T583GC101R150Mbps Wireless-N 3G Broadband Router

netis Wireless-N 3G Router User Manual V1.1 2011-06-02 Wireless-N 3G Router User Manual 1 / 69 Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user‟s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment Wireless-N 3G Router User Manual 2 / 69 Package Contents The following items should be found in your package:  Wireless-N 3G Router  Power adapter  Quick Installation Guide Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from. Brand and Copyright Announcement Copyright © 2010 Netis Corporation. All rights reserved is a registered trademark of Netis Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Reproduction in any manner without the permission of Netis Corporation is strictly forbidden All the information in this document is subject to change without notice. Wireless-N 3G Router User Manual 3 / 69 Contents 1. INTRODUCTION ................................................................................................................................... 6 1.1. PRODUCT OVERVIEW ......................................................................................................................... 6 1.2. MAIN FEATURES ............................................................................................................................... 6 1.3. SUPPORTING STANDARD AND PROTOCOL ................................................................................................ 7 1.4. WORKING ENVIRONMENT................................................................................................................... 7 2. HARDWARE INSTALLATION .................................................................................................................. 8 2.1. SYSTEM REQUIREMENT ...................................................................................................................... 8 2.2. PANEL ............................................................................................................................................ 8 2.3. RESTORE TO FACTORY CONFIGURATION .................................................................................................. 9 2.4. HARDWARE INSTALLATION PROCEDURES ............................................................................................... 10 3. LOGIN ................................................................................................................................................ 11 3.1. CONFIGURE COMPUTER ................................................................................................................... 11 3.1.1. Windows 98/Me ................................................................................................................ 11 3.1.2. Windows 2000 ................................................................................................................... 12 3.1.3. Windows XP ...................................................................................................................... 15 3.1.4. Windows Vista/7 ............................................................................................................... 18 3.1.5. MAC OS ............................................................................................................................. 22 3.2. CHECKING CONNECTION WITH THE ROUTER .......................................................................................... 24 3.3. LOGIN .......................................................................................................................................... 25 4. SYSTEM CONFIGURATION ...........................................................................................…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: NETIS SYSTEMS CO., LTD. Address: 9F, B Block, Tsinghua Information Park, High-tech Industrial Park, Nanshan City: Shenzhen State: N/A Country: China Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s): Product description: 150Mbps Wireless-N 3G Broadband Router Type designation: 3G-C101 Trademark: netis on our behalf. Date: 2011-04-11 City: Shenzhen Name: Selena Bai Function: PD Assistant Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-AUG-09 RF_501, Issue 5 Page 1 of 1 Company Name: NETIS SYSTEMS CO., LTD. Address: 9F, B Block, Tsinghua Information Park, High-tech Industrial Park, Nanshan City: Shenzhen Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: T583GC101R Reference number: XXXXXX Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2011-04-11 Name and signature of applicant: Selena Bai Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Neutron Engineering Inc. Project No.: 1104C004 Page 2 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 2 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 3 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 3 of 7 1104C004 1104C004

Label location

Neutron Engineering Inc. Project No.: 1104C004 Page 4 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 4 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 5 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 5 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 6 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 6 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 7 of 7 1104C004 1104C004 Neutron Engineering Inc. Project No.: 1104C004 Page 7 of 7 1104C004 1104C004

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: T583GC101R Project No. : 1104C004 Equipment : 150Mpbs Wireless-N 3G Broadband Router Model : 3G-C101 Applicant : NETIS SYSTEMS CO.,LTD. Address : 9F,B Block,Tsinghua Information Park, High-tech Industrial Park,Nanshan,Shenzhen,China According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Ant. Brand name Model Name Antenna TypeConnector Gain (dBi) 1 GEQI G020-1002 8-A Dipole AntennaN/A 5.0 TEST RESULTS EUT： 150Mbps Wireless-N 3G broadband Router Model Name ： 3G-C101 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX B MODE CH01/CH06/CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 5 3.1623 21.1500 130.3167 0.082025781 Complies 5 3.1623 20.8400 121.3389 0.07637485 1 Complies 5 3.1623 20.6100 115.0800 0.072435321 Complies Neutron Engineering Inc. EUT： 150Mbps Wireless-N 3G broadband Router Model Name ： 3G-C101 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX G MODE CH01/CH06/CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 5 3.1623 23.52 224.9055 0.141563201 Complies 5 3.1623 23.96 248.8857 0.156657201 Complies 5 3.1623 24.11 257.6321 0.162162481 Complies EUT： 150Mbps Wireless-N 3G broadband Router Model Name ： 3G-C101 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX N20MHz MODE CH01/CH06/CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 5 3.1623 22.44 175.3881 0.110395251 Complies 5 3.1623 21.97 157.3983 0.099071871 Complies 5 3.1623 22.31 170.2159 0.107139691 Complies EUT： 150Mbps Wireless-N 3G broadband Router Model Name ： 3G-C101 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX N40MHz MODE CH03/CH06/CH09 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 5 3.1623 22.11 162.5549 0.102317611 Complies 5 3.1623 21.41 138.3566 0.087086411 Complies 5 3.1623 21.83 152.4053 0.095929101 Complies

