the full version.

817-1 Shimadachi Matsumoto, Nagano 390-0852 Japan TEL +81-263-40-0131 FAX +81-263-40-3152 https://www.tandd.com/ CFR 47 §2.911 (d)(5) Attestation Date: March 6, 2023 FCC ID: SRD50140 To: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 TandD Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. TandD Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Akemi Oana TandD Corporation

CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Date: April 7, 2023 FCC ID: SRD50140 To: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC US Agent FRN: 0033460759 Agent Company Name: TandD US, LLC Agent US Address: 534 N. Guadalupe St., #32886 SANTAFE, NM 87506 Agent Contact Name: Stephen Knuth Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of TandD Corporation (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Signature: Stephen Knuth TandD US, LLC

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: April 10, 2023 FCC ID: SRD50140 To: UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 TandD Corporation (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person: Stephen Knuth Company Name: TandD US, LLC Company Address: 534 N. Guadalupe St., #32886, Santa Fe, NM 87506 Email: [email protected] Sincerely yours, Akemi Oana TandD Corporation

817-1 Shimadachi Matsumoto, Nagano 390-0852 Japan TEL +81-263-40-0131 FAX +81-263-40-3152 https://www.tandd.com/ Letter of Authorization Date: March 6, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: TandD Corporation FCC ID: SRD50140 To whom it may concern: We, the undersigned, hereby authorize Akiko Nishimura of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Akemi Oana TandD Corporation

817-1 Shimadachi Matsumoto, Nagano 390-0852 Japan TEL +81-263-40-0131 FAX +81-263-40-3152 https://www.tandd.com/ Request for Confidentiality Date: March 6, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant : TandD Corporation FCC ID : SRD50140 To whom it may concern: Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459: Block Diagram Theory of Operation Schematics Parts List The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Akemi Oana TandD Corporation

817-1 Shimadachi Matsumoto, Nagano 390-0852 Japan TEL +81-263-40-0131 FAX +81-263-40-3152 https://www.tandd.com/ Request for Short-Term Confidentiality Date: March 6, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID : SRD50140 Applicant : TandD Corporation To whom it may concern: Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization based on the FCC rules 0.457 and 0.459: External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Akemi Oana TandD Corporation

Front right left up down Battery part back

85 TANDD おんどとりease 36 Certification Label Tamper-proof Pan Head LR Machine Screw(x4) Serial Label TR32B Appearance Drawing Weight (with Battery) : About 65 g Certification Label Scale 2：1 Φ5.5 Unit:mm will be replaced by the official certification number after the product is certified XXX-XXXXXX Upper Case, Lower Case, Battery Cover：Polycarbonate (Mitsubishi Chemical Corporation「Iupilon N5R」 )File No.E41179 ・Min.thickness：1mm Display Panel：Polycarbonate (AGC「CARBOGLASS C110C」) ・Min.thickness：1mm Certification Label ・Material: PET ・Surface: Laminated Durable and does not peel off. Enlarged view The label is placed in the battery compartment. The product is shipped without a battery installed. The user will see the label when installing the battery. 設計 製図 検図 承認 内 容 年 月 日 担当 株式会社 ティアンドデイ 材料 処理 品名 製品コード 0 0.5 0.5 6 6 30 30 120 120 350 350 1000 ±0.05 ±0.1 ±0.5 ±0.8 1 2 3 ±0.2 ±0.3 差 公 度 尺 量 数 1:1 岡崎 23.03.07

TR32B board photo MATERIAL OF PCB: FR4 HEATING CLASS: UL94-V0 File No.E622552022/12/6 kawayanagi front side reverse side

UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com April 6, 2023 FCC ID: SRD50140 To whom it may concern, We, UL Japan, Inc, hereby declare that Data Logger, model: TR32B (FCC ID: SRD50140) of TandD Corporation is exempt from RF exposure SAR evaluation as its output power meets the exclusion limits stated in KDB 447498D01(v06). KDB 447498D01(v06) has the following exclusion for portable devices: The 1g and 10g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz •Power and distance are rounded to the nearest mW and mm before calculation •The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. This device has f = 2.48 GHz and distance = 5 mm (minimum separation distance: 5 mm was used in the calculation) and the maximum average output power was 1 mW So for this device: 1 mW[maximum average output power]/5 mm[minimum separation distance]*√2.48 = 0.3 *This is less than 3.0, so no SAR is required. Even taking into account the tolerance, this device can be satisfied with the limits. Thank you for your attention to this matter. Takumi Shimada Engineer