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 1 of 116 FCC Radio Test Report FCC ID: T583GC101R This report concerns (check one) : Original Grant Class II Change Issued Date : May. 27, 2011 Project No. : 1104C004 Equipment : 150Mbps Wireless-N 3G Broadband Router Model Name : 3G-C101 Applicant : NETIS SYSTEMS CO., LTD. Address : 9F,B Block,Tsinghua Information Park, High-tech Industrial Park,Nanshan,Shenzhen,China Manufacturer : Shenzhen Netcore Industrial Ltd. Address : 9F,B Block,Tsinghua Information Park, High-tech Industrial Park,Nanshan,Shenzhen,China Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Apr. 20, 2011 Date of Test: Apr. 20, 2011 ~ May. 26, 2011 Testing Engineer : (Ares Liu) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 2 of 116 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 3 of 116 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 5 . BANDWIDTH TEST 72 5.1 APPLIED PROCEDURES / LIMIT 72 5.1.1 MEASUREMENT INSTRUMENTS LIST 72 5.1.2 TEST PROCEDURE 72 5.1.3 DEVIATION FROM STANDARD 72 5.1.4 TEST SETUP 73 5.1.5 EUT OPERATION CONDITIONS 73 5.1.6 TEST RESULTS 74 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 4 of 116 Table of Contents Page 6 . PEAK OUTPUT POWER TEST 82 6.1 APPLIED PROCEDURES / LIMIT 82 6.1.1 MEASUREMENT INSTRUMENTS LIST 82 6.1.2 TEST PROCEDURE 82 6.1.3 DEVIATION FROM STANDARD 82 6.1.4 TEST SETUP 82 6.1.5 EUT OPERATION CONDITIONS 82 6.1.6 TEST RESULTS 83 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 85 7.1 APPLIED PROCEDURES / LIMIT 85 7.1.1 MEASUREMENT INSTRUMENTS LIST 85 7.1.2 TEST PROCEDURE 85 7.1.3 DEVIATION FROM STANDARD 85 7.1.4 TEST SETUP 85 7.1.5 EUT OPERATION CONDITIONS 85 7.1.6 TEST RESULTS 86 8 . POWER SPECTRAL DENSITY TEST 106 8.1 APPLIED PROCEDURES / LIMIT 106 8.1.1 MEASUREMENT INSTRUMENTS LIST 106 8.1.2 TEST PROCEDURE 106 8.1.3 DEVIATION FROM STANDARD 106 8.1.4 TEST SETUP 106 8.1.5 EUT OPERATION CONDITIONS 106 8.1.6 TEST RESULTS 107 9 . EUT TEST PHOTO 115 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 5 of 116 1. CERTIFICATION E q u i p m e n t : 150Mbps Wireless-N 3G Broadband Router Brand Name : netis Model Name : 3G-C101 A p p l i c a n t : NETIS SYSTEMS CO., LTD. F a c t o r y : Dongguan City Netcore Network Technology Co.,Ltd. A d d r e s s : No.10-1,Sankeng Road,Qinghutou,Tangxia Town,Dongguan City Date of Test : Apr. 20, 2011 ~ May. 26, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1104C004) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 6 of 116 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(b)(3) Peak Output Power PASS 15.209/15.…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 115 of 116 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 115 of 116 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 116 of 116 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1104C004 Page 116 of 116 Radiated Measurement Photos