0.3048 B B B B B B 0.508 A A 0.508 0.762 0.762 3.302 A A A A A A A 0.3048 1.524 1.3 4.196 1.016 A=0.508 B=0.635 GND GND PBC Antenna Specification ・Type:Inverted F Antenna ・Frequency Range:2.4GHz ・Gain:0.12dBi ・PCB:t=1mm ・Copper:t=18μm 岡崎蒲 PCB Antenna 設計 製図 検図 承認 内 容 年 月 日 担当 株式会社 ティアンドデイ 材料 処理 品名 製品コード 0 0.5 0.5 6 6 30 30 120 120 350 350 1000 ±0.05 ±0.1 ±0.2 ±0.3±0.5 ±0.8 1 2 3 差 公 度 尺 位 単 10:1 Doc.No.TR32B_アンテナパターン図 mm

Prüfbericht - Produkte Test Report - Products TÜV Rheinland Japan Ltd.  Global Technology Assessment Center  4-25-2 Kita-Yamata  Tsuzuki-ku  Yokohama 224-0021  Japan Tel.: +81 45 914 3888  Mail: [email protected]  Web: www.tuv.com Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Auftrags-Nr.: Order No.: 150275898 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client Reference No.: N/A Auftragsdatum: Order Date: 2023-03-07 Auftraggeber: Client: T&D Corporation 817-1 Shimadachi, Matsumoto, Nagano 390-0852 Japan Prüfgegenstand: Test Item: Data Logger Bezeichnung / Typ-Nr.: Identification / Type No.: TR32B Serien-Nr.: Serial No.: AUT-T1 Auftrags-Inhalt: Order Content: Radio Testing Prüfgrundlage: Test Specification: Antenna Radiation Pattern Measurement Wareneingangsdatum: Date of Receipt: 2023-03-20 Prüfmuster-Nr.: Test Sample No.: A003437590 Prüfzeitraum: Testing Period: 2023-03-29 Ort der Prüfung: Place of Testing: Yokohama EMC Laboratory Prüflaboratorium: Testing Laboratory: TÜV Rheinland Japan Ltd. Prüfergebnis*: Test Result*: Pass Überprüft von: Reviewed by: Datum: 2023-04-04 Date: Daisuke Watanuki Stellung / Position: Inspector Genehmigt von: Authorized by: Datum: 2023-04-04 Date: Pin Zhang Stellung / Position: Reviewer Sonstiges / Other: Zustand des Prüfgegenstandes bei Anlieferung: Condition of the Test Item at Delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 2 von 9 Page 2 of 9 REVISIONS Report No. Issue date Changes / Remarks JP23OV32 001 2023-04-04 Original document Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 3 von 9 Page 3 of 9 Contents 1. GENERAL REMARKS ................................................................................................ 4 1.1 TEST REPORT PURPOSE .......................................................................................... 4 1.2 COMPLEMENTARY MATERIALS ................................................................................. 4 2. TEST SITES ............................................................................................................. 4 2.1 TEST FACILITIES ..................................................................................................... 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 5 3. GENERAL PRODUCT INFORMATION ........................................................................... 6 3.1 PRODUCT FUNCTION AND INTENDED USE .................................................................. 6 3.2 RATINGS AND SYSTEM DETAILS ............................................................................... 6 4. TEST SETUP AND OPERATION MODES....................................................................... 6 4.1 TEST METHODOLOGY .............................................................................................. 6 4.2 OPERATION MODES ................................................................................................. 6 4.3 PHYSICAL CONFIGURATION FOR TESTING.................................................................. 7 5. TEST RESULTS OF ANTENNA PATTERN MEASUREMENT.............................................. 8 5.1 RADIATED MEASUREMENTS ..................................................................................... 8 5.1.1 Radiated Spurious Emissions of Transmitter............................................................................ 8 APPENDIX A ...................................................................................................................... 9 Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 4 von 9 Page 4 of 9 1. General Remarks 1.1 Test Report Purpose The purpose of this test report is to measure antenna radiation patterns in 3 axes (X/Y/Z) and calculate maximum antenna gains. 1.2 Complementary Materials There is no attachment to this test report. 2. Test Sites 2.1 Test Facilities TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan The test facility is recognized by the Federal Communications Commission (FCC) as Accredited Testing Laboratory under designation number JP0017. The test facility is accredited by VLAC (member of ILAC) under number VLAC-017 according to ISO/IEC 17025:2017. Note: The testing subject to this present report is out of scope of these accreditations. Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 5 von 9 Page 5 of 9 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment Kind of Equipment Manufacturer Model Name Serial Number Equip. ID Cal. Interval Cal. Date Next Cal. Measurement Software TUV Rheinland Japan Ltd. RF Measurem ents 2017-12- 07 RF-0754 N/A N/A N/A EMI Receiver Rohde & Schwarz ESW 44 101751 RF-0809 1 year 2023-09-27 2024-09-27 Signal Generator Rohde & Schwarz SMB100A 175171 RF-1191 1 year 2023-01-06 2024-01-06 Horn Antenna (TX) Schwarzbeck BBHA9120 B 420 RF-0051 1 year 2022-07-24 2023-07-24 Horn Antenna (RX) Schwarzbeck BBHA9120 B 419 RF-0050 N/A N/A N/A Conform…

Text truncated - open the document above for the full version.

Test Report No. : 14550825H-C-R1 Page : 1 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No.: 14550825H-C-R1 Customer TandD Corporation Description of EUT Data Logger Model Number of EUT TR32B FCC ID SRD50140 Test Regulation FCC Part 15 Subpart C Test Result Complied (Refer to SECTION 3) Issue Date April 7, 2023 Remarks - Representative Test Engineer Approved By Takumi Nishida Engineer Takumi Shimada Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 21.0 Test Report No. : 14550825H-C-R1 Page : 2 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No.: 14550825H-C This report is a revised version of 14550825H-C. 14550825H-C is replaced with this repor t. Revision Test Report No. Date Page Revised Contents - (Ori ginal) 14550825H-C December 21, 2022 - 1 14550825H-C-R1 April 7, 2023 Cover Page and Section 1: Customer Information -Correction of Company Name T&D Corporation → TandD Corporation 1 14550825H-C-R1 April 7, 2023 Section 4.2: Configuration and Peripherals Description of EUT and Support Equipment -Correction of Manufacturer T&D Corporation → TandD Corporation 1 14550825H-C-R1 April 7, 2023 Section 4.2: Configuration and Peripherals <Radiated Emission Test> List of Cables Used -Correction of cable length for No.1: DC Cable 0.1 m → 0.3 m  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation bod y.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided from the custome r for this report is identified in Section 1.  For test report(s) referred in this report, the latest version (includin g any revisions) is always referred. Test Report No. : 14550825H-C-R1 Page : 3 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics En gineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Develo pment Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technolo gy BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectriques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. : 14550825H-C-R1 Page : 4 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer Information ...................................................................................................... 5 SECTION 2: Equipment Under Test (EUT) ...........................................................................…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No.: JP23OV32 001 Seite 1 von 4 Page 1 of 4 Appendix B Setup Photos Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 2 von 4 Page 2 of 4 1. Photographs of the Test Setup Photograph 1: Setup Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 3 von 4 Page 3 of 4 Photograph 2: X-Y Axis Photograph 3: Y-Z Axis Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: JP23OV32 001 Seite 4 von 4 Page 4 of 4 Photograph 4: Z-X Axis

Test Report No. : 14550825H-C-R1 Page : 33 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 APPENDIX 3: Photographs of Test Setup Radiated Spurious Emission Below 1 GHz (Horizontal: X-axis / Vertical: X-axis) Above 1 GHz (Horizontal: Z-axis / Vertical: Y-axis) Photo 1 Photo 2 Test Report No. : 14550825H-C-R1 Page : 34 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Worst Case Position Below 1 GHz (Horizontal: X-axis / Vertical: X-axis) Above 1 GHz (Horizontal: Z-axis / Vertical: Y-axis) X-axis Y-axis Z-axis Test Report No. : 14550825H-C-R1 Page : 35 of 35 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Antenna Terminal Conducted Tests Photo 1 Photo 2 End of Report